REPAIR REPLACEMENT AND MAINTENANCE OF INTERNAL WIRING REPLACEMENT OF LIGHT FITTING AND EARTHING INSIDE OTM MD ACCN AT VARIOUS LOCATIONS OF AUNDH MILITARY STATION RANGE HILLS AREA UNDER GE MH AND RH KHADKI

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking into credit (credit for above items shall be made as per condition laid down under schedule of credit seprately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed

Material & Labour for point wiring using approved colour coding as per IS (Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and sheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade,PVC casing & capping of suitable size on walls/roof/floor etc, ISI marked with suitable accessories , mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally , covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulator etc, including PVC insulated multistranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr-in-charge for the following :- Make: polycab /Finolex/ RR

One fan/light /bell point controlled by one switch/bell push

One switch socket outlet 5 Amps on independent board

One socket outlet 5 Amps on the same board

All as per Item No 2 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated but sheathed copper conductor FRLS cable 1100Volts grade and 2.5 sqmm as earth continuity conductor for one switch socket outlet 15 Amps on independent board complete all as specified and directed by Engr- in - Charge.

All as per Item No 2 here-in-before but with 4.0 Sqmm PVC insulated multistranded copper conductor cable including 4.0 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 4 sqmm as earth continuity conductor for power socket on independent board complete all as specified and directed by Engr- in - Charge.

Material & Labour for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and unsheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade,PVC Conduit of suitable size on walls/roof/floor etc, ISI marked with suitable accessories , mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally , covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulator etc, including PVC insulated multistranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr-in-charge for the following :- Make polycab /Finolex/ RR

One fan/light /bell point controlled by one switch/bell push

One switch socket outlet 5 Amps on independent board

One socket outlet 5 Amps on the same board

All as per Item No 5 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 2.5 sqmm as earth continuity conductor for one switch socket outlet 15 Amps on independent board through medium PVC conduit complete all as specified and directed by Engr- in - Charge.

All as per Item No 5 here-in-before but with 4.0 Sqmm PVC insulated multistranded copper conductor cable including 4.0 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 4 sqmm as earth continuity conductor for power socket on independent board through and including medium PVC conduit complete all as specified and directed by Engr- in - Charge.

Material & Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into and including PVC Cassing capping of suitable size including 4.0 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed by Engr-in-Charge. Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

Ditto item no 08 above but of 6 Sqmm

Supply and fix in repair ceiling rose surface bakelite with three terminals type in complete all as specified and directed.

Supply and fix in repairs switch piano type one way 6 Amps flush type , 240volt AC complete all as specified and directed

Supply and fix in repairs socket outlet 2 in1,3 pin 5 Amps complete all as specified and directed

Supply and fix in repairs switch socket combination (SSC) 2 in 1, 3 pin, 5 Amps flush type ,240volt AC complete all as specified and directed

Supply and fix in repairs switch piano type 16 Amps flush type ,240volt AC complete all as specified and directed

Supply and fix in repairs socket outlet 2 in 1, 3/ 5 pin 16 Amps flush type complete all as specified and directed

Supply and fix in repairs switch socket combination (SSC) 2 in 1, 3/5 pin, 16 Amps flush type ,240volt AC complete all as specified and directed

Supply and fix in repairs Bell push, flush type, 6 Amp flush type ,240volt AC complete all as specified and directed

Supply and fix in repairs switch piano type two way 6 Amps flush type ,240volt AC complete all as specified and directed

Supply and fix in repairs Bell push, Modular type, 6 Amp flush type ,240volt AC complete all as specified and directed

Supply and fix in repair modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular switch 2 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular socket 6A /16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular fan regulator,120 watt - 2 module complete all as specified and directed.

Supply & fix ix in repair stepped type electronic fan regulator 120 watt, 240 volt flush type on the existing phenolic laminated sheet complete all as specified and directed

Supply and fix in repair electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Supply and fix in repair Modular white cover plate with frame of following size complete all as specified and directed.

1 module

2 module

3 module

4 module

6 module

8 module

Supply and fix in repair of RCCB 63 A, four pole, 30 mA complete all as specified and directed by Engr-in-chrge. Make: Hager/L & T/Standard

Supply and fix industrial wall mounted plug socket suitable for IP 44 degree of protection of 32Amps rating 2P+E complete all as specified and directed. Make: L&T/Indoasian/C&S/Legrand

Supply & fix sheet metal enclosures for double door distribution board factory made duly painted of following capacity with 200 amps rated bus bar, suitable for fixing MCB /Isolators complete all as specified and directed. Make : L & T/Legrand/Havells

12 way SPN , 240V

8 way SPN 240V

4 way TPN ,415V

8 way TPN ,415V

Supply & fix MCCB 125 Amps, 4 pole, Breaking capacity 16 KA, 415 V adjustable type all as specified of capacity complete all as specified and directed Make: L &T /Legrand/Indoasian/standard.

Ditto item no 31 above but of capacity 100 Amps.

Supply and fix miniature circuit breaker (MCB) of following current carrying capacity, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Make L &T /Legrand/Havells

SP 5/6 to 32 AMP,240V, 10 KA 'B' curve

SP 40 AMP,240V, 10 KA 'B' curve

SPN 32 Amps,240V, 10 KA 'B' curve

SPN 40 Amps ,240V, 10 KA 'B' curve

TPN 63 Amps,240V, 10 KA 'B' curve

Supply & fix wall mounted extruded aluminium housing high quality indoor batten of following capacity colour temperature 6500 K (4' long) lumen 2000 to 3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Havells/Wipro/Halonix Note:- The rates are inslusive of cost of square box - 02 Nos including suitable size of clamps and screws etc.

LED tubelight fitting of 20 watt/22 watt , 4 Ft long

LED tubelight fitting of 10watt, 2 Ft long

Supply & fix wall/ceiling mounted Inverter LED tube light fitting 4' feets long with opal diffuser and having aluminium body. Energy efficient high quality invertor batten should have Lithium ion battery of 3.7V, 19 WH having inbuilt battery backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficasy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Havells/Jaquar/Halonix/Crompton . Note :- The rates are inclusive of cost of square box-02 nos including suitable size of clamps and screws etc.

Supply & fix Recess mounting LED flat panel light fitting of following wattage and size with efficient LEDs lumen 2000 to 3000, PF> 0.9, THD less 15% including taking down unserviceable fitting of any type and make complete all as specified and directed Make : Havells/Wipro/Halonix

36 watt, 600mm x 600 mm size

18/20 watt, (1x1 )ft

Circular in size18/20 watt not less then 6'' dia

Supply & fix wall mounted high quality indoor wall bracket light cylinderical/oval shape aesthetically designed fitting with B22D lamp holder and 12 Watt bulb temp range 4000k to 6500 K as per site requirement connecting with three core flexible copper wire complete all as specified and directed by Engr-in-charge. Make : Halonix cat No: HLWB-01-B22 or equivalent in Havells/Wipro

Taking down old unserviceable MH bay light and Supply and Fixing high efficient suspended type 150 watt, 230 V, lumen 2000 to 3000, PF> 0.9, THD less 10% LED bay light of die cast aluminium housing with lens embedded PC cover IP 66 with efficasy not less then 120 lm/W, as per IS -10322 , high voltage cut off,open and short circuit protection including constant voltage and current LED driver all as directed. Note: (i) Making arrangement for T & P to fixing of bay light is incluided in quoted rate. Make : Havells/wipro/Halonix

Taking down old unserviceable Bldg security light and Supply & fix high efficent LED building security light 30 watt, 230 V, lumen 2000 to 3000, PF> 0.9, THD less 10%, made of pressure cast aluminuim housing with high power LEDs, lens and toughned glass IP 66 connecting with three core flexible copper wire from connector to ceiling rose complete all as specified and directed Make Halonix/Bajaj/Havells.

Supply & fix in repair bracket for mounting building security light made out of 40 mm dia Light Grade GI pipe bend in angle with holding MS clamps two nos each bracket of size 25x3 mm including screw etc for fixing complete all as specified and directed by Engr-in-charge

Decarbonizing of indoor MCB DB's / Meter box panel and distribution panel of bldgs by dismantling the old MCCB's, old Bus bars , cable connections, old Amps meter and old voltmeter and cleaning the panel with ctc solvent, and removing the old/burnt control wiring, replacing the old/burnt bus bar of any size if any and fixing properly the hanging/loose front and rear opening doors of the panels, by welding of hinges including welding of broken MS sheet using extra sheets of required size also replacing burnt thimbles with new existing size thimbles, indicator lamps, including powder coating painting of panel with suitable 'U' type gasket to make it dust and vermin proof, providing fancy locks incluidng dismantling the existing connected cables and re-connecting the same cables complete all as specified and directed by Engr -in- charge.

Material & Labour for earthing complete in repairs with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to 4.0 mm dia galvanised earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 (20mm graded stone aggregate) RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and complete all as specified and directed. Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge.

Material & Labour for repairs /re-fixing on exiting or new location to storage type electric water heater (geyser) of storage capacity 25 ltrs /35 ltrs /50 ltrs of any make comprising of the following works mentioned here under againt Ser Nos (a) to (f) at different locations (a) Inspection, taking down, opening ( dismantling ) descaling, brushing, cleaning of storage tank (b) Examine water tightness of storage tank after cleaning. (c) Carry out operation of all stop cocks, pressure reducing valves etc. to ensures free movement of the working parts. (d) Supply & fix Replacement of the rubber / PVC gasket to ensure water tightness. (e) Checking of safety valve (f) Testing of geysers after repairs.

Supply & fix in repairs thermal cutout ISI marked temp range 50 to 80/90 degree as required at site for geyser of capacity 25 Ltr /35 Ltr /50 Ltr of any make complete all as specified and directed by Engr-in-charge

Supply & fix in repairs safety valve/high pressure valve ISI marked as per site requirement complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs heating element of following rating as required at site including rubber washers complete all as specified and directed by Engr-in-charge.

1/1.5 KW,240 volt

02 KW ,240 volt

Supply & fix in repairs PVC pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 cm long for cold water connection complete all as specified and directed by Engr-in-Charge

Supply & fix in repairs metal braided PVC/CP pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 45 CM long for hot water connection complete all as specified and directed by Engineer-in-charge.

Supply & fix in repairs, non return valve 15 mm dia of brass, ISI marked complete all as specified and directed by Engineer-in-charge.

Supply & fix in repair stop valve, cast copper alloy screw down high pressure crutch handle, screwed both end for iron pipe suitable for 15 mm bore complete all as specified and directed by Engr-in-Charge

Material & Labour for repairing and replacment of unserviceable copper container of capacity 25 Ltrs to 50 Ltrs of solar water heater of any type after completion of work testing the heater for following complete all as specified and directed by Engr-in-Charge

Copper container 50/100 ltr

Copper container capacity 25 Ltrs of water heater (gyeser)

Taking down following old unserviceable Ceiling /Exhaust/Air circulator fans of any type from any height and Material & Labour for rewinding of Ceiling Fan, Exhaust Fan and Air circulator of any type/make by split opening the fan carrying cutting the burnt winding and cleaning the slots and rewinding with super enamelled copper winding wire of appropriate gauge including connection, capacitor base and testing for following complete all as specified and directed by Engr-in-Charge. Note: Bearing, fan canopy, capacitor, down rod etc will be measured and paid separately under relevant item of schedule.

Ceiling fan of 1200/1400 mm sweep

Exhaust Fan of sweep 275 to 300 mm

Exhaust Fan of sweep 350 to 450 mm

Air circulator of sweep 350 to 450 mm

Supply only ball bearing (DE/NDE) to match the existing make suitable for 1200/1400 mm sweep ceiling fan including greasing complete all as specified and directed by Engr-in-Charge. Make: SKF/NBC

Supply only ball bearing suitable for 275 mm to 450 mm exhaust fan complete all as specified and directed Make : SKF/NBC

Supply only fan capacitor of following capacity complete all as specified and directed

capacitor 2.5 mfd

capacitor 4 mfd

Supply only , rubber yoke, MS Clamps, bolts nuts with split pin suitable for ceiling fan 1200 /1400 mm sweep complete all as specified and as directed by Engr-in-charge.

Supply only gunmetal bush of suitable size for ceiling fan 1200 /1400 mm sweep complete all as specifed and directed by Engr-in-Charge.

supply only fan down rod of following length with white enamelled painted with both side hole for hanging fan of sweep 1200/1400mm sweep complete all as specified and directed by Engr-in-charge

1 ft long

2 ft long

Supply only stator for ceiling fan of 1200/1400 mm sweep with silicon coating, anti rust coating, size and slot as per sample, feasible to fix in exisiting rotor size complete all as specified and directed

Supply only rotor for ceiling fan of 1200/1400 mm sweep with silicon coating, anti rust coating, size and slot as per sample, feasible to fix in exisiting stator size complete all as specified and directed

Supply only fan canopy set off white /white coloured as per colour of ceiling fan of sweep1200/1400mm complete all as specified and directed

Material & Labour in repair for following PVC polycarbonate rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of following size make cutting for fixing existing switches, sockets, regulators and make necessary connection and testing complete all as specified and directed by Engr-in-Charge.

100 mm x 100 mm and 50 mm deep

200 mm x 150 mm x 50 mm deep

250 mm x 200 mm x 50 mm deep

150 mm x 150 mm x 50 mm deep