Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹11.8 LAccepted-AOC 2788 FOURTH FLOOR GALI RAJPUTANA ARYA PURA SABZI MANDI NEW DELHI KAMLA NAGAR NORTH DELHI DELHI 110007 UDYAM DL 01 0057966 | NORTH DELHI | DELHI | 110007 | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹13.5 L+₹1.4 L (11.8%)Rejected-AOC PLOT NO RZ B 1 59 KH NO 534 535 BLOCK B 1 NEW ROHANPURA PP NO 1416 NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | 2 | Rejected-AOC 2nd | |
| 3 | 3₹13.8 L+₹1.7 L (14.3%)Rejected-AOC 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | 3 | Rejected-AOC 3rd | |
| 4 | 4₹16.5 L+₹4.5 L (37.0%)Rejected-AOC 110059 NEW DELHI NATIONAL CAPITAL TERRITORY OF DELHI 110059 | WEST DELHI | DELHI | 110059 | 4 | Rejected-AOC 4th | |
| 5 | 5₹17.7 L+₹5.6 L (46.8%)Rejected-AOC | 5 | Rejected-AOC 5th |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
31 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
REPAIR AND CLEANING OF SEWAGE LINE, SEPTIC TANK AND CONNECTED WORKS AT 12 BRD, AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD
2022_MES_571706_1
GE/TKD-71/2022-23
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹500
GE AF TUGHLAKABAD
₹40,000
Yes
27 Jun 2023
29 Dec 2022
2 Feb 2023
5 Jan 2023
31 Jan 2023
12 Jan 2023
Amount
M&L for removal of blockage between manhole to manhole lines, gully trap, floor trap, CI pipe, complete cleaning of manhole sludge of any depth etc of various sizes for sewage line by any means (rodding manually etc) including removing rugs of any type, dirt sludge and silt etc upto the entire satisfaction of Engr-in-charge complete all as specified and directed by Engr-in-Charge. Notes: (i) The rates quoted of the item incudes cost of T&P like rods, bamboos etc. (ii) Minimum 2 sewerman shall be deployed by contractor and they shall be present on all working days from 0830 hrs to 1700 hrs for maintenance of sewage lings. The persons will be detailed by JE/AGE concerned every morning for attending complaints on daily basis. (iii) Inspection of sewage line and preventive repair/maintenance to be carried out by the contractor in routine without waiting for the comlaints from users. The record of the same shall be maintained by the contractor. (iv) The complaint has to be rectified within 8 hrs as given in complaint register, failing which penalty will be imposed to the contractor at the rate of Rs 100/- per complaint.
Cleaning of sewage line of 150 mm bore and including manhole by chasis mounted Diesel run vehicles mounted hydraulic operated high pressure suction cum getting sewer cleaning machine KAMBI-10 LCHB fitted with imported international standard pumps having 3000 ltrs suction capacity including skilled operator or supervisor, Engineer for cleaning/partial desalting of manholes and sewerline as per guide lines laid in IS-11972 (1987) and cleaning of site complete all as specified and directed by Engr-in-Charge. Note: Jetting of sewer line by high pressure betting system of w2200 PSI/suction.
M&L for de-watering/de-sludging of soakage well of liquid or semi-liquid waste by water sucking hydraulic pressure machine including cleaning of all sludge silt residue of both organic and in-organic nature by manual labour or by mechanical scrapper etc, in any position and disposal of all the waste outside defence area, the de-sludging of sewage soakage well is to be carried out upto the bottom slab of sewage sump/sewage/soakage well complete the sewage well wall and bottom slab to be cleaned by water with high pressure upto entire satisfaction of Engr-in-charge and necessary safety precautions to be adhere during working complete all as specified and directed by Engr-in-Charge. Note: The rates included for hydraulic pressure machine of this item.
Demolition and breaking up drain pipes 150mm dia salt glazed stone ware AC or rein forced concrete pipe including PCC haunching etc set in cement mortar including removal from site complete all as specified and directed by Engr-in-charge
Demolition and breaking up drain pipes 200mm dia salt glazed stone ware AC or rein forced concrete pipe including PCC haunching etc set in cement mortar including removal from site complete all as specified and directed by Engr-in-charge
Demolition and breaking up drain pipes 300mm dia salt glazed stone ware AC or rein forced concrete pipe including PCC haunching etc set in cement mortar including removal from site complete all as specified and directed by Engr-in-charge
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.
Excavation in trenches exceeding 1.5m but & not exceeding 3.0m depth for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exceeding 10 Sqm on plan and getting cut in soft/loose soil complete all as specified and directed by Engr-in-charge.
Demolition of brick masonry built in cement mortar complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete in ground floors and pavings etc not exceeding 15cm thick above or below ground level complete all as specified and directed by Engr-in-charge.
M&L for plain Cement concrete (1:4:8) type C-2 using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class 'B' bricks, straight of curved on plan exceeding 6M mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
M&L for Salt glazed stoneware drain pipes 150mm grade ‘A’ internal dia laid in trenches and jointed complete all as specified and directed by Engr-in-charge.
M&L for 150mm reinforced concrete pipes, class NP3 and jointed complete with collars complete all as specified and directed by Engr-in-charge.
M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate for 150mm bore of pipe as concrete bed to drain pipes including packing under and haunchng against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge
M&L for Salt glazed stoneware drain pipes 200mm grade ‘A’ internal dia laid in trenches and jointed complete all as specified and directed by Engr-in-Charge.
M&L for 200mm reinforced concrete pipes, class NP3 and jointed complete with collars complete all as specified and directed by Engr-in-charge.
M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate for 200mm bore of pipe as concrete bed to drain pipes including packing under and haunchng against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge
M&L for 300mm reinforced concrete pipes, class NP3 and jointed complete with collars complete all as specified and directed by Engr-in-charge.
M&L for PCC (1:3:6) type C2 using 40 mm graded granite stone aggregate in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 300 mm bore complete all as specified and directed by Engr-in-charge.
Removing excavated material not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.
M&L in replacement for pre cast perforated RCC drain cover with frame (rectangular or square) the area of each cover should not be more than 0.5 square mtr and thickness of 60mm each with holes manufactured with M-30 grade of concrete by Vibro Compaction process using accurately designed molds and as suitable reinforced to enable the covers to take load as specified i.e 20 MT for Heavy duty (when tested as per IS-12592) complete all as specified and directed by Engr-in-charge. Make: Terra firma/KK Manual Pvt Ltd/ Uattam
S&F in repairs of 100 mm bore cast iron drain drain/waste/vent pipes fixed to walls or floor jointed with lead joints jointed with any material complete all as specified and directed by Engr-in-charge.
M&L for Cast iron door bends of 100 mm dia complete all as specified and directed by Engr-in-charge.
M&L for Cast iron branch pieces of 100 mm dia complete all as specified and directed by Engr-in-charge.
M&L for removing silt/soil, any description from storm drain of any size complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
S&F in repairs of vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.
M&L for non skid coloured ceramic tiles and matching with existing tile 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and jointed in white/ coloured cement to match over and including 15 mm thick backing coat in cement mortar (1:6), including demolition of floor (terrezo/ PCC/Tiles of any description) including cement mortar bedding but not backing) and removing the rubbish from the complex complete all as specified and as directed by Engr-in-charge. Make:- Jhonson/Somany/Kajaria/Orient
M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in man hole, surface channel and drain complete including finished surface complete all as specified and directed by Engr-in-charge.
M&L for glazed coloured ceramic tiles (450mm x 350mm) x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick cement back coat in CM (1:4) as on vertical surfaces such as skirting, dados etc complete all as specified and directed by Engr-in-charge.
M/S CHANDER MUNI
MOHIT ENTERPRISES
V r traders
M/S RK Builders
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .