Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC 01 NEAR GOVERMENT HOSPITAL KOTHI BAZAR ROAD KOTHI SATNA MADHYA PRADESH 485666 | SATNA | MADHYA PRADESH | 485666 | L1 | Accepted-AOC being L1 bidder | |
| 2 | L2₹30.3 L+₹97,466 (3.33%)Rejected-Finance 282 SADAR BAZAR JHANSI 284001 | JHANSI | JHANSI | UTTAR PRADESH | 284001 | L2 | Rejected-Finance not become lowest bidder | |
| 3 | L3₹31.1 L+₹1.8 L (6.05%)Rejected-Finance 756 17 DADIYAPURA NANDU COLONY JHANSI 284001 | JHANSI | UTTAR PRADESH | 284001 | L3 | Rejected-Finance not become lowest bidder | |
| 4 | L4₹33.2 L+₹3.9 L (13.1%)Rejected-Finance 05 BABA PALACE MUSRIGHARARI JANDAHA ROAD MUSRIGHARARI SAMASTIPUR BIHAR 848101 | SAMASTIPUR | BIHAR | 848101 | L4 | Rejected-Finance not become lowest bidder | |
| 5 | L5₹34.7 L+₹5.4 L (18.4%)Rejected-Finance | L5 | Rejected-Finance not become lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
11 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sunny Kumar Attri
Garrison Engineer Jhansi
REPAIR/MAINT AND CERTAIN OTHER B/R WORKS AT VARIOUS BLDGS OF MH UNDER AGE B/R-I AT GE JHANSI
2024_MES_661171_1
GE/JHA/TOK/54 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE Jhansi
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
Yes
GE Jhansi
₹90,000
Yes
10 Sept 2024
21 Jun 2024
13 Jul 2024
21 Jun 2024
11 Jul 2024
5 Jul 2024
21 Jun 2024 - 4 Jul 2024
Amount
Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.
Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description, complete all as specified and directed.
S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.
S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.
M&L for 6mm thick non asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.
M&L for 6mm thick non asbestos cement, one piece plain angular ridge or two piece adjustable plain wing ridge orrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.
M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.
S&F of 40x 5 mm thick mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed.
M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L 4mm th Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equalflanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, duly fixed in ceiling frame work, incl dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.
M/L for non skid ceramic color tiles of size exc 0.18 sqm not exc 0.38 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.
M/L for non skid ceramic color tiles of size exc 0.11 sqm not exc 0.18 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.
M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed.
M&L screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed.
M&L for rendering 10 mm thick screed bed on fair faces of brickwork surfaces in CM 1:4 to receive wall finishes complete all as specified and as directed.
M & L for Mirror polish Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M & L for Mirror polish Machine cut kota stone 20-25mm thick in risers of steps ,skirting ,dados and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path surface, complete all as specified and as directed.
M&L 20mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.
M&L 20 mm thick Marble, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.
M&L for factory made PU coated, chequered cement concrete tiles of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as directed.
M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement with pigment made of PVC moulded (or rubber mould) with vibrating system, with , including in CM (1:3) in edges of pavers, complete all as specified and directed..
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc 6m mean radius built in cm (1:6), incl demolition of brick work old one complete all as specified and directed.
M&L for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair incl taking down old cement plaster complete all as specified and as directed.
M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair incl taking down old cement plaster complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:4, finished even and smooth without using extra cement incl taking down old cement plaster complete all as specified and as directed.
M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.
M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of ceiling, complete all as specified and as directed.
Dismantling water tanks RCC/ PVC any description upto 1000 litres complete all as specified and directed.
S&F 500 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valve complete all as specified in SSR Part I including disconnectiong/dismantling of existing tank.
S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I. including disconnectiong/dismantling of existing tank.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of exc. 250 litres & not exc. 500 litres capacity of tanks,Date of cleaning of tank will be marked on the tank of uniform & suitable Size of letters & numbers complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of 1000 litres capacity of tanks, Date of cleaning of tank will be marked on the tank of uniform & suitable Size of letters & numbers . complete all as specified and directed.
S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
Taking down eaves gutter and rain water pipes including all fittings any size and pattern complete all as specified and directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench complete all as specified and directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.
S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed.
S & F PVC Floor trap of 75 mm outlet with grating including jointing to waste pipe in cement solvent complete all as specified and directed.
S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP waste copling,including PTMT PVC connection 600mm complete all as specified and directed.
Supply and Fix in repairs 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, high level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long.flush pipe 32mm dia PVC complete all as specified and directed.
S&F in replacement of 1st quality vitreous china squatting pan (IWC) Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed.
Supply & Fix in repairs Vitreous China wash down water closet pan (pedestal pattern), EWC, coloured including jet system & matching coloured seat cover fixed complete all as specified and directed.
Providing and fixing Table Top white Vitreous China wash basin of specified size and model, 32mm CP brass waste coupling, C.P brass pillar cock 15mm size having long neck and Aerator, C.P brass bottle trap 32 mm size, extension pipes, wall flanges and concealed G.I clamps complete including granite, making necessary holes and other cutting in the counter top and fixing the wash basin, pillar cock rigidily including making good the walls wherever required all complete as per the architectural drawings and as directed by Engineer-in-Charge.
S&F in replacement ceramic One Piece Water Closet including slow falling seat cover and all necessary fittings of suitable size all as per as approved complete all as directed.
S&F in repair Vitreous China urinals ,half turn bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as directed.
S&F PTMT grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed.
S & F in repairs 15 mm bore Bib taps, cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore concealed type stop cock fancy type,chromium plated with long sank crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swirl type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed.
S&F in replair of waste coupling, chromium plated (half or full threaded), 32 mm dia size, complete all as specified and directed.
S&F in replair of sink coupling, chromium plated (half or full threaded), 40 mm dia size, complete all as specified and directed.
S&F in repair of PVC connection 450 x 15mm dia PTMT (PVC), complete all as specified and directed.
S&F in repair of towel rail 20mm dia 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as specified and directed.
S & F 15 mm bore Galvanized Steel tubes, medium grade fixed to walls and ceilings or laid in floors, concealed or open incl cutting of grooves incl taking down of old pipeline all as specified and directed
S & F 20 mm bore Galvanized Steel tubes, medium grade fixed to walls and ceilings or laid in floors, concealed or open incl cutting of grooves incl taking down old pipeline all as specified and directed
Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed.
All as per item here-in-above but not exc 1.5 sqm each
Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed.
Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed.
S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed.
M&L for second class hard wood. Plain, solid, straight chowkhats and frame, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixing, complete all as specified and directed.
M&L for 35mm thick second class hard wood glazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, conforming to IS-1003 Part-I & II; size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) complete all as specified and directed.
M&L for 35mm thick HW 2nd class Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm eneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
S&F 25mm thick flush shutter for cup board solid core construction with block board core and plywood face panels commercial type on both sides etc with and incl min 5 mm thick wooden beading fixed all around complete all as directed.
S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work, complete all as specified and directed.
S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood coloured PVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as specified and directed.
S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed
S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.
S&F of 150mm aluminum handle cast type anodized complete all specified and directed.
M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed.
M&L for mild steel hold fast and similar small articles conforming to Fe-290 Gde-165, complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) for bed block for fixing of chowkhats, complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed.
S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden beading as required, complete all as directed.
S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden beading as required, complete all as directed.
S&F in replacement of stainless steel wire cloth 0.63 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.
S&F powder coated aluminium slinding window with three track outer frame suitable for sliding aluminium shutters, weight of aluminium setion not less than 0.55Kg/M of three track frame, including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement , handle, aluminium grill of aperature size 50mm and 4mm dia etc complete all as specified.
M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed.
M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws etc, complete all as specified and directed.
M&L for powder coated aluminum window shutters, side hung type without sash bars, aluminium sections for frame weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 No), suitable handle (01 No), complete all as specified and directed.
M&L for powder coated aluminium wall partition, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc, complete all as specified and directed.
M&L for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed.
S&F mortice lock of size 100mm aluminium, 4 lever type, duly fixed in aluminium door, complete all as specified and directed.
S&F of glass, tinted type, 5.0 mm thick, each panes exc 0.5 sqm, suitable for aluminium / window/ Ventilators / door opening and similar work, complete all as specified and directed.
M&L Framed work (Fe 290, Gde E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc including hinges weld etc complete all as specified and directed .
S&F for Door stopper 140 mm of aluminium alloy body anodised with tongue of rubber bush at one end fixed to door complete all as specified and directed.
S&F 100 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F Solid PVC Wall Lining consisting of 5mm thickwood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing incl taking down old one complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
Dubey Construction Company (BID ID -3058063)
Yashoghan Construction (BID ID -3057802)
M/S BABA CONSTRUCTION (BID ID -3058059)
M/S PRAKASH RAIKWAR TRADERS AND CO (BID ID -3057992)
M/s Jagdish Chandra Arora (BID ID -3057229)
Shri Tirupati Associates (BID ID -3056935)
HARNAM SINGH ANIL SINGH (BID ID -3057712)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .