Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.1 Cr
EMD Value
₹4.3 L
Closing Date
8 Nov 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Construction of concrete road from apron to Airport Terminal Building at HAL Nasik
10033
NK/FW/CAP-1591/2024-25
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹0
₹4.3 L
8 Nov 2024
24 Sept 2024
24 Sept 2024
8 Nov 2024
Essential/ Prequalification Criteria
Annual Turnover: Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender] i.e Rs. In Lakhs
Turn over (Rs. In Lakhs)
Audited copies and Audit report by CA with UDIN of financial documents for last five (5) years Viz.Balance sheet, P &L account, Supporting Schedules and notes to account.
Solvency : Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of tender Submission.( Should not be less than 40% of the estimated cost i.e Rs. In Lakhs)
Related Document to be Uploaded to eProcurement Portal.
Not meeting eligible criteria
Experience:
You are Not Eligible
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
GSTIN Registration Number.
ESIC Registration Number
EPF Registration Number
Bid Capacity ( 2AN-B)
Value of the work executed in last five Financial years (Financial year wise)
Related documents to be uploaded in eprocurement portal.
B = value at current price level of existing commitment and ongoing works to be completed in the next ‘N’ years (i.e 06 Months). (Authority:- Ministry of Statistics & Programme Implementation Guidelines Vide DO No 11025/28/2001 Dt. 7-11-01, Standard General Conditions for Domestic Contracts, as per Clause 4.6)
Earnest Money Deposit (EMD)
License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works)
Documents to be uploaded along with tender
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,
Address for correspondence:
Contact details
PAN No.:
I.T Returns for past 03 years (Assesment Year)
Related documents to be uploaded in eprocurement portal.
Bank Balance statement for last three months.
Details of latest overdraft facilities available with the agencies.
Details of plant & machinery for the work.
Proposed work completion schedule in the form of bar- chart.
Details of person holding the power of Attorney.
Related documents to be uploaded in eprocurement portal.
Bank(s) details: [Copy of the cheque leaf to be uploaded]
ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal. And hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc(New bidder).
Acceptance by party for Scope of work as per BOQ and Tender terms & conditions
DECLARATION
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 146) including price bid do hereby accept all the terms and conditions laid down
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.
Specification
Felling trees of the girth (measured at a height of 1 m above ground level) grubbing up tree trunk including cutting of trunks and branches, protruding over ground ,digging out roots ,filling holes and leveling off ground and stacking of serviceable material and disposal/removing of unserviceable material to a distance not exceeding 50 m and clearing site complete all as directed by EIC/OIC.
Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width ) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5m, as directed by EIC/OIC. All kinds of soil
Dismantling carefully the existing brick/stone masonry built in cement mortar at any position including stacking of serviceable material and disposal of unserviceable material within 50 meters lead etc complete all as directed by EIC/OIC.
Dismantling carefully the existing reinforced cement concrete of any description and in any position including cutting the reinforcement wherever required, including trimming the sides including stacking of serviceable material steel bar and disposal of unserviceable material within 50 meters lead etc complete all as directed by EIC/OIC.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials, debris and surplus soil by mechanical means, including loading, transporting, unloading to approved HAL dumping ground or as approved by EIC/OIC, beyond 50 m initial lead, for all leads up to 5 KM including all lifts involved including spreading and leveling etc. complete all as directed by EIC/OIC.
Filling, spreading and leveling with HAL murrum (excavated under item no 2 above) in trenches or embankment in layers (each layer should not exceed 20 cm), including compacting each layer by mechanical/power rolling / ramming and watering , all complete as per drawing/as specified and as directed by EIC/OIC. ( Compaction of earth work in embankment under optimum moisture contains to give at least 95% of the maximum dry density ( Proctor density).
Excavating , supplying , stacking and filling of local earth (HAL factory premises) murrum in trenches or embankment in layers (each layer should not exceed 20 cm) by mechanical transport up to 5 KM lead, including compacting each layer by mechanical/power rolling / ramming and watering , all complete as per drawing/as specified and as directed by EIC/OIC.( compaction of earth work in embankment under optimum moisture contains to give at least 95% of the maximum dry density ( Proctor density).
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of EIC/OIC. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
Providing and Laying in position Cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) including laying at site, spreading and leveling to required slope/ camber, finishing with required texture, compacting curing, excluding the cost of centering and shuttering all as specified as directed by EIC/OIC
Providing and laying 125 micron thick low density polythene sheet, black laid below floor concrete with lap not less than 200mm on the joints complete as specified and as directed by EIC/OIC. ( Measurement will be taken flat on the area of concrete laid without consideration for over lap on any direction.)
Providing and laying in position Thermo-Mechanically Treated bars of grade Fe-500D or more, MS reinforcement of 8 mm dia and above for RCC works including cutting to required length, bent to shape, hooking, cranking, binding with MS wire (annealed) not less than 0.9 mm Dia. or securing with clips, placing in position including providing necessary lapping, spacers, cover blocks complete as specified and as directed by EIC/OIC.
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the EIC/OIC; for the following grades of concrete. All works up to plinth level - Concrete of M40 grade with minimum cement content of 390 kg /cum
Providing centering & formwork for plain or reinforced cement concrete straight, horizontal sloping as required including all cutting & waste centering bracing, strutting and removing the form after the retention period complete as specified & as directed by EIC/OIC for: Formwork to Edges of slabs and breaks in floors and walls and similar work - Under 20 cm wide
Providing and fixing pre-molded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the EIC/OIC. (Pre-molded joint fillers shall be made of bitumen hot sealing compound impregnated fiber board having impregnation more than 35%, conforming to IS:1838 for fiber board and IS: 1834 for hot sealing bitumen compound grade A. MODE OF MEASURMENT OF UNITS=Per cm depth per cm width per m length
Providing and filling in position rubberized bitumen hot sealing compound ( Grade A bitumen) for sealing of expansion and transverse joint in road complete as per direction of EIC/OIC . MODE OF MEASURMENT OF UNITS=Per cm depth per cm width per m length
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed by EIC/OIC, within a lead of 50 m. - All kinds of soil
Providing and laying non-pressure NP3 class (Medium duty) R.C.C. pipe of 450 mm Dia. with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints, laying rise or falls etc. all complete as directed by EIC/OIC.
Providing centering & formwork for plain or reinforced cement concrete straight, horizontal sloping as required including all cutting & waste centering bracing, strutting and removing the form after the retention period complete as specified & as directed by EIC/OIC for:
Providing and laying 1:1.5:3 reinforced cement concrete using 20mm crushed stone as course aggregate and coarse sand as fine aggregate including mixing, placing in position ,compacting, vibrating, curing, finishing the surface of concrete smooth/ hacked as required excluding the cost of centering, shuttering and reinforcement complete as specified as directed by EIC/OIC. - All work up to plinth level :
Providing and laying 1:1.5:3 reinforced cement concrete using 20mm crushed stone as course aggregate and coarse sand as fine aggregate including mixing, placing in position ,compacting, vibrating, curing, finishing the surface of concrete smooth/ hacked as required excluding the cost of centering, shuttering and reinforcement complete as specified as directed by EIC/OIC. - Work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level
Supply, fabrication and fixing of Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer with preparation of surface and cleaning, including welding and bolted with special shaped washers etc. for frame work of railings , gates as per the required design and approved pattern, including required small articles like fasteners, straps, bands , hinges, handles and other as specified etc., complete as directed by EIC/OIC. (The weight of fittings and fixtures made out of steel will be measured and paid under this item.) Hot finished welded type tubes.
Providing, fabricating and fixing in position Structural steel , plate etc. of approved size including necessary cutting, welding, riveting, drilling holes etc. all necessary operations as per requirement complete all as specified and as directed by EIC/OIC.
Providing and applying two coats of synthetic enamel paint on surface of any description of approved quality and shade on newly treated surface including preparation of surface and cleaning etc complete as specified and as directed by EIC/OIC.
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ color using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of EIC/OIC and accordance with applicable specifications.
Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other color combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end
Providing and placing dowel of 20mm dia mild steel plain round bar in expansion joint as per Drawing with 32 mm dia CPVC sleeves with cap , all as specified as directed by EIC/OIC.
Rupees One Crore Eighty Lakh Forty One Thousand Three Hundred Forty and Fifty Seven Paise Only
Approximate Basic Amount Put to Tender
Rupees Thirty Two Lakh Forty Seven Thousand Four Hundred Forty One and Thirty Paise Only
Rupees Two Crore Twelve Lakh Eighty Eight Thousand Seven Hundred Eighty One and Eighty Seven Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Etender_notice.pdf
TENDER_DOCUMENT • 0.46 MB
ECSDetailsForm.PDF
TENDER_DOCUMENT • 0.16 MB
Scopeofwork.pdf
TENDER_DOCUMENT • 0.18 MB
Tender_Document.pdf
TENDER_DOCUMENT • 1.63 MB
Tenderdrawing.pdf
TENDER_DOCUMENT • 0.72 MB
Prequalification1591.xlsm
TENDER_DOCUMENT • 0.02 MB
PriceBid.xlsm
TENDER_DOCUMENT • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .