GE/SMB/T-50/2025-26 REPAIR TO EXTERNAL PLASTER CHAJJA FLOORING TOILET BATH AND CONNECTED BR ITEMS IN ZONE I AT MIL STN SAMBA

Amount

M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing) and removing rubbish Out side Mod land, complete all as specified and directed.

Material and labour glazed ceramic coloured tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing) and removing rubbish Out side Mod land, complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing) and removing rubbish Out side Mod land, complete all as specified and directed.

Description all as item No 03 above but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing) and removing rubbish Out side Mod land, complete all as specified and directed.

M& L cement concrete as in sunken floor ,mass concrete type C-2 1:3:6 40 m graded stone aggregate including demolition of existing concrete in sunken floor of any description and in any position complete all as specified and directed.

M&L 40mm cement concrete type B-0 ,1:2:4 using 12.5 mm graded aggregate as in base / levelling course including demolition of existing PCC of any description complete all as specified and directed.

M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 (including reinforcement where ever required) and rendering 15mm thick including chicken wire mess as per site requirement in CM 1:3 without using extra cement finished even and fair complete all as specified and directed (Up to second storey bldgs and including necessory formwork and scaffolding and provision of minimum reinforcement required as per site condition also taking down or dismantling as required at site), complete all as specified and directed. Note: Reinfocement will be measured and paid separatly.

M&L Rendering 15 mm thick on fair faces of brick or concrete surface walls in cement mortar 1:4 ,( Upto 10 Mtr height including necessary scaffolding) rendering is to be finished even and fair without using extra cement with and including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

M&L Rendering cement plaster, 10 mm thick on fair faces of brick/concrete surfaces of wall in cement mortar 1:6 finished even and smooth w/o using extra cement including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

M&L Rendering 5 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

supply only Liquid water proofing compound complete all as specified and directed.

Preparation of new plastered/ concrete surfaces of walls and applying two coats of cement based paint over and including one coat of primer (up to 2nd storey with necessary/scaffolding) complete all as specified and directed.

Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty and one coat of primer complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and directed.

Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of cement base paint on walls, pillars, cornice etc (upto 2nd storey with necessary scaffolding complete all as specified and directed.

Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of oil bound distemper on walls, pillars,cornices surface including making good uneven surface/holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.

Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed.

M&L for RCC M-20, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,Including Demolition of reinforced cement concrete of any discription ground to 2nd floors and removing the rubbish from the work site out side defence premises complete all as specified and directed.

M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete, complete all as specified and directed.

M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified and directed.

M&L Marble work 16 to 18 mm thick green marble (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6.Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing) and removing rubbish Out side Mod land, complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.including all necessary fittings to join CPVC TO GI Pipes, FTA,MTA,bends,Tee etc including taking out old GI pipe with fitings complete all as specified and directed. Note:Rates are inclusive of Brass T,Brass Elbow ,MTA,FTA, for provision of sanitary /plumbing fittings where ever required complete all as specified and directed.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.including all necessary fittings to join CPVC TO GI Pipes, FTA,MTA,bends,Tee etc including taking out old GI pipe with fitings complete all as specified and directed. Note:Rates are inclusive of Brass T,Brass Elbow ,MTA,FTA, for provision of sanitary /plumbing fittings where ever required all as directed.

S&F in repair 15 mm Bib taps,chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ,complete all as specified and directed.

S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair 15mm bore stop valve fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore fancy type wall mixer 3 in 1 including bend pipe for overhead shower ( mixing hot & cold ) and fixed complete all as specified and directed.

S&F in repair brass Chromium plated shower roses 125 mm size with or without swivel joints, any size, including shower arm (not less than 195 mm long) and fixing to steel pipe or union, complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repair 10 litres Capacity PVC valveless,syphonic action type,flushing cistern,low level,white with inlet,ball valve,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing only in repairs of High or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any, complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 25 mm bore pipe, including making connections including tank nipple to all incoming and outgoing pipes of siutable dia Dismantling water tanks and removing to store of water storage tanks (Cap. 250 ltr to 500 ltr ) complete all as specified and directed.

Supply and fixing fixed in repairs Gun-metal, globe or gate valves, (with half turn) ,screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and directed.

S&F in repair 25 mm CPVC Tank Adaptor for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms 25mm- 65gms, complete all as specified and directed.

S&F in repair 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms) complete all as specied and directed.

S&F in repair 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, connection to drain/ trap (out going pipes ) and to flushing pipe complete all as specified and directed.

S & F in repair plastic water closet seat cover (closed pattern) with PVC Hinging device for pedastal pans complete all as specified and directed.

S & F in repair vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repair Vitreous China, wash basin white, flat back , size 400mmx300 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass, complete all as specified and directed.

Supply and fixing in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site complete all as specified and directed.

Supply and fixing in repair Cast Iron soil waste and vent pipes 100 mm bore single socketed in any length with or without ears, with cement joints, laid in trenches or in floors,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site complete all as specified and directed.

Supply and fixing in repair Cast Iron soil waste and vent pipes 75 mm bore single socketed in any length with or without ears, with cement joints, laid in trenches or in floors,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site complete all as specified and directed.

Supply and fixing in repair Cast Iron soil waste and vent pipes 100 mm bore single socketed in any length with or without ears, with cement joints, fixed to wall ,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site complete all as specified and directed.

Supply and fixing in repair Cast Iron soil waste and vent pipes 75 mm bore single socketed in any length with or without ears, with cement joints, fixed to wall ,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site complete all as specified and directed.

Supply and fixing, in repair Cast Iron , bends any radius , diminishing pices or tapers (larger bore measured) 75 mm bore , complete all as specified and directed.

Supply and fixing, in repair Cast Iron , bends any radius , diminishing pices or tapers (larger bore measured) 100 mm bore , complete all as specified and directed.

Supply and fixing, in repair Cast Iron , bends any radius , diminishing pices or tapers (larger bore measured) with access door any radius 75 mm bore , complete all as specified and directed.

Supply and fixing, in repair Cast Iron , bends any radius , diminishing pices or tapers (larger bore measured) with access door any radius 100 mm bore , complete all as specified and directed.

Supply and fixing, in repair cast Iron branch piece single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branches with access door equal or unequal for 100 mm bore , complete all as specified and directed.

Supply and fixing, in repair cast Iron branch piece single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branches with access door equal or unequal for 75 mm bore , complete all as specified and directed.

Supply and fixing, in repair cast iron 'P’ trap for 100 mm bore including dismantling of exixting trap, complete all as specified and directed.

Supply and fixing in repairCast Iron floor trap 75 mm dia plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 including Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick or concrete surface walls in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick or concrete surface walls in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

Note:- The contract sum shall be arrived at after deduction of amount of Sch of credit.

SIDDAHANT ENTERPRISES (BID ID -3353377)