Improvement n Renovation of Suite No 1

Amount

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground.For door/ window/ clerestory window.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 32 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of 12 mm thick plaster of Paris (gypsum anhydrous) ceiling reinforced withwire mesh to ceiling section all as per manufacture's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge.

Providing and applying plaster of paris putty of 4 mm thickness over plastered surface to prepare the surface even and smooth complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Teak Wood

Providing and fixing 12 mm thick commercial ply board with non decorative veneer on both side for wooden wall cladding of approved make and design as per direction of Engineer- in-charge complete.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick

Providing and fixing 18 mm thick commercial ply board with non decorative veneer on both side for wooden wall cladding of approved make and design as per direction of Engineer- in-charge complete.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with make of Godrej or equivalent with necessary screws etc. complete

Providing and fixing aluminium die cast body tubular type universal hydraulic pelmet door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :AR 300x10 mm

Providing and fixing bright finished stainless steel hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing bright finished stainless steel T in vertical grove of flush door shutter with necessary screws, pasting material etc. complete.

Providing and fixing teak wood lipping of size 32x10 mm in doors as per direction of engineer in-charge

Providing and fixing teak wood lipping of size 50x10 mm in front of wooden frames as per direction of engineer in-charge

Wall painting with premium acrylic emulsion paint ( dulux matt velvet ) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. two or more coats .

Providing Melamine polishing to wood work to give smooth & glossy finish as per direction of engineer-in-charge Two or more coats on new works including a coat of wood filler

Providing and fixing factory made uPVC window (Fenesta or equivalent ) of size 1.83mx1.46m with horizontal slider of uPVC System ,Mahogany Colour ,no bugscreen,no monsoon guard having mechanical joints ,plaster aperture finish ,black colour handle Non Locking with 8mmthick single glazing fixed to the frame as per manufactuer's specification and direction of engineer-in-charge.

Providing & fixing of 8mm thick wooden laminate flooring of approved make or brand( Pergo or equivalent) fixed to existing floor having uniclic tongue & groves complete as per direction of Engineer-in-charge

Providing and fixing glazing of 10 mm toughened glass in wooden door, window, shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in-charge .

Providing and fixing mirror of superior glass (of approved quality) andof required shape and size as per direction of engineer-in-charge

providing and fixing sun film of required colour , shape and design complete ae per direction of engineer in charge.

Providing and fixing drawer channel of hettich or equivalent make complete ae per direction of engineer in charge.

Providing and fixing soft close hinges of hettich or equivalent make complete ae per direction of engineer in charge.

Providing and fixing cupboard handles of two feet height complete ae per direction of engineer in charge.

Providing and fixing rollers for movement of sitting area of cupboard complete ae per direction of engineer in charge.

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):Flat surfaces

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing & fixing of G I Plane panel celing systme comprising of 84 mmx12.5 mm with 23.9 mm flange roll formed out of 0.50 mm thick GI power coated. Panel shall be polyester power coated with 50 micron polyester paint coating on front side. Panels are fixed on to roll formed carriers 32 mm widex39 mm deep out of 0.50 mm GI Sheet with cut- out to hold the panel in module of 100 mm at maximum 1.6 0 mtrs c/c without insulation and at maximum 1.5 mtr c/c with insulation. carriers shall be 50 micron black color power coating of polyester paint. carriesrs are suspended from the roof or truss by 4 mm dia galvanized steel wire rod hanger with special height adjustment suspension clip at maxmimum 1.3 mtr c/c. hangers are fixed to the roof by J hooks or ceiling brackets and nylone inserts. panels are factory cut in length to suit site dimensions or drawings. GI edge profile or wall angles are 24 mmx24 mm x0.4 mm thick and match the color of the panel complete as per direction of engineer -incharge.

Marine Line Enterprises

SATISH KUMAR