CERTAIN MINOR, REVENUE AND SPECIAL REPAIR WORKS AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. 24/MIN/61SA/2022-23:25 34/MIN/61SA/2022-23:45 27/MIN/61SA/2022-23:56

Excavation in trenches n.exc 1.5m wide & n.exc 1.50m in depth for foundation , etc or for shafts, wells, cess pits, man holes,pierholes etc n. exc 10 sqm on plan & getting out in soft/loose soil complete all as specified and directed. 24/MIN/61SA/2022-23:8 34/MIN/61SA/2022-23:28 27/MIN/61SA/2022-23:20 13/REV/61SA/2022-23:173 24/MIN/61SA/2022-23/EM:20

All as per the description of serial item 2 here in above but depth exceeding 1.5 meter and n.exceeding 3.00 meter. complete all as specified and directed. 13/REV/61SA/2022-23:1.2

M&L PCC 1:4:8 Type D-2 (40 mm graded stone aggragate) as in fdn, filling and mass concrete/ foundation of poles complete all as specified and directed. 24/MIN/61SA/2022-23:2 34/MIN/61SA/2022-23:3 27/MIN/61SA/2022-23:3 13/REV/61SA/2022-23:3

M&L Flat formwork to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter rough concrete finish complete all as specified and directed. 24/MIN/61SA/2022-23:13

M&L for RCC nominal mix Type B1 1:2:4 (20mm graded stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and directed. 24/MIN/61SA/2022-23:3

Formwork to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished / flat surfaces in shape complete all as specified & as directed. 24/MIN/61SA/2022-23:21.5

M&L for RCC nominal mix Type B1 1:2:4 (20mm graded stone aggregate) for columns, pillars, pierrs, posts & struts etc complete all as specified & as directed. 24/MIN/61SA/2022-23:1.3

Flat formwork to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc rough concrete surface complete all as specified & as directed. 24/MIN/61SA/2022-23:16.00

M&L for RCC nominal mix Type B1 1:2:4 (20mm graded stone aggregate) for beams cantilevers bressumers, lintels over 1.5m span etc complete all as specified & as directed. 24/MIN/61SA/2022-23:1.10

Flat rough finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc complete all as specified & as directed. 24/MIN/61SA/2022-23:30 34/MIN/61SA/2022-23:45

Rough finish flat surface of concrete Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & as directed. 24/MIN/61SA/2022-23:22 34/MIN/61SA/2022-23:20

M&L for RCC nominal mix Type B1 1:2:4 (20mm graded stone aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc complete all as specified & as directed. 24/MIN/61SA/2022-23:5 34/MIN/61SA/2022-23:4.6

Formwork to rough finished flat surfaces of contrete of chullah hoods, chajjas, troughs and similar items including edges complete all as specified & as directed. 24/MIN/61SA/2022-23:1.5 34/MIN/61SA/2022-23:2

M&L for RCC nominal mix Type B1 1:2:4 (20mm graded stone aggregate) for chajjas complete all as specified & as directed. 24/MIN/61SA/2022-23:0.35 34/MIN/61SA/2022-23:0.5

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming complete all as specified & as directed. 24/MIN/61SA/2022-23:780 34/MIN/61SA/2022-23:150

M&L for mild steel TMT bars 5mm dia and overupto and including 10mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming complete all as specified & as directed. 24/MIN/61SA/2022-23:20 34/MIN/61SA/2022-23:20

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming complete all as specified & as directed. 24/MIN/61SA/2022-23:240 34/MIN/61SA/2022-23:280

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & as directed. 24/MIN/61SA/2022-23:14.5 31/SR/61SA/BLDG/2022-23:2 34/MIN/61SA/2022-23:15.5 27/MIN/61SA/2022-23:30

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius half brick thick wall built in CM (1:6)complete all as specified & as directed. 24/MIN/61SA/2022-23:7 34/MIN/61SA/2022-23:10 31/SR/61SA/BLDG/2022-23:60

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement complete all as specified & as directed. 24/MIN/61SA/2022-23:45 31/SR/61SA/BLDG/2022-23:60 34/MIN/61SA/2022-23:25 36/MIN/61SA/22-23:105

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces of walls of walls in CM 1:4 finished even and fair without using extra cement complete all as specified & as directed. 24/MIN/61SA/2022-23:52 31/SR/61SA/BLDG/2022-23:90 34/MIN/61SA/2022-23:60 36/MIN/61SA/22-23:80

M&L rendering 10mm thick in CM 1:3 on ceiling surface, surface finsihed even and fair without using extra cement complete all as specified & as directed. 24/MIN/61SA/2022-23:22 31/SR/61SA/BLDG/2022-23:30 34/MIN/61SA/2022-23:30

M&L on wall and applying Two coats of 100% Premium acrylic emulsion paint on plastered surfaces of wall having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces over and incl 1mm thick wall care putty on wall complete all as specified & as directed. 24/MIN/61SA/2022-23:52

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper on walls over and incl 1mm thick wall care putty complete all as specified & as directed. 24/MIN/61SA/2022-23:45 31/SR/61SA/BLDG/2022-23:60 36/MIN/61SA/22-23:105

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash & 1mm thick wall care puty complete all as specified and directed. 24/MIN/61SA/2022-23:22 31/SR/61SA/BLDG/2022-23:30 34/MIN/61SA/2022-23:30

M&L plain cement concrete type C-1 1:3:6 (using 20mm graded stone aggregates) as in plinth protections 75 mm thick finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3. m c/c filled with mastic mortar complete all as specified & as directed. 24/MIN/61SA/2022-23:18 31/SR/61SA/BLDG/2022-23:64 27/MIN/61SA/2022-23:30 34/MIN/61SA/2022-23:15

M&L Sand Filling under floors including spreading,watering and levelling in layers n exc. 25 cm thick complete all as specified & as directed. Note :- Soil obtained from excavation under item relevant item here-in-before shall be used for filling., 24/MIN/61SA/2022-23:3 34/MIN/61SA/2022-23:8 27/MIN/61SA/2022-23:6 Note : Entire earth (soil) obtained from excavation shall be used for filling under floor and additional soil (if required) shall be measured under above item

M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete all as specified & as directed. 24/MIN/61SA/2022-23:3.4 34/MIN/61SA/2022-23:5 27/MIN/61SA/2022-23:6

M&L 75mm thick cement concrete 1:4:8, type D2 (40mm graded stone aggregate) sub base of floor complete all as specified & as directed. 24/MIN/61SA/2022-23:16 34/MIN/61SA/2022-23:20 27/MIN/61SA/2022-23:30

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified & as directed. 24/MIN/61SA/2022-23:4.8 31/SR/61SA/BLDG/2022-23:16 52/MIN/61SA/2022-23:6

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. 24/MIN/61SA/2022-23:1.5 31/SR/61SA/BLDG/2022-23:6 52/MIN/61SA/2022-23:2.1

Removing excavated material Exc to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the sarting point complete all as specified & as directed. 24/MIN/61SA/2022-23:3 34/MIN/61SA/2022-23:10 27/MIN/61SA/2022-23:14.7 13/REV/61SA/2022-23:74 24/MIN/61SA/2022-23/EM:9

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & as directed. 24/MIN/61SA/2022-23:5 34/MIN/61SA/2022-23:18 27/MIN/61SA/2022-23:5.3 13/REV/61SA/2022-23:100 24/MIN/61SA/2022-23/EM:11

M&L Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. 24/MIN/61SA/2022-23:12 31/SR/61SA/BLDG/2022-23:54

M&L Anodised aluminium door shutters aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc. complete all as specified & as directed. Note: Rate shall be inclusive of 4.8mm thick plain sheet for glazing etc. 24/MIN/61SA/2022-23:2.52 31/SR/61SA/BLDG/2022-23:15

M&L Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified & as directed. Note: Rate shall be inclusive of 4.8mm thick plain sheet for glazing etc. 24/MIN/61SA/2022-23:0.36 31/SR/61SA/BLDG/2022-23:17

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & as directed. 24/MIN/61SA/2022-23:5 31/SR/61SA/BLDG/2022-23:15

S&F Coloured Glazed ceramic tilessize 450X 350X 7mm thick in vertical surface edge cut/ joint free , on walls etc. set & jointed in neat cement slurry as in dado and skirting & pointed in white/coloured cement to match over 10mm thick plaster in CM(1:4) complete all as specified & as directed. 24/MIN/61SA/2022-23:12 31/SR/61SA/BLDG/2022-23:55 34/MIN/61SA/2022-23:55 52/MIN/61SA/2022-23:35 51/MIN/61SA/2022-23:120 27/MIN/61SA/2022-23:90

S&F Coloured Non Skid ceramic tiles 6 to 7mm thick of joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) complete all as specified & as directed. 24/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:40

S&F double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and and laid over 15mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified & as directed. 24/MIN/61SA/2022-23:9

S&F double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in dado & skirting etc. set and jointed in neat cement slurry and laid over 10mm thick screed bed in CM 1:4 and pointed in white or coloured cement to match complete all as specified & as directed. 24/MIN/61SA/2022-23:1.2

M&L for machine cut mirror polished kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar laid over and including 15mm thick cement plaster in CM 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and complte all as specified and directed by Engr-in-charge. 24/MIN/61SA/2022-23:2

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying roof treatement in CM 1:3 mixed with WPC @ the rate of manufacture instruction by weight of cement complete all as specified & as directed. 24/MIN/61SA/2022-23:21 Note : WPC supply will be measured seperately.

Supply only Liquid water proofing compound complete all as specified. 24/MIN/61SA/2022-23:7.5 31/SR/61SA/BLDG/2022-23:15

Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray/brush applied, membrane with an elongation of 350% and tensile strength of 4.7 N/mm2 as per AST D412, crack bridging ability of 3mm. The system includes final base preparation, water based epoxy primer and applying Smart Care PU Magnum in two coats to achieve a min. thickness of 1.2 mm, etc. complete as per Manufacture specifications (ii) Necessary guarantee for 10 years shall be submitted by the contractor. Make: Sika/ Asian Paints/ IWL/ Berger Paints 24/MIN/61SA/2022-23:21 31/SR/61SA/BLDG/2022-23:110

S&F Snow white color Vitreous China padestal pattern WC wall mounted with flushing cistern PVC sheet cover size 670x390x780 (Make : Cera Clair Cat No S1031102 two piece wall jung Extended EWC cat Part No S1060102 Cistern Cat No. B1510108 clair seat cover Cat No. B1810105 Twin flush fittings or equivalent) complete all as specified & as directed. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:3

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & as directed. 24/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:2

S&F Toilet paper holder with flat recessed type stainless steel complete all as specified & as directed. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:3 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:1

S&F Vitreous China wash basin, white, flat back, size 550x400mm but including brackets, coupling and waste pipe complete all as specified & as directed. 24/MIN/61SA/2022-23:1 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1

S&F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm complete all as specified & as directed. 24/MIN/61SA/2022-23:3 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:1

S&F brass CP Angle stop cock fancy type concealled type long body,15 mm bore complete all as specified & as directed. 24/MIN/61SA/2022-23:2

S&F CP fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed-15mm complete all as specified & as directed. 24/MIN/61SA/2022-23:1 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1

S&F PVC connection 15mm dia 45cm long with 2 Nos brass check nuts with washer complete all as specified & as directed. 24/MIN/61SA/2022-23:2 31/SR/61SA/BLDG/2022-23:6 34/MIN/61SA/2022-23:2 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23: 12

M&L for Fancy type MS bracket suitable for curtain rod fixed in repair complete all as specified & as directed. (Pair of 2 Nos) 24/MIN/61SA/2022-23:3 31/SR/61SA/BLDG/2022-23:12

M&L of 20 mm dia Drapery Fancy type CP conduit pipe curtain rod fixed in repair complete all as specified & as directed. 24/MIN/61SA/2022-23:5 31/SR/61SA/BLDG/2022-23:20

M&L for Fancy type caps/ side Bulbs PVC powder coated suitable for curtain rod fixed in repair complete all as specified & as directed. (Pair of 2 Nos) 24/MIN/61SA/2022-23:3 31/SR/61SA/BLDG/2022-23:12

S&F Rotational moulded polyethylene water storage tanks 3 layered (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling water tanks complete all as specified & as directed. 24/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:2

S&F Ball brass valves 20/15mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair complete all as specified & as directed. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:2 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:2

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 500/1000 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish complete all as specified & as directed. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:2

M&L for screed bed or bedding layer of cement mortar 1:4 and 10mm thick for laying floor finishes complete all as specified & as directed. 24/MIN/61SA/2022-23:2 31/SR/61SA/BLDG/2022-23:8

M&L Granite 16 to 18 mm thick (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & as directed. 24/MIN/61SA/2022-23:2 31/SR/61SA/BLDG/2022-23:13 52/MIN/61SA/2022-23:6 51/MIN/61SA/2022-23:6

M&L for 150mm bore salt glazed stone ware drains pipes laid in trenches and jointed complete all as specified & as directed. 24/MIN/61SA/2022-23:10 27/MIN/61SA/2022-23:30 34/MIN/61SA/2022-23:18

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe complete all as specified & as directed. 24/MIN/61SA/2022-23:10 27/MIN/61SA/2022-23:30 34/MIN/61SA/2022-23:18

M&L for providing cement concrete type C-1 1:3:6 (20mm graded aggregate) as in copings etc complete all as specified & as directed. 24/MIN/61SA/2022-23:0.15

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(min wt 300 gms) complete all as specified & as directed. 24/MIN/61SA/2022-23:1

S&F 32 mm dia waste coupling of PTMT (half or full threaded) (min wt 42-45 gms) complete all as specified & as directed. 24/MIN/61SA/2022-23:1

S&F 32mm bore low density polythylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complte to walls, ceiling or in floors etc c complete all as specified & as directed. 24/MIN/61SA/2022-23:0.75

Cutting chases for GI concealed water tubing and making good with cement sand mortar 1:3 cutting n.exc. 10cm girth complete all as specified & as directed. 24/MIN/61SA/2022-23:12

S&F 15mm bore GI water tubing medium grade galvanished with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified & as directed. 24/MIN/61SA/2022-23:12 27/MIN/61SA/2022-23:60

S&F 20mm bore GI water tubing medium gared galvanished with all litting and fixed complete to walls and ceiling or laid in floor complete all as specified & as directed. 24/MIN/61SA/2022-23:8 27/MIN/61SA/2022-23:35

S&F cast iron nahani trap with grating including jointing to waste pipe fixed in cement concete type B-1 (1:2:4) of 75mm bore complete all as specified & as directed. 24/MIN/61SA/2022-23:1

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or on floors complete all as specified & as directed. 24/MIN/61SA/2022-23:3 31/SR/61SA/BLDG/2022-23:12 52/MIN/61SA/2022-23:20

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified & as directed. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:3

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified & as directed. 24/MIN/61SA/2022-23:5 31/SR/61SA/BLDG/2022-23:8 52/MIN/61SA/2022-23:20

S&F 75mm dia PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified & as directed. 24/MIN/61SA/2022-23:2 31/SR/61SA/BLDG/2022-23:3

M&L PVC (SWR) gully trap 125x110 mm setting in jointing with solvent cement complete all as specified & as directed. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:3

S&F 100mm dia stack clamp out of 50mmx5mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified & as directed. 24/MIN/61SA/2022-23:2

S&F 75mm bore PVC (SWR) bends with oval access door complete all as specified & as directed. 24/MIN/61SA/2022-23:2

S&F Door closer hydrau?lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium (extruded section body) complete all as specified & as directed. 24/MIN/61SA/2022-23:1

S&F Brass Mortice lock, vertical type, of 4 Liver size 100 mm complete all as specified & as directed. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:7

S&F mild steel butt hinges 100 mm long med wt complete all as specified & as directed. 24/MIN/61SA/2022-23:3 31/SR/61SA/BLDG/2022-23:6 34/MIN/61SA/2022-23:9 51/MIN/61SA/2022-23:6

S&F aluminium anodised handles for doors cast type anodised 150 mm long complete all as specified & as directed. 24/MIN/61SA/2022-23:2 31/SR/61SA/BLDG/2022-23:6 34/MIN/61SA/2022-23:6 51/MIN/61SA/2022-23:4

S&F aluminioum anodised barrel tower bolts extruded section 200 mm long complete all as specified & as directed. 24/MIN/61SA/2022-23:2 31/SR/61SA/BLDG/2022-23:2 34/MIN/61SA/2022-23:9 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:4

M&L mild steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & as directed. 24/MIN/61SA/2022-23:50 31/SR/61SA/BLDG/2022-23:220 52/MIN/61SA/2022-23:50

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm bore pipe complete all as specified & as directed. 24/MIN/61SA/2022-23:1 34/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:2

Demolition of PCC in ground floors and pavings not exc 15cm thickness (below or above ground level ) complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3.2

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:1.3 51/MIN/61SA/2022-23:0.6 52/MIN/61SA/2022-23: 0.3

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:165 52/MIN/61SA/2022-23:35 51/MIN/61SA/2022-23:147

S&F light shade Vetrified Ceramic tiles edge cut 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) finished fair and even complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:90

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.18 sqm but not exc. 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) or tile addessive complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:20 34/MIN/61SA/2022-23:20 52/MIN/61SA/2022-23:20 51/MIN/61SA/2022-23:27

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:2

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:180 36/MIN/61SA/22-23:185

M&L for preparation of new plastered surfaces and applying two coats of Weather base paint of approved shade approved shade/tint over and incl 1mm thick wall care putty on walls complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:90 36/MIN/61SA/22-23:80

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:16 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23:2

All as per item No 98 above but area n exc 1.50 Sqm each complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:12

Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm each complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3

S & F Auto close hinges,stainless steel, bright finish or electrogalvanised fixed in repair complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:10 52/MIN/61SA/2022-23:30

M&L in repair 19mm thick WPC board in cabinate almirah cup board and partiation of cabinate, complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:16

S & F Width of flaps (when open) 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:33

S&F brass handle of 100mm size cast type, polished bright complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:14 52/MIN/61SA/2022-23:30

S & F 65mm Mortice latch with two levers (vertical Type), brass body and fixed in repair complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3

S&F Aluminium, anodised, barrel tower bolts 125mm long of extruded section and fixed complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:6

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:7

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:7

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into waterproof complete all as specified & as directed. (Note :- WPC @ 3% by weight of cement and measured separately). 31/SR/61SA/BLDG/2022-23:110

S&F in repair CP cast copper alloy bib taps two way with wall flange and areator fancy type of 15 mm bore quarter turn complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:2 52/MIN/61SA/2022-23:1

S&F in repair CP fancy Type center hole basin mixer 15mm bore cast copper alloy with 450 mm copper hose /braided hose without Popup waste system quarter turn and fixed in repaircomplete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 52/MIN/61SA/2022-23:1

S&F in repair CP wall Mixer with flange & 115 mm long bend pipe forover head shower non Telephonictype with connecting legs wall flanges and crutch etc quarter turn 15mm bore for mixing hot & cold water complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 52/MIN/61SA/2022-23:1

M&L Towel ring of brass CP Squar flange and fixed in repair complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:5

S&F in repair of Chromium plated Overhead Rain shower with relvoling joint and 115mmlong shower arm with wall flange 15 mm bore fancy type any colourcomplete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:5

S&F in repair of CP concealed stop Cock fancy type with long shank & cup cast copper alloy screwed down high pressure with crutch/butterfly handle screwed both end for iron pipe 15 mm bore complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3

S&F in repair of Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:9 52/MIN/61SA/2022-23:3 51/MIN/61SA/2022-23:6

S&F in repair of CP cast copper alloy bib taps Long body with wall flange fancy type of 15 mm bore quarter turn complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:3 27/MIN/61SA/2022-23:5

S&F in repair Counter top Vitreous China wash basin, coloured oval sape , size 550x400mm but including brackets, coupling and waste pipe fitted including granite counter slab of size 600mmx900mm complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3

S&F CP bottle trap with internal partition 32 mm size with 300 mm X 190 mm long wall connection pipe and wall flange for WHB fixed in repair complete all as specified & as directed. (Make-Make-CERA CAT PART NO CM 104 B or equivalent of MARC, JAQUAR or Equivalent as per Appx 'B') 31/SR/61SA/BLDG/2022-23:3

S&F in repair waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 52/MIN/61SA/2022-23:2

Dismantling of old U/S gratingand M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore 31/SR/61SA/BLDG/2022-23:25 34/MIN/61SA/2022-23:8

20 mm bore 31/SR/61SA/BLDG/2022-23:15 34/MIN/61SA/2022-23:5

25mm bore 31/SR/61SA/BLDG/2022-23:12

S&F Rotational moulded polyethylene water storage tanks 3 layer (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity including Dismantling of old water tanks (as applicable) complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:2

S&F in repair elegent mirror PVC cabinet with towel rail of size 475 x 600 x 150 mm complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 52/MIN/61SA/2022-23:1

M&L Soap dish brass CP fixed in repair complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:2

S&F in repair Stop valves 20 mm bore, . copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:1

S&F PVC (SWR) bends any radius 75mm dia complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 52/MIN/61SA/2022-23:5

S&F PVC (SWR) bends any radius 110mm dia complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 52/MIN/61SA/2022-23:5

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3

S&F bathroom Glass corner shelf of best quality (as per sample) complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:3 34/MIN/61SA/2022-23:2 52/MIN/61SA/2022-23:2

M&L for preparation of old plastered surfaces of wall and applying two coats of Oil bound distemper of approved shade/tint over and incl 1mm thick wall care putty on walls complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:55

M&L for preparation of old plastered surfaces wall and applying two coats of Weather base paint of approved shade approved shade/tint over and incl 1mm thick wall care putty on walls complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:200

M&L for two coats of white wash on old plastered surfaces of approved shade/tint on ceiling including preparation of surfaces complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:80

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23:12 52/MIN/61SA/2022-23:2 36/MIN/61SA/22-23:100 39/MIN/61SA/22-23:500

M&L for PCC 1:2:4 Type B-0 (12.50 mm graded aggregate stone aggregate for damp proof course, 40mm thick to horizontal or vertical surface including necessary formwork complete all as specified & as directed. 34/MIN/61SA/2022-23:5 27/MIN/61SA/2022-23:5

M&L RCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate complete all as specified & as directed. 34/MIN/61SA/2022-23:0.75

S&F Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. 34/MIN/61SA/2022-23:16

S&F Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. 34/MIN/61SA/2022-23:6

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & as directed. 34/MIN/61SA/2022-23:1.7

M&L preparation new plaster of surface and applying three coats of white wash on wall complete all as specified & as directed. 34/MIN/61SA/2022-23:25

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified & as directed. 34/MIN/61SA/2022-23:60

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, 100 mm bore sand cast pipe complete all as specified & as directed. 34/MIN/61SA/2022-23:4 27/MIN/61SA/2022-23:2

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,75mm bore sand cast pipe complete all as specified & as directed. 34/MIN/61SA/2022-23:4

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints,fix to wall,100mm bore sand cast pipe complete all as specified & as directed. 34/MIN/61SA/2022-23:1.5

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix on wall,75 mm bore sand cast pipe complete all as specified & as directed. 34/MIN/61SA/2022-23:1.5

S&F CI bend 100mm dia complete all as specified & as directed. 34/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:1

S&F CI bend 75mm dia complete all as specified & as directed. 34/MIN/61SA/2022-23:2

S&F CI 'T' junction 100mm dia single complete all as specified & as directed. 34/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:1

S&F CI 'T' junction 75mm dia single complete all as specified & as directed. 34/MIN/61SA/2022-23:2

S&F Cast iron soil cowl 100mm dia complete all as specified & as directed. 34/MIN/61SA/2022-23:2

S&F Cast Iron soil cowl 75 mm dia complete all as specified & as directed. 34/MIN/61SA/2022-23:1

M&LCast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75 mm dia complete all as specified & as directed. 34/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:5

M&L Salt-glazed stoneware gully traps, square or round mouthed, type `P',100x100mm complete all as specified & as directed. 34/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:5

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of concrete bedding complete all as specified & as directed. 34/MIN/61SA/2022-23:1

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including PVC Pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified & as directed. 34/MIN/61SA/2022-23:1

S&F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed - 15mm complete all as specified & as directed. 34/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:1

Supply & fixing Vitreous China valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve,float and handle including brackets capacity 10.0 ltr complete all as specified & as directed. 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1

S&F Figured glass, 4mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified & as directed. 34/MIN/61SA/2022-23:1.6

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. 34/MIN/61SA/2022-23:0.3

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, complete all as specified & as directed. 34/MIN/61SA/2022-23:8

M & L Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete, 50 cm thick complete all as specified & as directed. 34/MIN/61SA/2022-23:1.5

S&F in repair 32mm/40mm dia PVC waste pipe flexible type for WHB / kitchen 60cm long with union complete all as specified & as directed. 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23:4

S&F in repair Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified & as directed. 52/MIN/61SA/2022-23:1

S&F in repair plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified & as directed. 52/MIN/61SA/2022-23:1

M&L CP wall Mixer Telephonic Shower arrangment with connecting legs wall flanges and Telephonic shower crutch (Model Make-JAQUAR CAT PART NO CON 267KN or equivalent)) and telephonic hand shower single flow with self cleaning and flexible tube with hook 15mm bore for mixing hot & cold water screwed down for iron(Make-JAQUAR CAT PART NO ALD 577or equivalent) complete all as specified & as directed. 52/MIN/61SA/2022-23:1

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore.including taking down old branch pieces complete all as specified & as directed. 52/MIN/61SA/2022-23:20

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75mm bore.including taking down old branch pieces complete all as specified & as directed. 52/MIN/61SA/2022-23:20

M&L factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete specified in SSR Part-I all as specified & as directed. 52/MIN/61SA/2022-23:2.1 51/MIN/61SA/2022-23:4.2

M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate Set in CM(1:4) louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame complete and dismantling also to be including fixed in repair complete all as specified & as directed. 52/MIN/61SA/2022-23:120

Dismantling boarding plywood etc of any description and in any position fixed with nails etc complete all as specified & as directed. 52/MIN/61SA/2022-23:70

M&L 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutter,kitchen cabinet/ cup board /partition wall/ wall cabinet /WHB cabinet complete all as specified & as directed. 31/SR/61SA/BLDG/2022-23: 4.50 52/MIN/61SA/2022-23:70

S&F in repair sinks made of stainless steel 1mm thick matt finished kitchen or laboratory with plugs, washers and wastes, including waste coupling & waste pipe, bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 405 x 355 x 178 mm complete all as specified & as directed. Make: Bluestar Model No SSSB-06A or equivalent make as per Appx 'B'. 52/MIN/61SA/2022-23:3

Dismantling asbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering complete all as specified & as directed. 52/MIN/61SA/2022-23:10 39/MIN/61SA/22-23:165

S&F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with L-type or J-type or cranked hook bolts including bitumen washers etc. as in roof, walls etc complete all as specified & as directed. 52/MIN/61SA/2022-23:10 39/MIN/61SA/22-23:165

Supply and fixed in repair CP angle cock 15mm dia fancy type cast coper alloy complete all as specified & as directed. Make-Jaquar Cat. No. Con-053KN and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:6

Supply and fixed in repair CP WHB mixtuer cast coper alloy with central hole for WHB and long shank fancy type 15 mm bore complete all as specified & as directed. Make-Jaquar Cat. No. Con-167KNB and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:2

Supply and fixed in repair CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as specified & as directed. Make-JAQUAR CAT PART NO CON 267KN and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:2

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type long body complete all as specified & as directed. Make-Jaquar Con-107KN and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:2

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type two way Bib Cock complete all as specified and directed. Make-Jaquar Con-041KN, and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:2

S&F in repair CP overhead shower dia 110 mm round with revolving joints (with body rotation) & 115mm long arm shower with rabit cleaning system and all fittings complete all as specified & as directed. Make - Jaquar OHS-1709, and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:2

S&F in repair CP single towel rail 600 mm complete all as specified & as directed. Make : Jaquar-AKP-35711PS, and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:2

S & F in repair hand shower 105 mm dia round shape multi flow with air effect (ABS Body & Face Plate Chromium Plated) with rubit cleaning system and incl Easy flex tube in chromium finish 1.5 meter long with both end nuts complete all as specified & as directed. Make : Jaquar CAT Part No. HSH-1721, and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:2

S & F in repair Corner glass shelf (with bracket) complete all as specified & as directed. Make : Jaquar, CAT Part No ACN-1173 and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:6

M & L for 3-layer PP-R 20 mm dia Polypropylene rando copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking down old U/s GI Pipe complete all as specified & as directed. 51/MIN/61SA/2022-23:20

M & L for 3-layer PP-R 25 mm dia Polypropylene rando copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including taking down old U/s GI Pipe complete all as specified & as directed. 51/MIN/61SA/2022-23:20

S&F in repair white rimless Single piece-WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap, incl all neccessories items complete all as specified & as directed. Make : Jaquar, CAT Part No OPS-WHT-15853S300UF, and other equivalent make as per Appx 'B' 51/MIN/61SA/2022-23:2

S&F in repair counter top oval wash hand basin vitreous china white (flat back) of size 545 X 545 X 180 mmincluding all fittings complete all as specified & as directed. Make : Jaquar Cat No. CON -FSS-WHT-29601, Kohler Cat No. K-4126K-00 and Roca Cat part No. RS327875001 and Grohe 51/MIN/61SA/2022-23:2

S&F in repair CP grating 100mm dia round with or without waste hole fixed on floor/nahani trap fixed with cement complete all as specified & as directed. 51/MIN/61SA/2022-23:4 24/MIN/61SA/2022-23:2

S&F in repair CP grating 100mm dia round with or with waste hole fixed on floor/nahani trap fixed with cement complete all as specified & as directed. 51/MIN/61SA/2022-23:4

S&F aluminium sliding door bolt 200mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified & as directed. 51/MIN/61SA/2022-23:4

Cutting holes for inserting hold fast and making good to the disturbed portion with cement mortor 1:3 or PCC 1:3:6 exc half brick wall n. exc one brick wall complete all as specified & as directed. 51/MIN/61SA/2022-23:9

M&L for repair to built in dressing table fitted in OR Md Accn by providing material like looking mirror ,Knob, handles sliding rails, including making it complete serviceable by providing welding of any broken hinges and replacement of any part of dressing table ie replacement of wooden MDF Board etc and complete removal of existing treatment (Paint) and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified & as directed.

M&L 5mm thick Looking mirror 1500x300mm size fitted with wooden frame with screws 36/MIN/61SA/22-23:128

M&L 19 mm thick wooden cabnaite shutter/ Partitions MDF board in wood grain colour, half round edge fixed in repair 36/MIN/61SA/22-23:70

M & L 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished fixed in repair 36/MIN/61SA/22-23:256

S & F in repair Alu sliding channel for drawers etc 36/MIN/61SA/22-23:256

M & L applying two coat of synthetic enamel paint on wooden surfaces over 10cm width or girth over a coat of pink primer complete all as specified and directed by engineer in charge 36/MIN/61SA/22-23:800

Dismantling structural steel work including doors, gats framed trusses etc. 39/MIN/61SA/22-23:20

S&F mild steel screw bolts (Machine made) with hexagonal or square head at one end screwed the other end or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, length or bolt exc, 5 cm but not exc.10 cm long and diameter of neck 5 to 10 mm. 39/MIN/61SA/22-23:100

M&L mild steel Framed brackets of angles or tees with web and flanges cut to shape , drilled and counter sunk for screw, including bending and welding angles, as necessary , gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe-290 . Gde -E-165 (Brackets over 10 kg each to be measured under 'Structural steel) 39/MIN/61SA/22-23:1900

S&F expanded metal, not exceeding 4kg per Kg , cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified (1.63 mm thick @ 2.60kg/sqm) 39/MIN/61SA/22-23:1350

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor , multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, medium grade of suitable size (not less than 25mm dia) duly ISI marked with all accessories such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and sketch fittings etc) new MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green FRLS PVC insulation connected to common earth dolly complete all as specified and directed

(a) One light point controlled by one single pole one way 5 amps switch. 24/MIN/61SA/2022-23:6 31/SR/61SA/BLDG/2022-23:42 34/MIN/61SA/2022-23:12 52/MIN/61SA/2022-23:12 51/MIN/61SA/2022-23:12 27/MIN/61SA/2022-23:8

(b) One 3 pin 5 amps socket outlet on independent board controlled by one single pole 5 Amp switch 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:10 34/MIN/61SA/2022-23:4 52/MIN/61SA/2022-23:4 51/MIN/61SA/2022-23:4 27/MIN/61SA/2022-23:1

(c) One 3 pin 5 Amp socket outlet on same board with other switches. 31/SR/61SA/BLDG/2022-23:10 52/MIN/61SA/2022-23:4 51/MIN/61SA/2022-23:4 27/MIN/61SA/2022-23:1

All as per Item No 197 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 31/SR/61SA/BLDG/2022-23:4 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23:2

All as per Item No 197 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4.0 Sq mm PVC insulated copper conductor and 4.0 Sqmm copper conductor for continuous earthing complete. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:4 34/MIN/61SA/2022-23:3 52/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:2

Supply & Fixing Socket outlet 5 pin , 5/6 Amps flush type ISI marked. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:20 34/MIN/61SA/2022-23:3 52/MIN/61SA/2022-23:15 51/MIN/61SA/2022-23:15 27/MIN/61SA/2022-23:3

Supply & Fixing Socket outlet 5 pin , 15/16 Amps flush type ISI marked. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:4 34/MIN/61SA/2022-23:2 52/MIN/61SA/2022-23:6 51/MIN/61SA/2022-23:6 27/MIN/61SA/2022-23:2

S & F Switch piano flush type 5 amps, single pole one way duly ISI marked. 24/MIN/61SA/2022-23:7 31/SR/61SA/BLDG/2022-23:62 34/MIN/61SA/2022-23:17 52/MIN/61SA/2022-23:20 51/MIN/61SA/2022-23:20 27/MIN/61SA/2022-23:10

S & F Switch piano flush type 15 amps, single pole one way duly ISI marked. 24/MIN/61SA/2022-23:1 31/SR/61SA/BLDG/2022-23:4 34/MIN/61SA/2022-23:2 52/MIN/61SA/2022-23:6 51/MIN/61SA/2022-23:6 27/MIN/61SA/2022-23:2

S & F Bell push flush type 5 amps, single pole one way duly ISI marked. 31/SR/61SA/BLDG/2022-23:2 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23:2

S & F Ceiling rose surface type, bakelite 65 x 50mm, 2 to 3 terminals duly ISI marked. 24/MIN/61SA/2022-23:5 31/SR/61SA/BLDG/2022-23:38 34/MIN/61SA/2022-23:8 52/MIN/61SA/2022-23:12 51/MIN/61SA/2022-23:12 27/MIN/61SA/2022-23:8

S & F Lamp holder insulated body threaded dome pattern,suitable for bracket / batten fitting complete all as specified. 24/MIN/61SA/2022-23:1

Supply and Fixing wall mounting fan single phase 230 volt 400 mm sweep swing wall fan 5 star rating complete with all accessories . Make : Orient wall 47 or equivelant as per Appx 'B'. 24/MIN/61SA/2022-23:1

Supply & Fixing LED tube light fitting 20 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make : Philips : Astra line 20W or equivelant as per Appx 'B'. 24/MIN/61SA/2022-23:1

Supply & Fixing LED Bldg security light 30 watts,pressure die cast aluminium housing,heat resistane toughened glass with frame,IP 66 protection confarming towith including bracket (for housing street light fittings) made of GI pipe 40 mm dia light grade 1.20 mtrs long duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts,nuts,and washers complete all as specified and directed. Make : Crompton LSTS-30-CDL-M or equivelant as per Appx 'B'. 24/MIN/61SA/2022-23:3

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. 24/MIN/61SA/2022-23:2

S & F MCB single pole neutral 240 volts, 40 Amps, 10 KA complete all as specified. 24/MIN/61SA/2022-23:2 31/SR/61SA/BLDG/2022-23:2 34/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:1

S&F MCB single pole 240 volts, 40 Amps, 10 KA braking capacity complete all as specified. 24/MIN/61SA/2022-23:12

M&L for laying of bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified. 24/MIN/61SA/2022-23:1.2 13/REV/61SA/2022-23: 5.60

M & L Sand cushioning to PVC under ground cable with tibba sand and punning to provide a required cover. 24/MIN/61SA/2022-23:12.5 13/REV/61SA/2022-23:52

M & L Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls 10 sqmm, 2 core Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade complete sizes :- 24/MIN/61SA/2022-23:160

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) 24/MIN/61SA/2022-23:2

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc 31/SR/61SA/BLDG/2022-23:70 52/MIN/61SA/2022-23:24 51/MIN/61SA/2022-23:24

S&F electric Bell Ding Don AC 230volts single pole 31/SR/61SA/BLDG/2022-23:2 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23:2

Supply and fixing of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete 31/SR/61SA/BLDG/2022-23:4 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:1

Taking down exhaust fan of any size and capacity from site and Refixing the same exhaust with minor repairs incl greasing, oiling, clean etc complete all as specified and as directed 31/SR/61SA/BLDG/2022-23:2

Supply & fix LED light fitting 1x 20 watt Ac decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from ceiling rose complete. Make : Havells LED FIXT ELITE PRIDE Plus 20W or equivelant as per Appx 'B'. 31/SR/61SA/BLDG/2022-23:22 34/MIN/61SA/2022-23:6 52/MIN/61SA/2022-23:4 51/MIN/61SA/2022-23:4 27/MIN/61SA/2022-23:4

Supply & fix LED light fitting mirror type with high out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from cceiling rose complete. Make : Havells LHEXACP7IN1W010 or equivelant as per Appx 'B'. 31/SR/61SA/BLDG/2022-23:5 34/MIN/61SA/2022-23:2 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:2

Supply & fix LED Street light fitting 35 Watt 230 volt outdoor type with presurre die cast iron and heating resistant complete with lamp bracket with impact and corrosion resistance including thermal mangemanet in multiple optic complete with IIP/65/66 with three core copper connection from ceiling rose to fitting. Make : Havells 35W Endura citylite Platinum Plus or equivelant as per Appx 'B'. 31/SR/61SA/BLDG/2022-23:2 34/MIN/61SA/2022-23:4 27/MIN/61SA/2022-23:2

Supply and Bulk Head fitting 1 x 10 watt LED light driver Make : Wipro LW07-141-XXX-57-XX or equivelant as per Appx 'B'. 31/SR/61SA/BLDG/2022-23:2

S&F in repair factory made, sheet distribution boards, SP&N 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating including taking down of existing U/s DBs with MCBs :- 31/SR/61SA/BLDG/2022-23:2 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23:2

S&F rating 240v 10 KA C curve MCB of following poles and current carrying capacity in MCB DB complete with connection testing and commissioning

SP 5 to 32 amps 31/SR/61SA/BLDG/2022-23:18 34/MIN/61SA/2022-23:6 52/MIN/61SA/2022-23:12 51/MIN/61SA/2022-23:12 27/MIN/61SA/2022-23:4

SPN 40-63 amps 31/SR/61SA/BLDG/2022-23:2 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:1

M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit/ and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 6 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. Note : 2x6sqmm +1x6sqmm earth and one run of conduit suitable dia shall be measure one unit 31/SR/61SA/BLDG/2022-23:100 34/MIN/61SA/2022-23:105

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 25 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 5 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed by Engr-in-Charge . ( Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner). including taking down of existing u/s earthing (as applicable): 31/SR/61SA/BLDG/2022-23:2 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:1

Taking down US Geyser of any type and capacity and Refixing of the same geyser to site with minor repairs as applicable etc complete all as specified and as directed. 31/SR/61SA/BLDG/2022-23:2

Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt 31/SR/61SA/BLDG/2022-23:4 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:2 51/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:1

S&F Exhaust fan steel body AC single phase 230 V of size 450mm sweep heavy duty with blades and frame and louvers all as specified and directed 34/MIN/61SA/2022-23:1 27/MIN/61SA/2022-23:1

Supply & fix electric water heater storage type stell body with copper inner tank and heating element upto 2 KW capacity 25 litre BEE 5 star rate complete with all accessories such as safety valve thrmostate NRV connection pipe etc. 34/MIN/61SA/2022-23:1 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:2 27/MIN/61SA/2022-23:1

Supply and fixing of exhaust fan steel body AC single phase 230 v of size 300 sweep heavy duty with blades and frame and louver all as specified and directed. Make : Havells Turboforce SP 2N(1400 RPM) or equivelant as per Appx 'B'. 52/MIN/61SA/2022-23:1 51/MIN/61SA/2022-23:1

M & L Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. Note : 2x4sqmm +1x4sqmm earth and one run of conduit suitable dia shall be measure one unit length 52/MIN/61SA/2022-23:40 51/MIN/61SA/2022-23:75 27/MIN/61SA/2022-23:50

S&F in repair factory made, sheet distribution boards, SP&N 8 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating :- 27/MIN/61SA/2022-23:1

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade complete : 13/REV/61SA/2022-23:

16 Sqmm, 4 core

25 Sqmm, 4 core

35 Sqmm 3.50 Core

S&F heavy duty PVC insulated aluminium conductor 1100 Volts grade cable with inner sheathing of PVC tape and overall PVC sheathed in service connection three core stranded aluminium conductor of size 4 Sqmm ISI marked drawn through steel pole from junction box to street light fitting complete all as specified and as directed. 13/REV/61SA/2022-23:160

Supply & install steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410-SP-31 (9.00 meter long) including drilling holes and painting outside including 2 coat of aluminium paint over one coat of red oxide primer complete all as specified and as directed. 13/REV/61SA/2022-23:15

M&L for GI pipe bracket 40 mm bore double swan neck shape suitable to fix on top of tubular pole complete with nuts, bolts and washers complete all as specified and as directed. 13/REV/61SA/2022-23:15

Supply and fixing LED street light 100 W fitting comprising of pressure die cast aluminum housing with toughened glass of system, lumen efficiency> 90 lumen/watt complete with electronic driver for vibration proof performance having P.F.>0.95, operating voltage range 120 to 270 volts, THD< 10%, internal surge protection of 5 KV(in driver) and additional external surge arrestor of 10 KV for surge protection, driver protection-short circuit, open circuit, No-load, over load,EMI,CCT 5700 K and CRI> 70,IP 66, incl clamps, fastners complete all as specified and as directed. Make : Wipro LR02-112-XXX-57-92 or equivelant as per Appx 'B'. 13/REV/61SA/2022-23:30

Supply and lay tube GI of size 40 mm dia bore Light grade fixed on poles, walls and ceiling etc. with all fittings for protection of cable in repair (Clamps for fixing shall be measured and paid seperately) 13/REV/61SA/2022-23:50

Labour for boring under road/drain by manual/machine method for inserting GI tubing up to 80 mm dia for cable protection all as specified and directed by EIC. 13/REV/61SA/2022-23:50

S&F thermoplastic, polystyrene unbreakable junction box size 260x210x116 mm suitable for pole mounted outdoor type IP 65 insulated complete with FI clamps & nuts, bolts, washers and including terminal block heavy duty with phase seperators between R,Y,B terminals, one MCB SP 6 amp 10 kA,all duly fixed on din channel, cable glands for cable entry complete all as specified and directed. 13/REV/61SA/2022-23:15

M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping to poles including necessary form work as required complete all as specified and as directed. 13/REV/61SA/2022-23:1

MSR INFRATECH