PROVN OF PCC/INTERLOCKING TILES AROUND THE MT SECTION AT INMAS AND INCREASING THE HEIGHT OF PERIMETER WALL ALONG THE WESTERN BOUNDARY OF CFEES UNDER GE I RND DELHI.

Amount

Excavation in over areas in hard/dense soil n.exc 1.5m deep and getting out complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for and all as specified and directed.

M&L 150mm thick (Compacted thickness) Wet Mix Macadam (WMM) (in two layers each layer of 75 mm thick compacted) with crushed stone aggregate of specified grade, spread using mechanical paver as specified, rolled & consolidated as specified to required gradient and camber complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation / mass concrete complete all as specified and directed.

M&L sand filling for hardstanding & interlocking tiles spread and levelled complete all as specified and directed.

M&L 400 micron thick polyethylene sheet laid on sand layer complete all as specified and as directed. Note: Sand shall be measured and paid separately.

M&L cement concrete work in pavement / hard standing of flexural strength 40 Kg/Sqcm in field using 400 kg of cement per Cum thickness of concrete 250 mm or less but not less than 150mm layer in bays and compacted with using vacuum dewatering system plant, floating operation with power floater, finishing the top surface of concrete even and smooth with application of power trowel including necessary formwork to sides and edges of concrete complete all as specified and as directed.

M&L for forming contraction (Dummy joints) 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `B' complete all as specified and directed.

M&L for forming construction joints 30mm deep x 10 mm wide filled with sealing compound grade 'B' complete all as specified and directed.

Finishing the surface of concrete roads pavement by brooming complete all as specified and directed.

Removing excavated soil exc 1.5 km and n.exc 5 km outside MOD land complete all as specified and directed.

M&L for 80 mm thick machine pressed precast concrete colour design PU coated interlocking paver block M-40 grade, any shape and size confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed.

M&L for providing cement concrete type B-1, 1:2:4 using 20 mm graded aggregate as in lintels cills steps, seismic and other similar bands, plinth course, string courses, lacing courses, parapets and railings upto 60cm in height copings, kneelers, apex stones bed plates, water troughs and the other like incl weathering slightly rounded or chamfered angles and throating complete as directed.

Excavation in trenches n exc 1.5m deep and n exc 1.5m wide & getting out in soft/loose soil complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortor 1:6. complete all as specified and directed.

M&L for rendering 15 mm thick mixed with WPC @ 3% by wt of cement or as per manufacturer's instruction finished the surface even & smooth without using extra cement on brick work complete all as specified and directed.

Supply only integral water proofing compound.

Taking down barbed wire including concertina coil complete all as specified and directed.

Dismantling structural steel work including doors, gates, angle post, but excluding framed truss etc. complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

S&F MS angle iron in fencing posts & struts including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws and including making holes in the sheets for passing of wind air, complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc.

M&L for preparation of old steel surface & apply one coat of synthetic enamel paint on angle iron fencing fixed on 3.0 to 3.5 mtr high RCC security wall over 10 cm in width or girth complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, on angle iron fencing fixed on 3.0 to 3.5 mtr high RCC security wall over 10 cm in width or girth complete all as specified and directed.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.

S&F of concertina coil fencing with punched tape, 980mm dia, 12-14m openable length having 56 turns per coil, having 50 Nos rounds per 6m length, including binding wire complete all as specified and directed. Make:-Rashtriya Ispat/Suraksha Industries/ Shakt Industries/Global Technocrafts Pvt Ltd

S&F 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, rafts & raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter, rough finished surfaces of concrete, complete all as specified and directed.

M&L for preparation of newly plasterd surface of wall and applying two coats of cement base paint of approved shade/tint over one coat of priming etc complete all as specified and directed.

Removal of demolished material with a lead of 5 km outside the MoD land complete all as specified and directed.

Excavation in hard/dense soil in post holes (or similar holes) in hard & dense soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing excavated material to low lying area from MoD land complete all as specified and directed.

M&L Cement concrete type B2 1:2:4 (40mm graded stone aggregate) in foundations, filling and mass-concrete in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

V.V CONSTRUCTIONS

cuckoo enterprises