Construction of phase one administrative block in Govt polytechnic at Kalpa District Kinnaur SH Providing main LT panel and yard lighting therein

Amount

Supplying & erection of wall/floor mounted MCCB 100 Amp. with bus-bar L.T. Panel approx. size: 850(H)x450(W)x250(D)mm, suitable for Indoor applications, having Main Incomer DN0-100D-100 Amp. 36KA (L&T) cat No.CM97919OOK2OG with thermal magnetic release O/L & S/C protection, Digital VAF Metering (L&T) cat No.WL411010OOOO showing voltage,current frequency with suitable C.T., R-Y-B Indicating lamp (L&T) with seprate controling MCB SP 6 amp., 200 Amp. AL Busbar, fabricated with 16-SWG CRCA sheet compartmentalized type enclosure, IP:42 indoor protection powder coating shade: RAL 7032-Siemens Grey as per design & drawing including the cost of all accessories, making connections, testing and commissioning etc. as required to the best satisfaction fo Engineer-in-Charge.

Supplying & erection of wall/floor mounted MCCB 200 Amp. with bus-bar L.T. Panel approx. size: 850(H)x450(W)x250(D)mm, suitable for Indoor applications, having Main Incomer DN2-250D MCCB-4P 200 Amp. 36KA (L&T) cat No.CM92109OOP1OG with thermal magnetic release O/L & S/C protection, Digital VAF Metering (L&T) cat No.WL411010OOOO showing voltage,current frequency with suitable C.T., R-Y-B Indicating lamp (L&T) with seprate controling MCB SP 6 amp., 200 Amp. AL Busbar, fabricated with 16-SWG CRCA sheet compartmentalized type enclosure, IP:42 indoor protection powder coating shade: RAL 7032-Siemens Grey as per design & drawing including the cost of all accessories, making connections, testing and commissioning etc. as required to the best satisfaction fo Engineer-in-Charge.

Sub-Main Distribution Panel:- Providing and fixing floor/wall mounted L&T make SMDB Panel TN630D, O/G COMBI 4-Ways Panel of suitable dimensions made from 1.6 mm thick CRCA sheet, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels, interconnections, phosphatized and powder painted and LED phase indicating set, Digitial Metering complete with following accessories including earthing etc. as required : -

SMDB Panel Highlights: -

►Compliance with latest standard - IEC 61439-3

►DEKRA and ASTA certified

► Ingress protection - IP 44

Provision for :-

Main MCCB Incomer 400 Amp.

Outgoing COMBI 4-way Sub-Incomer MCCB

Size: - 1067mm(H) x 870mm(W) x 208.5mm(D)

Cat.No.-DA6AD1044CZZ0 = 1 No.

Incoming Device: -

►DN3-400D 3 Pole MCCB - 400A breaking capacity-50KA = 1 No.

Cat.No.- CM94005OOR1OG

Outgoing Device: -

►DN0-100D 3 Pole MCCB - 100 A breaking capacity-36KA = 2 No.

Cat.No.- CM97893OOK2OG

►DN1-250N 3 Pole MCCB - 200 A breaking capacity-36KA = 2 No.

Cat.No.- CM98608OONO

Metering, Bottom Cabling & Corner Box: -

Metering Extension Box [Cat.No.CM90439OOPO] = 1 No.

Bottom Cabling Box [Cat.No.CM91062OOOO] = 1 No.

Corner Box [Cat.No.CM91089OOOO] = 4 No.

Left Side Cabling Box [Cat.No.CM91120OOHO] = 1 No.

Right Side Cabling Box [Cat.No.CM91121OOHO] = 1 No.

1Ph LED Ammeter Cl 1 [Cat.No.WL111010OOOO] = 3 No.

1Ph LED Voltmeter Cl 1 [Cat.No.WL111010OOOO] = 1 No.

LED RED Indicator 22.5 mm [Cat.No.EILR240A] = 1 No.

LED Yellow Indicator 22.5 mm [Cat.No.EILY240A] = 1 No.

LED Blue Indicator 22.5 mm [Cat.No.EILB240A] = 1 No.

Providing and fixing of DIN type HRC fuse 400 Amp. with fuse base HB-800 suitable for input voltage 415 V, 50/60Hz, complete in all respect as required. Make: L&T, Havells or any other approved by Engineer-in-Charge.

HRC Fuse 400 Amp.with fuse base HB-800

Providing, Installation, Testing & Commissioning of Servokon/Envanta/Numeric 30-KVA True on-line, (3-ø input & 3-ø output) UPS system with inbuilt Isolation Transformer, True Sine wave Online inverter using IGBT, Manual bypass switch, Inbuilt Static Switch, Alpha Numeric LCD display & Filters for harmonic distortions with inbuilt Phase sequence correction & protection feature complete with installation at site, making connection etc. as required complete in all respects to the best satisfaction by Engineer-in-Charge.

Providing, Installation, Testing & Commissioning of Amaron/Quanta/EXIDE make batteries 65AH & 12Volt to provide approx. 60 mins. backup time, complete with installation at site, making connection etc. as required complete in all respects to the best satisfaction by Engineer-in-Charge.

Providing, Installation, Testing & Commissioning of Battery Rack & Connecting cables complete with installation at site etc. as required to the best satisfaction by Engineer-in-Charge.

Supply and installation of Twinkle make LuxMax Steel Poles-114 are made out of Galvanised Mild steel tubes having 114mm dia at bottom and 60/75mm dia at Top with cast alum. Embellishments-Q3. The Poles are primer coated and painted with Polyurethane paint. Poles are suitable for Single/Double/Triple/Four Side Post Top/Drop Down Luminaires. The Poles has a service window at the bottom comprising four way 25Amp connector terminal and a MCB. Poles has a mild steel base plate having four numbers mounting holes as per drawing and can be mounted with four numbers anchor bolts. Foundation RCC 1:2:4 shall be of size 550x550mm and depth 1200 mm c/c as per approved drawing.The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing, complete in all respects as required:-

Single Arm bracket Steel Pole - 6 m long.

Providing and installation of following type of LED Street Light Fitting with pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP 66 protection complete with all accessories including making connections, testing etc. as required with Two Year warrenty. Make: Twinkle, Philips, GE or any other approved by Engineer-in-Charge.

LED Street Light 90 Watt

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-

Armoured cable 4 sq. mm (twin core)

Armoured cable 240 sq. mm (3.5 core)

Supplying and fixing of following size Jindal make G.I. Pipe Heavy Class direct in ground to be laid 1-meter below the ground level along with all accessories and also refilling the trench etc. of the required size : -

65-mm ( 2½ ") dia. G.I. Pipe, Heavy class

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub-main wiring/cable as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Supplying and erection of floor mounted fixed type metal frame work / boards of welded construction for switch gear mounting fabricated with M.S. angle iron (50 mm x 50 mm x 6 mm thick) of suitable dimensions with supporting members grouted 23 cm underground and frame work covered with 3mm thick M.S. sheet from top to a given height, with M.S. angle iron / 50mmx50mmx 6mm thick welded on the back and grouted into the back wall complete with painting and bonding to the existing earth as required:-

ARUN KUMAR SHARMA