REPAIRS TO VARIOUS WOODEN FURNITURE MISC FURNITURE AT BSO YARD AND PAINTING POLISHING OF WOODEN AND STEEL FURNITURE AT BAIRAGARH AND SI LINES UNDER GE BHOPAL

Amount

WOODEN FURNITURES REPAIRS TO BED HARD (DRG NO FD-246)

M&L for removal of u/s ply wood of bed in any position, S&F new ply wood 12 mm thick, BWR grade, ISI marked including fixing in same position all as shown on drg with suitable size screws & cup washers, complete all as specified and directed.

M&L for removing u/s headrest and S&F New headrest complete of 1st class hard wood teak frame (well seasoned) duly covered with 4mm thick teak venear ply as shown in drg complete all as specified and directed.

All as per item No 1.02 above, but footrest, rest all as per drg complete all as specified and directed.

M&L for removing of u/s long rail and S&F of new long rail made out of fully seasoned Ist class hard wood all as specified & shown in drg

M&L for removing of u/s support/Stiifner and S&F of new support made out of 2nd class hard wood (Well seasoned) and all as specified & shown in drg complete all as specified and directed.

M&L for removal of u/s veneer ply of Head board of bed complete in any position, S&F new 4 mm thick one side teak veneered ply on both sides, all round teak beading all as shown on drg, complete all as specified directed.

All as per item No 1.06 above but foot board complete all as specified and directed.

S&F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as specificed and directed.

M&L for preparation of wooden surfaces of bed hard including filling of cavities and french polishing with two coats of polish of approved make complete all as specified and directed.

REPAIR TO CHAIR DINING (DRG NO: FD-16 (M) / FD-228 / FD-279)

Removing/ takingout carefully of old existing unserviceable broken back leg of the chair of any description in any position and replacement of back leg with S&F new back leg made of 1st class hard wood and fixing all as shown on drg, complete all as specified and directed.

All as per item No 2.01 here-in-before but front leg with S&F new leg complete all as specified and directed.

All as per item No 2.01 here-in-before but Front/Side/Rear rail incl drilling of holes for caning as specified & shown in drg with S&F new rail complete all as specified and directed.

All as per item No 2.01 here-in-before but stiffner with S&F new stiffner complete all as specified and directed.

All as per item No 2.01 here-in-before but back strip with S&F new back strip complete all as specified and directed.

S&F new hard rubber shoes superior quality with screws of size 20 mm long complete all specified and directed.

S&F new bracket of size 75 x 75 x 25 mm made of 1st class HW with 02 Nos new steel screws of suitable size complete all specified and directed.

Preparation of old and new surfaces of Chair dining and french polishing (two coats) with approved make polish complete all specified and directed.

Removing / taking out broken PVC seat carefully and Supply and fix new PVC sheet 4 mm thick of chair dining (FD/MAP-II/05) as per existing pattern complete all specified and directed.

REPAIR TO CHAIR WRITING (DRG NO FD-20(M) / FD-250 /FD-280)

Removing /takingout carefully of old existing unserviceale back leg of chair writing of any description in any position and S&F new back leg made of 1st class HW all as shown on drg, complete all specified and directed.

All as per serial item No.3.01 above but front leg and S&F new front leg complete all specified and directed.

All as per serial item No.3.01 above but Front/Side/Rear rail incl drilling of holes for caning as specified & shown in drg with S&F new rail complete all specified and directed.

All as per serial item No.3.01 above but back strip and S&F new back strip complete all specified and directed.

All as per serial item No.3.01 above but arm rest and S&F new arm rest complete all specified and directed.

All as per serial item No.3.01 above but stiffner and S&F new stiffner complete all specified and directed.

S&F new hard rubber shoes superior quality with steel plated screws of size 20 mm long complete all specified and directed.

S&F new bracket of size 75 x 75 x 25 mm made of 1st class HW with 02 Nos new screws of suitable size all as approved and directed by Engineer-in-charge.

Preparation of old and new surfaces of Chair and french polishing (two coats) with approved make polish all as specified and directed by engineer-in-charge.

REPAIR TO CHAIR EASY (DRG NO: FD-17 (M) / FD-229)

Removing /takingout carefully of old existing unserviceable broken back leg of Chair easy of any description in any position, S&F new back leg of 1st class HW all as shown on drg, complete all specified and directed.

All as per serial item No.4.01 above but front leg and S&F new front leg complete all specified and directed.

All as per serial item No.4.01 above but side rail and S&F new side rail of seat complete all specified and directed.

All as per serial item No.4.01 above but front/back rail and S&F new front/back rail of seat complete all specified and directed.

All as per serial item No.4.01 above but side rail of back frame and S&F new side rail complete all specified and directed.

All as per serial item No.4.01 above but top/bottom rail of back frame and S&F new top/bottom rail complete all specified and directed.

All as per serial item No.4.01 above but front support rail and S&F new support rail complete all specified and directed.

All as per serial item No.4.01 above but arm rest and S&F new arm rest complete all specified and directed.

S&F new hard rubber shoes superior quality with screws of size 20 mm long complete all specified and directed.

S&F new bracket of size 75 x 75 x 25 mm made of 1st class HW with 02 Nos new screws of suitable size complete all specified and directed.

Preparation of old and new surfaces of Chair and french polishing (two coats) with approved make polish complete all specified and directed.

REPAIR TO CHAIR DINING CUSHIONED (DRG NO :FD/E6/MAP/10)

M&L for removing/ takingout carefully of old existing unserviceable broken back leg of Chair in any position and S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all specified and directed.

All as per serial item No.5.01 above but front leg complete all specified and directed.

All as per serial item No.5.01 above but side rail complete all specified and directed.

All as per serial item No.5.01 above but front/back rail complete all specified and directed.

All as per serial item No.5.01 above but stiffner complete all specified and directed.

All as per serial item No.5.01 above but curved back strip complete all specified and directed.

All as per serial item No.5.01 above but vertical curved strip complete all specified and directed.

S&F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all specified and directed..

M&L for removing/takingout unserviceable U foam and tapestry cloth from the seat and S&F new 75 mm thick, 32 Density foam covered with approved quality tapestry cloth complete all specified and directed.

S&F new bracket of size 75 x 75 x 25 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all specified and directed.

M&L for preparation of new/old surfaces and french polishing with two coats of polish of approved make

REPAIR TO PEG TABLE (DRG NO : FD-277/FD-225/FD-25(M))

M&L for dismandling, taking out carefully and replacement of old existing broken top of peg table of any description, in any position and S&F new top of peg table of 18mm thick prelaminated particle board, exterior grade, BWR with and including 6mm thick teak wood all round beading all as shown on drg, complete all specified and directed.

All as per serial item No.6.01 above but leg with S&F new teak wood leg complete all specified and directed.

All as per serial item No.6.02 above but long rail with S&F new long rail made of 1st class hard wood complete all specified and directed..

All as per serial item No.6.03 above but short rail with S&F new short rail made of 1st class hard wood complete all specified and directed.

S&F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed.

Preparation of old and new surfaces of table and french polishing (two coats) with approved make polish complete all specified and directed.

RECANNING OF CHAIRS

M&L for removing old decayed cane plastic of any size and re-canning with new cane (Superior quality) white colour of chair easy, chair Dining, Chair writing, seat & back of chair CBA, stool dressing CB, chair CBB Spl with hand rest, chair office CB etc with 2mm wide half rounded cane and 3.5mm cane in perimeter as per Godrej pattern complete all specified and directed.

REPAIRS TO SOFA SET 4 SEAT / 5 SEAT/CHAIR EASY (DRG NO : FD-281, HFD-2034)

M&L for replacement of old u/s seat/back cushions, S&F new foam cushion of size 21" x 20" x 100 mm thick, 32 density (Make: Sleepwell/Kurlon) duly covered with tapestry cloth of approved quality/colour/texture (cost of tapestry shall be not less than Rs.180/- per metre) complete all specified and directed.

M&L for replacement of old u/s tapestry cloth of seat/back cushions, S&F new tapestry cloth of approved quality/colour/texture (cost of tapestry shall be not less than Rs.180/- per metre) complete all specified and directed.

M&L for replacement of old u/s seat/back cushions, S&F new foam cushion of Chair Easy, 32 density (Make: Sleepwell/Kurlon) duly covered with tapestry cloth of approved quality/colour/texture (cost of tapestry shall be not less than Rs.180/- per metre) all as specified in drawing and directed.

M&L for preparation of surfaces of Sofa Set 5 seater including filling of cavities and french polishing with two coats of polish of approved make complete all specified and directed.

All as per 8.04 above but for Sofa Set 4 Seater complete all specified and directed.

REPAIRS TO TABLE DINING 6/8 PERSONS (DRG NO : FD-273)

M&L for removal of u/s top of table dining 6 persons in any position, S&F new top made of 18mm thick prelaminated particle board one side laminated & other side white balancing, exterior grade, including 4mm thick teak wood beading all round, fixed in position all as shown on drg, complete all specified and directed.

All as per serial item No.9.01 above but Top for Table dining 8 persons complete all specified and directed.

All as per serial item No.9.01 above but S&F new leg made of 1st class hard wood complete all specified and directed.

All as per serial item No.9.01 above but S&F new long rail complete all specified and directed.

All as per serial item No.9.01 above but S&F new short rail complete all specified and directed.

All as per serial item No.9.01 above but S&F new support stiffner complete all specified and directed.

S&F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all specified and directed.

M&L for preparation of new or old wooden surfaces including filling of cavities and french polishing with two coats of polish of approved make complete all specified and directed.

REPAIRS TO TABLE DINING 4 PERSONS (DRG NO : FD-273)

M&L for removal of u/s top of table in any position, S&F new top made of 18mm thick prelaminated particle board one side laminated & other side white balancing , exterior grade, including 4mm thick teak wood beading all round, fixed in position all as shown on drg, complete all specified and directed.

All as per serial item No.10.01 above but S&F new leg made of 1st class hard wood complete all specified and directed.

All as per serial item No.10.01 above but S&F new long rail of 1st class hard wood complete all specified and directed.

All as per serial item No.10.01 above but S&F new short rail of 1st class hard wood complete all specified and directed.

All as per serial item No.10.01 above but S&F new support stiffner of 1st class hard wood complete all specified and directed.

S&F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all specified and directed.

M&L for preparation of surfaces including filling of cavities and french polishing with two coats of polish of approved make complete all specified and directed.

REPAIRS TO TABLE CENTRE (DRG NO : FD-274)

M&L for removal of u/s top of table in any position, S&F new top made of 18mm thick prelaminated particle board one side laminated & other side white balancing, exterior grade, including 4mm thick teak wood beading all round, fixed in position all as shown on drg, complete all specified and directed.

All as per serial item No.11.01 above but S&F new leg made of 1st class hard wood complete all specified and directed.

All as per serial item No.11.01 above but S&F new long rail of 1st class hard wood complete all specified and directed.

All as per serial item No.11.01 above but S&F new stiffner of 1st class hard wood complete all specified and directed.

M&L for preparation of old & new wooden surfaces including filling of cavities and french polishing with two coats of polish of approved make complete all specified and directed.

REPAIRS TO TEAPOY (DRG NO : FD-34(M), FD-278, FD-232)

M&L for dismandling, taking out carefully and replacement of old existing broken top of teapoy of any description, in any position and S&F new top of peg table of 18mm thick prelaminated particle board, exterior grade, BWR with and including 6mm thick teak wood all round beading all as shown on drg, complete all specified and directed.

All as per serial item No.12.01 above but S&F new leg of 1st class hard wood complete all specified and directed.

All as per serial item No.12.01 above but S&F new long rail of 1st class hard wood complete all specified and directed.

All as per serial item No.12.01 above before but S&F new short rails of 1st class hard wood complete all specified and directed.

S&F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all specified and directed.

Preparation of old and new surfaces of table and french polishing (two coats) with approved make polish complete all specified and directed.

REPAIR TO MISC FURNITURE AND PAINTING, POLISHING OF WOODEN AND STEEL FURNITURE

REPAIR TO CHAIR REVOLVING STEEL /CHAIR REVOLVING SENIOR EXECUTIVE / CHAIR COMPUTER REVOLVING (DRG NO TP, FD/E6/ MAP/01)

S&F in replacement cushion seat made of 50 mm thick, 32 density cushion covered with approved quality tapestry cloth complete all as specified in drawing and directed.

S&F in replacement cushion back made of 50 mm thick, 32 density cushion covered with approved quality tapestry cloth complete all as specified in drawing and directed.

S&F in replacement heavy duty Hydraulic assembly/lifting assembly for height adjustment complete all as specified in drawing and directed. Make Godrej or equivalent

S&F in replacement castor wheel complete all as specified in drawing and directed.

S&F in replacement base assembly (load bearing capicity of 100 Kg) complete all as specified in drawing and directed. Make Godrej or Equivalent

S&F in replacement PVC handle any type & shape as per existing complete all as specified in drawing and directed.

REPAIR TO CHAIR WRITING STEEL, CHAIR CB/CBA/VISITOR STEEL (DRG NO FD/E6/ MAP/12, HFD-2044/ 2045, TP)

S&F in replacement seat made of 50 mm thick, 32 density cushion covered with approved quality tapestry cloth complete all as specified in drawing and directed.

S&F in replacement back made of 50 mm thick, 32 density cushion covered with approved quality tapestry cloth complete all as specified in drawing and directed.

S&F in replacement PVC Handle any type & shape as per existing complete all as specified in drawing and directed.

REPAIRS TO CHAIR SCHOOL WITH HANDBOARD (DRG NO FD/E6/ MAP/05 )

S&F in replacement Hand board of 18 mm thick prelaminated particle board, exterior grade, including PVC beading all round fixed to frame with suitable 12 Nos nuts, bolts & washers complete all as specified in drawing and directed.

S&F in replacement polypropelene (Seat and Back) Set complete all as specified in drawing and directed.

S&F hard PVC rubber shoe/ring of superior quality with suitable screws complete all as specified in drawing and directed.

HAT STAND WITH MIRROR (DRG NO FD-233/362)

M&L for removing old/unserviceable Back ply of Hat Stands with Mirror and S&F new back ply with 6mm thick commercial ply complete all as shown in drg and as directed by Engr-in Charge.

M&L for removing broken looking mirror of Hat Stand with Mirror and S&F new looking mirror of size 440x300mm and 5mm thick with 20x50mm wooden frame complete all as shown in drg and as directed by Engr-in Charge.

M&L for removing of old/unserviceable Veneer of Hat Stand with Mirror and S&F new 4mm thick teak veneer ply complete all as shown in drg and as directed by Engr-in Charge.

M&L for removing of old/unserviceable frame beading of Hat Stand with Mirror and S&F new Frame beading alround made out of 1st class hard wood of 6x35mm size complete all as shown in drg and as directed by Engr-in Charge.

Supply and fix copper oxidised steel Pegs for Hat Stand with mirror complete all as shown in drg and as directed.

M&L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing two coat of french polish to bed hard complete all as directed by Engr -in-charge.

REPAIR TO BED HARD STEEL (MAP) (DRG NO FD/E6/ MAP/8( R))

M&L for removal of u/s ply wood of bed in any position, S&F new ply wood 12 mm thick, BWR grade, ISI marked including fixing in position with suitable size screws & cup washers, complete all as specificed and directed.

M&L for refixing of complete loose bed with welding wherever required on joints, change of old nut bolts wherever required and touching up on welding points of same colour shade and any type of work as per ground requirement for tightning of Bed Hard steel complete all as specificed and directed.

M&L for removal of u/s prelaminate particle board of bed in any position Head rest/Foot rest, S&F new Pre laminate particle board 18 mm thick, exterior grade, ISI marked including fixing in position as shown on drg / same as on ground with suitable size screws & cup washers, complete all as specificed and directed.

S&F in repairs hard PVC rubber shoe all as specified in drawing and directed by Engr-In-Charge.

REPAIRS TO TABLE COMPUTER (DRG NO FD/E6/ MAP/03, TP)

S&F in replacement table top of 18 mm thick prelaminated particle board, exterior grade, including 6mm thick teak wood beading all round; fixed to frame with suitable screws complete all as shown in drawing and directed.

S&F in replacement Drawer of size and shape as per drawing along with two telescopic chanel of best quality and shade complete all as specified in drawing and directed.

S&F in replacemen teak wood pull out tray of size and shape as per drawing along with two telescopic channel of best quality and shape complete all as specified in drawing and directed.

S&F in replacement key board tray of size and shape as per drawing along with two telescopic channel of best quality and shape complete all as specified in drawing and directed.

REPAIRS TO TABLE 900 X 600 MM WITH/WITHOUT DRAWER ( DRG NO FD-223 / FD-224 / FD-283 / FD-284)

M&L for dismandling, taking out carefully and replacement of old existing broken top of table of any description, in any position and S&F new top of table of 18mm thick prelaminated particle board, exterior grade, BWR with and including 6mm thick teak wood all round beading all as shown on drg, specified and directed by the Engineer-in-Charge.

M&L for dismandling, taking out carefully and replacement of old existing broken leg of table of any description, in any position and S&F new leg made of 1st class HW (MP teak)

All as per item No 20.02 here-in-before but long rail of frame and S&F new long rail made of 1st class HW (MP teak)

All as per item No 20.02 here-in-before but short rail of frame and S&F new short rail made of 1st class HW (MP teak)

All as per item No 20.02 here-in-before but drawer including knob 25 mm dia and S&F new drawer made of 1st class HW and aluminum anodized knob 25 mm dia all as specified and directed by Engineer-in-charge

All as per item No 20.02 here-in-before but bottom center stiffner and S&F new stiffner all as specified and directed by Engineer-in-charge

All as per item No 20.02 here-in-before but bottom side stiffner and S&F new side stiffner all as specified and directed by Engineer-in-charge

S&F new PVC hard rubber shoes of best quality for table all as specified and directed by Engineer-in-charge

S&F new bracket of size 100 x 100 x 30 mm made of 1st class HW with 04 Nos new screws of suitable size all as approved and directed by Engineer-in-charge.

Preparation of old and new surfaces of table and french polishing (two coats) with approved make polish all as specified and directed by engineer-in-charge.

REPAIR TO TABLE 3' x 3' (DRG NO FD-291)

M&L for removal / taking out carefully of old existing broken top of table in any position and S&F new top made of18mm thick prelaminated particle board one side laminated & other side white balancing , exterior grade, including 4mm thick teak wood beading all round, fixed in position all as shown on drg, specified and directed by the Engineer-in-Charge

M&L for removal / taking out carefully of old existing brokenleg of table in any position and S&F new leg made of 1st class hard wood

All as per item No 21.02 hereinbefore but top rail /side rail of 1st class hard wood

S&F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S&F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of new/old surfaces and french polishing with two coats of polish of approved make

TABLE DRESSING LADIES WITH MIRROR (DRG NO FD-32 (M)/ 251/378)

M&L for removing old u/s looking mirror and S&F new looking mirror of size of mirror 1220 x 380 x 5 mm frame made out of teak wood of 25 x 6 mm thick & 6mm thick commercial ply on back of mirror & frame duly polished complete all as directed by Engr-In-Charge

M&L for removing old lower box and S&F new Lower box made out of Prelaminated particle board with drawer and sliding glass complete all as per drawing and directed by Engr-In-Charge. (back shall be 06 mm thick ply)

REPAIRS TABLE WRITING (DRG NO FD-275)

M&L for removal of u/s top of table in any position, S&F new top made of 18mm thick prelaminated particle board one side laminated & other side white balancing , exterior grade, including 5mm thick teak wood beading all round, fixed in position all as shown on drg, specified and directed by the Engineer-in-Charge

M&L for removal of u/s leg of table in any position and S&F new leg made of 1st class hard wood complete all as specified and shown on drawing.

All but 23.02 above but top long rail made of 1st class hard wood

All but 23.02 above but top short rail made of 1st class hard wood

All but 23.02 above but bottom short rail made of 1st class hard wood

All but 23.02 above but bottom stiffner made of 1st class hard wood

M&L for removing old u/s drawers and S&F new drawers complete all as specified & shown in drg.

M&L for removing old u/s cabinet (box) and S&F new cabinet (box) complete all as specified & shown in drg.

M & L for preparation of surfaces including filling of cavities and french polishing with two coats of polish of approved make all as specified and directed

REPAIRS TO CHAIR TUBULAR STEEL WITH ARMS (DRG NO 'FD-75 (M))

M&L for one coat of synthetic enamal paint OG to Chair tublar steel with arms after preparation of old painted surfaces by applying sand paper and filling with putty where ever required all as specified & directed by Engr-in-charge.

S & F new flat iron 25x3 mm of required length for extra strength to Chair tubular steel, shall be welded with frame of chair CB Steel with arms complete all as specified and directed by Engr-in-Charge.

Removing of unserviceable seat from existing Chair tublar steel with arms and S&F new seats made out of 2nd class hard wood (Shisham) (Well seasoned) duly black polished including cane work 2 mm plastic can half rounded and 3.5 mm for paremeter work Godraj pattern all as specified and directed by Engr-In-Charge.

Removing of U/S back from existing Chair tublar steel with arms and S&F new back made out of 2nd class hard wood (Shisham) (Well seasoned) duly black stove polished including cane work 2 mm plastic can half rounded and 3.5 mm for paremeter work Godraj pattern all as specified and directed by Engr-In-Charge.

Removing of U/S broken arms from existing Chair tublar steel with arms and S&F new arms made out of 1st class hard wood teak (Well seasoned) duly black stove polished fix with screw steel all as specified and directed by Engr-In-Charge.

S & F new hard PVC rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed.

REPAIRS TO BIN LINEN MULTIPURPOSE (DRG NO FD/E6/MAP/09)

M&L for removal of u/s top and S&F new top made of 18mm thick prelaminated particle board one side laminated & other side white balancing , exterior grade, fixed in position all as shown on drg, complete all as specified and directed by the Engineer-in-Charge

All as per item No 25.01 above but S&F new shutter of bin linen multipurpose complete all as specified and directed.

All as per item No 25.01 above but S&F new side of bin linen multipurpose complete all as specified and directed.

All as per item No 25.01 above but S&F new drawers of bin linen multipurpose complete all as specified and directed.

All as per item No 25.01 above but S&F new chromium plated handles of 100 mm long for shutters/ drawers of bin linen multipurpose complete all as specified and directed.

All as per item No 25.01 above but S&F new shelves of bin linen multipurpose complete all as specified and directed.

M&L for removing old u/s back and S&F new back 6mm thick plywood BWR grade, fixed in position complete all as specified & shown in drg.

All as per item No 25.01 above but S&F new base support of bin linen multipurpose complete all as specified and directed.

REPAIRS TABLE BED SIDE (DRG NO FD/E6/MAP/15(R))

M&L for removal of u/s top of table in any position, S&F new top made of 18mm thick prelaminated particle board one side laminated & other side white balancing , exterior grade, including 5mm thick teak wood beading all round, fixed in position all as shown on drg, specified and directed by the Engineer-in-Charge

All as per item No 26.01 above but S&F new side of table bed side complete all as specified and directed.

M&L for removing old u/s back and S&F new back 6mm thick plywood BWR grade, fixed in position complete all as specified & shown in drg.

All as per item No 26.01 above but S&F new body drawer of table bed side complete all as specified and directed.

All as per item No 26.01 above but S&F new chromium plated handle of 100 mm long of table bed side complete all as specified and directed.

All as per item No 26.01 above but S&F new MS square pipe of pre treated with epoxy polyster powder coating all as per existing pattern of table bed side complete all as specified and directed.

S&F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M&L for Preparation of old surface by cleaning with emery paper and applying one coat of French polish/ Varnish complete all as directed by Engr in Charge for the following items :-

Bed plywood (DRG NO FD-246)

Board notice 6 x 4 ( DRG NO FD-99)

Chair dining (DRG NO FD-279)

Chair Dining Cushioned (MAP) (DRG NO FD/E6/ MAP/10(R)

Chair easy (DRG NO FD-229)

Chair writing (DRG NO FD-280)

Hat stand w/mirror (DRG NO FD-233)

Peg table (DRG NO FD-277)

Stool dressing (DRG NO FD-282)

Sofa set 5 seater (DRG NO FD-281/373)

Sofa set 4 seater DRG NO FD-281/373)

Table dining for 4 persons (DRG NO FD-273)

Table dining for 6/8 persons (DRG NO FD-273)

Table writing (DRG NO FD-275)

Table centre (DRG NO FD-274)

Table 600x600mm (DRG NO FD-230)

Table dressing gents with mirror (DRG NO FD-238)

Table dressing ladies with mirror (DRG NOFD-32 (M)/ 251/378)

Teapoy (DRG NO FD-384)

Table 900 x 600 x 760 (DRG NO FD-283)

Preparing the old painted surfaces of the following steel furniture by removing old paint and touching up with red oxide primer where necessary and denting wherever necessary, and Painting with one coat of synthetic enamal paint as per existing colour of articles with spray gun completeall as specified and directed by Engr-In-Charge :-

Almirah large steel (DRG NO FD-1031)

Almirah map steel (DRG NO FD-1033)

Almirah med/small steel (DRG NO FD-1032)

Book Shelf Open Large Steel (DRG NO FD-69M)

Book Shelf Open Small Steel (DRG NO FD-69M)

Locker bed side steel (DRG NO FD-1029)

Rack Shoe Steel (DRG NO FD/E6/ MAP/2)

Rack 6 tier steel (DRG NO FD-106(M)

Table office officers steel (DRG NO FD-1003)

Table office Clerk steel (DRG NO FD-1004)

Table with drawer 900 x 600 x 760 mm (Steel frame Partical board top) (DRG NO FD-1008)

Note:- The contractor has to arrange execution of certain misc petty repairs/ painting/ polishing work at work site under AOR of BSO Bhopal which includes entire area of Bairagarh Cantt and SI lines Cantt. Necessary transportation charges to carry manpower and required stores shall be deemed to be included in the rate quoted by the contractor. However all the major repair work shall be carried out at BSO yard only.

Deduct schedule of credit (calculation will be done off line) Rs. 153090.00

Budget Furniture Industries

M/S Shanti Enterprises

S Balwinder Singh

Veer Brothers

SUNIL ENTERPRISE