Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu

: Attachments : General guidelines for filling up the Attachments Package No.: N2JM/C&M/CS/15(26)

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

Package No.: N2JM/C&M/CS/15(26)

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 4, 4(A), 4(B), 5, 5(A), 6, 9, 10, 11, 12, 13, 15, 16, 18. 19 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 14 Integrity Pact: Not Applicable.

6 Attachment 18 Safety Pact: To be submitted as per ITB Clause No. 9.3(s) and as per remarks in the Attach 18.

7 Attachment 20: Declaration of Key Managerial Person and Power of Attorney holder: Format is annexed Seperetely herewith this Volume :

8 Attachment 21: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII Order and MoP Order, if applicable: Format is annexed Seperetely herewith this Volume

9 Attachment 22: Undertaking regarding submission of original/Hard copy part of the bid except for Bid Security: Format is annexed Seperetely herewith this Volume

10 Attachment 22: Declaration by the bidder regarding events encountered pursuant to ITB Clause 2.1: Format is annexed Seperetely herewith this Volume

11 Attachment 24: Compliance to the process related to the e-RA Terms & Conditions and the Bussiness Rules governing the e-RA: Format is annexed Seperetely herewith this Volume

11 Attachment 23: Certification by the Bidder per order no. F.No.6/18/ 2019-PPD dated 23/07/2020 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order) in line with ITB 2.1: Format is annexed Seperetely herewith this Volume

12 Attachment 24- Affidavit regarding Compliance of DMI&SP

13 Attachment-26: Declaration by the bidder for ‘Code of Integrity for Public procurement’

Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

Package No.: N2JM/C&M/CS/15(26) Sole Bidder 1

JV (Joint Venture) 2 or More

Enter following details of the bidder

Specify type of Bidder SOLE BIDDER 0

Name of Sole Bidder

Address of Sole Bidder

Package No.: N2JM/C&M/CS/15(26) Attachment-3(QR)

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

(Qualifying Requirement Data)

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - II

Grid Bhawan, OB-26, Rail Head Complex,

Jammu - 180 012 (J&K).

Fill the required details in Attach QR

Date : Printed Name :

Place : Designation :

Package No.: N2JM/C&M/CS/133(22) Attachment-QR

Tile work in Kitchen of Residential Colony and Main Hall of Field Hostel floor ( D-Type) at 400/220 KV Panchkula Sub Station

Qualifying Requirement Data

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - II

Grid Bhawan, OB-26, Rail Head Complex,

Jammu - 180 012 (J&K).

Dear Ladies and/or Gentlemen,

In support of the additional information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our details/documents etc., alongwith other information, as follows:

We are furnishing the following details/document in support of qualifying requirement for the subject package(s).

Qualification of bidder will be based on meeting the minimum pass/fail criteria specified below regarding the Bidder’s technical experience and financial position as demonstrated by the Bidder’s responses in the corresponding Bid Schedules. Technical experience and financial resources of any proposed subcontractor(s) shall not be taken into account in determining the Bidder’s compliance with the qualifying criteria. The bid can be submitted by an individual/ joint venture firm. At any stage of evaluation if any shortcoming/ discrepancy/ deficiency is observed in the documents/ details submitted by the bidder and or it is observed that the bidder is not meeting the stipulated QR, respective bid shall be summarily rejected. The owner may assess the capacity and capability of the bidder, to successfully execute the scope of work covered under the package within stipulated completion period. This assessment shall inter-alia include (i) Document verification; (ii) Bidder’s works visit (if required), (iii) Details of works executed, works in hand, anticipated in future & the balance capacity for the present scope of work; (iv) Details of plants and machinery, manpower and financial resources; (v) Details of quality system in place; (vi) past experience and performance; (vii) customers feedback; (viii) Banker’s feedback; etc.

1.1 Technical Experience:

1.1.1 Bidder should have completed the work/ project of Similar Work# during the last seven years ending last day of month previous to the one in which NIT is being floated: (Cost of work/ Project should be excluding the cost of land) i. One single work/ project of a value of not less than Rs. 109.59 Lakhs (80% of estimated cost) or ii. Two works/ projects, each of a value of not less than Rs.68.49 Lakhs (50% of estimated cost) or iii. Three works/ projects, each of a value of not less than Rs. 54.79 Lakhs (40% of estimated cost) # Similar work shall imply “Building Works”

1 Name of the work

2 Name of the Client

3 Address of Client

4 Contact Details of Client Authorised Dealer/Sub dealer

5 Work Order Details Authorised Representative

Date Certificate of Authorized Dealership Submitted

Authorization of Manufacturer Submitted

6 Copy of Work order uploaded

Please upload Work Order Name of Manufacturer

7 Date of Completion of Work No

8 Completed amount for the work (Rs. Lakh) OBD 01-05-16

Five Years 01-06-11

7 Document submitted as Proof of Completion

Completion Cerificate No

8 Details of Document for Proof of Completion Any other document, authenticated by the client

Reference No. MAAT 127

9 Proof of Completion Uploaded Two Work

Please upload Proof of Completion

Work 2 (if any)

1 Name of the work

2 Name of the Client

3 Address of Client

4 Contact Details of Client

5 Work Order Details

6 Copy of Work order uploaded

Please upload Work Order

7 Date of Completion of Work

8 Completed amount for the work (Rs. Lakh)

7 Document submitted as Proof of Completion

8 Details of Document for Proof of Completion

9 Proof of Completion Uploaded

Please upload Proof of Completion

Work 3 (if any)

1 Name of the work

2 Name of the Client

3 Address of Client

4 Contact Details of Client Authorised Dealer/Sub dealer

5 Work Order Details Authorised Representative

Date Certificate of Authorized Dealership Submitted

Authorization of Manufacturer Submitted

6 Copy of Work order uploaded

Please upload Work Order Name of Manufacturer

7 Date of Completion of Work No

8 Completed amount for the work (Rs. Lakh) OBD 01-05-16

Five Years 01-06-11

7 Document submitted as Proof of Completion

Completion Cerificate No

8 Details of Document for Proof of Completion Any other document, authenticated by the client

Reference No. MAAT 127

9 Proof of Completion Uploaded Two Work

Please upload Proof of Completion

1.2 Financial position

Minimum Average Annual Turnover (MAAT)* of the bidder should be Rs. 205.47 Lakhs for best three financial years out of last five financial years commencing from Financial Year 2016-17. *Note: - Annual Gross revenue from operations/ gross operating income as incorporated in the profit & loss account excluding other income.

Performance Report from Client

Acceptance of Final Bill by Client

Sr. No. Financial Year Turnover (in Rs. Lakh) Copy of Balance Sheet & P/L Account Uploaded Certificate from CA

a 2016-17 Any Other (Please Specify)

Average Turnover for Best Three Years #NUM!

The bidder shall furnish following documents/details with its bid a) The bidder shall submit documents in support of meeting the technical experience mentioned at Para 1.1 above in the form of LOA/ Work order & completion certificate/payment certificate or any other document evidencing the same. b) The bidder shall submit audited / certified copies of Balance Sheet and Profit and Loss account in support of meeting the financial position as mentioned at Para 1.2 . Note-I : In the event the bidder is not able to furnish the information of its own (i.e., separate), being a subsidiary company and its accounts are being consolidated with its group/ holding/ parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/ holding/ parent company) duly certified by any one of the authority [(i) Statutory Auditor of the bidder or (ii) Company Secretary of the bidder certifying that such information / documents are based on the audited accounts as the case may be). Note II: Similarly, if the bidder happens to be group/ holding/ parent company, the bidder should submit the above documents/ information of its own (i.e., exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/ documents are based on the audited accounts as the case may be.

Relaxation for MSEs/ STARTUPS MSEs^/ START-UPs^^ meeting the necessary requirements shall also be considered qualified if they meet 80% (Eighty percent) of the requirements of Minimum Average Annual financial turnover (MAAT ) for the best three financial years out of the last five financial years as above. ^MSEs as defined in bidding documents. ^^START-Ups as defined by DIPP, applicable as on the originally scheduled date of bid

1 Copy of PAN Card Uploaded

Please upload Copy of PAN Card

1.1 PAN Card Number

2 Status of the Bidder

3 MOA & AOA/ Certificate of Incorporation Uploaded

Please upload Copy of Relevent Document

Date : Printed Name : #NUM!

Place : Designation : #NUM!

Private Limited Company

Public Limited Company

Affidavit of Proprietorship Uploaded

Parnership Deed Uploaded

MOA & AOA/ Certificate of Incorporation Uploaded

Package No.: N2JM/C&M/CS/15(26) Attachment-5(A)

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - II

Grid Bhawan, OB-26, Rail Head Complex,

Jammu - 180 012 (J&K).

1. We hereby furnish the details of the items, components, raw material, services which we propose to buy / avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the subject package.

Sl. No. Item Description Quantity Proposed to be bought / sub-contracted Name of Micro and Small Enterprises (MSEs)

Name Category (Micro or Small)

2. The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms & Procedures, Volume-Iof Bidding Documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract.

Date : Printed Name :

Place : Designation :

Package No.: N2JM/C&M/CS/15(26) Attachment-6

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - II

Grid Bhawan, OB-26, Rail Head Complex,

Jammu - 180 012 (J&K).

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : Printed Name :

Place : Designation :

Package No.: N2JM/C&M/CS/15(26) Annexure I toAttachment-6

(Alternative, Deviations and Exceptions to the Provisions)

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : Printed Name :

Place : Designation :

Package No.: N2JM/C&M/CS/15(26)

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - II

Grid Bhawan, OB-26, Rail Head Complex,

Jammu - 180 012 (J&K).

We declare that we are aware of and have gone through the "Code of Business Conduct and Ethics for Senior Management Personnel" and "Code of Business Conduct and Ethics for Board Members" of POWERGRID (hereinafter referred to as the "Code of Conduct"). We further understand that as per the "Code of Conduct", Senior Management Personnel including Board Members, who have retired / resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred "Code of Conduct", within 1 year from the date of cessation of service / directorship unless approved by the Competent Authority.

Accordingly, We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

*In case the date of joining in the bidder's organization of such ex-employee is within 1 year from the date of retirement / resignation from POWERGRID, No Objection Certificate / approval from the Competent Authority must be furnished alongwith the bid or subsequent through clarification pursuant to ITB Clause 21.

In case of non-submission of No Objection Certificate / approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and Procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard.

We further declare that any misrepresentation or submission of false / forged documenmts / information in this regard shall be dealt with as per the provisions of the Integrity Pact and / or the Bidding Documents and / or POWERGRID's policy and procedure.

Date : Printed Name :

Place : Designation :

1. "Code of Business Conduct and Ethics for Senior Management Personnel" and "Code of Business Conduct and Ethics for Board Members" are available on POWERGRID's website http://www.powergridindia.com.

2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated '-' against the same, it shall be deemed that they have not employed any such person in their organization.

Package No.: N2JM/C&M/CS/15(26)

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - II

Grid Bhawan, OB-26, Rail Head Complex,

Jammu - 180 012 (J&K).

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : Printed Name :

Place : Designation :

Package No.: N2JM/C&M/CS/15(26)

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

(Work Completion Schedule)

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - II

Grid Bhawan, OB-26, Rail Head Complex,

Jammu - 180 012 (J&K).

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package i.e., Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu. for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

1 Detailed Engineering and drawing submission Shall be as per Delivery Schedule (Completion Period) given in SCC. Hence Not Required to be Filled here.

a) commencement

2 Procurement of equipment/ components & assembly

a) commencement

a) commencement

4 Manufacturing

a) commencement

5 Shipments & Delivery

a) commencement

6 Establishment of site office

7 Installation at Site

a) commencement

8 Testing & Pre-commissioning

a) commencement

9 Trial Operation

a) commencement

Date : Printed Name :

Place : Designation :

Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.

Package No.: N2JM/C&M/CS/15(26)

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - II

Grid Bhawan, OB-26, Rail Head Complex,

Jammu - 180 012 (J&K).

I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:

Interest Bearing Initial Advance

Supply Portion: NOT APPLICABLE No

Services Portion: NOT APPLICABLE No

II We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1 Name of the Supplier/ Contractor in whose favour payment is to be made

2 Address with PIN Code and State

Registered Office:

Correspondence Address:

3. (a) Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3. (b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order [Indicate Yes / No]

Note: Documentary evidence is to be attached. Please refer remarks at the end of the attachment.

3. (c) If 3(b) is 'Yes' please mention whether you are (Proprietary MSE/ Partnership MSE/ Private Limited Company) owned by SC/ST entrepreneurs

3. (d) Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment Order 2018 including subsequent amendment/notification/order [Indicate Yes / No]

Note: Documentary evidence is to be attached.

4 Permanent Account (PAN) No.

5 GSTIN Numbers

I. GSTIN in the Sates/UT from where the supply of goods take place

Name of the States/UT GSTIN number

II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

Name of the States/UT GSTIN number

9 PF Registration No. of the Company

10 PF Regional Office covered (with Address)

11 Name of Contact Person

12 Contact Details

13 Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account: Saving Account

14 9 digit MICR code printed at bottom in middle, next to cheque no.

15 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Remarks: The definition of MSEs owned by SC/ST is as given under:

a. In case of proprietary MSE, proprietor(s) shall be SC/ST.

b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.

c. In case of Private Limited Companies, at least 51% share shall be held by SC/ST promoters.

Documentary Evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.

Date : Printed Name :

Place : Designation :

Package No.: N2JM/C&M/CS/15(26)

Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu.

(Additional Information)

Bidder’s Name and Address (Sole Bidder): To:

Contract & Material Department

Name : Power Grid Corporation of India Ltd.,

Address : Northern Region Transmission System - II

Grid Bhawan, OB-26, Rail Head Complex,

Jammu - 180 012 (J&K).

In support of the additional information required as per ITB Sub-Clause 9.3 (q) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(q)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Bidder (Sole Bidder)

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

(iii) As per para BDS/ITB clause 9.3 q, Bidder shall furnish the details of their Provident Fund Code Number

Sl. No. Name of Bidders/JV Partners Provident Fund Code Number Details

2.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(q)(ii)]

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3 Details regarding previous transgressions of Integrity Pact

The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country.

3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years

Year Name of client Details of Transgression of Integrity Pact by the bidder

4.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders (individual firms or each partners of JV) should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Total Liability

Current Liability

Profit before taxes

Profit after taxes

4.3 Provident Fund Code Number of the Bidder:

Date : Printed Name :

Place : Designation :

Package No.: N2JM/C&M/CS/15(26) Bid Form 1st Envelope 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No.: 5 five 5 th 5 May

Date: 6 six 6 th #REF! 6 June

7 seven 7 th #REF! 7 July

To: 8 eight 8 th #REF! 8 August

Contract & Material Department 9 nine 9 th #REF! 9 September

Power Grid Corporation of India Ltd., 10 ten 10 th 10 October

Northern Region Transmission System - II 11 eleven 11 th 11 November

Grid Bhawan, OB-26, Rail Head Complex, 12 twelve 12 th 12 December

Jammu - 180 012 (J&K). 13 thirteen 13 th

14 fourteen 14 th

Name of Contract : Civil Renovation/Facelifting work of ED Residence at POWERGRID Residential Colony Jammu. 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

1.0 Having examined the Bidding Documents, including Amendment Nos. ...[Enter the Amendment]… dated …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in single envelope. ...[Enter the Amendment]… …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in single envelope. 17 seventeen 17 th

1.1 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.

2.0 Attachments to the Bid Form Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th

(a) Attachment 1: Bid Security Bank Guarantee INR Banks certified Cheque Zero 20 twenty 20 th

(b) Attachment 2 : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Please note that if bid validity is less than 07 (seven) months, your bid may be rejected Bank Guarantee (0) 21 st

(c) Attachment 3 (QR) & Attach QR: The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3 (c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). FDR 22 th

SOLE BIDDER CDR/TDR Applicable 23 th

"(d) Attachment 4, D25 In order to facilitate evaluation of bids, deviations, if any, from the terms and conditions or Technical Specifications shall be listed in Attachment 4 to the bid. The Bidder is required to provide the cost of withdrawal for such deviations. However, the attention of the bidders is drawn regarding the rejection of bids that are not substantially responsive to the requirements of the Bidding Documents. 0 Not Applicable 24 th

(e) Attachment 5 : Information regarding ex-employees of Employer in Bidder’s firm. 25 th

(g) Attachment 6 : Not Applicable 26 th

(h) Attachment 7 : NOT APPLICABLE Declaration regarding Social Accountability 27 th

(i) Attachment 8 : Work Schedule 28 th

(j) Attachment 9 : Information for E-payment, PF details and declaration regarding /Small & Medium Enterprises 29 th

(k) Attachment 10 : Additional Information 30 th

(s) Attachment 18 : Safety Pact

(t) Attachment 19 : Declaration.

(u) Attachment 20 : Declaration of Key Managerial Person jointly with Power of Attorney Holder

(v) Attachment 21 : Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII Order and MoP Order, if applicable

(w) Attachment 22: Declaration by the bidder regarding events encountered pursuant to ITB Clause 2.1

(y) Attachment 24: Compliance to the process related to the e-RA Terms & Conditions and the Bussiness Rules governing the e-RA

(x) Attachment 23: Certification by the Bidder per order no. F.No.6/18/ 2019-PPD dated 23/07/2020 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order) in line with ITB 2.1

(y) Attachment 24: Affadavit regarding Compliance of DMI&SP

(aa) Attachment 26: Declaration by the bidder for ‘Code of Integrity for Public procurement’

3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

4.3 We also understand that, in case of award on us, you shall pay directly, if so required /reimburse to us octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items, which shall be dispatched directly from the sub-vendor’s works to the Employer’s site (sale-in-transit). Further, Service Tax, if applicable, for the services to be rendered by us, the same is included in our bid price in Second Envelope.

4.2 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.5 We confirm that no Sales Tax/VAT in any form shall be payable by you for the bought out items which shall be despatched directly by us under the First Contract (as referred in para 5.1 below) [or Letter of Award, if 5.1 Not applicable] to the project site. However, you will issue requisite Sales Tax declaration/Vatable forms in respect of such bought out items, on production of documentary evidence of registration with the concerned Sales Tax Authorities.

5.0 Construction of the Contract

5.1 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, insurance, unloading, storage, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents. We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.

6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

(a) ITB 13 Bid Security

(b) GCC 2.14 Governing Law

(c) GCC 55.0 Terms of Payment

(d) GCC 8.3 Performance Security

(e) GCC 6.0 Taxes and Duties

(f) GCC 4.0 Time for Commencement and Completion

(g) GCC 40.0 Defect Liability

(h) GCC 39.0 Functional Guarantee

(i) GCC 61.0 Limitation of Liability

(j) GCC 57.0 Settlement of Disputes

(k) GCC 59.0 Arbitration

Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award/Letter of Award/Work Order to us, and to achieve the completion within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of 180 (One Hundred Eighty) days from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:-

Name and address of agent Amount and Currency Purpose of Commission or gratuity

(If none, state “none”)

13.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.

14.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

15.0 We, hereby, declare that we, along with our associate/ collaborators/ sub-contractors/ subvendors/consultants/ service providers shall strictly adhere to the POWERGRID Whistle Blower and Fraud Prevention Policy. We, along with our associate / collaborator / subcontractors / sub-vendors / consultants / service providers shall observe the highest standard of ethics and shall not indulge or allow anybody else working in our organization to indulge in fraudulent activities during execution of the contract and would immediately apprise the Employer about any fraud or suspected fraud as soon as it comes to our notice.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : Printed Name :

Place : Designation :

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated : 2

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 (Package No.: N2JM/C&M/CS/15(26)) Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 (Package No.: N2JM/C&M/CS/15(26)) Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Checklist for Bid Submission

1 Certificate regarding Constitution of firm/ Certificate of Incorporation To be submitted in Soft Copy.

2 Soft copy of Attachments & Bid Form Duly Filled Excel Sheet of Attachment and Bid Form to be uploaded in Soft Copy along with Bid. To be submitted in Soft Copy.

3 Power of Attorney (POA) Duly notarized (on Stamp Paper of requisite value), indicating that the person(s) signing the bid has(ve) the authority to sign the bid In case of bid submitted by a Joint Venture of two or more firms as partners, if allowed as per stipulated Qualification Requirements in Annexure-A (BDS), bidder shall submit. Power of Attorney for Joint Venture and Joint Venture Agreement as per given format Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

4 Affidavit of Proprietorship (applicable only for proprietorship firm) Duly notarized (on Stamp Paper of requisite value) Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

5 Tender Fees/ Cost of Bid Documents NOT APPLICABLE NOT APPLICABLE

6 MSE Status Certificate (if applicable) In case of UAM/ Udyam Registration, Bidder has to submit the Complete Audited Account Statements (Balance Sheet and Profit and Loss Account) for verification purpose. To be submitted in Soft Copy.

7 Bid Security The bid security shall, at the bidder’s option, be in the form of a crossed bank draft/pay order /banker certified cheque in favour of Employer or a bank guarantee from a reputed bank selected by the bidder. The format of the bank guarantee shall be in accordance with the form of bid security included in the Bidding Documents. Bid security shall be valid as per the provisions of the bidding documents. The Bid Security shall be in favour of Power Grid Corporation of India Limited payable at Jammu Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

8 Attachment-14: Integrity Pact NOT APPLICABLE NOT APPLICABLE

9 Attachment-18: Safety Pact To be submitted on a non-judicial stamp paper of Rs. 100/-. (in two originals, Signed on each page by Power of Attorney Holder and duly witnessed) Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

10 Attachment 20: Declaration of Key Managerial Person jointly with Power of Attorney holder Signed by CEO/Managing Director/Company Secretary/ Director/ CFO/ any of the partner in case of partnership firm/ any other officer entrusted with substantial powers of the management of the affairs of the company/firm and POA Holder Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

11 Attachment 21: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII Order and MoP Order (In case of a Joint Venture bid, the declaration shall be given by all partners of the Joint Venture) To be submitted on a non-judicial stamp paper of Rs. 100/-. (in originals, Signed on each page by Power of Attorney Holder and duly witnessed) Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

12 Attachment-22: Declaration by the bidder regarding events encountered pursuant to ITB Clause 2.1. (In case of a Joint Venture bid, the declaration shall be given by all partners of the Joint Venture) On Firm/Company's Letterhead To be submitted in Soft Copy.

13 Attachment-23: Certification by the Bidder as per order no. F.No.6/18/2019-PPD dated 23/07/2020 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order) in line with ITB 2.1 (In case of a Joint Venture bid, the declaration shall be given by all partners of the Joint Venture) On Firm/Company's Letterhead To be submitted in Soft Copy.

14 Attachment-24:Affidavit by the bidder regarding Compliance of DMI&SP policy To be submitted on a non-judicial stamp paper of Rs. 100/-. (in originals, Signed on each page by Power of Attorney Holder and duly witnessed) Submission of Hard copy in ‘Original’ and uploading of Scanned Copy

15 Attachment-26:Declaration by the bidder for ‘Code of Integrity for Public procurement’ On Firm/Company's Letterhead To be submitted in Soft Copy.

16 PF Registeration Details To be submitted in Soft Copy.

NOTE: This checklist is not exhaustive and issued for the purpose of reference Only. In case of any ambiguity, the provisions of Bidding Documents shall prevail.

Summary pf cost estimate for the work of "Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project"

Sl. No. Description of work Amount (In INR) Remarks

1 CIVIL PORTION (DSR+NON DSR) #REF!

2 Air Conditioning system #REF!

3 FFS System #REF!

4 CCTV system #REF!

5 Electrical system (DSR+NON DSR) #REF!

Total (including GST) #REF!

GST Compliant BOM for Civil Portion for the work of " Civil Renovation work of ED Residence at POWERGRID Residential Complex Jammu"

Sl. No. SAP Activity Code Item No. Description of Item Units Quantity HSN Code GST Rate

1 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

a 120000439 4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) cum 2.78 995454 18%

2 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

a 120000607 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 2.07 995456 18%

3 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

a 120000618 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 5.4 995456 18%

4 120000620 6.15 Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. sqm 5.4 995456 18%

5 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

a 120000739 8.2.2.2 Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm sqm 33 995474 18%

6 120000743 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each 4 995474 18%

7 8.28 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :

a 120000847 8.28.1 Decorative veneer facings of approved manufacture sqm 14.94 995476 18%

8 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

10 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

a 120000812 9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 14.7 995476 18%

11 9.22 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)

a 120000814 9.22.1 On one side only sqm 29.4 995476 18%

12 120000815 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). sqm 14.7 995476 18%

13 120000957 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. each 2 995476 18%

14 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

a 120001000 9.101.2 Twin rubber stopper each 8 995476 18%

15 120001387 12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. sqm 11.8 995453 18%

16 13.1 Cement Plaster (in fine sand) 12 mm cement plaster of mix :

17 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

a 120001467 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) sqm 615.187 995473 18%

18 120001511 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete sqm 131.92 995472 18%

19 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

20 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

a 120001522 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 369.683 995473 18%

21 13.99 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

120001614 13.99.1 One or more coats on old work. sqm 18.293 995419 18%

22 120003397 13.114 Melamine polishing on wood work (one or more coat). sqm 35.28 995421 18%

23 100006049 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. each 3 995431 18%

24 120003297 14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall metre 30 995419 18%

25 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

a 120001641 15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) cum 2.78 995429 18%

26 120001643 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. cum 4.58 995429 18%

27 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

a 120001661 15.12.1 Of area 3 sq. metres and below each 18 995419 18%

b 120001661 15.12.2 Of area beyond 3 sq. metres each 5 995419 18%

28 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

a 120001677 15.23.1 For thickness of tiles 10 mm to 25 mm sqm 92.359 995419 18%

29 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

30 120001720 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. each 3 995419 18%

31 120001727 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 113.515 995419 18%

32 120001731 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum 30 995419 18%

33 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

a 120002104 18.7.3 25 mm nominal dia Pipes metre 15 995424 18%

35 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

a 120002109 18.8.2 20 mm nominal dia Pipes metre 55 995424 18%

b 120002110 18.8.3 25 mm nominal dia Pipes metre 10 995424 18%

36 Providing and fixing UPVC SWR Pipe for Soil and waste discharge system conforming to IS : 13592 Type B, including jointing with seal ring and solvent, (i) Single socketed pipes.

Providing and fixing UPVC SWR Pipe fittings for Soil and waste discharge system conforming to IS : 14735, including jointing with seal ring and solvent.

170001811 NS-5 Coupler (75 mm dia) each 3 995478 18%

170001811 NS-6 Coupler (110 mm dia) each 7 995478 18%

170001811 NS-7 Coupler (160 x 160 mm dia) each 3 995478 18%

170001811 NS-8 Coupler (160 x 110 mm dia) each 3 995478 18%

170001811 NS-9 Coupler (160 x 75 mm dia) each 2 995478 18%

170001811 NS-10 Coupler (110 x 75 mm dia) each 3 995478 18%

170001811 NS-11 Coupler (50 x 50 mm dia) each 3 995478 18%

170001811 NS-12 Plain Bend (75 mm dia) each 5 995478 18%

170001811 NS-13 Plain Bend (110 mm dia) each 6 995478 18%

170001811 NS-14 Plain Bend (160 x 160 mm dia) each 2 995478 18%

170001811 NS-15 Plain Bend (50 mm dia) each 3 995478 18%

170001811 NS-16 Door Bend (75 mm dia) each 5 995478 18%

170001811 NS-17 Door Bend (110 mm dia) each 5 995478 18%

170001811 NS-18 Door Tee (75x75x75 mm dia) each 5 995478 18%

170001811 NS-19 Door Tee (110x110x100 mm dia) each 5 995478 18%

170001811 NS-20 Door Tee (110x110x75 mm dia) each 5 995478 18%

170001811 NS-21 Door Tee (160 x 110 mm dia) each 3 995478 18%

170001811 NS-22 Plain tee (110 x 110 mm dia) each 3 995478 18%

170001811 NS-23 Plain tee (75 x 75 mm dia) each 3 995478 18%

170001811 NS-24 Plain tee (50 mm dia) each 3 995478 18%

170001811 NS-25 Floor Trap (110 x 75 mm dia) each 6 995478 18%

170001811 NS-26 Floor Trap (110 x 110 mm dia) each 6 995478 18%

170001811 NS-27 Vent Cowl (75 mm dia) each 3 995478 18%

170001811 NS-28 Vent Cowl (110 mm dia) each 3 995478 18%

170001811 NS-29 Half Bend 110 x 110 mm each 3 995478 18%

170001811 NS-30 Half Bend 75 x 75 mm each 3 995478 18%

170001811 NS-31 Reducing Tee 160 x 110 mm each 6 995478 18%

37 170001532 NS-32 Providing and fixing Health Faucet with 1.2 m flexible tube and wall hook Jaquar make Item code ALD-573 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995411 18%

38 170001513 NS-33 Providing and fixing click clack Waste Coupling 32 mm size full thread Jaquar make item code ALD-727 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995411 18%

39 170003922 NS-34 Providing and fixing Bottle Trap (with internal partition) 32mm size 250 mm & 190 mm long wall connection pipes & wall flange Jaquar make item code ALD-769L250x190 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995421 18%

40 170001519 NS-35 Providing and fixing Angular stop cock with wall flange Jaquar make item code OPP-15053PM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 20 995411 18%

41 170001450 NS-36 Providing and fixing 2 Way Bib Cock with wall flange Jaquar make item code OPP-15041PM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995462 18%

42 170002127 NS-37 Providing and fixing exposed part kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal (compatible with ALD-083, ALD-089 & ALD-081) Jaquar make item code OPP-15083KPM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995478 18%

43 170002094 NS-38 Providing & Fixing of Wall mixer Non- Telephonic Shower Arrangement with Connecting legs & Wall Flanges Jaquar make Item Code FLR-CHR-5219N all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent as per the discretion of Engineer-in-Charge. each 1 995424 18%

44 170001416 NS-39 Providing and fixing Single Towel Rail 600mm Long, Stainless Steel Jaquar make item code AKP-35711PS all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995479 18%

45 170002129 NS-40 Providing and fixing Towel Ring Square Jaquar make item code AKP-35721P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 5 995478 18%

46 170000791 NS-41 Providing and fixing Soap Dish Holder Jaquar make item code AKP-35731P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 5 995411 18%

47 170001536 NS-42 Providing and fixing Toilet Roll Holder Jaquar make item code AKP-35751P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995411 18%

48 170002165 NS-43 Providing and fixing Double Coat Hook Jaquar make item code AKP-35761P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995411 18%

49 170001203 NS-44 Providing and fixing Reduced Body of concealed Stop Cock suitable for 15mm Pipe Line with Plastic Protection Cap (without exposed parts). Jaquar make item code ALD-069FT all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995424 18%

50 170001123 NS-45 Providing and fixing Soap Dispenser Push Button Jaquar make item code SDR-WHT-DJ0010F all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1 995415 18%

51 170001514 NS-46 Providing and fixing Hand Dryer Flash touch-free infrared hand dryer with 1150W rated power & carbon brush motor Material : 304 Stainless Steel and Finish: Stainless Steel Finish Jaquar make item code HDR-SSF-AK2807 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 5 995411 18%

52 170003067 NS-47 Supplying, fixing & Installing 300 mm Tower Bolts of Godrej make all complete. each 8 995411 18%

53 170002122 NS-48 Supplying, fixing & Installing Door Locks of Godrej make item code DC4880PONEH15DLAB all complete. each 4 995478 18%

54 170001583 NS-49 Supplying & Fixing of Square Drain CP Jali 150 x 150 mm each 8 995416 18%

55 170001434 NS-50 Providing & Fixing of 2 LT Opal Glass Wall Lamp Jaquar Make Item Code DBL-CHR-MB48012D all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995479 18%

56 170001423 NS-51 Providing and laying Premium Quality Vitrified floor tiles (Matt) of size 600x600 mm (thickness to be specified by the manufacturer) of approved shade and colour laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. sqm 22.243 995479 18%

57 NS-52 Providing and fixing Premium Quality Glazed Vitrified Wall Tile Kajaria make or equivalent (thickness to be specified by the manufacturer), of approved shade and textures of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over existing plastered surface , laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS:15477, in average 6 mm thickness and finshing complete as per directions of Engineer-in-charge.

59 170001049 NS-53 Providing and fixing ready made PVC Moulding of 25-50 mm wide and 12-18 mm thickness including P.U Paint in desired shade and finish.All complete as per architectural drawing and as directed by Engineer-in-charge. metre 65 995416 18%

60 170001397 NS-54 WPC Louvers Panelling - Providing and fixing of WPC (Wood Polymer Composite) louver panels over existing wall/partition/frame of approved size,shade and design.All complete as per architectural drawing and as directed by Engineer-in-charge. sqm 27 995479 18%

61 170000688 NS-55 Providing and fixing Drawer units of 450mm deep made in 18mm thick plywood (IS 710) frame work finished with High Gloss laminate of approved shade. This also includes providing necessary hardware like handles, telescopic channels etc of approved make. The internal surfaces of the Drawers units shall be laminated with 1.0mm white laminate . All the exposed internal and external surface of the plywood surface shall be finished in laminate of approved shade with 2mm thick imported rigid PVC edge lipping of approved shade as per the detailed drawing. sqm 3.24 995476 18%

62 170001242 NS-56 Providing and laying of wall paper of approved make laid over the existing surfaces after cleaning the existing surfaces, scrapping and rubbing with sand paper, using wall paper adhesive to match the shade of wall paper. The rate shall include cost of material, conveyance, seigniorage charges on material, labour charges on operations complete etc. for finished item of surfaces. Payment shall be made for the exposed area only. The rate to include cost of Wall paper, Wastages and Synthetic resin etc. Item is to be completed in all respects as per the direction of Engineer-In-Charge & strictly in accordance with the approved architectural drawings. sqm 15 995419 18%

63 170002130 NS-57 Providing and fixing of PVC made photo frames with size varying in between 1' to 2' x 1' to 2' inclusive of best quality coloured/black & white printed image as per the image approved /provided in soft format by the Engineer-In-charge , water proof backing sheet and transparent glass covering in front, and fixed on site all complete as per the approved Architectural drawing and & pattern approved by Engineer-in-charge. each 9 995468 18%

64 170000702 NS-58 Providing and fixing ultra LED Rope light in colour warm white of approved make all complete as per architectural drawing and as directed by Engineer-in-charge. metre 25 995461 18%

65 170001547 NS-59 Providing and fixing in position suspended, rigid monolithic POP false ceiling made out of following : a) Supply & Installation of GI Channels, Cross, Angle,hangers frame made out of 24 Guage GI Section fixed rigid in position with grid not increasing 750 x 750 mm size , as per ceiling design and drawings. b) Supply & Installation of GI Jali over frame with washers , nuts,screws and bolts. c) Supply & Installation of POP Paste over jali work smooth in level as per design & drawings and to the discretion of EIC. sqm 131.92 995411 18%

66 170001034 NS-60 Providing and fixing Counter Top basin Size(mm) 575x430x175 Jaquar make item code ACS-WHT-87901 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent each 4 995416 18%

67 170001534 NS-61 Providing and fixing Wall Hung WC with UF Soft Close Seat Cover, Hinges, fixing accessories and accessories set, S Trap-300 mm size (390x710x730) mm Jaquar make item code ACS-WHT-87953BIUFSM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995411 18%

68 170002958 NS-62 Providing & Fixing Control Plate Alive For Wall Hung WC Jaquar make Item Code JCP-CHR-852415 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995411 18%

69 170001531 NS-63 Providing & Fixing Single Piece Slim Concealed Cistern with Floor Mountaing Frame Jaquar make Item Code JCS-WHT-2400FS all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995411 18%

70 170002097 NS-64 Providing & Fixing of Concealed Part of JOYSTICK Basin Mixer Jaquar make Item Code ARC-CHR-87233C all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995424 18%

71 170002097 NS-65 Providing & Fixing of Exposed Part Kit of JOYSTICK Basin Mixer Wall Mounted Jaquar make Item Code ARC-CHR-87233K all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995424 18%

72 170000791 NS-66 Providing & Fixing of Soap Dispenser Jaquar make Item Code AKP-CHR-35735P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995411 18%

73 170001434 NS-67 Providing & fixing of LED Light Mirror of size 600 x 800 with anti-frost feature all complete. each 4 995479 18%

74 170001123 NS-68 Providing & Fixing of Tumbler holder Jaquar Make Item Code AKP-CHR-35741P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995415 18%

75 170002097 NS-69 Providing & Fixing of Aquamax Exposed Part Kit Jaquar make Item Code ARC-CHR-87681K all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995424 18%

76 170002097 NS-70 Providing & Fixing of Bath Tub spout Jaquar make Item Code SPJ-CHR-87463 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995424 18%

77 170001044 NS-71 Providing & Fixing of Square Shape Maze Hand Shower Jaquar make Item Code HSH-CHR-1655 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995416 18%

78 170001044 NS-72 Providing & Fixing of Square Shape Single Flow Maze Overhead Shower Jaquar make Item Code OHS-CHR-1639 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995416 18%

79 170002097 NS-73 Providing & Fixing of Sliding Rail Jaquar make Item Code SHA-CHR-1183 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995424 18%

80 170001523 NS-74 Providing & Fixing of Shower Arm Jaquar make Item Code SHA-CHR-455L600 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995411 18%

81 170001416 NS-75 Providing & Fixing of Towel Rack Jaquar make Item Code AKP-CHR-35781 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995479 18%

82 170001416 NS-76 Providing & Fixing of Grab Bar 300mm long Jaquar make, Item Code AKP-CHR-35701PS all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995479 18%

83 170001442 NS-77 Providing & Fixing of Glass Enclosure Jaquar Make. Item Code JSE-CHR-OPTSDR1650SX all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent as per the discretion of Engineer-in-Charge. each 3 995468 18%

84 170002130 NS-78 Providing & Fixing of Double Arm Wall Mounted Mirror Jaquar Make Item Code CAN-CHR-1193N all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 3 995468 18%

85 170001830 NS-79 Providing and fixing factory-made uPVC glazed/wire mesh windows of Fenesta or equivalent brand, with lead-free multi-chambered frames, sashes, and mullions reinforced by galvanized mild steel sections as per CPWD specifications. Includes uPVC glazing beads, interlocks, inline sash adaptors, EPDM gaskets, SS 304 fasteners, polyamide sleeves, plastic packers/caps, required glazing, wire mesh , necessary screws all complete. Frames and mullions shall be mitre-cut, fusion welded/mechanically jointed, sealed at corners, and drilled for hardware and drainage. Gaps between frames and walls to be sealed with weatherproof silicone over backer rods. Steel reinforcement and uPVC profiles to conform to approved design and Engineer-in-Charge directions.

170001830 a Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: GF Location: GUEST ROOM System: Luxury Slider (uPVC) Design: Horizontal Slider OiX Colour : Foil 2S Foil 2S : Diamond Grey or other colour specified by EIC Slider OF Yes Bugscreen No Monsoon Guard Slider Sash S65 PS1 Slider Threshold with Threshold/118mm Handle Colour Black Hnd Outer Track Espag Patio Handle Mech Joint No Hurricane Bar No Bug Mesh Fibre Mesh BS Position Inside BS Midrail Type Normal BS Handle Espag Patio Handle Glazing SG CL_TGH 8MM Sqm 4.881 995476 18%

170001830 b Luxury Fixed casement window with frame (45 x 60 mm) or above, other specifications :- Window Code: GF Location: GUEST ROOM System: Luxury Casement Window (uPVC) Design: Fixed Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Glazing SG CL_TGH 8MM Sqm 1.201 995476 18%

170001830 c Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (90 mm x 45 mm) or above, specifications as under :- Window Code: GF Location: LOBBI System: Luxury Slider (uPVC) Design: Slider Door OiX Colour: Foil 2S Foil 2S: Diamond Grey or other colour specified by EIC Slider OF : Yes Bugscreen No Monsoon Guard Slider Sash: S65 PS1 Slider Threshold : with Threshold/118mm Handle Colour Black Hnd Outer Track : D Non Lck One Side Lvr One Side Plate Mech Joint : No Hurricane Bar : No Bug Mesh : Fibre Mesh BS Position Inside BS Midrail Type: Normal BS Handle: Espag Patio Handle Glazing: SG CL_TGH 8MM Sqm 4.976 995476 18%

170001830 d Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: GF Location: Drawing ROOM System: Luxury Slider (uPVC) Design: Horizontal Slider OiX Colour : Foil 2S Foil 2S : Diamond Grey or other colour specified by EIC Slider OF Yes Bugscreen No Monsoon Guard Slider Sash S65 PS1 Slider Threshold with Threshold/118mm Handle Colour Black Hnd Outer Track Espag Patio Handle Mech Joint No Hurricane Bar No Bug Mesh Fibre Mesh BS Position Inside BS Midrail Type Normal BS Handle Espag Patio Handle Glazing SG CL_TGH 8MM Sqm 2.963 995476 18%

170001830 e Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: GF Location: ROOM System: Luxury Slider (uPVC) Design: Horizontal Slider OiX Colour : Foil 2S Foil 2S : Diamond Grey or other colour specified by EIC Slider OF Yes Bugscreen No Monsoon Guard Slider Sash S65 PS1 Slider Threshold with Threshold/118mm Handle Colour Black Hnd Outer Track Espag Patio Handle Mech Joint No Hurricane Bar No Bug Mesh Fibre Mesh BS Position Inside BS Midrail Type Normal BS Handle Espag Patio Handle Glazing SG CL_TGH 8MM Sqm 1.21 995476 18%

170001830 f Premuim Casement window with top portion fixed with exhaust hole provision while as lower portion openable/top hung with frame (45mm x 45mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: GF Location: VENT 1 System: Premium Casement Window (uPVC) Design: Fix/Casement Awn Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Handle Colour Black Handle Type Swirl Handle PullDown BS No Glazing (G1)SG FROST_TGH 6MM EXHAUST HOLE 6INCH (G2)SG FROST_TGH 6MM Sqm 1.017 995476 18%

170001830 g Luxury bug Mesh for openable part of casement window with following specifications : Window Code: GF Location: VENT 1 System: Luxury Bug Mesh Design: Mesh Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Threshold with Threshold/65mm Mesh Type Pleated Mesh Shutter Single System Premium Casement 2K (uPVC) Sqm 0.592 995476 18%

170001830 h Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: GF Location: ROOM System: Luxury Slider Combination (uPVC) Design: (DFix.DFix)/(OiX) Colour : Foil 2S Foil 2S : Diamond Grey or other colour specified by EIC Slider OF Yes Bugscreen No Monsoon Guard Slider Sash S65 PS1 Handle Colour Black Hnd Outer Track Espag Patio Handle Mech Joint No Hurricane Bar No Bug Mesh Fibre Mesh BS Position Inside BS Midrail Type Normal BS Handle Espag Patio Handle Glazing SG CL_TGH 8MM Sqm 2.691 995476 18%

170001830 i Luxury Casement window with top portion fixed with exhaust hole provision while as lower portion openable (65mm x 50 mm) or above , sash (70 mm x 60 mm) or above, specifications as under :- Window Code: GF Location: Room System: Luxury Casement Window (uPVC) Design: Fix/Casement R Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Handle Colour Black Handle Type Swirl Handle Hinge Type : Easy clean PullDown BS No Glazing (G1)SG CL_TGH 8MM EXHAUST HOLE 6INCH (G2)SG CL_TGH 8MM Sqm 1.089 995476 18%

170001830 j Luxury bug Mesh for openable part of casement window with following specifications : Window Code: GF Location: Room System: Luxury Bug Mesh Design: Mesh Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Threshold with Threshold/65mm Mesh Type Pleated Mesh Shutter Single System Luxury Casement win (uPVC) Sqm 0.809 995476 18%

170001830 k Luxury Fixed casement window with frame (45 x 60 mm) or above, other specifications :- Window Code: FF Location: ROOM System: Luxury Casement Window (uPVC) Design: Fixed Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Glazing SG CL_TGH 8MM Sqm 2.344 995476 18%

170001830 l Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (90 mm x 45 mm) or above, specifications as under :- Window Code: FF Location: LOBBI System: Luxury Slider (uPVC) Design: Slider Door OiX Colour: Foil 2S Foil 2S: Diamond Grey or other colour specified by EIC Slider OF : Yes Bugscreen No Monsoon Guard Slider Sash: S65 PS1 Slider Threshold : with Threshold/118mm Handle Colour Black Hnd Outer Track : D Non Lck One Side Lvr One Side Plate Mech Joint : No Hurricane Bar : No Bug Mesh : Fibre Mesh BS Position Inside BS Midrail Type: Normal BS Handle: Espag Patio Handle Glazing: SG CL_TGH 8MM Sqm 2.38 995476 18%

170001830 m Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (90 mm x 45 mm) or above, specifications as under :- Window Code: FF Location: LOBBI System: Luxury Slider (uPVC) Design: Slider Door OiX Colour: Foil 2S Foil 2S: Diamond Grey or other colour specified by EIC Slider OF : Yes Bugscreen No Monsoon Guard Slider Sash: S65 PS1 Slider Threshold : with Threshold/118mm Handle Colour Black Hnd Outer Track : D Non Lck One Side Lvr One Side Plate Mech Joint : No Hurricane Bar : No Bug Mesh : Fibre Mesh BS Position Inside BS Midrail Type: Normal BS Handle: Espag Patio Handle Glazing: SG CL_TGH 8MM Sqm 7.462 995476 18%

170001830 n Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (90 mm x 45 mm) or above, specifications as under :- Window Code: FF Location: ROOM System: Luxury Slider (uPVC) Design: Slider Door OiX Colour: Foil 2S Foil 2S: Diamond Grey or other colour specified by EIC Slider OF : Yes Bugscreen No Monsoon Guard Slider Sash: S65 PS1 Slider Threshold : with Threshold/118mm Handle Colour Black Hnd Outer Track : D Non Lck One Side Lvr One Side Plate Mech Joint : No Hurricane Bar : No Bug Mesh : Fibre Mesh BS Position Inside BS Midrail Type: Normal BS Handle: Espag Patio Handle Glazing: SG CL_TGH 8MM Sqm 4.005 995476 18%

170001830 o Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: FF Location: ROOM System: Luxury Slider Combination (uPVC) Design: (DFix.DFix)/(OiX) Colour : Foil 2S Foil 2S : Diamond Grey or other colour specified by EIC Slider OF Yes Bugscreen No Monsoon Guard Slider Sash S65 PS1 Handle Colour Black Hnd Outer Track Espag Patio Handle Mech Joint No Hurricane Bar No Bug Mesh Fibre Mesh BS Position Inside BS Midrail Type Normal BS Handle Espag Patio Handle Glazing SG CL_TGH 8MM Sqm 2.551 995476 18%

170001830 p Premuim Casement window with top portion fixed with exhaust hole provision while as lower portion openable/top hung with frame (45mm x 45mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: FF Location: VENT 2 System: Premium Casement Window (uPVC) Design: Fix/Casement Awn Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Handle Colour Black Handle Type Swirl Handle PullDown BS No Glazing (G1)SG FROST_TGH 6MM EXHAUST HOLE 6INCH (G2)SG FROST_TGH 6MM Sqm 1.066 995476 18%

170001830 q Luxury bug Mesh for openable part of casement window with following specifications : Window Code: FF Location: VENT 2 System: Luxury Bug Mesh Design: Mesh Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Threshold with Threshold/65mm Mesh Type Pleated Mesh Shutter Single System Premium Casement 2K (uPVC) Sqm 0.617 995476 18%

170001830 r Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: FF Location: ROOM System: Luxury Slider Combination (uPVC) Design: (DFix.DFix)/(OiX) Colour : Foil 2S Foil 2S : Diamond Grey or other colour specified by EIC Slider OF Yes Bugscreen No Monsoon Guard Slider Sash S65 PS1 Handle Colour Black Hnd Outer Track Espag Patio Handle Mech Joint No Hurricane Bar No Bug Mesh Fibre Mesh BS Position Inside BS Midrail Type Normal BS Handle Espag Patio Handle Glazing SG CL_TGH 8MM Sqm 2.025 995476 18%

170001830 s Three track three panel luxury slider window with frame (118mm x 70mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: FF Location: ROOM System: Luxury Slider Combination (uPVC) Design: (DFix.DFix)/(OiX) Colour : Foil 2S Foil 2S : Diamond Grey or other colour specified by EIC Slider OF Yes Bugscreen No Monsoon Guard Slider Sash S65 PS1 Handle Colour Black Hnd Outer Track Espag Patio Handle Mech Joint No Hurricane Bar No Bug Mesh Fibre Mesh BS Position Inside BS Midrail Type Normal BS Handle Espag Patio Handle Glazing SG CL_TGH 8MM Sqm 2.699 995476 18%

170001830 t Premuim Casement window with left portion fixed while as other portion openable/top hung with frame (45mm x 45mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: FF Location: Dressing System: Premium Casement Window (uPVC) Design: Fix/Casement Awn Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Handle Colour Black Handle Type Swirl Handle PullDown BS No Glazing (G1)SG FROST_TGH 6MM EXHAUST HOLE 6INCH (G2)SG FROST_TGH 6MM Sqm 0.611 995476 18%

170001830 u Luxury bug Mesh for openable part of casement window with following specifications : Window Code: FF Location: Dressing System: Luxury Bug Mesh Design: Mesh Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Threshold with Threshold/65mm Mesh Type Pleated Mesh Shutter Single System Premium Casement 2K (uPVC) Sqm 0.305 995476 18%

170001830 v Premuim Casement window with top portion fixed with exhaust hole provision while as lower portion openable/top hung with frame (45mm x 45mm) or above , sash (70 mm x 45 mm) or above, specifications as under :- Window Code: FF Location: VENT 2 System: Premium Casement Window (uPVC) Design: Fix/Casement Awn Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Handle Colour Black Handle Type Swirl Handle PullDown BS No Glazing (G1)SG FROST_TGH 6MM EXHAUST HOLE 6INCH (G2)SG FROST_TGH 6MM Sqm 1.103 995476 18%

170001830 w Luxury bug Mesh for openable part of casement window with following specifications : Window Code: FF Location: VENT 2 System: Luxury Bug Mesh Design: Mesh Colour Foil 2S Foil 2S Diamond Grey or other colour specified by EIC Threshold with Threshold/65mm Mesh Type Pleated Mesh Shutter Single System Premium Casement 2K (uPVC) Sqm 0.63 995476 18%

86 170001897 NS-80 Providing and fixing fully laminated wooden wardrobes upto height of 3.00 m from FFL in bedrooms as per the approved drawings & attached technical specifications complete in all respects & as per the directions of Engineer-in-charge. Sqm 20.1 995478 18%

87 170001897 NS-81 Providing and fixing fully laminated wooden cabinets in kitchens with accessories as per the approved drawings & attached technical specifications complete in all respects & as per the directions of Engineer-in-charge. Sqm 6.5 995478 18%

88 NS-82 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture , sides of the granite stone resting on existing brick work supports with 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red

170002118 Area of slab over 0.50 sqm Sqm 4.14 995474 18%

89 170002118 NS-83 Providing and laying machine cut, mirror polished, italian marble for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture , sides of the italian marble resting on existing brick work supports with 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) , joints treated with white cement including pointing with white cement slurry admixed with pigment to match the italian marble shade including rubbing, curing, moulding and polishing etc. complete at all levels. Sqm 1.636 995474 18%

90 170003061 NS-84 Provinding and fixing kitchen chimney of make Glen 6059 2.5 Ft or equivalent including pipe and fitting complete as per instructions of Engineer In-charge each 1 995478 18%

91 170003061 NS-85 Providing and fixing Respite stainless steel Black Sink (36''x18'') of reputed make including all fittings complete as per instructions of Engineer In-charge each 1 995478 18%

Electrical Portion

1 1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

2 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

3 1.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

130000033 1.14.3 2x4 sq.mm + 1X4sqmm earthwire mtr 150 995461 18%

130000034 1.14.4 2x6 sq.mm + 1X6sqmm earthwire mtr 50 995461 18%

4 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

5 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

130000124 1.24.4 3 pin 5/6 A socket outlet each 25 995461 18%

130000126 1.24.6 Telephone socket outlet each 5 995461 18%

130000127 1.24.7 TV antenna socket outlet each 5 995461 18%

6 130000130 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. EACH 10 995461 18%

7 1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

8 130000145 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. EACH 25 995461 18%

9 130000146 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. EACH 25 995461 18%

10 1.5 Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

11 130000800 1.57 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. EACH 15 995461 18%

12 2.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

LIGHTING FIXTURES

13 8.4 LED Down lighter (COB Type) (System lumen efficacy ≥105 < 120 lm/Watt ). Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency>85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector.

14 8.7 LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Supplying, Installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm).

15 8.9 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, nstallation, Testing & Commissioning of LED surface mounted Batten light of ollowing body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

16 9.2 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.

170001617 9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each 10 995461 18%

GST Compliant BOM for Civil Portion for the work of "Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project"

Sl. No. SAP Activity Code Item No. Description of Item Units Quantity HSN Code GST Rate

1 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

a 120000439 4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) cum 4.13 995454 18%

2 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

a 120000607 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 6.12 995456 18%

3 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

a 120000618 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 48.54 995456.00 18%

4 120000620 6.15 Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. sqm 48.54 995456.00 18%

5 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

a 120000739 8.2.2.2 Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm sqm 29.57 995474.00 18%

6 120000743 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each 5 995474.00 18%

7 8.28 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :

a 120000847 8.28.1 Decorative veneer facings of approved manufacture sqm 29.34 995476.00 18%

8 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

10 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

a 120000812 9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 10.71 995476.00 18%

11 9.22 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)

12 120000815 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). sqm 10.71 995476.00 18%

13 120000957 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. each 6 995476.00 18%

14 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

15 9.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

16 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

a 120001000 9.101.2 Twin rubber stopper each 8 995476.00 18%

9 9.14 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately).

a 120001069 9.140.1 12 mm thick commercial ply conforming to IS : 1328 BWR type sqm 14.94 995476.00 18%

17 9.147A Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds

a 120003492 9.147C2.1 Fixed window / ventilator with mullion / transom. Using R1 series with frame (33 mm & above ) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre) sqm 1.62 995428.00 18%

b 170001830 9.147D1.2 Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles. Using R2 series with frame (39 mm & above) x (39 mm & above) & sash /mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre) sqm 1.32 995476.00 18%

c 170001830 9.147.F1.1 Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre). sqm 11.76 995476.00 18%

d 120003495 9.147.F2.1 Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above).(Height upto 2.5 metre). sqm 3.15 995428.00 18%

18 120001387 12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. sqm 85 995453.00 18%

19 13.1 Cement Plaster (in fine sand) 12 mm cement plaster of mix :

20 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

21 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

a 120001522 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 144 995473.00 18%

22 120003397 13.114 Melamine polishing on wood work (one or more coat). sqm 21.42 995421.00 18%

23 100006049 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. each 4 995431.00 18%

24 120003297 14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall metre 45 995419.00 18%

25 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

a 120001641 15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) cum 4.13 995429.00 18%

26 120001643 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. cum 15.48 995429.00 18%

27 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

a 120001660 15.12.1 Of area 3 sq. metres and below each 12 995419.00 18%

b 120001661 15.12.2 Of area beyond 3 sq. metres each 12 995419.00 18%

28 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

a 120001677 15.23.1 For thickness of tiles 10 mm to 25 mm sqm 277 995419.00 18%

29 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

30 120001720 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. each 4 995419.00 18%

31 120001727 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 141.34 995419.00 18%

32 120001728 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge. sqm 235.5 995419.00 18%

33 120001731 15.6 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum 95 995419.00 18%

34 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

a 120002104 18.7.3 25 mm nominal dia Pipes metre 9 995424.00 18%

35 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

a 120002109 18.8.2 20 mm nominal dia Pipes metre 45 995424.00 18%

b 120002110 18.8.3 25 mm nominal dia Pipes metre 10 995424.00 18%

36 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

a 120002800 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) sqm 13.98 995476.00 18%

37 MDSR 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

a 120002800 MDSR 21.3.3 With Frosted glass panes of 8 mm thickness (weight not less than 20 kg/sqm) sqm 8.4 995476.00 18%

Total for DSR Items (Including GST)

Modified Estimated Cost after using Correction factor on DSR 2023 on account of GST @ 0.973 as per CPWD Office Memorandum Dated :-08-08-2024

Amount after adding add Cost Index over DSR2023 rates @ 3% as per CPWD Office Memorandum Dated :-18-03-2025

Total Amount DSR Items (Including GST)

B Non-schedule items

1 Providing and fixing UPVC SWR Pipe for Soil and waste discharge system conforming to IS : 13592 Type B, including jointing with seal ring and solvent, (i) Single socketed pipes.

d 170001809 NS-4 Pipe 50 mm metre 5 995478 18%

2 Providing and fixing UPVC SWR Pipe fittings for Soil and waste discharge system conforming to IS : 14735, including jointing with seal ring and solvent.

a 170001811 NS-5 Coupler (75 mm dia) each 5 995478 18%

b 170001811 NS-6 Coupler (110 mm dia) each 10 995478 18%

c 170001811 NS-7 Coupler (160 x 160 mm dia) each 5 995478 18%

d 170001811 NS-8 Coupler (160 x 110 mm dia) each 5 995478 18%

e 170001811 NS-9 Coupler (160 x 75 mm dia) each 4 995478 18%

f 170001811 NS-10 Coupler (110 x 75 mmdia) each 5 995478 18%

g 170001811 NS-11 Coupler (50 x 50 mm dia) each 3 995478 18%

h 170001811 NS-12 Plain Bend (75 mm dia) each 5 995478 18%

i 170001811 NS-13 Plain Bend (110 mm dia) each 10 995478 18%

j 170001811 NS-14 Plain Bend (160 x 160 mm dia) each 4 995478 18%

k 170001811 NS-15 Plain Bend (50 mm dia) each 3 995478 18%

l 170001811 NS-16 Door Bend (75 mm dia) each 7 995478 18%

m 170001811 NS-17 Door Bend (110 mm dia) each 7 995478 18%

n 170001811 NS-18 Door Tee (75x75x75 mm dia) each 5 995478 18%

o 170001811 NS-19 Door Tee (110x110x100 mm dia) each 7 995478 18%

p 170001811 NS-20 Door Tee (110x110x75 mm dia) each 7 995478 18%

q 170001811 NS-21 Door Tee (160 x 110 mm dia) each 4 995478 18%

r 170001811 NS-22 Plain tee (110 x 110 mm dia) each 3 995478 18%

s 170001811 NS-23 Plain tee (75 x 75 mm dia) each 3 995478 18%

t 170001811 NS-24 Plain tee (50 mm dia) each 3 995478 18%

u 170001811 NS-25 Floor Trap (110 x 75 mm dia) each 10 995478 18%

v 170001811 NS-26 Floor Trap (110 x 100 mm dia) each 10 995478 18%

w 170001811 NS-27 Vent Cowl (75 mm dia) each 3 995478 18%

x 170001811 NS-28 Vent Cowl (110 mm dia) each 3 995478 18%

y 170001811 NS-29 Half Bend 110 x 110 mm each 3 995478 18%

z 170001811 NS-30 Half Bend 75 x 75 mm each 3 995478 18%

aa 170001811 NS-31 Reducing Tee 160 x 110 mm each 5 995478 18%

3 170001532 NS-32 Providing and fixing Health Faucet with 1.2 m flexible tube and wall hook Jaquar make Item code ALD-573 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995411 18%

4 170001513 NS-33 Providing and fixing click clack Waste Coupling 32 mm size full thread Jaquar make item code ALD-727 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 995411 18%

5 170003922 NS-34 Providing and fixing Bottle Trap (with internal partition) 32mm size 250 mm & 190 mm long wall connection pipes & wall flange Jaquar make item code ALD-769L250x190 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 995421 18%

6 170001531 NS-35 Providing and fixing Single Piece-WC with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, fixing accessories and accessories set, cistern fittings, S Trap-300 mm size (390x710x730) mm Jaquar make item code VGS-WHT-81853S300UF all complete. or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995411 18%

7 170001519 NS-36 Providing and fixing Angular stop cock with wall flange Jaquar make item code OPP-15053PM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 24 995411 18%

8 170001450 NS-37 Providing and fixing 2 Way Bib Cock with wall flange Jaquar make item code OPP-15041PM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995462 18%

9 170002127 NS-38 Providing and fixing exposed part kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal (compatible with ALD-083, ALD-089 & ALD-081) Jaquar make item code OPP-15083KPM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995478 18%

10 170004806 NS-39 Providing and fixing Single Lever Tall Boy with 150mm Extension Body Fixed Spout without Popup Waste System with 600 mm long braided hoses Jaquar make item code OPP-15005BPM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 995478 18%

11 170001416 NS-40 Providing and fixing Single Towel Rail 600mm Long, Stainless Steel Jaquar make item code AKP-35711PS all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995479 18%

12 170002129 NS-41 Providing and fixing Towel Ring Square Jaquar make item code AKP-35721P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995478 18%

13 170000791 NS-42 Providing and fixing Soap Dish Holder Jaquar make item code AKP-35731P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995411 18%

14 170001536 NS-43 Providing and fixing Toilet Roll Holder Jaquar make item code AKP-35751P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995411 18%

15 170002165 NS-44 Providing and fixing Double Coat Hook Jaquar make item code AKP-35761P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995411 18%

16 170001203 NS-45 Providing and fixing Reduced Body of concealed Stop Cock suitable for 15mm Pipe Line with Plastic Protection Cap (without exposed parts). Jaquar make item code ALD-069FT all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995424 18%

17 170001230 NS-46 Providing and fixing Storage Water Heater 15 litres Jaquar make item code Elena 5 Star Rating all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995461 18%

18 170001123 NS-47 Providing and fixing Soap Dispenser Push Button Jaquar make item code SDR-WHT-DJ0010F all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995415 18%

19 170001514 NS-48 Providing and fixing Hand Dryer Flash touch-free infrared hand dryer with 1150W rated power & carbon brush motor Material : 304 Stainless Steel and Finish: Stainless Steel Finish Jaquar make item code HDR-SSF-AK2807 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995411 18%

20 170001033 NS-49 Providing and fixing Sensotronic concealed type flushing valve for urinal complete set with installation box with control cock Jaquar make item code SNR-STL-51087 or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 995416 18%

21 170001033 NS-50 Providing and fixing Urinal with fixing accessories set size 385x325x635 mm Jaquar make item code URS-WHT-13253N all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 995416 18%

22 170001033 NS-51 Providing and fixing Urinal Partitions Curved/ Rectangular shaped with frosted glass 8mm Chrome finish Jaquar make item code JSE-CHR-810UC450X all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995416 18%

23 170001844 NS-52 Providing and fixing beveled edge mirror with minimum thickness of 8 mm of superior glass (of approved quality) complete fixed on wall with superior quality SS Studs and spacers of suitable dimensions as per approved drawing and as direction of Engineer-in-charge. sqm 5 995468 18%

24 170001034 NS-53 Providing and fixing Counter Top basin Size(mm) 495x395x150 Jaquar make item code SLS-WHT-25909 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 995416 18%

25 170003067 NS-54 Supplying, fixing & Installing 300 mm Tower Bolts of Godrej make all complete. each 6 995411 18%

26 170002122 NS-55 Supplying, fixing & Installing Door Locks of Godrej make item code DC4880PONEH15DLAB all complete. each 6 995478 18%

27 170001583 NS-56 Supplying & Fixing of Square Drain CP Jali 150 x 150 mm each 10 995416 18%

28 170001434 NS-57 Providing & Fixing of 2 LT Opal Glass Wall Lamp Jaquar Make Item Code DBL-CHR-MB48012D all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 995479 18%

29 Providing and fixing Premium Quality Glazed Vitrified Wall Tile Kajaria make or equivalent (thickness to be specified by the manufacturer), of approved shade and textures of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over existing plastered surface , laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS:15477, in average 6 mm thickness including grouting of wall tiles with epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardner and 0.20 kg of resin per kg),including filling/grouting and finshing complete as per directions of Engineer-in-charge.

a 170001423 NS-58 Size of tile 600 mm x 1200 mm sqm 145.84 995479 18%

30 170001423 NS-59 Providing and laying Premium Quality Vitrified floor tiles (Matt) of size 600x600 mm (thickness to be specified by the manufacturer) of approved shade and colour laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. sqm 33.01 995479 18%

31 Providing and laying premuim quality Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

a 170001423 NS-60 Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 1200 mm sqm 263 995479 18%

32 Providing and laying premuim quality Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.

a Glazed Vitrified tiles Matt/Antiskid finish of size

aa 170001423 NS-61 Size of Tile 600 x 1200 mm sqm 26.85 995479 18%

33 Providing and fixing in position Aluminium Frame Work of hollow sections of specified sizes given below for partitions, paneling, boxing, soffits of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips with vertical & horizontal members at not more than 600 mm center to center all complete including necessary additional supports for fixing of patch fittings of door, bracing, runner etc. so that lateral movement is arrested as per instructions of EIC / Architect. The first horizontal member shall be fixed at ground level and thereafter at every 600mm. Frame work will be measured and paid as per actual measurement on site. The item is to be completed in all respects as per detail drawing as specified and as directed by EIC / Architect.

a 170002462 NS-62 SIZE 50 x 25 x 1.60 MM / 50X50X1.7mm or any other suitable section as approved by EIC Kg 75 995416 18%

34 MDF Panelling with High Gloss Deco Paint - Providing & Fixing 12mm thick MDF board over existing frame/walls with screws , plastic gutties ensuring complete levelling of the wall including one coat of epoxy ,polister putty ,deco putty,spray surfacer and high gloss paint with spray. All complete as per architectural drawing and as directed by Engineer-in-charge.

a 170001397 NS-63 12mm Thick MDF Base sqm 50.43 995479 18%

35 170001049 NS-64 Providing and fixing ready made PVC Moulding of 25-50 mm wide and 12-18 mm thickness including P.U Paint in desired shade and finish.All complete as per architectural drawing and as directed by Engineer-in-charge. metre 195 995416 18%

36 170001397 NS-65 WPC Louvers Panelling - Providing and fixing of WPC (Wood Polymer Composite) louver panels over existing wall/partition/frame of approved size,shade and design.All complete as per architectural drawing and as directed by Engineer-in-charge. sqm 30 995479 18%

37 170000688 NS-66 Providing and fixing Storage units like as (Counters, Cabinets, Consoles & Coffee racks) Sides, top, bottom, shelves , vertical dividers are to be made out of 18 mm thick marine ply confirming to IS 710:2010 (Century Ply or equivalent) with written warranty of 20 years. Exposed parts to be laminated with 1 mm thick laminate of Merino,greenlam or equivalent , plain or textured as shall be finalized during execution and unexposed parts to be laminated with 0.8 mm thick balancing lamination. Adhesive as per approved list to be used along with nails/screws as per requirements. Ply on facing wall shall be protected with PVC Sheet as per requirements. All the exposed edges shall be covered and sealed with 2mm thick PVC edge banding tape with hot melt glue . The console box shall be provided with gold painted wooden stand.The scope shall also include all hardware fittings e.g. S.S. finish handles of required size, locks, telescopic channels (make as per approved list) for running the drawers, tower-bolts, magnetic catchers etc all complete as per the approved Architectural drawing and as directed by Engineer-in-charge. sqm 3.6 995476 18%

38 170000688 NS-67 Providing and fixing Drawer units of 450mm deep made in 18mm thick plywood (IS 710) frame work finished with High Gloss laminate of approved shade. This also includes providing necessary hardware like handles, telescopic channels etc of approved make. The internal surfaces of the Drawers units shall be laminated with 1.0mm white laminate . All the exposed internal and external surface of the plywood surface shall be finished in laminate of approved shade with 2mm thick imported rigid PVC edge lipping of approved shade as per the detailed drawing. sqm 3.24 995476 18%

Kitchen Cabinet( UNDER COUNTER )

( 3M X 750MM X 600MM)

39 Providing and fixing in position 600 mm deep,900 mm car cases. Item to be completed in all respects as per drawings and instructions from EIC / Architect as detailed below:

Sides, top, bottom, shelves (not exceeding 450mm c/c), vertical dividers are to be made out of 18mm thk Marine grade plywood (IS 710). External and internal surface are to be finished with 1.0 mm thick laminate AICA (Sunmica) make super white 107 G 324. Shelves and vertical dividers are to be finished with 1 mm thick laminate AICA (Sunmica) make super white 107 G 324 on both the sides except for bottom which will be finished from inside only. Shelves are to be suitably supported on SS buttons.

a Shutters - PU coated Made out of 18 mm thick plyboard as shown in the drawing finished with 1 mm thick laminate AICA (Sunmica) of approved shade on external & AICA (Sunmica) make super white 107 G 324 on internal surface.

aa 170001896 NS-68 8mm thick Marine grade plywood (IS 710) backing finished with 1.0mm thick laminate AICA (Sunmica) make super white 107 G 324 on internal surface. sqm 3.24 995478 18%

40 170001242 NS-69 Providing and laying of wall paper of approved make laid over the existing surfaces after cleaning the existing surfaces, scrapping and rubbing with sand paper, using wall paper adhesive to match the shade of wall paper. The rate shall include cost of material, conveyance, seigniorage charges on material, labour charges on operations complete etc. for finished item of surfaces. Payment shall be made for the exposed area only. The rate to include cost of Wall paper, Wastages and Synthetic resin etc. Item is to be completed in all respects as per the direction of Engineer-In-Charge & strictly in accordance with the approved architectural drawings. sqm 15 995419 18%

41 170002130 NS-70 Providing and fixing of PVC made photo frames with size varying in between 1' to 2' x 1' to 2' inclusive of best quality coloured/black & white printed image as per the image approved /provided in soft format by the Engineer-In-charge , water proof backing sheet and transparent glass covering in front, and fixed on site all complete as per the approved Architectural drawing and & pattern approved by Engineer-in-charge. each 18 995468 18%

42 170000702 NS-71 Providing and fixing ultra LED Rope light in colour warm white of approved make all complete as per architectural drawing and as directed by Engineer-in-charge. metre 25 995461 18%

43 170001866 NS-72 High Gloss PU Polish on all visible sides with sanding one coat of seller reparing. again one coat of seller and two coats of PU spray. All complete as per architectural drawing and as directed by Engineer-in-charge. sqm 29.34 995415 18%

44 170001395 NS-73 Providing and fixing Non-reflective matte, frosted, scratch resistent, high performance resin coated polyster film with required frosting pattern on the glass surface complete as per the directions of EIC/Architect (Payment shall be made for the finished area of the film actually provided. No deduction shall be made for openings upto 0.1 Sq.m. area each and nothing shall be paid extra for making such openings.) sqm 12 995479 18%

45 170002437 NS-74 Making in position of floor cable duct size 1'x1'x4" smooth ,aligned brushed clean and painted with water proof paint silicon based as per drawing and entire to the satisfication of site engg. metre 52.17 998739 18%

46 170002033 NS-75 Providing and fixing Glass wall partition with 12 mm thick toughened glass fixed in Wall Connecting profile of Dorma make with code XL C 4026A or other equivalent brand. The wall connecting profile should be Aluminium Silver Finish Safety Wall Connecting Profile, including all fitting & accessories as required for ensuring secure support of the glass with connecting profile all complete as per drawings & as per the discretion of Engineer-In-Charge. sqm 42 995478 18%

47 170001547 NS-76 Providing and fixing in position suspended, rigid monolithic POP false ceiling made out of following : a) Supply & Installation of GI Channels, Cross, Angle,hangers frame made out of 24 Guage GI Section fixed rigid in position with grid not increasing 750 x 750 mm size , as per ceiling design and drawings. b) Supply & Installation of GI Jali over frame with washers , nuts,screws and bolts. c) Supply & Installation of POP Paste over jali work smooth in level as per design & drawings and to the discretion of EIC. sqm 182.84 995411 18%

48 170001401 NS-77 Extra for supplying and providing U Shaped boxes made out of 12 mm thick ply on all sides & screwed safely on GI Frames. U Shaped ply box is further covered with veneer of approved make on exposed side & PU Polish including cutting grovees for lights all complete as per drawings and discretion of EIC. sqm 35 995479 18%

49 170001154 NS-78 Supplying, fitting & fixing in position 600mmX1800mm rollup curtains coloured 0.33 mm thickness acrylic coated cleanable/ washable, manually rollup blinds (Marvel or its equivalent, as approved) inclusive of all recommended accessories colour pattern etc., as per approvalof EIC. The cost includes all the material, labour, transportation taxes etc., complete for the work. sqm 115.63 995471 18%

50 170004803 NS-79 Providing and fixing of System Aluminuim fixed windows made from extruded aluminuim profile sections of size 45 mm x 50 mm, manufactured from Al alloy grade T6-6063, duly powder coated as per approved shade. The Glazing shall consist of Double Glass unit (DGU) comprising of 8 mm toughened glass (outer) + 16 mm air gap filled with argon gas + 8 mm toughened glass (inner), factor sealed with spacer and primary/secondary sealants to ensure thermal and sound insulation. The sysytem shall be installed complete in all respects including necessary cleats,gaskets,fasteners, sealants and making the installation water tight, airtight and structurally stable all complete as per specifications & discretion of EIC. sqm 57.6 995478 18%

51 170004803 NS-80 Providing and fixing of 12 mm thick toughened glass door with dorma or equivalent make bottom rail (TA/TP easy safe door rail) fitted with dorma floor machine, top patch pivotal including all accssories all complete as per site requirements & discretion of EIC. sqm 3.15 995478 18%

52 170002122 NS-81 Extra for supplying and providing smart drill free glass door biometric lock LG 2024 (Perfiware) ozone or equivalent brand. each 5 995478 18%

53 Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden/steel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately)

a 170003553 NS-82 18 mm thick commercial ply conforming to IS : 1328 BWR type. sqm 14.4 998335 18%

GST Compliant BOM for Electrical Portion for the work of "Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project"

Sl. No. SAP Activity Code Service code DSR/NS Item No. Description of Item Units Quantity HSN GST Rate

A MAIN LT PANEL / DB'S

1 170000720 NS Supply, Erection, Testing and Commissioning of LT Panel as per SLD & TS complete in all respect. Each 1 995461 18%

1 Supply, Erection, Testing and Commisioning of aluminium conductor XLPE insulated armoured power cable of 1.1kV grade as per site requirement upto entire satisfaction of the Engineer-in-charge. :- (Make Polycab / KEI / Havells or equivalent)

B EARTHING (GENERAL / DEDICATED)

1 170002622 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. SET 1 995461 18%

170000997 5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. SET 1 995461 18%

170001717 5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I.pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. metre 20 998739 18%

170001717 5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required metre 20 998739 18%

170002626 5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. metre 20 995461 18%

C INTERNAL LIGHTING & POWER WIRING

1 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

130000029 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Mtr 500 995461 18%

1.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

130000033 1.14.3 2x4 sq.mm + 1X4sqmm earthwire mtr 400 995461 18%

130000034 1.14.4 2x6 sq.mm + 1X6sqmm earthwire mtr 200 995461 18%

130000038 1.14.8 4x4 sq.mm + 2X4 sqmm earthwire mtr 50 995461 18%

130000039 1.14.9 4x6 sq.mm + 2X6 sqmm earthwire mtr 50 995461 18%

1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

130000086 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. mtr 100 995424 18%

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

130000124 1.24.4 3 pin 5/6 A socket outlet each 20 995461 18%

130000126 1.24.6 Telephone socket outlet EACH 10 995461 18%

130000127 1.24.7 TV antenna socket outlet EACH 10 995461 18%

170000719 NS RJ45 SOCKET EACH 10 995461 18%

130000130 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. EACH 10 995461 18%

1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

130000145 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. EACH 20 995461 18%

130000146 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. EACH 10 995461 18%

130000152 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. EACH 2 995461 18%

170004919 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. EACH 5 995461 18%

130000800 1.57 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. EACH 5 995461 18%

1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.

2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

130000236 2.10.4 Triple pole Each 4 998736 18%

130000237 2.10.5 Triple pole & neutral Each 2 998736 18%

2.12 Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.

2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required Each

4.6 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

170000704 4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness mtr 35 995468 18%

170000704 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness mtr 25 995468 18%

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

E FLOOR TRENCH BOXES / CABLE TRAYS

1 Supply and laying Raceways / Conduits (for under floor trenches / On trays) on existing flooring. Raceways / conduits shall be fixed to the flooring with GI clamps for finished levels as per the site conditions or through partitions with all accessories. The rate shall include preparation of trenches of required sizes by carefully removing the malwa on existing floor for laying Raceways/conduits for power, data, telephone cables etc. The depth of the trenches shall be at least 2 inches from the finished floor level or upto RCC of the slab. The rate shall include the cost of the Raceways/conduits. The rate shall also include the activity of clearing the debris generated from the preparation of trenches & filling the same with PCC. (FOR THE PORTION WITHOUT FALSE FLOORING)

1.1 170000821 NS 25 mm heavy guage PVC conduit to be laid concelled / surface in / on wall / floor as the above mentioned Mtr 75 995461 18%

2 Supply & Installation of floor junction boxes without top cover for above raceways, of following sizes, fabricated out of M.S. sheets, fully powder coated with provision for removable M.S. / S.S. screwed cover plates on all four sides for blocking the entry into the junction box. All the junction boxes to be (with stud) 'properly earth - bonded with the raceways pipe using 12 SWG Copper bare wire as directed at site.

2.1 170000708 NS size 250mm x 250mm x 50mm x 2.5mm thick Each 5 995468 18%

2.2 170000708 NS size 300mm x 300mm x 50mm x 2.5mm thick Each 5 995468 18%

3 Supply & Installation of suitable sizes 2mm thick removable cover plate screwed on all four sides of M.S. sheet, fully powder coated, for blocking the entry into the floor junction box for following sizes of junction boxes with rounded corners as per the instruction given & sample approved by the client / architect / consultant at site. Cover plate shall have required no.s of 1' dia knockouts for flexible conduit outlets as per the requirement.

3.1 170000708 NS for Junction Box of size (250mm x 250mm x 50mm x 2.5mm thick) Each 5 995468 18%

3.2 170000708 NS for Junction Box of size (300mm x 300mm x 50mm x 2.5mm thick) Each 5 995468 18%

F LIGHTING FIXTURES

170001719 NS Supply & Installation of (29/30/36W) (2' X 2') LED panel Light. Philips model full glow, G-6 or equivalent make and model EA 17 998739 18%

170001719 NS Supply & Installation of (15/18 W) LED Spotlight flush mounted Light fixture. Philips Cat No. :- DN193 LED 12S or equivalent make and model EA 50 998739 18%

1 170001719 NS Supply & Installation of (10/12 W) LED Spotlight flush mounted Light fixture. Philips Cat No. :- Ultima DN 092 or equivalent make and model EA 40 998739 18%

1.1 170000702 NS Supply & Installation of single color (warm white 2800k light / any other approved color) flexible LED strip light including required rated driver and all necessary hardware & accessories, etc. complete. Philips / CGL / GE / Bajaj/ Wipro make. Rmt 150 995461 18%

2 170001719 NS Supply & Installation of (20/22W) (4') LED Tubelight. Philips Cat No. - BN021 LED 20S or equivalent make and model EA 5 998739 18%

2.1 170001010 NS Supply and installation of ceiling mounted exhaust fan minimum 150mm of reputed make complete in all respect with all accessories . EA 4 995461 18%

2.2 170001010 NS Supply & Installation of 400mm sweep wall fan. Havells model Platina or equivalent make and model EA 2 995461 18%

3 170000320 NS S&I of no 3.5kva (3500) ups dsc based intelli pure sinewave invertor 24volts (2nos 230 Ah batteries ,noiseless operation and safe efficiency performance) EA 1 998336 18%

4 170001719 NS Providing and fixing 12W LED mirror light. Philips model Muziris 31403 or equivalent make and model EA 2 998739 18%

G MUSIC CUM PUBLIC ADDRESS SYSTEM & MISC items

1 170004859 NS Supply, Installation, Testing, Commisioning of point wiring for music - cum PA system comprising of 2x 1.0 sqmm stranded , copper conductor , flexible PVC insulated and PVC Sheathed wire pulled through 20 mm dia. PVC heavy gauge conduits and looped from one speaker to other and to the volume control switch wherever applicable and finally terminated an tagblock. Nos 10 995461 18%

2 170004859 NS Supply, Installation, Testing, Commisioning of of 6" dia music speakers to be flushed mounted on false ceiling similer to BOSCH / approved equivalent make. All speakers to be equipped with matching transformer for direct connection to 100v output line Nos 10 995461 18%

3 170004859 NS Supply, Installation, Testing, Commisioning of volume control - cum - ON - OFF switch flush mounted on wall along with other electrical switches .The size and plate of the regulating knob should match with other switches nearby. Nos 2 995461 18%

4 170001073 NS Arranging for trenching temporary power supply and lighting for all the contractor at site including the required number of tubelight fittings, suffficient number of plug points with plug tops with wiring & cabling, also providing temporary required numbers of power points arrangements for temporary workstations and including all the necessary safety devices like MCB, ELCB / RCCB, etc. to ensure SAFE & CONTINUED supply at site. Also removing of all type of existing electrical installations including light fittings, conduits, switch, socket, casing-capping, DB's MCB's, etc. complete as directed by the client / consultant at site & handing over to the client / Branch Manager at site SET 1 995461 18%

Sub Total ( Electrical Portion incl GST)

Total for Component-5 (CCTV Portion) including GST =

Grand total of all components involved towards Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project =

Note :- Units in case of Electrical items can be each/No./Unit as per availablity in SAP.

GST Compliant BOM of Fire Safety Portion Cost for Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project .

Sl. No. SAP Code Description of Item Units Quantity HSN GST rate

Fire Fighting Portion

1 Supply & Installation of Stored Pressure Fire Extinguisher, ABC 4 KG ISI Marked (IS15683:2018), CE and EN Certified, Fire Rating 3A 55 B, Pure Polyester Powder Coated Body, Forged brass valve with in bult Pressure Relief Device and Non Return Valve for pressure gauge port fitted with Large Dial pressure gauge, Stainless Steel safety pin, High durablility Vinyl label (3M make), QR Code label with printed serial number, EPDM hose & Nozzle with blow-off cap, Individually packed in corrugated paper box together with Wall Bracket, Screws with plugs & wall bracket cover.

a 100050673 ABC 4 Kg IS:15683 Stored Pressure (Fire rating 3A 55B) No 3.00 998736 18%

2 Supply & Installation of Stored Pressure Foam Based Water Mist Low Pressure Type Fire Extinguisher, Capacity 9 Litre, Fire rating 4A, 233B, 75F Deep drawn cylinder body, Internal and external surface of cylinder Epoxy powder coated, Squeeze Grip Valve made of forged brass with nickel chromium plating, In built pressure release device & NRV at pressure gauge mounting port, Polyvinyl Chloride Siphon Tube, Stainless Steel safety pin, EPDM hose with nozzle, High Quality Vinyl label, QR code for product traceability, ISI Marked.

a 100050676 Foam Based Watermist Low Pressure Fire Extinguisher 9L - IS:15683 No 1.00 998736 18%

3 Supply & Installation of D class TEC Powder 9 Kg Gas Cartridge Type Fire Extinguisher, ISI Marked (IS15683:2018), CE Certified, Pure Polyester Powder Coated Body with internal and external coating, Forged brass valve with in bult Pressure Relief Device, Aluminium Siphon tube and Stainless Steel safety pin, EPDM hose with special Aluminum applicator, Specially Designed Cast Aluminium nozzle with radial fins internally, High Quality Vinyl label, QR code for product traceability.

a 100050677 Foam Based Watermist Low Pressure Fire Extinguisher 9L - IS:15683 No 1.00 998736 18%

4 Supply & Installation of Clean Agent 4 Kg Stored Pressure Type Fire Extinguisher, filled with UL & FM approved Clean agent for streaming application, ISI Marked (IS15683:2018), CE Certified, Pure Polyester Powder Coated Body, Forged brass valve with in bult Pressure Relief Device and Non Return Valve for pressure gauge port fitted with Large Dial pressure gauge, Stainless Steel safety pin, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in corrugated paper box together with Wall Bracket, screws & plugs.

a 100050678 Clean Agent 4Kg capacity, IS:15683 (Fire Rating 2A 34B) No 3.00 998736 18%

5 Supply & Installation of Carbon Di-oxide agent Type Fire Extinguisher, 4.5 KG capacity, ISI Marked (IS15683:2018), CE and EN Certified, Containing CO2 gas having purity 99.7% filled in Seamless Cylinder having approval from Petroleum and Explosives Safety Organisation (PESO), coated with High Glossy PU Paint, ISI marked Dual Spindle Valve with Aluminum Wheel & Collar / Squeeze Grip brass valve, Aluminium Siphon tube, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in corrugated paper box together with Wall Bracket, screws & plugs.

a 100050685 CO2 4.5 Kg IS:15683 (Wheel Type Valve) (Fire Rating 55B) No 1.00 998736 18%

Total for Component-5 (CCTV Portion) including GST =

Grand total of all components involved towards Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project =

GST Compliant BOM of CCTV Portion for Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project .

Sl. No. SAP Activity Code SAP Code Description of Item Units Quantity HSN GST Rate

CCTV& Intercom connectivity portion

1 CCTV- Supply, Installation, Testing and Commissioning of the following:

a 100050768 4MP IR Indoor Dome Fixed Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8mm Fixed lens, 0.01 Lux at F1.2, ICR, ONVIF, support H.265, H.264, MJPEG, 120db DWDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 30m, UL, CE, FCC certified. IP20 No 6.00 995461 18%

b 100050769 Supply, Installation of 5 MP IR Wall Mounted Fixed Bullet Network Camera 1/2.7 inch Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, BLC, HLC, Three individually configurable stream, 12 VDC & PoE, IR range: 40m,, IP67 Outdoor Type, Alarm 1 inputs, 1 outputs, Audio 1 inputs, 1 outputs, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Region entrance detection, Region exiting detection, Scene change detection, Face capture, Video tampering, audio exception detection, False alarm reduction through human and vehicle target classification based on deep learning UL, CE, FCC certified. No 4.00 995461 18%

2 100050770 Supply, Installation of NVR 32channel 1080p Channels: 32 Resolution: 1920×1080P HDMI and VGA Resolution Recording: Up to 5 Megapixels No 1.00 995461 18%

3 100050771 Supply, Installation of POE Switch 16 port Number of ports : 16 ports, Ethernet Speed Gigabit, Switch Fabric : 32Gbps Forwarding Capacity, Power Supply : 100-240VAC, 50/60 Hz Internal Universal Power, RJ-45 : No 2.00 995461 18%

4 100050772 Supply, Installation of 8 TB Surveillance Hard disk No 7.00 995461 18%

5 100050773 Supply, Installation of 55" 4K SMart LED Display No 1.00 995461 18%

6 100050774 Supply, Installation of 9U Rack With Accessories (WALLRACK) No 1.00 995461 18%

7 100050775 Supply, Installation of 6U Rack With Accessories (WALLRACK) No 1.00 995461 18%

GST Compliant BOM of AC Portion for Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project .

Sl. No. SAP Code Description of Item Units Quantity HSN Code GST Rate

Air Conditioning Portion

1 100057878 Supply, installation,testing and commissioning of cassette type unit with 3.0 ton capacity (Cooling only) Daikin make model no. FCVFQ100 (3-Star Inverter) or equivalent model of other reputed brand like LG ,Blu-Star or equivalent including all indoor, outdoor units & other accessories all complete. Each 1.00 995466 18%

2 100057879 Supply, installation,testing and commissioning of 5.5 Ton High Static Ductable Non Inverter Air Conditioner Daikin make model no. FDR65 (Non-Inverter) or equivalent model of other reputed brand like LG ,Blu-Star or equivalent including all indoor, outdoor units & other accessories all complete. Each 2.00 995466 18%

3 100057880 Supply, installation,testing and commissioning of 2.02 ton split type unit (cooling only) Air Conditioner Daikin make model no. FTKL71 (3-Star Inverter) or equivalent model of other reputed brand like LG ,Blu-Star or equivalent including all indoor, outdoor units & other accessories all complete. Each 1.00 995466 18%

4 100057881 Supply, installation,testing and commissioning of 1.5 ton split type unit (cooling only) Air Conditioner Daikin make model no. FTKL50 (3-Star Inverter) or equivalent model of other reputed brand like LG ,Blu-Star or equivalent including all indoor, outdoor units & other accessories all complete. Each 7.00 995466 18%

5 100057882 Supply, installation,testing and commissioning of SINGLE Phase Timer for Auto Switching of AC Units Each 3.00 995466 18%

6 100057883 Supplying & fixing Copper piping between indoor and condensing units with 18G HARD DRAWN copper including all fittings on MS Painted slooted angle framework for Ducted Units. M 30.00 995466 18%

7 100057884 Supplying & fixing Copper piping between indoor and condensing units with Soft DRAWN copper including all fittings on MS Painted slooted angle framework for Split & Cassette Units. M 40.00 995466 18%

8 100057885 Supply & providing Control copper cabling of size 4 core 2.5mm sq in PVC conduit between indoor & out door units. M 35.00 995466 18%

9 100057886 Supplying & fixing PVC Pipe drain piping in the plant room for drainage of condensate from the indoor machine with Insulation. M 20.00 995466 18%

10 100057887 Supplying & fixing Double canvas connection with frames. Each 2.00 995466 18%

11 100057888 Supplying & fixing Galvanised steel sheet ducting for carrying conditioned air. Sqm 65.00 995466 18%

12 100057889 Suplying & fixing Thermal Insulation with Nitrile Rubber Sheet of 10mm thickness fixed with adhesive Sqm 65.00 995466 18%

13 100057890 Supplying & fixing Aluminium Extruded Supply/ Return Coniteous Grills Sqm 3.00 995466 18%

Cost Estimate for Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project

Sl. No. SAP Activity Code Item No. Description of Item Units Unit Rate (₹) Quantity Total Amount (₹) Remarks

1 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

a 120000439 4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) cum 7294.70 7310.68 7310.68 4.130 30127.11 30193.09 30193.11

2 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

3 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

4 120000620 6.15 Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. sqm 104.80 105.03 105.03 48.540 5086.99 5098.13 5098.16

5 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

a 120000739 8.2.2.2 Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm sqm 5136.30 5147.55 5147.55 29.570 151880.39 152213.01 152213.05

6 120000743 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each 978.70 980.84 980.84 5.000 4893.50 4904.22 4904.20

7 8.28 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : 0.00

a 120000847 8.28.1 Decorative veneer facings of approved manufacture sqm 1946.25 1950.51 1950.51 29.340 57102.98 57228.03 57227.96

8 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 0.00

10 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 0.00

a 120000812 9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 2172.10 2176.86 2176.86 10.710 23263.19 23314.14 23314.17

11 9.22 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) 0.00 0.00

12 120000815 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). sqm 462.35 463.36 463.36 10.710 4951.77 4962.61 4962.59

13 120000957 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. each 983.15 985.30 985.30 6.000 5898.90 5911.82 5911.80

14 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 0.00 0.00

15 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 0.00 0.00

16 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 0.00 0.00

9 9.140 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). 0.00 0.00

a 120001069 9.140.1 12 mm thick commercial ply conforming to IS : 1328 BWR type sqm 1224.65 1227.33 1227.33 14.940 18296.27 18336.34 18336.31

17 9.147A Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds 0.00 0.00

a 9.147C2.1 Fixed window / ventilator with mullion / transom. Using R1 series with frame (33 mm & above ) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre) sqm 9155.20 9175.25 9175.25 1.620 14831.42 14863.90 14863.91

b 9.147D1.2 Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles. Using R2 series with frame (39 mm & above) x (39 mm & above) & sash /mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre) sqm 12254.90 12281.74 12281.74 1.320 16176.47 16211.89 16211.90

c 9.147.F1.1 Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre). sqm 12496.05 12523.42 12523.42 11.760 146953.55 147275.38 147275.42

d 9.147.F2.1 Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above).(Height upto 2.5 metre). sqm 11903.75 11929.82 11929.82 3.150 37496.81 37578.93 37578.93

18 120001387 12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. sqm 2158.15 2162.88 2162.88 85.000 183442.75 183844.49 183844.80

19 13.1 Cement Plaster (in fine sand) 12 mm cement plaster of mix : 0.00 0.00

20 13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 0.00 0.00

21 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 0.00 0.00

a 120001522 13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 73.95 74.11 74.11 144.000 10648.80 10672.12 10671.84

22 120003397 13.114 Melamine polishing on wood work (one or more coat). sqm 138.10 138.40 138.40 21.420 2958.10 2964.58 2964.53

23 100006049 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. each 134.10 134.39 134.39 4.000 536.40 537.57 537.56

24 120003297 14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall metre 3.25 3.26 3.26 45.000 146.25 146.57 146.70

25 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 0.00 0.00

a 120001641 15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) cum 2434.25 2439.58 2439.58 4.130 10053.45 10075.47 10075.47

26 120001643 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. cum 3551.25 3559.03 3559.03 15.480 54973.35 55093.74 55093.78

27 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 0.00 0.00

28 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 0.00 0.00

29 15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 0.00 0.00

30 120001720 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. each 112.05 112.30 112.30 4.000 448.20 449.18 449.20

31 120001727 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 54.65 54.77 54.77 141.340 7724.23 7741.15 7741.19

32 120001728 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge. sqm 56.35 56.47 56.47 235.500 13270.43 13299.49 13298.69

33 120001731 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum 263.95 264.53 264.53 95.000 25075.25 25130.16 25130.35

34 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 0.00 0.00

35 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 0.00 0.00

36 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0.00 0.00

a 120002800 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) sqm 1685.40 1689.09 1689.09 13.980 23561.89 23613.49 23613.48

37 MDSR 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0.00 0.00

a 170001395 MDSR 21.3.3 With Frosted glass panes of 8 mm thickness (weight not less than 20 kg/sqm) sqm 2067.20 2071.73 2071.73 8.400 17364.48 17402.51 17402.53

Total for DSR Items (Including GST) 1201788.21 1204420.12 1204419.20 1204420.12

Modified Estimated Cost after using Correction factor on DSR 2023 on account of GST @ 0.973 as per CPWD Office Memorandum Dated :-08-08-2024 1169339.93

Amount after adding add Cost Index over DSR2023 rates @ 3% as per CPWD Office Memorandum Dated :-18-03-2025 1204420.12

Total Amount DSR Items (Including GST) 1204420.12

B Non-schedule items

1 Providing and fixing UPVC SWR Pipe for Soil and waste discharge system conforming to IS : 13592 Type B, including jointing with seal ring and solvent, (i) Single socketed pipes.

2 Providing and fixing UPVC SWR Pipe fittings for Soil and waste discharge system conforming to IS : 14735, including jointing with seal ring and solvent.

a 170001507 NS-5 Coupler (75 mm dia) each 354.00 5.000 1770.00 Rates PO 5100054260

b 170001507 NS-6 Coupler (110 mm dia) each 354.00 10.000 3540.00 Rates PO 5100054260

c 170001507 NS-7 Coupler (160 x 160 mm dia) each 279.49 5.000 1397.45 Rates PO 5100054260

d 170001507 NS-8 Coupler (160 x 110 mm dia) each 241.33 5.000 1206.65 Rates PO 5100054260

e 170001507 NS-9 Coupler (160 x 75 mm dia) each 185.30 4.000 741.20 Rates PO 5100054260

f 170001507 NS-10 Coupler (110 x 75 mmdia) each 143.95 5.000 719.75 Rates PO 5100054260

g 170001507 NS-11 Coupler (50 x 50 mm dia) each 88.09 3.000 264.27 Rates PO 5100054260

h 170002368 NS-12 Plain Bend (75 mm dia) each 472.00 5.000 2360.00 Rates PO 5100054260

i 170002368 NS-13 Plain Bend (110 mm dia) each 472.00 10.000 4720.00 Rates PO 5100054260

j 170002368 NS-14 Plain Bend (160 x 160 mm dia) each 358.55 4.000 1434.20 Rates PO 5100054260

k 170002368 NS-15 Plain Bend (50 mm dia) each 88.81 3.000 266.43 Rates PO 5100054260

l 170002368 NS-16 Door Bend (75 mm dia) each 413.00 7.000 2891.00 Rates PO 5100054260

m 170002368 NS-17 Door Bend (110 mm dia) each 413.00 7.000 2891.00 Rates PO 5100054260

n 170003942 NS-18 Door Tee (75x75x75 mm dia) each 354.00 5.000 1770.00 Rates PO 5100054260

o 170003942 NS-19 Door Tee (110x110x100 mm dia) each 295.00 7.000 2065.00 Rates PO 5100054260

p 170003942 NS-20 Door Tee (110x110x75 mm dia) each 295.00 7.000 2065.00 Rates PO 5100054260

r 170003942 NS-22 Plain tee (110 x 110 mm dia) each 239.45 3.000 718.35 Rates PO 5100054260

s 170003942 NS-23 Plain tee (75 x 75 mm dia) each 146.63 3.000 439.89 Rates PO 5100054260

t 170003942 NS-24 Plain tee (50 mm dia) each 95.75 3.000 287.25 Rates PO 5100054260

u 170001817 NS-25 Floor Trap (110 x 75 mm dia) each 354.00 10.000 3540.00 Rates PO 5100054260

v 170001817 NS-26 Floor Trap (110 x 110 mm dia) each 354.00 10.000 3540.00 Rates PO 5100054260

w 170003947 NS-27 Vent Cowl (75 mm dia) each 236.00 3.000 708.00 Rates PO 5100054260

x 170003947 NS-28 Vent Cowl (110 mm dia) each 236.00 3.000 708.00 Rates PO 5100054260

z 170002368 NS-30 Half Bend 75 x 75 mm each 109.62 3.000 328.86 Rates PO 5100054260

aa 170002368 NS-31 Reducing Tee 160 x 110 mm each 416.37 5.000 2081.85 Rates PO 5100054260

3 170001538 NS-32 Providing and fixing Health Faucet with 1.2 m flexible tube and wall hook Jaquar make Item code ALD-573 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1888.00 4.000 7552.00 Rates PO 5100054260

4 170001513 NS-33 Providing and fixing click clack Waste Coupling 32 mm size full thread Jaquar make item code ALD-727 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1180.00 6.000 7080.00 Rates PO 5100054260

5 170000793 NS-34 Providing and fixing Bottle Trap (with internal partition) 32mm size 250 mm & 190 mm long wall connection pipes & wall flange Jaquar make item code ALD-769L250x190 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 2124.00 6.000 12744.00 Rates PO 5100054260

6 170002840 NS-35 Providing and fixing Single Piece-WC with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, fixing accessories and accessories set, cistern fittings, S Trap-300 mm size (390x710x730) mm Jaquar make item code VGS-WHT-81853S300UF all complete. or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 27376.00 4.000 109504.00 Rates PO 5100054260

7 170001519 NS-36 Providing and fixing Angular stop cock with wall flange Jaquar make item code OPP-15053PM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1121.00 24.000 26904.00 Rates PO 5100054260

8 170001821 NS-37 Providing and fixing 2 Way Bib Cock with wall flange Jaquar make item code OPP-15041PM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 2360.00 4.000 9440.00 Rates PO 5100054260

9 170002127 NS-38 Providing and fixing exposed part kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal (compatible with ALD-083, ALD-089 & ALD-081) Jaquar make item code OPP-15083KPM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1888.00 4.000 7552.00 Rates PO 5100054260

10 170001808 NS-39 Providing and fixing Single Lever Tall Boy with 150mm Extension Body Fixed Spout without Popup Waste System with 600 mm long braided hoses Jaquar make item code OPP-15005BPM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6490.00 6.000 38940.00 Rates PO 5100054260

11 170001206 NS-40 Providing and fixing Single Towel Rail 600mm Long, Stainless Steel Jaquar make item code AKP-35711PS all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 2832.00 4.000 11328.00 Rates PO 5100054260

12 170001458 NS-41 Providing and fixing Towel Ring Square Jaquar make item code AKP-35721P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 2360.00 4.000 9440.00 Rates PO 5100054260

13 170002126 NS-42 Providing and fixing Soap Dish Holder Jaquar make item code AKP-35731P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1239.00 4.000 4956.00 Rates PO 5100054260

14 170001536 NS-43 Providing and fixing Toilet Roll Holder Jaquar make item code AKP-35751P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1416.00 4.000 5664.00 Rates PO 5100054260

15 170002165 NS-44 Providing and fixing Double Coat Hook Jaquar make item code AKP-35761P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1062.00 4.000 4248.00 Rates PO 5100054260

16 170002127 NS-45 Providing and fixing Reduced Body of concealed Stop Cock suitable for 15mm Pipe Line with Plastic Protection Cap (without exposed parts). Jaquar make item code ALD-069FT all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1298.00 4.000 5192.00 Rates PO 5100054260

17 170001230 NS-46 Providing and fixing Storage Water Heater 15 litres Jaquar make item code Elena 5 Star Rating all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 11800.00 4.000 47200.00 Rates PO 5100054260

18 170001123 NS-47 Providing and fixing Soap Dispenser Push Button Jaquar make item code SDR-WHT-DJ0010F all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 1416.00 4.000 5664.00 Rates PO 5100054260

19 170001514 NS-48 Providing and fixing Hand Dryer Flash touch-free infrared hand dryer with 1150W rated power & carbon brush motor Material : 304 Stainless Steel and Finish: Stainless Steel Finish Jaquar make item code HDR-SSF-AK2807 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 10856.00 4.000 43424.00 Rates PO 5100054260

20 170001038 NS-49 Providing and fixing Sensotronic concealed type flushing valve for urinal complete set with installation box with control cock Jaquar make item code SNR-STL-51087 or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 10620.00 6.000 63720.00 Rates PO 5100054260

21 170002105 NS-50 Providing and fixing Urinal with fixing accessories set size 385x325x635 mm Jaquar make item code URS-WHT-13253N all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 8614.00 6.000 51684.00 Rates PO 5100054260

22 170001128 NS-51 Providing and fixing Urinal Partitions Curved/ Rectangular shaped with frosted glass 8mm Chrome finish Jaquar make item code JSE-CHR-810UC450X all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6254.00 4.000 25016.00 Rates PO 5100054260

23 170001844 NS-52 Providing and fixing beveled edge mirror with minimum thickness of 8 mm of superior glass (of approved quality) complete fixed on wall with superior quality SS Studs and spacers of suitable dimensions as per approved drawing and as direction of Engineer-in-charge. sqm 2360.00 5.000 11800.00 Rates PO 5100054260

24 NS-53 Providing and fixing Counter Top basin Size(mm) 495x395x150 Jaquar make item code SLS-WHT-25909 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4241.27 6.000 25447.62 Rates PO 5100054260

25 NS-54 Supplying, fixing & Installing 300 mm Tower Bolts of Godrej make all complete. sqm 532.98 6.000 3197.88 Rates PO 5100054260

26 NS-55 Supplying, fixing & Installing Door Locks of Godrej make item code DC4880PONEH15DLAB all complete. each 2380.08 6.000 14280.48 Rates PO 5100054260

27 NS-56 Supplying & Fixing of Square Drain CP Jali 150 x 150 mm each 727.77 10.000 7277.70 Rates PO 5100054260

28 NS-57 Providing & Fixing of 2 LT Opal Glass Wall Lamp Jaquar Make Item Code DBL-CHR-MB48012D all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 15132.08 4.000 60528.32 Rates PO 5100054260

29 Providing and fixing Premium Quality Glazed Vitrified Wall Tile Kajaria make or equivalent (thickness to be specified by the manufacturer), of approved shade and textures of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over existing plastered surface , laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS:15477, in average 6 mm thickness including grouting of wall tiles with epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardner and 0.20 kg of resin per kg),including filling/grouting and finshing complete as per directions of Engineer-in-charge.

a NS-58 Size of tile 600 mm x 1200 mm sqm 3118.65 145.840 454823.92 Rates PO 5100054260

30 NS-59 Providing and laying Premium Quality Vitrified floor tiles (Matt) of size 600x600 mm (thickness to be specified by the manufacturer) of approved shade and colour laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. sqm 1652.00 33.010 54532.52 Rates PO 5100054260

31 Providing and laying premuim quality Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

a NS-60 Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 1200 mm sqm 2300.00 263.000 604900.00 Quotation Rate

32 Providing and laying premuim quality Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.

a Glazed Vitrified tiles Matt/Antiskid finish of size

aa NS-61 Size of Tile 600 x 1200 mm sqm 2350.00 26.850 63097.50 Quotation Rate

33 Providing and fixing in position Aluminium Frame Work of hollow sections of specified sizes given below for partitions, paneling, boxing, soffits of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips with vertical & horizontal members at not more than 600 mm center to center all complete including necessary additional supports for fixing of patch fittings of door, bracing, runner etc. so that lateral movement is arrested as per instructions of EIC / Architect. The first horizontal member shall be fixed at ground level and thereafter at every 600mm. Frame work will be measured and paid as per actual measurement on site. The item is to be completed in all respects as per detail drawing as specified and as directed by EIC / Architect.

a NS-62 SIZE 50 x 25 x 1.60 MM / 50X50X1.7mm or any other suitable section as approved by EIC Kg 672.60 75.000 50445.00 Quotation Rate

34 MDF Panelling with High Gloss Deco Paint - Providing & Fixing 12mm thick MDF board over existing frame/walls with screws , plastic gutties ensuring complete levelling of the wall including one coat of epoxy ,polister putty ,deco putty,spray surfacer and high gloss paint with spray. All complete as per architectural drawing and as directed by Engineer-in-charge.

a NS-63 12mm Thick MDF Base sqm 13039.00 50.430 657556.77 Quotation Rate

35 NS-64 Providing and fixing ready made PVC Moulding of 25-50 mm wide and 12-18 mm thickness including P.U Paint in desired shade and finish.All complete as per architectural drawing and as directed by Engineer-in-charge. metre 1123.36 195.000 219055.20 Quotation Rate

36 NS-65 WPC Louvers Panelling - Providing and fixing of WPC (Wood Polymer Composite) louver panels over existing wall/partition/frame of approved size,shade and design.All complete as per architectural drawing and as directed by Engineer-in-charge. sqm 8779.20 30.000 263376.00 Quotation Rate

37 NS-66 Providing and fixing Storage units like as (Counters, Cabinets, Consoles & Coffee racks) Sides, top, bottom, shelves , vertical dividers are to be made out of 18 mm thick marine ply confirming to IS 710:2010 (Century Ply or equivalent) with written warranty of 20 years. Exposed parts to be laminated with 1 mm thick laminate of Merino,greenlam or equivalent , plain or textured as shall be finalized during execution and unexposed parts to be laminated with 0.8 mm thick balancing lamination. Adhesive as per approved list to be used along with nails/screws as per requirements. Ply on facing wall shall be protected with PVC Sheet as per requirements. All the exposed edges shall be covered and sealed with 2mm thick PVC edge banding tape with hot melt glue . The console box shall be provided with gold painted wooden stand.The scope shall also include all hardware fittings e.g. S.S. finish handles of required size, locks, telescopic channels (make as per approved list) for running the drawers, tower-bolts, magnetic catchers etc all complete as per the approved Architectural drawing and as directed by Engineer-in-charge. sqm 8500.00 3.600 30600.00 Quotation Rate

38 NS-67 Providing and fixing Drawer units of 450mm deep made in 18mm thick plywood (IS 710) frame work finished with High Gloss laminate of approved shade. This also includes providing necessary hardware like handles, telescopic channels etc of approved make. The internal surfaces of the Drawers units shall be laminated with 1.0mm white laminate . All the exposed internal and external surface of the plywood surface shall be finished in laminate of approved shade with 2mm thick imported rigid PVC edge lipping of approved shade as per the detailed drawing. sqm 15072.05 3.240 48833.44 Quotation Rate

Kitchen Cabinet( UNDER COUNTER )

( 3M X 750MM X 600MM)

39 Providing and fixing in position 600 mm deep,900 mm car cases. Item to be completed in all respects as per drawings and instructions from EIC / Architect as detailed below:

Sides, top, bottom, shelves (not exceeding 450mm c/c), vertical dividers are to be made out of 18mm thk Marine grade plywood (IS 710). External and internal surface are to be finished with 1.0 mm thick laminate AICA (Sunmica) make super white 107 G 324. Shelves and vertical dividers are to be finished with 1 mm thick laminate AICA (Sunmica) make super white 107 G 324 on both the sides except for bottom which will be finished from inside only. Shelves are to be suitably supported on SS buttons.

a Shutters - PU coated Made out of 18 mm thick plyboard as shown in the drawing finished with 1 mm thick laminate AICA (Sunmica) of approved shade on external & AICA (Sunmica) make super white 107 G 324 on internal surface.

aa NS-68 8mm thick Marine grade plywood (IS 710) backing finished with 1.0mm thick laminate AICA (Sunmica) make super white 107 G 324 on internal surface. sqm 8500.00 3.240 27540.00 Quotation Rate

40 NS-69 Providing and laying of wall paper of approved make laid over the existing surfaces after cleaning the existing surfaces, scrapping and rubbing with sand paper, using wall paper adhesive to match the shade of wall paper. The rate shall include cost of material, conveyance, seigniorage charges on material, labour charges on operations complete etc. for finished item of surfaces. Payment shall be made for the exposed area only. The rate to include cost of Wall paper, Wastages and Synthetic resin etc. Item is to be completed in all respects as per the direction of Engineer-In-Charge & strictly in accordance with the approved architectural drawings. sqm 3186.00 15.000 47790.00 Quotation Rate

41 NS-70 Providing and fixing of PVC made photo frames with size varying in between 1' to 2' x 1' to 2' inclusive of best quality coloured/black & white printed image as per the image approved /provided in soft format by the Engineer-In-charge , water proof backing sheet and transparent glass covering in front, and fixed on site all complete as per the approved Architectural drawing and & pattern approved by Engineer-in-charge. each 920.40 18.000 16567.20 Quotation Rate

42 NS-71 Providing and fixing ultra LED Rope light in colour warm white of approved make all complete as per architectural drawing and as directed by Engineer-in-charge. metre 1433.70 25.000 35842.50 Quotation Rate

43 NS-72 High Gloss PU Polish on all visible sides with sanding one coat of seller reparing. again one coat of seller and two coats of PU spray. All complete as per architectural drawing and as directed by Engineer-in-charge. sqm 6897.10 29.340 202360.91 Quotation Rate

44 NS-73 Providing and fixing Non-reflective matte, frosted, scratch resistent, high performance resin coated polyster film with required frosting pattern on the glass surface complete as per the directions of EIC/Architect (Payment shall be made for the finished area of the film actually provided. No deduction shall be made for openings upto 0.1 Sq.m. area each and nothing shall be paid extra for making such openings.) sqm 2000.00 12.000 24000.00 Quotation Rate

45 NS-74 Making in position of floor cable duct size 1'x1'x4" smooth ,aligned brushed clean and painted with water proof paint silicon based as per drawing and entire to the satisfication of site engg. metre 900.00 52.170 46953.00 Quotation Rate

46 NS-75 Providing and fixing Glass wall partition with 12 mm thick toughened glass fixed in Wall Connecting profile of Dorma make with code XL C 4026A or other equivalent brand. The wall connecting profile should be Aluminium Silver Finish Safety Wall Connecting Profile, including all fitting & accessories as required for ensuring secure support of the glass with connecting profile all complete as per drawings & as per the discretion of Engineer-In-Charge. sqm 11700.00 42.000 491400.00 Quotation Rate

47 NS-76 Providing and fixing in position suspended, rigid monolithic POP false ceiling made out of following : a) Supply & Installation of GI Channels, Cross, Angle,hangers frame made out of 24 Guage GI Section fixed rigid in position with grid not increasing 750 x 750 mm size , as per ceiling design and drawings. b) Supply & Installation of GI Jali over frame with washers , nuts,screws and bolts. c) Supply & Installation of POP Paste over jali work smooth in level as per design & drawings and to the discretion of EIC. sqm 2000.00 182.840 365680.00 Quotation Rate

48 NS-77 Extra for supplying and providing U Shaped boxes made out of 12 mm thick ply on all sides & screwed safely on GI Frames. U Shaped ply box is further covered with veneer of approved make on exposed side & PU Polish including cutting grovees for lights all complete as per drawings and discretion of EIC. sqm 4200.00 35.000 147000.00 Quotation Rate

49 NS-78 Supplying, fitting & fixing in position 600mmX1800mm rollup curtains coloured 0.33 mm thickness acrylic coated cleanable/ washable, manually rollup blinds (Marvel or its equivalent, as approved) inclusive of all recommended accessories colour pattern etc., as per approvalof EIC. The cost includes all the material, labour, transportation taxes etc., complete for the work. sqm 1500.00 115.630 173445.00 Quotation Rate

50 NS-79 Providing and fixing of System Aluminuim fixed windows made from extruded aluminuim profile sections of size 45 mm x 50 mm, manufactured from Al alloy grade T6-6063, duly powder coated as per approved shade. The Glazing shall consist of Double Glass unit (DGU) comprising of 8 mm toughened glass (outer) + 16 mm air gap filled with argon gas + 8 mm toughened glass (inner), factor sealed with spacer and primary/secondary sealants to ensure thermal and sound insulation. The sysytem shall be installed complete in all respects including necessary cleats,gaskets,fasteners, sealants and making the installation water tight, airtight and structurally stable all complete as per specifications & discretion of EIC. sqm 13009.05 57.600 749321.28 Quotation Rate =1208.57*10.764= 13009.05 1sqm=sqft*10.764

51 NS-80 Providing and fixing of 12 mm thick toughened glass door with dorma or equivalent make bottom rail (TA/TP easy safe door rail) fitted with dorma floor machine, top patch pivotal including all accssories all complete as per site requirements & discretion of EIC. sqm 8500.00 3.150 26775.00 Quotation Rate

52 NS-81 Extra for supplying and providing smart drill free glass door biometric lock LG 2024 (Perfiware) ozone or equivalent brand. each 6500.00 5.000 32500.00 Quotation Rate

53 Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden/steel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately)

a NS-82 18 mm thick commercial ply conforming to IS : 1328 BWR type. sqm 2000.00 14.400 28800.00 Quotation Rate

Total for Non-schedule items (Including GST) 5579817.84

Grand Total Amount for DSR Items & Non-schedule items (Including GST) 6784237.96

MDSR 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .

MDSR 21.3.1 With Frosted glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Code Description Unit Quantity Rate Amount

Details of cost for 1.00 sqm MATERIAL Float Glass panes 4.0 mm thick = 1.00 sqm Add for wastage & breakage @ 10% = 0.10 sqm Total =1.10 sqm

8778 With Frosted glass panes of 8 mm thickness (weight not less than 20 kg/sqm) sqm 1.10 890.00 979.00

9977 Carriage of glass L.S 2.42 2.27 5.49

7390 Neoprene/EPDM rubber gasket metre 6.00 16.00 96.00

0112 Carpenter 2nd class day 0.23 816.00 187.68

9988 Sundries & carriage of gasket L.S 6.89 2.27 15.64

Add 1 % Water charges on "W" 14.53

Add GST on "X" (multiplying factor 0.2127) 312.16

Add 15% CPOH on "Y" 266.97

Add Cess @ 1% on "Z" 20.47

Cost of 1 sqm 2067.22

4mm Price = 445 per sqm

so 8mm Price = 890 per sqm

Measurements Sheet-Urgent Facelifting/Civil Renovation of IDBI Vacated Ground floor portion of RHQ Building for RTAMC Upgradation Project .

Civil works Portion

Sl. NO. DSR 2023 Item No. Item Description Unit No Length Width Height Quantity

A Part-A DSR Items

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Incharge room attach washroom cum 1 1.59 1.44 0.125 0.284

Maintenance room attach washroom cum 1 1.59 1.44 0.125 0.284

Common Washrooms cum 2 4.45 3.12 0.125 3.471

6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand)

Control Room Wall cum 1 5.37 0.23 3.000 3.705

Toilet Wall cum 1 3.50 0.23 3.000 2.415

6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)

Partition walls of Battery , Server, UPS & Maintainnce Rooms sqm 3 3.50 3.000 31.500

Partition wall Pantry sqm 1 3.88 3.000 11.640

Kitchen/Toilet supports for Vanity etc sqm 12 0.60 0.750 5.400

6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. sqm 48.540

8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby red

8.2.2.2 Area of slab over 0.50 sqm

Toilet Common sqm 2 1.90 0.60 2.280

Toilet Attach Washrooms sqm 2 1.01 0.60 1.212

Pantry sqm 1 3.50 0.60 2.100

Windows sqm 6 13.32 0.30 23.976

8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Toilets & Pantry each 5 5.000

8.28 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with:

8.28.1 Decorative veneer facings of approved manufacture

Incharge Room Sqm 1 4.98 3.00 14.940

Control Room partition Sqm 3 12.00 0.40 14.400

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Attach Toilets cum 2 4.950 0.125 0.075 0.093

Common Toilet cum 3 5.100 0.125 0.075 0.143

9.140 Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately)

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type.

12mm Thick PlyBase over Frame

Grid Bhawan Building

Incharge Room Sqm 1 4.98 3.00 14.940

9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Attach Toilets sqm 2 0.750 2.100 3.150

Common Toilet sqm 3 0.900 2.100 5.670

9.22 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)

9.22.1 On one side only

Attach Toilets sqm 4 0.750 2.100 6.300

Common Toilet sqm 6 0.900 2.100 11.340

9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Attach Toilets sqm 2 0.750 2.100 3.150

Common Toilet sqm 3 0.900 2.100 5.670

9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Relevent Doors each 6 6.000

9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

9.97.1 300x10 mm (Wherever required) each 6.000

9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

9.100.1 125 mm (Wherever required) each 6.000

9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper (Wherever required) each 8.000

9.147A Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds

9.147.C2 Fixed window / ventilator with mullion / transom.

9.147.C2.1 Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 metre)

Common Washrooms sqm 3 0.900 0.600 1.620

9.147.D1 Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles.

9.147.D1.2 Using R2 series with frame (39 mm & above) x (39 mm & above) & sash /mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre)

Attach Washrooms sqm 2 0.550 1.200 1.320

9.147.F1 Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.

9.147.F1.1 Using R3 series with frame (55 mm & above) x (50mm & above) & sash (55 mm & above) x (85mm & above) (Height upto 2.5 metre).

Battery,Server,UPS & Maintaince sqm 4 0.800 2.100 6.720

Toilet in Common sqm 2 0.800 2.100 3.360

Pantry sqm 1 0.800 2.100 1.680

9.147.F2 Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.

9.147.F2.1 Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above). (Height upto 2.5 metre).

Main RTAMC Door (If required) sqm 1 1.500 2.100 3.150

12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. sqm

Server,Battery,Maintaince & Toilets sqm 1 85.00 1.000 85.000

13.1 12 mm cement plaster of mix :

13.1.2 1:6 (1 cement: 6 fine sand)

Control Room Wall sqm 2 5.37 3.000 32.220

Toilet Wall sqm 2 3.50 3.000 21.000

Partition walls of Battery , Server, UPS & Maintainnce Rooms sqm 6 3.50 3.000 63.000

Partition wall Pantry sqm 2 3.88 3.000 23.280

Kitchen/Toilet supports for Vanity etc sqm 10 0.60 0.750 4.500

Attach Toilets sqm 2 20.00 1.000 40.000

Common Washroom sqm 2 15.14 3.000 90.840

Total = 274.840

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

13.83.2 Two Coats

Control Room Wall sqm 2 5.37 3.000 32.220

Toilet Wall sqm 2 3.50 3.000 21.000

Partition walls of Battery , Server, UPS & Maintainnce Rooms sqm 6 3.50 3.000 63.000

Partition wall Pantry sqm 2 3.88 3.000 23.280

Kitchen/Toilet supports for Vanity etc sqm 10 0.60 0.750 4.500

Total = 144.000

13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Total = 144.000

13.114 Melamine polishing on wood work (one or more coat). sqm 21.420

14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. Each 4.000

14.84 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.

(a) Internal Work- Exposed on wall metre 45.000

15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) cum

Incharge room attach washroom cum 1 1.59 1.44 0.125 0.284

Maintenance room attach washroom cum 1 1.59 1.44 0.125 0.284

Common Washroom cum 2 4.45 3.12 0.13 3.471

15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Existing counter Common Washroom cum 2 1.80 0.60 0.100 0.216

Attach washrooms cum 2 1.20 0.60 0.100 0.144

Locker Room (if required) cum 1 11.20 0.45 3.000 15.120

15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below each 12.000

15.12.2 Of area beyond 3 sq. metres each 12.000

15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 277.000

15.42 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

15.42.1 75 to 80 mm dia pipe metre 15.000

15.42.2 100 mm dia pipe metre 20.000

15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Each 4.000

15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Toilet Wall sqm 1 3.50 3.000 10.500

Attach Toilets sqm 2 20.00 1.000 40.000

Common Washroom sqm 2 15.14 3.000 90.840

Total = 141.340

15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer in- charge.

Cabins /Partitons (if required) sqm 1 78.50 3.000 235.500

Total = 235.500

15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Overall Cum 1 95.00 1.000 95.000

18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.3 25 mm nominal outer dia Pipes metre 9 9.000

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc

18.8.2 20 mm nominal outer dia Pipes metre 45 45.000

18.8.3 25 mm nominal outer dia Pipes metre 10 10.000

21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Main RTAMC Door & Control Room door sqm 2 1.500 2.100 6.300

Incharge Room Window sqm 1 4.000 1.500 6.000

Maintenance Room sqm 1 0.800 2.100 1.680

M21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.3 With frosted glass panes of 8 mm thickness

Battery,Server,UPS sqm 3 0.800 2.100 5.040

Toilet in Common sqm 2 0.800 2.100 3.360

Providing and fixing UPVC SWR Pipe for Soil and waste discharge system conforming to IS : 13592 Type B, including jointing with seal ring and solvent, (i) Single socketed pipes.

NS-1 75 mm dia Metre 20 20.000

NS-2 110 mm dia Metre 60 60.000

Providing and fixing UPVC SWR Pipe fittings for Soil and waste discharge system conforming to IS : 14735, including jointing with seal ring and solvent.

NS-3 75 mm dia Each 5 5.000

NS-4 110 mm dia Each 10 10.000

NS-5 75 mm dia Each 5 5.000

NS-6 110 mm dia Each 10 10.000

NS-7 75 mm dia Each 7 7.000

NS-8 110 mm dia Each 7 7.000

NS-9 75x75x75 mm dia Each 5 5.000

NS-10 110x110x100 mm dia Each 7 7.000

NS-11 110x110x75 mm dia Each 7 7.000

NS-12 75 mm dia Each 3 3.000

NS-13 110 mm dia Each 3 3.000

NS-14 110x75 mm dia Each 10 10.000

NS-15 110x110 mm dia Each 10 10.000

NS-16 Pipe 160 mm metre 24 24.000

NS-17 Pipe 50 mm metre 5 5.000

NS-18 Coupler 160 x 160 mm each 5 5.000

NS-19 Coupler 160 x 110 mm each 5 5.000

NS-20 Coupler 160 x 75 mm each 4 4.000

NS-21 Coupler 110 x 75 mm each 5 5.000

NS-22 Coupler 50 x 50 mm each 3 3.000

NS-23 Door Tee 160 x 110 mm each 4 4.000

NS-24 Plain Bend 160 x 160 mm each 4 4.000

NS-25 Plain Bend 50 mm each 3 3.000

NS-26 Plain tee 50 mm each 3 3.000

NS-27 Plain tee 110 x 110 mm each 3 3.000

NS-28 Plain tee 75 x 75 mm each 3 3.000

NS-29 Half Bend 110 x 110 mm each 3 3.000

NS-30 Half Bend 75 x 75 mm each 3 3.000

NS-31 Reducing Tee 160 x 110 mm each 5 5.000

NS-32 Providing and fixing Health Faucet with 1.2 m flexible tube and wall hook Jaquar make Item code ALD-573 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-33 Providing and fixing click clack Waste Coupling 32 mm size full thread Jaquar make item code ALD-727 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 6.000

NS-34 Providing and fixing Bottle Trap (with internal partition) 32mm size 250 mm & 190 mm long wall connection pipes & wall flange Jaquar make item code ALD-769L250x190 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 6.000

NS-35 Providing and fixing Single Piece-WC with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, fixing accessories and accessories set, cistern fittings, S Trap-300 mm size (390x710x730) mm Jaquar make item code VGS-WHT-81853S300UF all complete. or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-36 Providing and fixing Angular stop cock with wall flange Jaquar make item code OPP-15053PM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 24 24.000

NS-37 Providing and fixing 2 Way Bib Cock with wall flange Jaquar make item code OPP-15041PM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-38 Providing and fixing exposed part kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal (compatible with ALD-083, ALD-089 & ALD-081) Jaquar make item code OPP-15083KPM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-39 Providing and fixing Single Lever Tall Boy with 150mm Extension Body Fixed Spout without Popup Waste System with 600 mm long braided hoses Jaquar make item code OPP-15005BPM all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 6.000

NS-40 Providing and fixing Single Towel Rail 600mm Long, Stainless Steel Jaquar make item code AKP-35711PS all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-41 Providing and fixing Towel Ring Square Jaquar make item code AKP-35721P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-42 Providing and fixing Soap Dish Holder Jaquar make item code AKP-35731P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-43 Providing and fixing Toilet Roll Holder Jaquar make item code AKP-35751P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-44 Providing and fixing Double Coat Hook Jaquar make item code AKP-35761P all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-45 Providing and fixing Reduced Body of concealed Stop Cock suitable for 15mm Pipe Line with Plastic Protection Cap (without exposed parts). Jaquar make item code ALD-069FT all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-46 Providing and fixing Storage Water Heater 15 litres Jaquar make item code Elena 5 Star Rating all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-47 Providing and fixing Soap Dispenser Push Button Jaquar make item code SDR-WHT-DJ0010F all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-48 Providing and fixing Hand Dryer Flash touch-free infrared hand dryer with 1150W rated power & carbon brush motor Material : 304 Stainless Steel and Finish: Stainless Steel Finish Jaquar make item code HDR-SSF-AK2807 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-49 Providing and fixing Sensotronic concealed type flushing valve for urinal complete set with installation box with control cock Jaquar make item code SNR-STL-51087 or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 6.000

NS-50 Providing and fixing Urinal with fixing accessories set size 385x325x635 mm Jaquar make item code URS-WHT-13253N all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 6.000

NS-51 Providing and fixing Urinal Partitions Curved/ Rectangular shaped with frosted glass 8mm Chrome finish Jaquar make item code JSE-CHR-810UC450X all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-52 Providing and fixing beveled edge mirror with minimum thickness of 8 mm of superior glass (of approved quality) complete fixed on wall with superior quality SS Studs and spacers of suitable dimensions as per approved drawing and as direction of Engineer-in-charge. sqm 5 5.000

NS-53 Providing and fixing Counter Top basin Size(mm) 495x395x150 Jaquar make item code SLS-WHT-25909 all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 6 6.000

NS-54 Supplying, fixing & Installing 300 mm Tower Bolts of Godrej make all complete.

Attach Toilets sqm 2 2.000

Common Toilet sqm 3 3.000

IC Room sqm 1 1.000

NS-55 Supplying, fixing & Installing Door Locks of Godrej make item code DC4880PONEH15DLAB all complete. each 6.000

NS-56 Supplying & Fixing of Square Drain CP Jali 150 x 150 mm each 10 10.000

NS-57 Providing & Fixing of 2 LT Opal Glass Wall Lamp Jaquar Make Item Code DBL-CHR-MB48012D all complete or equivalent model in Hindware/ Parryware/ Cera/ Somany or equivalent. each 4 4.000

NS-58 Providing and fixing Premium Quality Glazed Vitrified Wall Tile Kajaria make or equivalent (thickness to be specified by the manufacturer), of approved shade and textures of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over existing plastered surface , laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS:15477, in average 6 mm thickness including grouting of wall tiles with epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardner and 0.20 kg of resin per kg),including filling/grouting and finshing complete as per directions of Engineer-in-charge.

Size of tile 600 mm x 1200 mm

Common Washrooms sqm 90.840

Attach Washrooms sqm 40.000

Pantry sqm 15.000

Total = 145.840

NS-59 Providing and laying Premium Quality Vitrified floor tiles (Matt) of size 600x600 mm (thickness to be specified by the manufacturer) of approved shade and colour laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Incharge room attach washroom cum 1 1.59 1.44 2.274

Maintenance room attach washroom cum 1 1.59 1.44 2.274

Common Washrooms cum 2 4.45 3.12 27.768

NS-60 Providing and laying premuim quality Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Glazed Vitrified tiles Matt/Antiskid finish of size

Total = 263.000

NS-61 Providing and laying premuim quality Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.

Glazed Vitrified tiles Matt/Antiskid finish of size

NS-62 Providing and fixing in position Aluminium Frame Work of hollow sections of specified sizes given below for partitions, paneling, boxing, soffits of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips with vertical & horizontal members at not more than 600 mm center to center all complete including necessary additional supports for fixing of patch fittings of door, bracing, runner etc. so that lateral movement is arrested as per instructions of EIC / Architect. The first horizontal member shall be fixed at ground level and thereafter at every 600mm. Frame work will be measured and paid as per actual measurement on site. The item is to be completed in all respects as per detail drawing as specified and as directed by EIC / Architect.

SIZE 50 x 25 x 1.60 MM / 50X50X1.7mm or any other suitable section as approved by EIC

Control Room Partition wall.

NS-63 MDF Panelling with High Gloss Deco Paint - Providing & Fixing 12mm thick MDF board over existing frame/walls with screws , plastic gutties ensuring complete levelling of the wall including one coat of epoxy ,polister putty ,deco putty,spray surfacer and high gloss paint with spray. All complete as per architectural drawing and as directed by Engineer-in-charge.

12mm Thick MDF Base

IC Room Sqm 1 4.58 3.00 13.740

IC Room Sqm 1 4.98 3.00 14.940

Pantry outer wall Sqm 1 4.25 3.00 12.750

Straight Wall Sqm 1 3.00 3.00 9.000

NS-64 Providing and fixing ready made PVC Moulding of 25-50 mm wide and 12-18 mm thickness including P.U Paint in desired shade and finish.All complete as per architectural drawing and as directed by Engineer-in-charge.

IC Room metre 1 65.00 65.000

IC Room metre 1 65.00 65.000

Pantry outer wall metre 1 65.00 65.000

NS-65 WPC Louvers Panelling - Providing and fixing of WPC (Wood Polymer Composite) louver panels over existing wall/partition/frame of approved size,shade and design.All complete as per architectural drawing and as directed by Engineer-in-charge.

Wall of Server & Battery on recpetion end. Sqm 1 10.00 3.00 30.000

NS-66 Providing and fixing Storage units like as (Counters, Cabinets, Consoles & Coffee racks) Sides, top, bottom, shelves , vertical dividers are to be made out of 18 mm thick marine ply confirming to IS 710:2010 (Century Ply or equivalent) with written warranty of 20 years. Exposed parts to be laminated with 1 mm thick laminate of Merino,greenlam or equivalent , plain or textured as shall be finalized during execution and unexposed parts to be laminated with 0.8 mm thick balancing lamination. Adhesive as per approved list to be used along with nails/screws as per requirements. Ply on facing wall shall be protected with PVC Sheet as per requirements. All the exposed edges shall be covered and sealed with 2mm thick PVC edge banding tape with hot melt glue . The console box shall be provided with gold painted wooden stand.The scope shall also include all hardware fittings e.g. S.S. finish handles of required size, locks, telescopic channels (make as per approved list) for running the drawers, tower-bolts, magnetic catchers etc all complete as per the approved Architectural drawing and as directed by Engineer-in-charge.

Maintainance Room (Overhead Storage)

NS-67 Providing and fixing Drawer units of 450mm deep made in 18mm thick plywood (IS 710) frame work finished with High Gloss laminate of approved shade. This also includes providing necessary hardware like handles, telescopic channels etc of approved make. The internal surfaces of the Drawers units shall be laminated with 1.0mm white laminate . All the exposed internal and external surface of the plywood surface shall be finished in laminate of approved shade with 2mm thick imported rigid PVC edge lipping of approved shade as per the detailed drawing.

Grid Bhawan Building

Hand wash Portion Sqm 4 1.80 0.45 3.240

NS-68 Kitchen Cabinet( UNDER COUNTER )

( 3M X 750MM X 600MM)

Providing and fixing in position 600 mm deep,900 mm car cases. Item to be completed in all respects as per drawings and instructions from EIC / Architect as detailed below:

Sides, top, bottom, shelves (not exceeding 450mm c/c), vertical dividers are to be made out of 18mm thk Marine grade plywood (IS 710). External and internal surface are to be finished with 1.0 mm thick laminate AICA (Sunmica) make super white 107 G 324. Shelves and vertical dividers are to be finished with 1 mm thick laminate AICA (Sunmica) make super white 107 G 324 on both the sides except for bottom which will be finished from inside only. Shelves are to be suitably supported on SS buttons.

Shutters - PU coated Made out of 18 mm thick plyboard as shown in the drawing finished with 1 mm thick laminate AICA (Sunmica) of approved shade on external & AICA (Sunmica) make super white 107 G 324 on internal surface.

8mm thick Marine grade plywood (IS 710) backing finished with 1.0mm thick laminate AICA (Sunmica) make super white 107 G 324 on internal surface.

NS-69 Providing and laying of wall paper of approved make laid over the existing surfaces after cleaning the existing surfaces, scrapping and rubbing with sand paper, using wall paper adhesive to match the shade of wall paper. The rate shall include cost of material, conveyance, seigniorage charges on material, labour charges on operations complete etc. for finished item of surfaces. Payment shall be made for the exposed area only. The rate to include cost of Wall paper, Wastages and Synthetic resin etc. Item is to be completed in all respects as per the direction of Engineer-In-Charge & strictly in accordance with the approved architectural drawings.

Control Room wall (if required) Sqm 1 5.00 3.00 15.000

Sqm TOTAL 15.000

NS-70 Providing and fixing of PVC made photo frames with size varying in between 1' to 2' x 1' to 2' inclusive of best quality coloured/black & white printed image as per the image approved /provided in soft format by the Engineer-In-charge , water proof backing sheet and transparent glass covering in front, and fixed on site all complete as per the approved Architectural drawing and & pattern approved by Engineer-in-charge.

Grid Bhawan Building

Control room straight wall Nos 9 1.00 9.000

Corridor Nos 9 1.00 9.000

NS-71 Providing and fixing ultra LED Rope light in colour warm white of approved make all complete as per architectural drawing and as directed by Engineer-in-charge.

Grid Bhawan Building

Waiting area wall Metre 1 25.00 25.000

NS-72 PU POLISH

Grid Bhawan Building

High Gloss PU Polish on all visible sides with sanding one coat of seller reparing. again one coat of seller and two coats of PU spray. All complete as per architectural drawing and as directed by Engineer-in-charge.

Incharge Room Sqm 1 4.98 3.00 14.940

Control Room partition Sqm 3 12.00 0.40 14.400

NS-73 Providing and fixing Non-reflective matte, frosted, scratch resistent, high performance resin coated polyster film with required frosting pattern on the glass surface complete as per the directions of EIC/Architect (Payment shall be made for the finished area of the film actually provided. No deduction shall be made for openings upto 0.1 Sq.m. area each and nothing shall be paid extra for making such openings.)

Video Conference Fixed Glass Sqm 1 12.00 1.00 1.00 12.000

NS-74 Making in position of floor cable duct size 1'x1'x4" smooth ,aligned brushed clean and painted with water proof paint silicon based as per drawing and entire to the satisfication of site engg.

NS-75 Providing and fixing Glass wall partition with 12 mm thick toughened glass fixed in Wall Connecting profile of Dorma make with code XL C 4026A or other equivalent brand. The wall connecting profile should be Aluminium Silver Finish Safety Wall Connecting Profile, including all fitting & accessories as required for ensuring secure support of the glass with connecting profile all complete as per drawings & as per the discretion of Engineer-In-Charge.

Control room Sqm 1 14.00 1.00 3.00 42.000

NS-76 Providing and fixing in position suspended, rigid monolithic POP false ceiling made out of following : a) Supply & Installation of GI Channels, Cross, Angle,hangers frame made out of 24 Guage GI Section fixed rigid in position with grid not increasing 750 x 750 mm size , as per ceiling design and drawings. b) Supply & Installation of GI Jali over frame with washers , nuts,screws and bolts. c) Supply & Installation of POP Paste over jali work smooth in level as per design & drawings and to the discretion of EIC.

CEILING VIDEO CONEFERNCE ROOM Sqm 1.00 109.65 1.00 1.00 109.650

INCHARGE ROOM Sqm 1.00 22.81 1.00 1.00 22.810

NS-77 Extra for supplying and providing U Shaped boxes made out of 12 mm thick ply on all sides & screwed safely on GI Frames. U Shaped ply box is further covered with veneer of approved make on exposed side & PU Polish including cutting grovees for lights all complete as per drawings and discretion of EIC.

CEILING VIDEO CONEFERNCE ROOM Sqm 1.00 35.00 1.00 1.00 35.000

NS-78 Supplying, fitting & fixing in position 600mmX1800mm rollup curtains coloured 0.33 mm thickness acrylic coated cleanable/washable, manually rollup blinds (Marvel or its equivalent, as approved) inclusive of all recommended accessories colour pattern etc., as per approvalof EIC. The cost includes all the material, labour, transportation taxes etc., complete for the work. Sqm 1 115.63 1.00 1.00 115.630

NS-79 Providing and fixing of System Aluminuim fixed windows made from extruded aluminuim profile sections of size 45 mm x 50 mm, manufactured from Al alloy grade T6-6063, duly powder coated as per approved shade. The Glazing shall consist of Double Glass unit (DGU) comprising of 8 mm toughened glass (outer) + 16 mm air gap filled with argon gas + 8 mm toughened glass (inner), factor sealed with spacer and primary/secondary sealants to ensure thermal and sound insulation. The sysytem shall be installed complete in all respects including necessary cleats,gaskets,fasteners, sealants and making the installation water tight, airtight and structurally stable all complete as per specifications & discretion of EIC.

All windows on Exterior Sqm 8 4.00 1.80 1.00 57.600

NS-80 Providing and fixing of 12 mm thick toughened glass door with dorma or equivalent make bottom rail (TA/TP easy safe door rail) fitted with dorma floor machine, top patch pivotal including all accssories all complete as per site requirements & discretion of EIC.

Main Entrance Door sqm 1 1.500 2.100 3.150

NS-81 Extra for supplying and providing smart drill free glass door biometric lock ozone or equivalent brand.

Main Entrance Door /Control room door/Battery/Server/UPS each 5 5.000

NS-82 Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat of approved primer on one face and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately)

18 mm thick commercial ply conforming to IS : 1328 BWR type.

Control Room Partition Sqm 3 12.00 0.40 14.400

ABSTRACT OF COST

S.No Item Code ( HPSOR 2020) Description of item Unit Quantity Rates as per HPSOR 2020 (Rs) Amount( Rs)

1 15.9.2 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar m3 111.60 1011.75 112911.30 Cement Sand Aggregate

2 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. ( All kind of soil) m3 31.36 171.40 5375.10

3 4.2.3 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size). m3 9.52 7107.10 67659.59 60.928 4.284 8.4728 10.24 6.4 65.536

4 5.9.1 Form work foundations, footings, bases of columns, etc. for mass concrete m2 3.20 216.45 692.64 60.928 4.284 8.4728

5 7.2.1 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) m3 163.72 5843.55 956706.01 2

Material Consumption

S.No Item Code ( HPSOR 2020) Material Unit For RRM For PCC/ Stone Back filling Total

3 1.2.12 Stone aggregate below 40mm nominal size Cum 0.00 9.52*0.89 = 8.47 8.47 8.47

Carriage of material by mannual labour for Lead of 1.00Km

S.No Item Code Material Unit Quantity Rates as per HPSOR 2020 (Rs) for 1.00Km Amount (Rs)

3 1.2.5 Stone aggregate below 40mm nominal size m3 8.47 519.26 4398.13

Total Amount Rs (B) 37538.74

Garnd Total Amount Rs ( A+B) = 1,180,883.38

( C) Qty of Stone used for existing/ Damaged RRM Wall m3 111.60*1.2 = 133.92 Amount (Rs)

1 1157 Qty of stone available after dismantling the damaged wall m3 133.92*30% = 40.18 1100.00 44198.00 40.18 1100 44198

Deduction for stone available (C) 44198.00

* Note : The actual quantity of stone available from damaged wall will be worked out after stacking of stone & as per actual stack measurement at site

Net Amount = (A) + (B) - ( C ) = Rs 1136685.38

Grand Total ₹ 1,136,685

PROPOSED RRM AT TOWER LOCATION T- 02 JHAKRI GUMMA

Exsting partially colapse RRM Wall L =8 L=6.75

width on bottom

BASE OF WALL PCC WIDTH

CALCULATION Tower no. 02 RRM WALL

S.No Description of item Unit Measurements

L (m) W (m) Bottom W (m) Top W (m) Average H (m) Qty

1 PCC FOR RRM WALL

2 Dismantling of exsting RRM Wall

3 Providing of RRM wall with hard stone

COST ABSTRACT TN 02 Jhakri gumma

(A) S.No Item Code Description of item Unit Quantity Rates as per DSR 2021 (Rs) Amount( Rs)

1 4.1.5 01:03:06 (1 Cement: 3 coarse sand(zone III) Derived from natural Sources: 6 graded stone aggregate20 mm nominal size derived from natural source ) m3 8.35 6833.40 57,058.89

2 7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) m3 108.43 6653.45 721433.58

stone are avilable on site therefore 50 % cost deduction on item 7.1.1 -360716.79

3 15.9 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : 15.9.2 In cement mortar m3 108.43 2027.10 219798.45

4 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) m3 0.44 7365.15 3240.67

Total A ( Rs) 583755.91