Work of complete renovation Labs (Ground Floor, First Floor and Second Floor) of BCA Block at Post Graduate Govt. College for Girls, Sector 11, Chandigarh.

Excavating trenches of required width for pipes,cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required,in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

pipes ,cable etc,not exceeding 80mm dia

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.11

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete size 600x300 mm

Providing and fixing pressed steel door frames confirming to IS:4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm,or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by EIC

Profile B

Fixing with adjustable lugs split end tail to each jamp

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

12 mm cement plaster of mix

1:4 (1 cement: 4 coarse sand)

6 mm cement plaster of mix :

1:3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete and preperation of surface with smooth finish complete in all respects and to the entire satisfaction of Engineer in Charge.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :

Old work (one or more coats)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete

Renewing glass panes, with Aluminium beading nails wherever necessary: based DSR No.14.6

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows, ventilators and clerestory windows (steel or wood) shutter including chow hats, architrave, holdfasts etc. complete and stacking within 50 metres lead

Of area 3 sq. metres and below

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Providing and fixing white vitreous china water closet squatting pan (Indian type)

Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing CP Brass jet with brass nozzal, steel flange and PVC flexible pipe 1/2" approx. 1 m length.

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.

10 litre (full flush) capacity-white

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

Providing and Fixing Soil, Waste and Vent Pipes

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and fixing heel rest sanitary bend

100 mm diameter :

Sand cast iron S&S as per IS - 3989

75 mm diameter :

Sand cast iron S&S as per IS - 3989

Providing and fixing single equal plain junction of required degree

Sand cast iron S&S as per IS - 3989

Sand cast iron S&S as per IS - 3989

Providing and fixing collar:

Sand cast iron S&S as per IS - 3989

Sand cast iron S&S as per IS - 3989

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : DSR 17.58

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete , including cost of cutting and making good the walls and floors :

100 mm inlet and 75 mm outlet

Sand cast iron S&S as per IS - 3989

Providing laying, jointing, fixing and testing G.I. pipe lines and specials tees bends, sockets, elbows etc. inside building and testing etc. complete including cutting, threading including cost of specials Internal work - Exposed on wall

20 mm dia nominal bore

25 mm dia nominal bore

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

25 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

20 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

20 mm dia nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions:

45 cm length

15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 18.46

20mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48

Providing and fixing of CP Extension Nipple DSR 18.53 A

Cutting holes up to 30x30 cm in walls including making good the same:DSR 18.76

With common burnt clay F.P.S. (non modular) bricks DSR 18.76.1

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc.and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design

100x100 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) SFRC with frame R.C.C. slab with 1:1.5:3 mix lean concrete 1:5:10 inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete in all respect

Inside dimensions 600x 850 mm and 45 cm deep

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Dismentling of Old glazed wall tiles including removal of malba from site complete.

Dismentling/Scraping of Plaster including removal of malba from site complete.

Providing and fixing ISI marked water proof 30 mm thick flush door shutter of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core ,fungus resistant,eco friendly with 1mm thick lamination on both side with phenol formaldehyde resin conforming to IS:848, complete including the cost of liping in all respect of approved make

Dismantling G.I. pipes /HCI (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

Providing and fixing of looking glass with PVC beeding 1/4" with plastic hard board or with studs complete in all respect of approved make

Providing and Fixing of CW Counter top WHB size 570x450mm with pressmatic tap make cera Comet including cost of CP waste complete in all respect

Extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing of chinaware wall mounted/wall hanging Eurpeon Style complete with cistern with soft close seat cover and Twin flush fitting, hinges, accessories of approved colour with all other fittings make and size as approved by EIC.

Providing and fixing in position best indian make soap dish fixed into wall with CP Brass screws and complete in all respect of approved make

Providing and fixing health faucet make Jaquar/Kohler/Grohe or same range

Providing and fixing soap dispenser Jaquar/Kohler/Grohe or same range

Providing and fixing wash basin mixture Jaquar/Kohler/Grohe or same range

Providing and P trap of approved make

Providing and fixing of vitreous chinal flat back half stall urinal complete with CP tube, spreader, CP Waste, clamps of approved make Jaquar/Kohler/Grohe or same range

Providing and fixing Urinal Valve Auto Closing System with built in control cock and wall flange complete in all respect of Jaquar/Kohler/Grohe or same range

Providing and fixing C.P. brass bib cock of Jaquar/Kohler/Grohe or same range

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of Jaquar/Kohler/Grohe or same range

15 mm nominal bore

Providing and fixing water cooler full body stainless steel SS 304 with non CFC hermeticaly sealed reciprocating/ rotary type compressor complete in all respect 380-400 of approved make

Providing and fixing Hi Flow water Filter-cum-Purifier Hi flow/ commercial type inculding installation charges 3 Ltr/Minute. Make Aqua Guard Kent/Usha/Brita/Pure-it.

Providing and fixing of Voltage Stablizers 5 KVA with copper winding input range 170-280 volts nominal output 230 Volts (± 10%) complete in all respect. Make: Deol, Jewel, V-Guard or Equivalent

Providing and fixing SS grab rail 32 mm of 304 grade steel complete in all respect

Providing and fixing S,S Long bend for OWC complete in all respect

Providing & fixing IRC encloser jali of mesh size 40 mm x 40 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangeent all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as desired by EIC

Please Enable Macros to View BoQ information