Reconstruction work of narrow bridge on Eastern Yamuna Canal at Bhainswal to Silawar Road at Km 1 in Distt. Shamli in. F.Y. 2025-26

Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. Technical Specifications no. 12.24, 1100, 1600 & 1700 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. as per MoRT&H specification clause No 1600, 12.42 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Cement Concrete for Reinforced Concrete M 35 Grade (RCC Grade M35 using batching plant transit mixer & Concrete pump) in Pile Cap complete as per Drawing and Technical Specification No. 12.40D case I, 1100, 1500 & 1700 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing and laying of PCC M15 (using batching plant & manual placing) levelling course 100mm thick below the pile cap. as per MoRT&H specification clause No 1100 & 1700, 12.41 case II I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Plain/Reinforced cement concrete M 35 Grade in sub-structure complete as per drawing and Technical Specifications as per MoRT&H specification clause No 1500, 1700 & 2200, 13.05 H (p) I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in substructure complete as per Drawing and Technical Specifications. as per MoRT&H specification clause No1600 & 2200, 13.06 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Furnishing and Placing Reinforced/ Prestressed cement concrete M-40 (Using Batching Plant, Transit Mixer and Concrete Pump) including formwork in superstructure as per drawing and Technical Specification as per MoRT&H specification clause No 1500, 1600 & 1700, 14.01E (i)(p) I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing structural steel for super-structure complete as per drawing and technical specifications as per MoRT&H specification clause No1700, 14.26 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Furnishing and Placing Reinforced/ Prestressed cement concrete M-35 (Using Batching Plant, Transit Mixer and Concrete Pump) including formwork in superstructure as per drawing and Technical Specification as per MoRT&H specification clause No 1500, 1600 & 1700, 14.01E (i)(p) I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in super structure complete as per Drawing and Technical Specifications. as per MoRT&H specification clause No 1600, 14.02 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Strip Seal Expansion Joint Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. as per MoRT&H specification clause No 2607, 14.21 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Drainage Spouts complete as per drawing and Technical specification. as per MoRT&H specification clause No 2705, 14.09 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Provision of M-30 grade Reinforced cement concrete crash barrier at the bridge decks & approaches to bridge structures, constructed conforming MoRT&H Specification and as per details given IRC -5 including dowel bars , expansion joints filled with pre-moulded asphalt filler board etc.. and approved drawing and at locations directed by the Engineer, all as specified. as per MoRT&H specification clause No 800, 14.15C I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Reinforced cement concrete approach slab including M30 grade and formwork complete as per drawing and Technical specification. as per MoRT&H specification clause No 1500, 1600, 1700 & 2704, 14.11 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

PCC M15 Grade (PCC Grade M15 using batching plant & manual placing) leveling course below approach slab complete as per drawing and Technical specification as per MoRT&H specification clause No 2700, 14.10 case II I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. as per MoRT&H specification clause No 2702, 14.04 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per MoRT&H specification clause No 803, 8.08 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Supplying, fitting and fixing Free Bearing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications. as per MoRT&H specification clause No 2000 & 2200, 13.18 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Supplying, fitting and fixing Longitudinal Guided Bearing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications. as per MoRT&H specification clause No 2000 & 2200, 13.18 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Supplying, fitting and fixing Transverse Guided Bearing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications. as per MoRT&H specification clause No 2000 & 2200, 13.18 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Supplying, fitting and fixing Fixed Bearing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications. as per MoRT&H specification clause No 2000 & 2200, 13.18 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. as per MoRT&H specification clause No 2504, 16.05 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications as per MoRT&H specification clause No 2504, 16.04 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Plain cement concrete 1:2:4 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in below pile cap foundation and compacted by vibration including curing for 14 days. as per MoRT&H specification clause No 2100, 12.04. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing and laying of boulder apron laid in wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg each. as per MoRT&H specification clause No 2503, 16.02 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 301.5 I/c all cess, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes 63 mm to 45 mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes 53 mm to 22.4 mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per technical specificaton clause 502 I/c all cess, Labour cess, levy, toll fee, royalty, cost of bitumen emulsion (S.S. Type) Contractor Profit but excluding GST.

Providing and applying tack coat with bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface with hydralic broom as per technical specificaton clause 503. I/c all taxes, Labour cess, levy, toll fee, royalty, cost of bitumen, Contractor Profit but excluding GST.

Providing, laying and rolling of open-graded Premix Carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades. as per technical specificaton clause 508. I/c all taxes, Labour cess, levy, toll fee, royalty, cost of bitumen, Contractor Profit but excluding GST.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510A I/c all taxes, Labour cess, levy, toll fee, royalty, cost of bitumen Contractor, Profit but excluding GST.

Please Enable Macros to View BoQ information