ADDITION, ALTERATION AND SPECIAL REPAIRS TO BLDG NO. P-04 (FABRICATION DEPT) AND BLDG NO. P-11 (OUTFITTING DEPT) AT NSRY, NAVAL BASE KARWAR

Amount

Taking down chowkhats exc 1.5 Sqm but not exc 4 Sqm with shutter (without taking off shutters from the frames) all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-Charge complete all as specified and directed.

M & L for Glazed coloured ceramic tiles 300 x 200 x 7 mm thick on vertical surfaces such as skirting dados and risers to steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M & L for non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm and not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of precast concrete block walling built in cement mortar and removal of debris ousite the MD land complete all as specified and directed.

M & L for providing precast cement concrete solid building blocks masonry exc 10 cm width, type C1, 1:3:6 (20 mm graded aggregate) set in cement mortar 1:6 all as specified and directed.

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M & L for rendering 10 mm thick in CM 1:6 on fair faces of brick/ concrete surface finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls of any description including and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick/ stone work finished even and smooth without using extra cement with water proofing compound complete all as specified. (WPC will be measured and paid separately).

M & L for preparation of new plastered surfaces of walls of any description including and applying two coats of cement based paint complete all as specified and directed.

Supply only Integral water proofing compound all as specified and directed.

M & L for machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

S & F in repairs vitreous china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings all as specified and directed.

S & F 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, urinals etc complete all as specified and directed.

S & F in repairs for Vitreous China squatting pan (Orissa pattern) of size 580 mm x 440 mm, white with integral foot rests, any pattern including provision of lime concrete bedding (excluding flushing cistern and flush pipe) fixed in repairs, complete all as specified and directed.

S & F in repairs vitreous china wash down water closet (pedestal pattern) white, including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed. NOTE: Quoted rate shall exclude the cost of flush pipe, cistern & seat cover and the same shall be paid seperately under respective items.

S & F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

S & F in repairs PVC low level flushing cistern white 10 litrs capacity and connections to pipes all as specified and directed.

S & F 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/Sqcm including bends elbows, tees etc & fixing materials i.e HDPE/PVC gum laid in trenches complete all as specified and directed.

S & F 75 mm dia PVC(SWR) pipes single stacked in any length laid in floor all as specified and directed.

Description all as per item No. 25.00 above but 110 mm dia complete all as specified and directed.

S & F in repair brass chromium plated Health faucet with spring pipe all as speified and directed. MAKE: Jaquar Cat No ALD-CHR-585 or equivalent makesas specified in list of makes.

S & F Towel rail 600 mm long brass chromium plated with brass chromium plated screws all as specified and directed. MAKE: Jaquar Cat No CAN-111NM or equivalent in makes as specified hereinafter.

S & F in repairs stop valve, cast copper alloy fancy type chromium plated with long shank & cup concealed type for iron pipe of 15 mm bore of etc complete all as specified and directed.

S & F in repairs bib taps, long neck type, cast copper alloy fancy type, chromium plated, screwed for iron pipe15 mm bore all as specified and directed.

S & F in repairs Pillar taps cast copper alloy, fancy type, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.

S & F in repairs MS Chromium Plated grating 125 mm dia suitable for Nahani trap all as directed.

S & F in repairs 15 mm bore 450 mm long PVC connection pipe with two PVC PTMT nuts at each end with rubber washer complete all as specified and directed by Engr-in-Charge.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifiction & drawing complete all as specified and directed.

S & F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 250 mm long complete all as specified and directed.

S & F aluminium alloy anodised handle, cast type 100 mm long complete all as specified and directed.

S & F in repairs 80 mm dia brass chromium plated shower rose with swivel joints fancy type suitable for 15 mm bore GI pipe all as specified and as directed. MAKE: Jaquar Cat Part No: OHS 1985 or equivalent make as specified here in after.

S & F in repairs brass chromium plated shower arms 15 mm dia, 190 mm long all as specified and directed. MAKE: Jaquar Cat No SHA-483 or equivalent in makes Marc/Kohler.

Dismantling structural steel work as in doors, gate but excluding framed truss etc complete all as specified and directed.

Cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering etc complete all as specified and directed.

S & F Steel rolling shutters 1.25 mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with chain wheel and hand chain type all as specified and as directed.

M & L for providing plain cement concrete type B1 1:2:4 (20 mm graded agg) in in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surfaces of any description, over 10 cm in width or girth not otherwise described complete all as specified and directed.

M & L for preparing of old painted plastered surface of walls of any description including cornices and applying one coat of acrylic emulsion exterior grade, weather proof antifungal paint complete all as specified and directed.

M & L for applying one coat of Acrylic washable distemper on old decorated surfaces of wall including preparation of surfaces all as specified and directed.

M & L for applying one coat of Acrylic washable distemper on old decorated surfaces of ceiling including preparation of surfaces all as specified and directed.

S & F powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F prelaminated particle board 12 mm thick interior grade, prelaminated both side with decorative choice lamination as in kitchen cabinets/ shutters fixed with screws in aluminium frame work complete all as specified & directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Brushing neat cement slurry with 3.0 kg of cement per Sqm all complete as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for below or above ground level complete all as specified and directed.

M & L for providing cement concrete, 100 mm thick, type B-1, 1:2:4 (using 20 mm graded aggregate) as in sub base or sub floor etc. complete all as specified and directed.

M & L for stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. conforming to Fe 410-W (Grade E-250) quality A complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description not exc 10 cm in width or girth complete all as specified and directed

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items is measured under schedule of credit) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down carefully existing tubelight fittings/ highbay luminaire light fitting of any capacity from ceiling of any height & offering credit complete all as specified & directed. NOTE: Contractor shall take the old light fittings complete with all accessories such as ballast, starter, capacitor, bulb etc as credit.

M & L for point wiring complete with 1.5 Sqmm two single core PVC insulated, unsheathed 1100 Volts grade cable with stranded copper conductor FR grade conforming to IS-694 Part-II with ISI mark FR grade drawn through and including suitable size rigid non metalic PVC conduit concealed with all accessories, including suitable size sunk pressed steel or cast iron terminal box with 3 mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc including providing 1.5 Sqmm PVC insulated unsheathed solid copper conductor cable as earth wire connected to metallic bodies of luminaires/fan etc at one end and to common earth dolly at other end all as specified for fan/light point complete all as specified and directed.

S & F Integral sleek extruded polycarbonate batten for LED tube light with white acrylic cover suitable for upto 1 x 22 Watts LED tube light complete all as specified and directed. MAKE: Havells Cat No. REGALBATTEN8UPTO1X22WDSBSWH or equivalent in Bajaj/ CG/ Philips/ Shakti

S & F LED tube rod 20 Watt, 6500 K, 1200 mm long complete all as specified and directed. MAKE: Havells Cat No. CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent make in Bajaj/Crompton Greaves/ Philips/ Shakti

S & F in repairs exhaust fan of 300 mm sweep after assembling at site including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing including taking down old defective exhaust fan and depositing the same to MES store yard complete all as specified and directed.

S & F automatic Motorised system of 600 Kg lifting capacity with remote system ISO certified complete all as specified and directed.

S & F in repairs switch piano 5 Amps one way flush type, matching with existing make, ISI marked, all as specified and directed.

S & F in repairs switch socket combination 2 in 1, 3 pin, 5 Amps flush type, matching with existing make ISI marked, all as specified and directed.

S & F in repairs switch socket combination 5 Amps/ 16 Amp, 5 in 1 flush type, multi purpose, matching with existing make ISI marked, all as specified and directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 240 Volts 20 Amps all as specified and directed.

S & F wiring for circuit/ submain wiring alongwith earth wire with 4 x 4.00 Sqmm + 2 x 2.5 Sqmm earthwire of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping complete all as directed.

S & F in repairs energy saving environment friendly 150 Watt LED IP65 industrial medium bay luminaire complete all as specified and directed. MAKE: Havells Cat No. BAYBRITESAUCERHBP200WLED757WBTOLTG or equivalent in Bajaj/Crompton Greaves/Philips/Shakti

LEKSHMI ENGINEERS

M/S KAMALKANTH NAIK

ABDUL RAHIM

Bidder Name

ABDUL RAHIM

LEKSHMI ENGINEERS

KVL CONSTRUCTION

M/S KAMALKANTH NAIK