Expansion of civil enclave at Gwalior airport. SH- Shifting of power house and ancillary operational services (Electrical Works).

Amount

SH-I: Supply of DG Set, AMF Panal and LT Panal, SITC of ‘Silent Type’ Diesel Generating set, having Prime Power Rating of 160 kVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor.DG shall have necessary generator control module / controller and shall be complete in every way with RS 485 module. The DG shall be consisting of the followings: Diesel Engine : Diesel engine of 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. Engine mounted Instrument Panel fitted with and having digital display for following : (i) Start-stop switch with key. (ii) Water temperature indication. (iii) Lubrication oil pressure indication. (iv) Lubrication oil temperature indication. (v) RPM indication. (vi) Over speed indication. (vii) Low lub. Oil trip indication. (viii) Engine Hours indication. Alternator: Synchronous alternator rated at 160 kVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self regulated through AVR conforming to IS:4722/BS 2613 suitable for tropical conditions and with class- F/H insulation. Base Frame & Foundation : Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on existing cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Fuel tank : Providing and Installing external service fuel tank of of 900 Ltr. of MS material. Exhaust System : Dry exhaust manifold with residential exhaust silence and catalytic convertor as per OEM. Starting System : 12/24V DC starting system comprising of starter motors, voltage regulator and arrangement for initial excitation complete with suitable nos of batteries as required as per specifications and recommended by OEM. Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications. Works includes complete SITC Job including required civil foundation as per O.E.M guidelines like providing C chanel and RCC work etc. as per site requirement and as per Instruction of E-I-C.

Supplying and fixing exhaust gas piping extension of suitable dia. for 160 KVA DG Set welded black MS, C Class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti-vibration mountings,SS Braided Rubber expansion bellows , insulation of exhaust system with 50mm thick mineralwool/ glasswool/Rockwool insulation (of 46 kg per cubic meter density), covered with wiremesh & aluminum cladding etc. as required as per specifications

Providing & fixing 25 mm dia MS C class fuel piping from day oil tank to engines, inter connecting piping between the tanks, main piping from outside for tanks filling complete with bends etc as required :

Providing & fixing 20 mm Dia MS C class fuel piping from day oil tank to engines, inter connecting piping between the tanks,main piping from outside for tanks filling complete with bends etc as required :

Providing & fixing 25 mm dia Gate valve for MS C class fuel piping from day oil tank to engines, inter connecting piping between the tanks, main piping from outside for tanks complete etc as required :

Providing & fixing 20 mm dia Gate valve MS C class fuel piping from day oil tank to engines, inter connecting piping between the tanks, main piping from outside for tanks complete etc as required :

Dismantaling, shifting, re - Installation, testing and commissioning of existing 160 KVA DG set along with AMF panel, etc. from its existing location to new location including making of required foundation for DG Set complete as per site requirement and as per direction of EIC.

Dismantaling, shifting, re - Installation, testing and commissioning of existing 30.2 KVA DG set along with panel, etc. from its existing location to new location including making of required foundation of DG Set complete as per site requirement and as per direction of EIC.

Dismantaling shifting, re - Installation, testing and commissioning of existing 500 KVA Transformar etc. from its existing location to existing foundation at new location of complete as per site requirement and as per direction of EIC.

Dismantaling shifting, re - Installation, testing and commissioning of existing 4 kw CCR etc. from its existing location to existing foundation at new location complete as per site requirement and as per direction of EIC.

Dismantaling shifting, re - Installation, testing and commissioning of existing 22 hp, 3 phase Moter etc. from its existing location to existing foundation at new location complete with existing pipe, valves, header pipe etc as per site requirement and as per direction of EIC.

Dismantaling shifting, re - Installation, testing and commissioning of existing 3.5 hp, 3Phase Moter etc. from its existing location to existing foundation at new location complete with existing pipe, valves, header pipe etc as per site requirement and as per direction of EIC.

Overhauling, Servicing and Testing of 500 KVA 33 KV/440 V Transformer by OEM or authorised service agency of OEM including resistance test, Voltage Ratio & Continuity test, Magnetic Balance Test, vector Group Test, after oil filteration or replacement of oil if required for satisfactory working condition and submit the report complete etc as required.

(B) SH- II: Cable Works Supply of 110 mm outer Dia PN 80 HDPE pipe suitable for minimum pressure of 6 Kgf/cm2 for laying in ground as per IS 4984/95 duly ISI marked along with all accessories like socket, bend, couplers, seal rings, including jointing of required length etc complete as required.

Supply of LT Power cable of 1.1 KV of following Size Alu. Conductor XLPE insulated PVC sheathed armoured cable confirming to IS:7098 Part - 1988 with upto date amendment as required. 3.5 C X 240 Sqmm

Supply of LT Power cable of 1.1 KV of following Size Alu. Conductor XLPE insulated PVC sheathed armoured cable confirming to IS:7098 Part - 1988 with upto date amendment as required. 3.5 C X 185 Sqmm

Supply of LT Power cable of 1.1 KV of following Size Alu. Conductor nXLPE insulated PVC sheathed armoured cable confirming to IS:7098 Part - 1988 with upto date amendment as required. 3.5 C X 95 Sqmm

Supply of LT Power cable of 1.1 KV of following Size Alu. Conductor nXLPE insulated PVC sheathed armoured cable confirming to IS:7098 Part - 1988 with upto date amendment as required. 4 C X 25 Sqmm

Laying of HDPE pipe upto 110 mm dia in ground upto depth of 1.5 MTR along with all accessories like socket, bend, couplers, seal rings etc. by HDD method for laying of cables pipes etc complete as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Cable of following size in the existing RCC/ HUME/ METAL/DWC HDPE pipe as required up to 35 Sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Cable of following size in the existing RCC/ HUME/ METAL/DWC HDPE pipe as required Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Cable of following size in the existing RCC/ HUME/ METAL/DWC HDPE pipe as required Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Cable of following size in the existing RCC/ HUME/ METAL/DWC HDPE pipe as required Above 185 sq. mm and upto 240 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade cable of follwing size in the existing masonry open duct as required. up to 35 Sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade cable of follwing size in the existing masonry open duct as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade cable of follwing size in the existing masonry open duct as required. Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade cable of follwing size in the existing masonry open duct as required. Above 185 sq. mm and upto 240 sq. mm

Laying of HDPE Pipe upto 110 mm dia size direct in ground up to depth of 75mm including excavation and refilling the trench etc as required.

Supplying of installing of size 300mm Width x 50 mm depth x 1.6 mm thicknees perforated hot dipped galvanised iron cable tray cable withperforation not more than 17.5% in conveninet sections,joined with connectors suspended form the celling with G.I suspenders including G.I bolts & nuts etc as required

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 C X 240 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 C X 185 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 C X 95 sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 25 sqmm

Earthing Earthing with Copper Earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm Copper . strip in 40 mm dia G.I.pipe from earth electrode including connection with G.I. nut, bolt,spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm Copper strip on surface or in recess for connections etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe from earth electrode including connection with G.I. nut, bolt,spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

supply and fixing of nominal 2 mm +/- 10 % thick 1000 mm wide Antistaic Electric insulated Synthetic Mat confirming to is 15652 : 2006 with up to date amendment suitable for 3.3 kv installation along with resin sealing material and similar type of taping on sealing at all joints and corners as per recommendations etc as per required

Supplying of Rubber hand glove suitable for 33 KV grade

Supplying and fixing of shock treatment chart both in hindi and english and framed with 5 mm thick glass as required

Supply of First aid box containing material as prescribed by St. John Ambulance brigade or indian Red cross complete as required

Supplying and fixing of Mechanical foam stored preaaure type fire extinguisher 4.5 kgs capacity of approved make with wheeled trolley as required conforming to IS 15683

Supplying of fixing of 04 Nos fire bucket set painted red and dully filled sand with M S stand suitable for supporting four buckets conforming to IS 2546-1974

Proving and fixing M V danger notice plate of 200mm x 150 mm made of mild steel at least 2mm thick and vitreous enameled white on both side , and with inscription in single red colour on front side as required

Provding and fixing H T danger notice plate of 250 mm x 200 mm made of mild steel at least 2mm thick and vitreous enameled white on both side , and with inscription in single red colour on front side as required

Wiring for light point/ Fan Point/exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sqmm. FRLS PVC insulated copper conductor single core cable etc including all fitting and accessories as required.

Wiring for group controlled (looped)light point/ Fan Point/exhaust fan point/ call bell point ( without independent switch etc.)with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sqmm. FRLS PVC insulated copper conductor single core cable etc including all fitting and accessories as required.

Wiring for power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. MCB should be provided separately.

Supplying and fixing suitable size GI box with ( 3 module) modular plate and cover in front on surface or in recess, including providing and fixing 1 nos.6 pin 6/16 A modular socket outlet and 1 nos.15/16 A modular switch, connections etc. as required

Supply,Installation,testing &commissioning of 5 star BEE rated ,ISI marked energy efficient sweep ceiling fan with double ball bearing , motor ,blades , down rod , canopies , capacitor etc .Suitable for operation on 230 volts , 50 Hz. , single phase , AC supply complete as required of and as per specifications attached (1200mm Sweep) .Including step type 2 Module heavy duty ceiling fan regulator.

Supply, Installation, Testing & Commissioning of Exhaust Fan 450 mm sweep in the opening including making the hole to suit the size of the above fan including Louvers / Shutters with Frame making good the damages etc as reqired.

Supplying and fixing 4 Way (4+12) double door, horizontal type three pole and neutral, sheet steel, dust protected, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing , of 5 A to 32 A rating (Single pole) MCB, 240/415 V, 10 kA size “C” curve, miniature circuit breaker/MCB suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing , of FP MCCB 100 A, 415 V ,30 KA size “C” curve, miniature circuit breaker/MCCB suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required FP MCCB 100 A, 415 V ,30 KA

Supply of 5 HP, 3 Ph, 26 m Head, Discharge 9 LPS, ISI marked, openwell submersible pump set suitable for three phase 415 volts, 50 Hz supply complete as required. (Make: Kirloskar; Model No. KOS or equivalent)

Supply of Direct on line starter with over load protection, dry run protection, single phase preventer, Volt meter, Ammeter and suitable to operate 3 - 5 HP submersible pump set etc. complete as required. (Make: L&T Model No. MU-G or equivalent).

Supplying, fixing, testing and commissioning of dual plate spring operated butterfly valve with CI Body, Epoxy coated Disc duly ISI marked complete with Nuts, Bolts, Washers, Neoprene rubber gaskets, conforming to IS: 13095, of following sizes as required. 100 mm.

Providing, laying, testing & commissioning of 100 mm. Dia 'C' class heavy duty M.S. Pipe conforming to IS 1239 direct in ground (75 cm below ground level) including excavation and refilling the trench including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. in ground including providing of suitable size and cement concret blocks support of 400mmx 400mm x 150mm size ,clamp, including cutting & proper connection in existing line etc complete as required as per special condtion of contract .

Providing, laying, testing & commissioning of 100 mm. Dia 'C' class heavy duty M.S. Pipe conforming to IS 1239 in existing trenches/above the ground ,wall, above the false ceiling including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets, painting etc. including providing hanging MS support ,clamp, including cutting & proper connection in existing line etc complete as required as per special condtion of contract .

Providing anti-corrosive protection treatment to embaded MS pipe & fitting by applying anti corrosive bituminous primer thereafter wrapping 4mm thick pypekote /Coatek with 15mm overlapping complete as per spesification.(100 mm dia pipe)

Dismantling of 100 mm dia MS pipe along with cuting in pieces including excavation if any, transportation from site to AAI store house etc complete as required.

Dismantling of 80 mm dia MS pipe along with cuting in pieces including excavation if any, transportation from site to AAI store etc complete as required.

Supplying of channel iron 100 mm X 50 mm X 6 mm (9.56 kg per metre) V shape cross arm for two 33 KV over head line conductors complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts, washers etc and painting with primer and finish paint as required.

Supplying of two lengths of channel iron 100 mm X 50 mm X 6 mm (9.56 kg per metre) double pole cross arm for three wire 33 KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts, washers etc and painting with primer and finish paint as required.

Supplying and erection of 33 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Supplying and erection of a set of three 11 KV disc insulator for 33 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of single piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.

Supply of 152 x 152 mm (37.1 kg per m) H- Beam 11 mtr long

Supply of H-Beam clamp 33kv

Supplying and erection of single piece 600 Amp triple Pole outdoor type isolater with expulsion or horn gap fuse down rod, handle etc. complete. The isolater should be two stack and three legs per face and as per relevant ISS and complete with galvanized clamping arrangement, GI bolts, nut washer etc as required. (a)33 KV DO fuel switch (set of three number)

Supplying and erection of single piece 400 Amp triple Pole outdoor type Drop out switch with fuse as per relevent ISS and complete galvanized clamping arrangement, GI bolts, nut washer etc as required. (a) 33 KV DO fuel switch (set of three number)

Supplying and erection of approved make 100 sqmm a covered conductor with stringing making of complete with binding at existing insulators jointing, jumping teeing of connecting wherever required except as required aluminium 7 AAAC covered conductor.

Supply and painting of 4 pole structure with one or more coat of spray painting with synthetic enamel aluminium paint of approved brand and manufacturer to give an even shade, including cleaning of surface with detergent etc. as required

Awasthi Electric Works

Aditya Techno Products Private Limited

Manish Electricals