Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹7.3 LAccepted-AOC SEETHA NILAYA MADYA SURATHKAL | DAKSHINA KANNADA | KARNATAKA | 574107 | L-1 | Accepted-AOC ACCEPTED BY THE CA SINCE THE BIDDER IS L-1 | |
| 2 | L-2₹7.4 L+₹9,634 (1.31%)Rejected-Finance | L-2 | Rejected-Finance NOT THE L-1 HENCE NOT ACCEPTED BY THE CA | |
| 3 | L-3₹7.6 L+₹28,658 (3.90%)Rejected-Finance | L-3 | Rejected-Finance NOT THE L-1 HENCE NOT ACCEPTED BY THE CA | |
| 4 | L-4₹7.9 L+₹55,040 (7.50%)Rejected-Finance | L-4 | Rejected-Finance NOT THE L-1 HENCE NOT ACCEPTED BY THE CA | |
| 5 | L-5₹7.9 L+₹58,780 (8.01%)Rejected-Finance | L-5 | Rejected-Finance NOT THE L-1 HENCE NOT ACCEPTED BY THE CA |
Tender Value
₹9.3 L
Closing Date
26 Jun 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
REGISTRAR, NITK
NITK, SRINIVASNAGAR POST, SURATHKAL-575025
Construction of new storage room and providing improvement works at Career Development Centre building in NITK
2024_NITK_812223_1
Tender No.05/2024-25/HD
Open Tender
Civil Works
Works
60 days
NITK, SURATHKAL
AS PER TENDER DOCUMENT
9 documents required · 9 mandatory
₹0
Exempted
11 Sept 2024
18 Jun 2024
27 Jun 2024
19 Jun 2024
26 Jun 2024
19 Jun 2024
Amount
Demolishing cement concrete: Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Demolishing R.C.C. work: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.
Dismantling Mosaic / ceramic tile: Dismantling Mosaic / ceramic tile work of any thickness in floors and roofs laid in cement mortar including, stacking material to the appropriate disposal of the debris with all lead (within the campus as directed) and lift etc., complete– in all the floor levels.
Dismantling plastering: Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge. – in all the floor levels
Repairs to existing aluminium partition/window/door : Repairs to existing aluminium partition/window/door including glass, board, lock, handle, beading etc cost of all material, labour, complete as per specifications and as per direction of the Engineer in charge – in all the floor levels
Taking out existing wooden door, window shutter: doors, windows and clerestory windows (steel or wood) shutter in any size including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in- charge
Removing of existing old or broken water closet Indian / European : Removing of existing old or broken water closet Indian / European and disposing it with all cost and conveyance labour for all items of work, HOM, with all lead and lift, loading and unloading, transportation charges and all the other incidental charges etc., complete as per specifications and direction of the Engineer in charge of the work – in all the floor levels
Dismantling of door / window(including frame): Dismantling doors, windows and clerestory windows (steel or wood) shutter in any size including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in- charge- in all the floor levels
PCC:1:3:6 :Providing and laying in position plain cement oncrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.- Mix 1:3:6 (M10) using 20mm nominal size graded crushed coarse aggregates.
Coursed rubble masonry : Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications
Filling available excavated earth: Filling available excavated earth (excluding rock) in sides of foundations up to plinth in layers of not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with all lead and lift including cost of all labours complete as per specifications.
Laterite masonry for Superstructure in CM 1:6: Providing and constructing laterite size stone masonry using clean sieved approved sand including cost and conveyance of all materials, curing charges etc complete as per specifications for Superstructure in CM 1:6
TMT steel reinforcement: Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately
RCC M – 20 (CC 1:1.5:3 ) for Beam/lintel: Providing and laying in position Reinforced cement concrete for all Super structures of building, super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, & formwork Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications and excluding cost of steel reinforcement.
MS Tubular truss, MS -plates, for roofing: Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
Pre-coated Galvanised iron profiled sheet: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per directions of the Engineer-in-Charge.
Pre coated Ridge plain: Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Flashing aprons( up to 600mm)
Precoated galvanised steel sheet Gutter: Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter
20mm thick cement plastering: Providing 20 mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
15mm thick cement plastering: Providing 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.- in 5th Floor
Vitrified tiles flooring: Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.
Ceramic tiles: Providing and laying Ceramic antiskid floor tiles of size 300x300mm or as approved by the Egineer In-charge (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete as per direction of Engineer in charge.- in all the floor levels
Glazed Wall tiles: Providing and fixing 1st quality ceramic glazed wall tiles 6mm thick conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in approved shades and size as approved by Engineer- in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. as per direction of Engineer in charge.
MS Grill: Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer of zinc chromate, cost of materials, fixtures, labour and HOM of machinery complete as per specifications.
UPVC WINDOWS: Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size – 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
Mathi/Nandi wood frames : Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.
Fully panelled Matti/Nandi wood shutters for doors: Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures )
Exterior emulsion paint: Providing and applying in two coats Apex Ultima emulsion paint of Asian make/ equivalent Nerolac/ Berger/ Nitco having anti-fungus and water resistance character, of approved colour and shade, over a base coat of apex primer painting/ equivalent primer including scraping the original surface and rubbing with sand paper of zero size, paints of approved colour, providing and removing scaffolding, cleaning of paint stains etc complete
Primer Coat wall surface: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge.
Acrylic emulsion paint – in two coats: Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
Synthetic enamel paint in two coats on new surface: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Asian /Nerolac/ Berger or equivalent Make
Applying priming coat wood surface: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications
Synthetic enamel paint in two coats on new surface: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Asian /Nerolac/ Berger or equivalent Make
Kitchen Cabinet : Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished laminate (1.5mm thick) and other side balancing lamination(preferably white) on factory pressed BWP grade marine ply as per IS 710 of approved brand . complete as per direction of engineer in-charge. Payment of providing and fixing auto closing hinges shall be paid separately)
Modular kitchen basket Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately )
304 grade soft closing hinges : Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with screws etc. complete as per directions of Engineer- in-charge.
Soft closing heavy type telescopic drawer channels Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.
Stainless steel 304 grade fancy handle: Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge.
Plastic emulsion painting for ceiling & walls without primer: Providing and applying painting in One coat with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac / Berger/ Sherwin Williams/ equivalent) on ceiling / Wall surface without primer to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications.
Factory made Rigid foam both side prelam panelled door shutter: Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer- in-charge fixed to frames with 3 nos of 75mm Stainless steel hinges.- with both side prelam shutters – in all the floor levels.
synthetic enamel paint -one coat on previously painted surface: Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of material and labour :One coat on old work as per specifications and as per directions of Engineer in charge. Asian /Nerolac/ Berger or equivalent Make – in all the floor levels
SS Angle cock – 15mm size: Providing and fixing SS angle cock for basin mixer and geyser points of approved quality conforming to IS:8931 – in all the floor levels
Bib cock- 15mm size with wall flange: Providing and fixing C.P. brass bib cock with wall flange of approved quality conforming to IS standards and weighing not less than 690 g.- in all the floor levles
Wash basin: Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a single 15mm C.P brass pillar tap, fixed with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, waste pipe, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11[Parryware / Hindware / Cera/ equivalent make
Vitreous china extended wall mounting water closet: Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
Floor mounted, white vitreous china single piece, double traps syphonic water closet: Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
Health Faucet with set: Providing and fixing JAQUAR/ARK/ equivalent other make Health Faucet with tube including cost of all materials, labour, transportation, taxes etc complete – in all the floor levels
Mirror: Providing and fixing bevelled mirror of superior glass of size 600 x 450mm (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing etc. complete in all respect as per directions of Engineer-in-Charge.: in all the floor levels
UPVC connection pipes 15mm dia: Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. - 15 mm nominal bore with 30cm length – in all the floor levels
CPVC plumbing pipes – 32 mm dia: KSRB: 13.86: Providing and fixing Chlorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc)- 32mm nominal dia pipes – in all the floor levels
CPVC plumbing pipes – 20 mm dia: KSRB: 13.86: Providing and fixing Chlorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc)- 20 mm nominal dia pipes – in all the floor levels
Ashoka Hegde
Ardi Santhosh Shetty
EKADANTHA CONSTRUCTION
T R N CONSTRUCTIONS
Harshitha
KOTIAN ENGINEERING CONSTRUCTION CONTRACTING
BHARATESH V KULAL
DSOUZA ELECTRICALS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .