Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.9 L+₹5,320.10 (0.17%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L2 | Rejected-Finance Highest bid quoted other then L1 | |
| 3 | L3₹32.0 L+₹1.2 L (3.86%)Rejected-Finance RM 01 RIDHISIDHI I SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹63,830
Closing Date
8 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri Ganganagar Cantt Rajasthan-335001
SPL REP TO BLDG, MW AND RW AT MILITARY STATION SRI GANGANAGAR
2022_MES_562379_1
GE SGNR/TOK-50 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Sri Ganganagar(Raj)
D Class a(i) and for un-enlisted, refer NIT para 8.
6 documents required · 6 mandatory
₹500
GE Sri Ganganagar
₹63,830
Yes
17 Jan 2023
10 Nov 2022
10 Dec 2022
10 Nov 2022
8 Dec 2022
25 Nov 2022
Amount
Excavation in trenches, not exc. 1.50 mtr wide and not exc 1.50 mtr in depth and getting out in soft / loose soil for foundations etc complete all as specified and directed by Engineer-in-Charge.
M & L PCC (1:4:8) type D-2 ( using 40mm crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
Return filling including spreding levelling watering and well ramming in layers not exc 25 cm. complete all as specified and directed by Engineer-in-Charge.
Removing excavated material soil not exc. 50 mtr and depositing where directed at a level n. exc. 1.50 mtr above the starting point complete all as specified and directed by Engineer-in-Charge.
Form work in flat surfaces in rough finish to sides of concrete foundations, footings, bases of columns, raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed by Engineer-in-Charge.
M&L RCC M-25 design mix using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams, plinth beams, base for columns, etc basements slabs under rammed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.
Formwork to sides of pillars Square, Circular, rectangular on plan or polygonal posts, struts, piers, columns and stanchions complete all as specified and directed by Engineer-in-Charge.
M&L RCC M-25 design mix using 20 mm graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge.
Form work for rough finished flat surface of concrete to roof beams, beam haunching, girders, lintals etc. also splays between floors and beem, etc complete all as specified and directed by Engineer-in-Charge.
M&L RCC M-25 design mix using 20 mm graded aggregate as in Beams cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed by Engineer-in-Charge.
Formwork to soffits of suspended slabs such as roof slabs,floor slabs thickness n. exc. 200 mm in fair finish complete all as specified and directed by Engineer-in-Charge.
Formwork to edges of concrete flats and similar works thickness n. exc. 200 mm in rough finish complete all as specified and directed by Engineer-in-Charge.
M&L RCC M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified and directed by Engineer-in-Charge.
S & F TMT bars 10mm dia and over cut to length bent to shape required , including cranking , bending spirally for hoping for columns , hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge.
Ditto as item no. 14 but 5mm dia and over upto and including10mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles complete all as specified and directed by Engineer-in-Charge.
Brick work with sub class `B` old size bricks straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
Ditto as per description of item No. 17 above but except bricks complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge.
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cm 1:4 finished even and smooth (without using extra cement). complete all as specified and directed by Engineer-in-Charge.
M&L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cm 1:6 finished even and smooth (without using extra cement). complete all as specified and directed by Engineer-in-Charge.
M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over 3 mm thick wall putty over one coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newly plastered surface of wall any description and applying two coats of oil emulsion distemper over over 3 mm thick wall putty over a coat of chalk whiting layer on plastered surfaces preparatory to distempering complete all as specified and directed by Engineer-in-Charge.
M & L for three coats of white washing on new plastered surfaces of on ceiling surface including preparation of surface complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection,hard standing finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for 75 mm thick plain Cement concrete (M-10)1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed by Engineer-in-Charge.
M&L 25 mm thick PCC flooring 1:2:4 type B-1 (20 mm graded agg) for receiving floor finish tiles etc. complete all as specified and directed by Engineer-in-Charge.
M&L for earth filling, spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge.
M&L for 150 mm thick Hardcore of brocken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.
M&L light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over screed bed or bedding layer of mortar 15 mm thick (1:6) for laying floor finishes complete all as specified and directed by Engineer-in-Charge.
M&L for coloured glazed tiles size 600x300x7 mm thick fixed with neat cement slurry on vertical surface to wall pointing in white/coloured cement to match and including 10mm thick plastering in CM 1:4 rough finished to receive tiles complete all as specified and directed by Engineer-in-Charge.
Plain cement concrete bed 1:4:8 type D-2 (using 40mm graded crushed stone aggregates)to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm bore pipe, complete all as specified and directed by Engineer-in-Charge.
Salt glazed stone ware drain pipe of 150mm bore (internal bore) garde 'A' laid in trenches and jointed, complete all as specified and directed by Engineer-in-Charge.
Salt glazed stoneware bends and taper bends, of 150mm bore complete all as specified and directed by Engineer-in-Charge.
S& F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.
S& F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-Charge.
S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars,aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100 mm long (2 Nos) suitable handle (2 Nos) and 150 mm long barrel tower bolts (2 Nos) complete all as specified and directed by Engineer-in-Charge.
S&F Anodised aluminum grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 ) of approved design /pattern, with approved standard section and fixed to the window /door with C.P brass/SS screw @ 200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles. Note:- Design shall be approved by Engineer - in - Charge. Note :- Minimum thickness of powder coating shall not be less than 50 micron.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
S&F aluminium 4 lever Mortice lock , vertical type, size 100 mm complete all as specified and directed by Engineer-in-Charge.
S&F Grating square 150mm size of PTMT(Minimum weight 50 gms) complete all as specified and directed by Engineer-in-Charge.
M&L PVC SWR floor trap, with grating including joining to waste pipe fixed in cement concrete type B-1 (1:2:4) 75mm dia complete all as specified and directed by Engineer-in-Charge.
S&F 15mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F 20mm tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F Vetrious china wash down water closet (385x645x815 mm) rimless bowl with cistern for Coupled WC with UF soft close slim seat cover, hinges, fixing accessories, P trap including cistern fittings, complete all as specified and directed by Engineer-in-Charge.
S&F for Vitreous china counter top wash hand basin, white flat, size 600 x450 x 4600 mm incl brackets waste coupling, waste pipe and vaniety storage cabinet , complete all as specified and directed by Engineer-in-Charge.
S&F Swivel Towel Holder twin type complete all as specified and directed by Engineer-in-Charge.
S&F soap dish polycarbide complete all as specified and directed by Engineer-in-Charge.
S&F Health faucet with 8mm dia ,1.2 mtr long flexible tube & wall Hook, complete all as specified and directed by Engineer-in-Charge.
S&F Opal Prime built in bathtub complete all as specified and directed by Engineer-in-Charge.
S&F Corner Glass Shelf of size 225 x 225 mm, complete all as specified and directed by Engineer-in-Charge.
S&F overhead Shower dia 120mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified and directed by Engineer-in-Charge.
S&F Looking Mirror rectangular/square shaped of size 560x864 mm mat finished silver coated glass bathroom complete all as specified and directed by Engineer-in-Charge.
S & F 15mm dia central hole basin mixer, complete all as specified and directed by Engineer-in-Charge.
S & F 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.
M&L angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia complete all as specified and directed by Engineer-in-Charge.
M&L angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated with long shank and cap ( concealed type ) 15 mm dia complete all as specified and directed by Engineer-in-Charge.
S&F Gate/stop valves 20 mm bore , cast copper alloy screwed down high pressure with butterfly handle screwed both ends for iron pipe. complete all as specified and directed by Engineer-in-Charge.
S&F Gate/stop valves 15 mm bore , cast copper alloy screwed down high pressure with butterfly handle screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.
S&F 110mm dia PVC(SWR) junction single, (single T) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge.
S&F 110mmPVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.
S & F PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.
S & F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge.
S&F 75 mm PVC bends (any radius) fitted complete all as specified and directed by Engineer-in-Charge.
S/F 75 mm dia PVC cowls complete all as specified and directed by Engineer-in-Charge.
PVC floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and directed by Engineer-in-Charge.
M&L PVC gully trap125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
M&L PCC 1:2:4 type B-1(Using 20mm graded crushed stone agg) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed by Engineer-in-Charge.
S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified in SSR Part I including disconnectiong of existing tank and removing to store, complete all as specified and directed by Engineer-in-Charge.
S & F 12 mm thick Toughned glass as in hinged doors, partitions automatic doors/partition wall and similar work including cutting to shape, drilling holes required complete all as specified and directed by Engineer-in-Charge.
M& L Brick work with fly ash old size bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for Anti termite Treatement to the bottom and sides of excavation at the rate of 5 liters of emulsion per square metere of surface area complete all as specified and directed by Engineer-in-Charge.
M&L for Anti termite Treatement the top surface of filled earth at the rate of 5 liters of emulsion per square metere of surface area complete all as specified and directed by Engineer-in-Charge.
M&L for Anti termite Treatement reating the soil under plinth protection at the rate of 5 liters of emulsion per square metere of surface area complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete type B1, 1:2:4 20 mm (20 mm aggregate) in roof kerbs or mud stops, rounded or chamfered on edges Providing, cement concrete in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge.
M&L for Machine cut Kota stone slab flooring 18-20mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror, polishing including 15mm of screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for Machine cut Kota stone slab as in vertical surfaces such as risers of steps 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror, polishing also moulding edges including 10mm of backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L pressed steel frame for door size 125x60mm with one or more rebates inclding necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engineer-in-Charge.
M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete all as specified and directed by Engineer-in-Charge.
M&L for 35mm thick second calls hard wood plain framed panelled shutters (two number of panells) with lock rail and panel of 9mm BWP commercial ply or 12mm veneerd particle board with commercial veneering on both faces. The size of rail and sstile as per IS:1003 (Part1), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.
M&L two coats of synthetic enamel paint over a coat of red oxide primer on steel surface over 10 cm width or girth, on new steel surface not otherwise described including preparation of new surface. complete all as specified and directed by Engineer-in-Charge.
M&Lfor preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.
S&F Steel windows with side hung shutters including proecting type hinges with steel handle 02 Nos barrel Tower Bolt and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.
S&F 10mm dia M S round guard fbars for steel windows complete all as specified and directed by Engineer-in-Charge.
S&F MS falt iron 25x6mm as in hodl fast confirming to Fe290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.
S&F 4 mm sheet glass, ordinary quality and galszing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-Charge.
S & F aluminium anodized barrel tower bolts of extruded section 300 complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium handle cast typ anodized 150 mm long complete all as specified and directed by Engineer-in-Charge.
S&F 300 mm aluminium sliding door bold with hasp & staple (bolt type) and fixing clip of sheets cast or extruded section and fixing bolt and sliding bolt of extruded section complete all as specified and directed by Engineer-in-Charge.
S&F of prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
S&F of prepainented Pre-painted galvalume aluminium zicnc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
M&L mild steel work as post and hollow square/rectangular tubular truss including special shapped washer including iron cleats etc complete using ERW or induction butt weld tube confiring to IS1161-1998 grade ste-240 complete all as specified and directed by Engineer-in-Charge.
M&L mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be filled with washer and one hexagonal or square but not exc 5cm long and diameter of neck 11mm to 15mm complete all as specified and directed by Engineer-in-Charge.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engineer-in-Charge.
M&L 450x300x7 mm thick glazed ceremic coloured tiles as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including 10mm backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete in ground floors and paving not exc 15 cm thickness (below or above GL) complete all as specified and directed by Engineer-in-Charge
Taking down chowkhats or frames with shutter /window (without taking off shutter from the frame) not exc 1.5 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames without taking off shutters exc. 1.5 sqm but n exc 4 sqm each complete all as specified and directed by Engineer-in-Charge.
S&F for factory made solid panel PVC Door shutter/Cup board shutter 30 mm thick (style) consisting of frame made out of M.s. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
S&F PVC solid door fame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification and drawing in SSR Part-II. Fixed to wall with screw and rawal plug etc complete all as specified and directed by Engineer-in-Charge.
Taking down iron chowkhats or frames with shutter /window/ventilators (without takingoff shutter from the frames) not exc 1.5 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture and fixed with aluminium wire staples complete all as specified and directed by Engineer - in - Charge.
S&F butt hinges of size 125 mm medium weight, cold rolled mild steel complete all as specified complete all as specified and directed by Engineer-in-Charge.
S&F 200 alminium anodies barrel tower bolts of extruded sction complete all as specified and directed by Engineer - in - Charge.
S&F 150mm extruded aluminium alloy handles fabricated type anodised complete all as specified and directed by Engineer - in - Charge.
S&F 250 mm mild steel sliding door bolts, clip type, stone enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, 4 on bolt plate and 2 on staple plate complete all as specified and directed by Engineer-in-Charge.
Taking up or down 20 mm dia Steel tubing & connections including cleaning for refining or reoval to store complete all as specified and directed by Engineer - in - Charge.
Ditto as per item No. 47 but fixing only. complete all as specified and directed by Engineer - in - Charge.
Taking up or down 15 mm dia Steel tubing & connections including cleaning for refining or reoval to store complete all as specified and directed by Engineer - in - Charge.
Ditto as per item No. 46 but fixing only. complete all as specified and directed by Engineer - in - Charge.
S&F in replacement 15mm Stop Valves cast copoper ally screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe or four unions, fancy type chromuim plated with long shank and cup (concealed type) and fixed complete all as specified and directed by Engineer - in - Charge.
S&F in repairs 20mm Stop Valves cast copoper alloy with crutch or butterfly handles screwed down high pressure screwed both ends for iron and fixed complete all as specified and directed by Engineer - in - Charge.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper aloy with capstan head, chromium plated, screwed down hight pressure with or without letter "Hot or cold" with long screwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450 mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete all as specified and directed by Engineer-in-Charge.
S&F 15mm bore PVC connections, with PTMT nuts, of length 450mm complete all as specified and directed by Engineer - in - Charge
S&F 15mm bore PVC connections, with PTMT nuts, of length 600mm complete all as specified and directed by Engineer - in - Charge
S&F in repairs15mm bib taps cast copper alloy, with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer - in - Charge
S&F in repairs CP shower rose with or w/o swivel joints, any size including fixing to steel pipe or union fixed in repair complete all as specified and directed by Engineer - in - Charge
S&F CP towel tubular towel rail 20mm dia D type, 60 cm Long between flanges. complete all as specified and directed by Engineer - in - Charge
S&F in repairs water closet vitreous china squatting pan (Orissa pattern) size 580x440mm white with integral foot rests, including provision of lime concreete bedding with 'P' trap, and connection to drain and to flushing pipe antiy syphonage pipe (excluding flushing cistern) complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC valveless symphonic action type flushing cistern low level white with inlet ball valve float and handle 10 ltr capacity including brackets complete all as specified and directed by Engineer-in-Charge.
S&F Shelf of PTMT fixed with and including CP brass screws and wooden/plastic cleats (minimum weight 300 gms) complete all as specified and directed by Engineer-in-Charge.
S&F in repair soap dish, 100mm dia round or oval fixed to walls or dados complete all as specified and directed by Engineer - in - Charge
S&F PVC (SWR) Vent cowl 110 mm bore complete all as specified and directed by Engineer - in - Charge
M&L for concrete bed to drain pipes for 100 mm boreincluding packing under and haunching against the sides of pipes after they are complete all as specified and directed by Engineer - in - Charge
M&L for concrete bed to drain pipes for 150 mm boreincluding packing under and haunching against the sides of pipes after they are complete all as specified and directed by Engineer - in - Charge
Salt glazed stone ware drain pipe of 100mm bore (internal bore) garde 'A' laid on concrete bed to requried slope, jointed and tested complete all as specified and directed by Engineer-in-Charge. (concrete bed shall be measured and paid for separately)
Salt glazed stone ware drain pipe of 150mm bore (internal bore) garde 'A' laid on concrete bed to requried slope, jointed and tested complete all as specified and directed by Engineer-in-Charge. (concrete bed shall be measured and paid for separately)
Demolition of concrete of any description and in any positin not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge
M&L pre-cast cover slab for manholes type B1 (1:2:4) using 20mm graded aggregate complete all as specified and directed by Engineer-in-Charge
M&L cutting for 150mm pipe into existing manhole for connecting new drawin making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 typ B-1 smooth finished and reforming benching as required complete all as specified and directed by Engineer-in-Charge
S&F in repair for vitreous China bowl urinals,half stall type (minimum) with grating and union for dischage pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threader PTMT waste coupling and 32 mm dia wae pipe and pointing around urinal back in cement mortar, including urinal spreader of POTMT suitable for fixing with 15mm dia pipe and including push tap high pressure of PTMT screwed dor iron pipe 15 mm bore (minimum weight 47 gms) complete all as specified and directed by Engineer - in - Charge
M&L for urinal partitions slabs terminating about 40cm above floor line complete all as specified and directed by Engineer-in-Charge
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment as in floor complete all as specified and directed by Engineer-in-Charge
M&L sand cushioning 25mm thick laying in floor finished even and fair to receive tile all as specified complete all as specified and directed by Engineer-in-Charge
M&L PCC (1:2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tiles.complete all as specified and directed by Engineer-in-Charge.
Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50 M and making good surface complete all as specified and directed by Engineer - in - Charge.
M&L PCC (1:2:4) type B-2 using 40mm graded stone agregete in foundation of posts and struts complete all as specified and directed by Engineer-in-Charge.
M&L Rolled mild steel in roof trusses (framed) trussed purlins crane gantries rails and fastering and heavy bracket framing (Beam, tee, angle, channel or flate sections) including distance pieces, cleats ect conforming to Fe-290 grade E-165 complete all as specified and directed by Engineer-in-Charge.
M&L mild steel work as in framed work i.e. Angle iron/flat iron including caps, bases, splices all lattice fbars, cutting tops to shape, drilling holes notching for wire etc confirming to Fe-290 grade E-165 complete all as specified and directed by Engineer-in-Charge.
S&F Mangalore tile profile Pre-painted galvaliume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.complete all as specified and directed by Engineer-in-Charge.
S&F Mangalore tile profile Pre-painted galvaliume aluminium zinc coating GI based plain steel sheet 0.50 mm thick for Ridge of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.complete all as specified and directed by Engineer-in-Charge.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.
M & L for concealed conduit point wiring complete for light/fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and 3.0 mm thickness for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge. (Make of cable - Finolex/Havells/Anchor and conduit pipe:-AKG/Plaza/Finolex) Note : Thickness of sunken box not less than 2.0 mm minimum
All as per Srl item No -147 here in before but for one socket outlet 3 pin 15 Amps on independent board with 2.5 Sqmm copper cable complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No -147 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No -148 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge. (Make of cable - Finolex/Havells/Anchor))
All as per Srl item No -148 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge. (Make of cable - Finolex/Havells/Anchor)
All as per Srl item No. 148 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge. (Make of cable - Finolex/Havells/Anchor)
S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 5 pin, type 5/6 Amps 5 in 1 flush type complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 6 pin, type 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F ceiling rose surface bakelite three terminals complete all as pecified and directed by Engineer - in - Charge.
S & F in replacement of existing light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge. (Make:Havells cat part No: LUMILINEPLUSBS20WLED865SPCSS, Bajaj cat part no.: BCLSBAL 20W CW ,Crompton cat part no. : CCS-100-20-65-HL2-DP-NWH)
S & F in replacement security light fitting LED TYPE 25 watt with all necessary acessories, clear transparent acrylic cover, prewire suitable to operated on 230 vold 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore "light grade" brackets 2 mtr length bent to shape to obtained required shape including clamps, nut / bolts/ washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - charge (Make : Havells cat part no:ENDURAPEARLSL25WLED757SASYTOPCMP, Bajaj cat part no. BRLEP 25W LED WH, Crompton cat part no. LSTS-25CDL-M)
S & F Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery with electronic driver (new style), glass well, and including 10 watt LED lamp all as specified and directed by Engineer - in - Charge (Make:Havells cat part no : HEXAFT10WLED857SSYMBOPC, Bajaj cat part no. BIBWP 10W LED, Crompton cat part no. LBHP-10-CDL)
S & F in replacement compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge. (Make : Havells cat part no LUMILINEPLUSBS10WLED865SPCSS, Bajaj cat part no. BCLSB 10 WH, Crompton cat part no. LDL-10-CDL)
S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.
S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.
S&F in repairs Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting SP & N 8 Ways, 240 Volt ISI marked 200Amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and Isolators complete all as specified and directedby engineer -in-charge.
S&F in repairs Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting SP & N 4 Ways, 240 Volt ISI marked 200Amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and Isolators complete all as specified and directedby engineer -in-charge.
S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate No.3 of SSR Part I and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge
S&F metal body exhaust fan heavy duty of 300mm sweep 900 RPM, 240 volt complete with louvers and shutter and mounted in suitable opeing arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1:4) white washing matching with existeing colour etc. complete all as specified and directed by Engineer-in-Charge.
Supply laying jointinig testing and commissioning of cable XLPE insulated screened PVC bendded, galvanized steel strip or wire armored electric power cables (heavy duty) 1100 Volts grade with multistranded aluminium conductor of size 16 sq mm 2 core laid in trenches /ducts/fixed on poles/walls laid under road, paths, drains/culversts or passing through pipes complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches, not exc. 1.50 mtr wide and not exc 1.50 mtr in depth for laying of cables complete all as specified and directed by Engineer-in-Charge.
Supply and filling in Sand for cable protection complete all as specified and directed by Engineer-in-Charge.
Supply and lay standard size bricks subclass B type complete all as specified and directed by Engineer-in-Charge.
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 liter, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, conncection piece fixed along walls with all fixing material required at site and electric connections with copper cable 3 cor and plug top 15 A including making good to distrubed surface complete all as specified and directed by Engineer-in-Charge.
S&F Gun metal globe or gate valve with iron wheel haed screwed both ends for iron pip and fixed for GI pipes of size 15 mm bore complete all as specified and directed by Engineer-in-Charge.
M & L for concealed conduit point wiring complete for light/fan on independent /combine board with cable 2.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, including conduit fittings after hasing in wall and making good the distrubed surfaced include sunken iron box 3mm thick bakelite sheet cover pipe hooks elbows, brass screws washers with provision of earth continuity conductor of 2.5 sqmm copper single cor PVC FRLSH insulated cable controlled by one switch and connected to common earch dolly for one socket outlet 3 pin 15 amps complete all as specified and direced by the Engineer in charge.
S&F in replacement MCB protected Socket 25 Amps in renewal with plastic box and plug top verticl din rail mount type suitable to operate at 240V current rating range 25 A, 50HZ 1 Ph, complied IS specification 13032 & 8623 complete all as specified and direced by the Engineer in charge.
S&F RCCB cap 25 Amps with sensivity 30 mA double pole in accordance with IS 12640-1& IEC 61008-1) 240/415, 50Hz with 10kA short circuit, AC type withstand capacity including enclosure and other accessories complete all as specified and direced by the Engineer in charge. Note :- RCCB should be fixed in DB with connection of geyser circuit
Note : Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
PAREEK AND COMPANY
KHANNA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .