Providing road and drainage facilities to the Anu Garden and Kennedy Nagar at Ariyankuppam east village Panchayat in ACP

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as per direction of Engineer-in-charge , within a lead of 50m - all kinds of soil

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. - Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.- in cement mortar

Disposal of debries / surplus excavated earth including loading, unloading and conveyance to low lying areas with in 2km lead as directed by the Engineer-in-charge.

Centring and shuttering including strutting, propping etc. and removal of form work for - foundations, footings, bases for columns

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 fine aggregate : 10 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:3:6 (1 cement : 3 fine aggregate : 6 graded stone aggregate 20mm nominal size)

6mm cement plaster of mix 1:3 (1 cement : 3 fine aggregate)

Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Removal of unserviceable soil including excavation, loading and disposal upto 1000 m lead but excluding replacement by suitable soil which shall be paid separately as per Clause 305

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 fine aggregate : 4 graded stone aggregate 20mm nominal size)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth three wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum / gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-I with Gravel screening. (As per MoRTH specification, 4th Revision)

Fabrication, supply and fixing of village/informatory name board of size 1.06mts x 0.61 mts. The width of the board is tapered at 0.80 mts upto 1.06 mts to give the triangular shape at one end with high intensity reflective sheeting of required color encapsulation on aluminium sheet of not less than 2 mm thick suitably supported and framed with 25 mm x 25 mm x 3 mm AISI 316 grade stainless steel angle and the board frame is supported alround with AISI 316 grade stainless steel pipe of 38.10 mm dia (outer dia & 2 mm wall thickness). The village names/ street names, lettering and symbols will be provided by High Intensity grade white sheeting. The board is supported by Two Nos. of 63.5 mm dia post S.S pipes for 2.0 mts height with same dia dummy plate arrangement at the top. The board frame and post pipes are welded by Tig welding with necessary polishing etc, and M.S pipe of 50 mm dia for a length of 35 cm will be welded at the bottom of the posts and fixed in a ground pit of size 0.45 x 0.45 x 0.45 mts with P.C.C 1:2:4. Rate including all the materials, S.S welding, grinding, polishing, fabrication charges, conveyance etc. except earth work and P.C.C charges, complete

S Anandhan (BID ID -52819)

N Vazhumuni (BID ID -52778)

C MURUGAN (BID ID -52648)

N Sakthivelu (BID ID -52772)

M Thiagarajan (BID ID -52703)