Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹39.1 LAccepted-AOC | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹42.6 L+₹2.7 L (6.86%)Rejected-Finance | 2 | Rejected-Finance Not L1 Bidder | |
| 3 | 3₹43.4 L+₹3.5 L (8.90%)Rejected-Finance | 3 | Rejected-Finance Not L1 Bidder | |
| 4 | Rejected-Technical | - | Rejected-Technical Not recommended, since, not enlisted the Category b (i) |
Tender Value
₹38.8 L
EMD Value
₹77,600
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
RENOVATION OF DSC SINGLE ACCN WITH DSC MESS AT CQA SA ICHAPUR UNDER GE NORTH KOLKATA
2022_MES_568130_1
8205/2022-23/E8/GE(N)/KOL/ OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
ISHAPORE
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹77,600
Yes
3 Feb 2023
8 Dec 2022
6 Jan 2023
9 Dec 2022
5 Jan 2023
22 Dec 2022
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off premises complete all as specified and directed.
Material and Labour for non-skid ceramic colour tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sq, in floors etc laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade/colour/ matrix of the tiles complete complete all as specified and directed.
All as per item no 2 above but as in skirting/dado but over 10 mm thick bedding layer of mortar in CM 1:4 complete all as specified and directed.
Material and Labour for glazed ceramic colour tiles in vertical surface 350x250x7mm/ 450x350x7mm thick laid over and including 10mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade/ colour/ matrix of the tiles complete all as specified and directed.
Material and Labour vitrified ceramic tile 10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors laid over & including 15 mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and directed.
All as per item no 5 above but as in skirting/dado but over 10mm thick bedding layer of mortar in CM 1:4 complete all as specified and directed.
Demolition of cement concrete in ground floors & paving not exc 15 cm thick (above or below GL) complete all as directed.
M&L for 40mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor and finish the surface even and fair without using extra cement complete all as specified and directed.
Roughening existing concrete surface of floor by picking, sweeping clean and washing down with water to remove dust etc for fixing tiles complete all as specified and directed.
M&L for pre-polished machine cut kota stone slab for flooring of 18 to 20mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 20mm thick screed bed or bedding layers of cement mortar 1:4 for laying of floor finishes complete all as specified and directed.
All as per item no 10 above but as in skirting/dado, riser of staircase over 10mm thick bedding layer of mortar in CM 1:3 complete all as specified and directed.
Taking down door/ window chowkhats with shutters (without taking off shutters from the frames) area not exc 1.5 sqm each complete all as specified and directed
S & F solid PVC door frame of size 50mm X 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. square tube, suppling and fixing in opening as per specification & drawing complete all as specified and directed.
S & F factory made solid moulded door shutter, with wood free EPS 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as Specified and directed.
Supply and fix steel window with side hung shutters including projecting or box type hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glass including one shop coat of primer complete all as specified and directed
Supply and fix steel window with side hung shutters including projecting or box type hinges with steel handle peg stay and divided into square without glazing bars dovetailed or welded, to receive glass gauge etc including one shop coat of primer complete all as specified and directed.
Supply and fix steel windows or ventilators, fixed type with glazing bars to receive glass gauge etc including one shop coat of primer complete all as specified and directed.
Supply and fix 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane etc complete all as specified and directed.
Supply and fix steel ventilators with top hung shutter including hinges peg stay to receive glazing or gauzing and handle on both sides including one shop coat of primer complete all as specified and directed.
Supply and fix for 3.0 mm thick figured glass pin headed type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
Taking down door/ window chowkhats with shutters (without taking off shutters from the frames) area exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed.
Supply and fix pressed steel frames of size 150 x 60 for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
Supply and fix for pressed steel frames of size 165 x 60 for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
M & L for 2nd class HW plain framed, panelled shutter, 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part-I), klin seasoned and chemically pressure treated complete all as specified and directed.
M & L for 2nd class HW 35mm thick, glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mtired beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8 clause 8.24(a) and fitted to chowkats complete all as specified and directed.
Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters : walkways, railings, framework of water tanks and similar works conforming to Fe-290, Gde-E-165 complete all as specified and directed.
Material and Labour for PCC 1:3:6 type C-1(using 20mm graded stone aggregate) as in holdfast and back filling in pressed steel door frame complete all as specified and directed.
Supply and fix 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
Supply and fix 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
Supply and fix 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed.
Supply and fix butt hinges, light weight, cold rolled mild steel 100 mm long with welding to frame supplied and fixed complete all as specified and directed.
Supply and fix 300mm aluminium anodised sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fix inf bolt and sliding bolts of extruded section or cast aluminium alloy and fixed
Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150mm long cover plate complete all as specified and directed.
Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
S & F powder coated aluminium (minimum thickness of powder coating 50 micron) work for door, windows ventilators and partitions (fixed portion) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 & IS:1285, fixing with dash fasteners of required dia & size, including necessary filling up the gaps at junction, i.e. at top bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, CP brass/stainless steel screws, as per architectural drawings complete all as specified and directed.
S & F powder coated aluminium (minimum thickness of powder coating 50 micron) work for door, windows ventilators including providing and fixing hinges/pivots and making provn for fixing wherever required including the cost of EPDM rubber/neoprene gasket etc (fittings shall be paid separetely) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 & IS:1285, fixing with dash fasteners of required dia & size, including necessary filling up the gaps at junction, i.e. at top bottom and sides with required EPDM rubber/neoprene gasket etc . Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, CP brass/stainless steel screws, as per architectural drawings complete all as specified and directed.
S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screw @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening as per requirement complete all as specified and directed.
M & L for 12mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations fixed with screws to timber frame work complete all as specified and directed.
Supply and fix 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5sqm in each pane etc.complete all as specified and directed.
M & L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane etc complete all as specified and directed.
Dismantling of existing roof treatment (any thickness) including layer of bitumen felt, concrete padding and benching including hacking for key, scrubbing down, with water complete to receive new roof treatment including rubbish off the premises to a distance exc 0.5 Km but n. exc 1.5 Km from the site of work complete all as specified & directed.
Material and Labour for cutting out cracks to V section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified & directed.
Material and Labour for cement concrete 40mm thick, type B-0 1:2:4 (using 12.50 mm graded aggregate) for padding etc and finished the surface even and fair complete all as specified and directed.
Material and Labour for rendering 10mm thick cement plaster in CM 1:3 on top concrete surfaces finished even & smooth without using extra cement using water proofing compound @3% by weight of cement (water proofing compound shall be measured & paid seperately) complete all as specified & directed.
Supply only integral water proofing compound complete all as specified & directed.
Material and Labour for providing water based liquid elastomeric water proofing membrane for roof treatment consisting of light fast non-lead/ chrome pigments acrylic co-polymer binder having volatile organic compound 15-45gms/ ltr with minimum density of 1.26 + 0.02gm/cubic cm and minimum dry thickness of 600-800 microns including surface preparation as per manufacturers instructions complete all as specified & directed. (Make : Aquatech exterior roof waterproof of IWL/STP/Dulux or equivalent)
Material and Labour for cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) as in benching on chajja, parapet wall and sides of wall complete all as specified & directed.
Supply and fix in repair 15mm bore GI pipe medium grade with all fittings and fixed to wall and floor etc complete all as specified & directed.
Supply and fix in repair 20mm bore GI pipe medium grade with all fittings and fixed to wall and floor etc complete all as specified & directed.
Supply and fix in repair 25mm bore GI pipe medium grade with all fittings and fixed to wall and floor etc complete as specified & directed.
Supply and fix in repairs vitreous china squatting pan, orissa pattern, of size 580mm x 440mm with integrated foot rest, S or P trap including cement concrete bedding complete as specified & directed.(Make : parryware, Hindware, Cera)
Supply and fix in repair 10 ltrs capacity, PVC valve less syphonic action type, low level flushing cistern, white with inlet ball valve float and handle including brackets and flush pipe complete all as specified & directed.
Supply and fix in repair vitreous china urinal, half stall type, white type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement: fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe(excluding flushing cistern and flush pipe) complete all as specified & directed.
Supply and fix in repair vitreous china wash basin, white flat back, size, 630 x 450 mm excluding taps, waste, chain and plug and porcelin stopper but including brackets complete all as specified & directed.
Supply and fix sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilevers brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified & directed.
Supply and fix in repair pillar tap fancy type 15mm dia, cast copper alloy with capstan heads, chromium plated screws down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified & directed.
Supply and fix tubular towel rail, brass chromium plated 20 mm dia, D type, 60 cm long between flanges complete as specified and directed.
Supply and fix PVC connection 15mm dia, 450mm long including brass fly nuts at both ends etc.complete all as specified & directed.
Supply and fix PVC connection 15mm dia, 600mm long including brass fly nuts at both ends etc. complete all as specified & directed.
Supply and fix in repair 40mm bore waste coupling of PTMT (half or full threaded). (Min weight 40mm-60gms) complete all as specified & directed.
Supply and fix in repair 32mm bore waste coupling of PTMT suitable for urinals. (Min weight 32mm-45gms) complete all as specified & directed.
Supply and fix grating doom 100mm dia of PTMT (Min weight 25 gms) complete all as specified & directed.
Supply and fix low density PVC pipe 40mm dia as in waste pipe to wash basin including bend fixed in wall with clamp and floor etc complete all as specified and directed.
Supply and fix in repair 125mm size brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
Supply and fix in repair CP fancy type bib tap 15mm dia cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
Supply and fix in repair CP fancy type stop valve 15mm dia cast copper alloy high pressure with crutch or butter fly handle scrwed for iron pipe or union and fixed complete all as specified and directed.
Supply and fix curtain rod Harrison rails 20mm dia, mild steel, chromium plated, with fixing brackets, stops, rollers etc. fixed to walls with screws etc. complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
Supply and fix PVC (SWR) 110mm bore pipes single socket, in any length with rubber ring joints fixed to walls complete all as specified and directed.
Supply and fix 50mm bore high density polyethylene pipes (HDPE) of pressure rating 6Kgf/CM2 laid in trenches complete all as specified and directed.
Supply and fix PVC (SWR) 110mm bends any radius complete all as specified and directed.
Supply and fix PVC (SWR) reducers of 75mm bore complete all as specified and directed.
Supply and fix PVC (SWR) vent cowl of 75mm bore complete all as specified and directed.
Supply and fix PVC (SWR) 110mm bore junction double, (double T) equal or unequal complete all as specified and directed.
Supply and fix PVC (SWR) 110mm bore junction double, (single T) equal or unequal complete all as specified and directed.
Supply and fix PVC (SWR) branch piece, single (Single Y) equal or unequal complete all as specified and directed.
Supply and fix 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fix 50mm dia PVC (SWR) floor, plain with grating including jointing with solvent cement complete all as specified and directed.
Supply and fix PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.
Material and Labour for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) finished even & smooth without using extra cement as in plinth protection including bitumen/mast filling in between the joints upto appropriate depth complete all as specified and directed.
Repairing & servicing to collapsible gate including necessary welding, greasing, replacement of roller runner, BS handle etc complete all as directed by Engr-in -charge.
Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrabbing down with water, including taking down roots of trees etc. complete all as specified and directed.
Material and Labour for rendering 10mm thick on brick or concrete surface in CM 1:6, finished even & smooth without using extra cement complete all as specified and directed.
Material and Labour for preparation of newly plastered surface of wall and applying plaster of paris putty of 1mm thickness over plastered surface and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.
Material and Labour for rendering 5mm thick in CM 1:3 as in ceiling finished even and smooth without using extra cement etc. complete all as specified and directed.
Material and Labour for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
Material and Labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces using water proofing compound @ 3% by weight of cement over 10mm plaster with finished even and smooth without using extra cement complete all as specified and directed.
Material and Labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltrs and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltrs/10 sqm over and including priming coat of exterior primer applied @ 0.90 ltrs/ 10sqm over new surfaces complete all as specified and directed.
Material and Labour for applying one coat of oil emulsion distemper on old decorated wall surfaces including preparation of old surfaces & filling cracks and holes with cement base putty or cement morter 1:2 to match with the existing new plaster surface complete all as specified and directed.
Material and Labour for applying one coat of white wash on old decorated ceiling surface including preparation of old surfaces complete all as specified and directed.
Material and Labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltrs and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltrs/10 sqm over and incl priming coat of exterior primer applied @ 0.90 ltrs/ 10sqm over old surfaces complete all as specified and directed.
Material and Labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material and Labour for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (1st Grade quality) complete all as specified & directed.
Material and Labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (1st Grade quality) complete all as specified & directed.
Demolition of reinforced cement concrete in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) and including removal of rubbish off premises complete all as specified and directed.
Material and Labour for RCC 1:1.5:3 (nominal mix) type A1(using 20mm graded stone aggregate) as in chajja complete all as specified and directed. (Note : Form work and reinforcement shall be measured and paid separately)
Material and Labour for use & waste of form work to chajja's etc, flat and rough finished surfaces complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone and pre-cast concrete articles complete all as specified and directed.
Material and Labour for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Dismantling of water tank of exc 250 ltrs but not exc 500 ltrs and removing to store any description complete all as specified and directed.
Supply and fix rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) 500 ltrs hoisted and fixed in position including brass ball valve 20mm complete all as specified and directed.
Supply and fix in repairs ball brass valves 20mm, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Supply and fix in repair 25mm bore dia of pipe, gun metal gate valves with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.
Supply and fix in repair 20mm bore dia of pipe, gun metal gate valves with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.
Taking down carefully aluminum/copper point wiring any type including batten/casing caping for light/fan/bell/socket or power and including unscrewing from board, fitting and fixture such as switches, socket, ceiling rose, lamp holder, pendants, bracket and regulator etc and removing u/s material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.
Material and labour for concealed point wiring for one light point controlled by one way switch with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuity conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuity conductor shall be connected to common earth complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate).
All as per item No 110 above but One light point controlled by two way switch complete all as specified and directed.
All as per item No 110 above but One fan point controlled by one way switch complete all as specified and directed.
All as per item No 110 above but for one 3 pin socket outlet 5/6 Amps on the independent board complete all as specified and directed.
All as per item No 110 above but for one 3 pin socket outlet 5/6 Amps on the same board with other switches complete all as specified and directed.
All as per item No 110 above but with 2.5 Sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade for one 3 pin 15/16 Amps socket outlet controlled by one way switch on independent board complete all as specified and directed.
Supply and fix switch piano, flush type, single pole one way 5/6 Amp complete all as specified and directed.
Supply and fix switch piano, flush type, single pole Two way 5/6 Amp complete all as specified and directed.
Supply and fix socket outlet 5/6 Amp flush type complete all as specified and directed.
Supply and fix switch socket combination 2 in 1, 3/5 Amp flush type complete all as specified and directed.
Supply and fix switch socket combination 5 in 1, 5/16 Amp flush type complete all as specified and directed.
Material and Labour for ceiling rose PVC/Polycarbonate, isolated body 63.5 x 23.5mm 3 terminals complete all as specified and directed.
Supply and fix box type luminaire, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 22 W, 4ft long with extruded aluminum body, PC diffuser and inbuilt driver, holder, prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. Make :- T/L Fittings: Century LED Ltd Cat part no KCCF02000863/ Wipro Cat part no WIO921208/ Philips Cat part no TMC 501P1XT-LED 22WP3241 or equivalent in Havells/C&S/HPL/Halonix/Jaguar. Make T/L Rod: Century LED Ltd Cat part no TWPP020C/ Wipro Cat part no LL13-181-65SE/ Philips Cat part no MAS LED TUBE 1200 MM 18W865 T81or equivalent in Havells/C&S HPL/Halonix/Jaguar.
Supply and fix in repair wall mounted lamp, brushed nickel finish fixture with opal glass diffuser including. 4 watt LED filament lamp, E14 base complete all as specified and directed.(Make Havells Cat part No LHFOAIC1TZ1C040 or equivalent in approved makes bajaj,philips)
Taking down ceiling fan from existing position after disconnecting all electrical connections and kept in store under safe custody for refixing the same on existing postion complete all as specified and directed.
Hanging only ceiling fan (M.D. Supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Supply and fix in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.
Taking down exhaust fan from existing position after disconnecting all electrical connections complete all as specified and directed.
Fixing only exhaust fan (M.D supply) and connecting up including provision of cable from ceiling rose/connector to fan complete to fan complete all as specified and directed.
Supply and fix in repair sheet metal enclosure DB TPN 415 Volts 4 way double door type with 200 amps rated bus bar fixing MCB complete all as specified and as directed.
Supply and fix in repair MCB-4 pole 415 volts 63 Amps, 10KA, 'C' curve complete all as specified and directed.
Supply and fix in repair MCB-4 pole 415 volts 32 Amps, 10KA, 'C' curve complete all as specified and directed.
Supply and fix in repair sheet metal enclosure DB SPN 240 Volts 8 way double door type with 200 amps rated bus bar fixing MCB complete all as specified and directed.
Supply and fix in repair MCB SPN 240 Volts 6 to 32 Amps, 10 KA, 'C' curve complete all as specified and directed.
Supply and fix in repair MCB SP 240 volts 6 to 32 Amps, 10 KA, 'C' curve complete all as specified and directed.
Material and labour for sub-main wiring with two run of FRLS PVC insulated unsheathed single core multi-stranded copper conductor of size 6 sqmm and one run of 6 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 25 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring complete all as specified and directed. Note : (i) Three run of 6 sqmm cable one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of cable and also making good surfaces are deemed to be included in unit rate).
Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 25 Sqmm 4 core with aluminum conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminum thimble for making connection including taking down old unserviceable cable of any type and size complete all as specified and directed.
Material & Labour for earthing with galvanished steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanished earth lead by means of bolts, nuts, check nuts and washers of galvanished iron or steel using GI or steel wire 4 mm dia as earthing lead as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate, pit funnel, 20mm dia GI medium grade watering pipe 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8 mm dia TMT bar @ 150 c/c both ways, one lifting handle made out of 10 mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer of 15cm thick including taking out old u/s earthing complete all as specified and directed.
S&F 4mm dia galvanished iron or steel wire earth continuity conductor or main earthing lead fixed to wall on batten or recess or burried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required including taking out old u/s wire complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cill, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 20 cm girth complete all as specified and directed.
Supply and fix 50 mm bore galvanished iron pipes, 'light grade' with all fittings and accessories laid in trenches or fixed to wall/ pole etc including taking out old u/s pipe complete all as specified and directed
Supply and fix in replacement bracket for street light, made out of 1.5 m long, 40 mm GI tubing medium grade bent to required angle/shape with and including necessary clamps, nuts, bolts & washers of suitable size and including taking down old existing bracket complete all as specified and directed.
Supply and fix LED Security light 72 Watt die cast aluminum housing with IP-66 protection and surface mounting device LED 72 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI bracket including suitable size of fixing items such as clamps, nut bolts and washer of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete including taking down old light fitting any type complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPSL072C equivalent in Wipro / Philips Pyrotech/Bajaj/HPL/Jaguar/Panasonic.
Excavation in trenches not exceeding 1.5 m width or n exc 10 sqm on plan and n.exe 1.5 m in depth for taking out/laying of cable, foundation etc and getting out in soft/loose soil complete all as specified and directed.
Returning and filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed including spreading, levelling at a level not exceeding 1.5 m from the starting point complete all as specified and as directed
Supply and laying DWC pipe of size 50/38 for cable protection complete with coupler etc. all as specified and directed by Engr in Charge. (Make Triputi,Gemini or as directed)
Material & Labour for cement concrete type B-2, 1:2:4 (40mm graded aggregate) 150mm thick complete all as specified and as directed.
ChakrabortyTraders
RUNJEN CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .