TN-05-89-SIDS-24-25

Amount

1. Renovation of Panchayat Union Elementary School building (South facing) (Tiled Roof) at Mangalapatti, H/o Sirankattupatti Estimate Amount Rs. 5.84 Lakhs

Dismantling the damaged Mangalore tiles and clearing away from site including all labour charges

CC 1:4:8 mix using 40mm ISS HBG metals including cost and conveyance of all materials and all labour charges etc., complete complying with standard specification and as directed by the departmental officers.

Supply and delivery of MS Hollow tubular sections of size 100mm x 50mm x 3.20mm having a unit weight of 7.01 kg/m including cost and conveyance of all materials to site and labour charges for cutting, welding and fixing the truss to propoer position etc., complete

Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers.

Distempering the old walls and ceiling two coate with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Painting two coats with black oxide paint including cost & conveyance of all materials to site and all labour charges etc., complete.

Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point(for electronic regulator) - S.D.No: 20

Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150 x 100 x 113 TW switch box for 5A 3pin non inter locking CS plug with painting of suitable colour with continuos earth wire connection of 14 SWG TC wire for open PVC plug - S.D.No: 36

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting - S.D.No: 88

Towards the cost for Providing exclusive Cub board with Locking facility for Teachers including cost and conveyance and all labour charges etc.,complete

Towards the cost for Providing exclusive Cub board for keeping the Lunch boxes of the Students including cost and conveyance and all labour charges etc.,complete

Towards the cost for Construction of Pedastal for keep the HDPE drinking water storage tank including cost and conveyance and all labour charges etc.,complete

Towards the cost for Construction of Chappal rack including cost and conveyance and all labour charges etc.,complete

Provision for Name Board

Towards the cost for Providing BaLA painting including all charges etc.,complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

2. Repairs to CWSN Toilet at PUES Mangalapatti, H/O Sirankattupatti Estimate Amount Rs. 0.64 Lakhs

Dismantling existing damaged pressed tiles with weathering course in cement morter carefully for reuse etc

Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials & all labour charges etc., complete.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.

Oil bound distembering two coats using oil bound distember inclluding cost & conveyance of all materials to site and all labour charges etc., complete.

Painting two coats with ready mixed Plastic Emulsion of I st Class Quality paint and of approved colour over a priming coat including through scrapping, clean removal of dirt and cost and conveyance of all materials and labour charges etc,complete.

Painting two coats with enamel paint over old iron work including cost & conveyance of all materials to site and all labour charges etc., complete.

Dadooing wall with Glazed tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 20cmx20cmx20cm of approved quality laid in cement morter 1:3 mix to 12mm thick mixed with water proofing compound confirming to ISS by 2 % weight of cement used and the joint point

Flooring with following ceramic tiles of size 200 x 200 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Provision for Door repairs

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Jeyaraj Jeyaram (BID ID -1169893)