SPECIAL REPAIR TO BLDG NO 25A OFFRS MESS OF HQ 36 RAPID

Amount

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding, removal servicable tiles from site and rubbish off the premises, all as specified and directed.

Demolition of cement concrete un-reinforced in ground floors and paving n exc 15cm thickness below or above GL.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels incl finished even and smooth with using extra cement as in plinth protection incl necessary form work to edges and filling of joints with bituminous sealing compound .

M&L for 100 mm thick cement concrete type D-2 (1:4:8) (Using 40 mm graded crushed stone aggregate ) as in sub base

M&L for 40mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in levelling course of sub base

Excavation over area s , n exc 1.5 m deep and getting out soft/loose soil

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in any type of soil for shafts, wells, manholes etc n exc 10 Sqm on plan for sewage line & foundation etc all as specified and directed by Engr-in-charge.

Moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and rammed including watering

M & L for broken stone or boulders hard core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface

Removal of surplus soil/excavated material to a distance n exe 50m and deposited where directed at a level n.exc 1.5 m above the starting point etc complete all as specified and directed

Returning filling in incl, spreading, leveling, watering and well ramming in layers n exc 25cm thick all as specified and directed by Engr-in-charge.

Demolition of brick work or stone/ boulder masonary, built in cement mortar incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing rubbish not exc. 50m

M&L for forming jambs, etc to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, in cement mortar 1:6 complete

M&L for dismantling unframed timber scantlings 40 sq. cm & over in section, in any position

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15 mm thick on stone masonary surface or surface other than fair face of brick-work in 1:6 and finished even and smooth with out using extra cement

M&L two coats cement plaster ,first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement. Note: WPC shall be measured & paid separetely under Item No 19.00.

Supply only WPC

M & L for applying birla/J.K wall care white putty 2mm thick for levelling the surface and two coats exterior weather coat ( Apex paint or equivalent) over one coat of exterior primer over newly plastered surfaces of walls ,chajjas, complete all as specified and directed by Engr-in-charge. Make: Asian Apex or equivalent as approved by the GE. NOTE: Thickness of putty will be as per manufacturer instruction.

M & L for complete removal of existing treatment mechanically and applying two coats exterior weather coat ( Apex paint or equivalent) over one coat of exterior primer, including properly making of v shape crakes and filling of all crakes with crakes seal incl. preparation of surfaces of old decorated walls etc complete all as specified and directed by Engr-in-charge. Make: Asian Apex or equivalent as approved by the GE. NOTE: Thickness of putty will be as per manufacturer instruction.

M & L for complete removal of existing treatment mechanically and applying birla/J.K wall care white putty 2mm thick for levelling the surface and two coats exterior weather coat ( Apex paint or equivalent) over one coat of exterior primer,including properly making of v shape crakes and filling of all crakes with crakes seal incl. preparation of surfaces of old decorated walls etc complete all as specified and directed by Engr-in-charge. Make: Asian Apex or equivalent as approved by the GE. NOTE: Thickness of putty will be as per manufacturer instruction.

M&L for applying two coats of plastic emulsion asian Royal or equivalent, white or tinted over a coat of wall primer and applying birla / J. K. wall care white putty 2mm thick for levelling the surfaces on new wall surface including preparation of surface. NOTE: Thickness of putty will be as per manufacturer instruction.

M & L for complete removal of existing treatment mechanically and applying birla / J. K. wall care white putty 2mm thick for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coats of plastic emulsion asian Royal or equivalentr over a coat of wall primer incl. preparation of surfaces of walls etc complete. NOTE: Thickness of putty will be as per manufacturer instruction.

M&L for two coats of distempering on old decorated surface of celing with synthetic emulsion distemper incl preparation of surfaces of old surfaces all as specified and directed.

S&F vitrified ceramic tiles dark shade ultra charged 10mm thick square /rectangular polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm(800 x 800 ) in floors etc set and jointed in neat cement slurry and pointed in whith or cloured cement to match with 3 mm thick spacer joint and coloured apoxy grout to match the tiles over and including 15 mm thick screed bed in CM 1:4 all as specified and directed. Make: Somany (Tribeca Gold) or equivalent as approved by the GE.

Ditto all as per ser item No. 26 above but as in skirting over and including 10 mm thick rendering in cement mortar 1:3 all as specified and directed Make: Somany (Tribeca Gold) or equivalent as approved by the GE.

S&F vitrified ceramic tiles dark shade ultra charged 8 to 10 mm thick square /rectangular polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm (800 x 1200) in floors etc set and jointed in neat cement slurry and pointed in white or cloured cement to match with 3 mm thick spacer joint and coloured apoxy grout to match the tiles over and including 15 mm thick screed bed in CM 1:4 all as specified and directed. Make: Somany (Fusion Ivory) or equivalent as approved by the GE.

Ditto all as per ser item No. 28 above but as in skirting over and including 10 mm thick rendering in cement mortar 1:3 all as specified and directed Make: Somany (Fusion Ivory) or equivalent as approved by the GE.

M&L for glazed ceramic coloured elevation wall tiles of size 300x 450mm, 8 mm thick,joint free, Rustic collection, Nova clad or equivalent on vertical surfaces such as skirting/dado etc, fixed, set and jointed in neat cement slurry and pointed in white/ coloured cement to match over 10 mm thick rendering in CM 1:3 complete .

S&F Coloured Non Skid ceramic tiles 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4)

M&L for glazed ceramic coloured wall tiles of size 600x 300mm, 7 to 8 mm thick,joint free reflecto series or equivalent , on vertical surfaces such as skirting/dado etc,fixed with 3 mm thick spacer joint, set and jointed in neat cement slurry and pointed in white/ coloured apoxy grout to match over 10 mm thick rendering in CM 1:3 complete .

S&F coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.06 sqm and n. exc. 0.11 sqm joint free (rectified) ) as in floor fixed with 3 mm thick spacer joint ,set & jointed in neat cement slurry and pointed in white /coloured apoxy grout to match over 15 mm thick screed bed in CM 1:4 complete.

M & L for glazed ceramic tiles of size 450x 300 x 7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match over 10 mm thick rendering in CM 1:3 complete .

S&F coloured anti skid ceremic designer Endura tiles 12 mm thick of size 300 x 300mm joint free as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match over 15 mm thick screed bed in CM 1:4 complete etc.

Dismantling of wall ceiling board (fibre, pulp, insulation etc) or insulation board/ slab/ blankers,any thickness ,including cover fillets complete all as specified and directed.

S & F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl 2 mm GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F white Non Asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed.

M&L for gypsum boards in suspended system ceiling as in flat or vertical step up or down pattern with providing for cove (GS-MFSC-4.1) including GI perimeter channel of size 0.55 mm thick (having one flange of 20 mm and another flange of 30 mm and a web of 27 mm ) along with perimeter of ceiling, screw fixed to brick wall with partition with the help of nylon sleeves and screws at 610 mm centre to centre. Then suspending GI intermediate channel of size 45 mm (0.9 mm thick with two flanges of 15 mm each) from the soffits ot 1220 mm centres with ceiling angle of width 25 mm x 10 mm x 0.55 mm fixed to soffits with GI cleat and steel expansion fasteners. Ceiling section of 0.5 mm thickness having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10. 5 mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457 mm centres to centres, 12.5 mm tapered edge gypsum boards (conforming to IS 2095 –1982) is then screw fixed to ceiling section with 25 mm dry wall screws at 230 mm centres to centres.Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. The board are to be jointed and finished the tapered and square edges of the board with jointing compound, joint paper tape and applying two coats synthetic distemper over a coat of primer suitable for Gypsum board complete. (surface area of Gypsum board will be measured)

M&L for glass fiber reinforced,gypsum /POP 12mm thick architectural cornices,mouldings ,cornices as per design and pattern approved by GE, size not less than (80x80mm) complete all as aspecified and dircted.

M&L for glass fiber reinforced, gypsum /POP architectural beadings as per design and pattern approved by GE, size not less than (35 x 25mm) complete all as aspecified and dircted.

Taking down chowkhats or frames with shutters (w/o taking of shutters from the frame) n. exc 1.50 Sqm each complete .

Taking down chowkhats or frames with shutters (w/o taking of shutters from the frame) exc 1.50 but n exc n.exc 4 Sqm each complete .

Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

M&L for preparing surface of wood and wood based material new or old but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each and treated with tar or coal tar black paint.

S&F mild steel hold fasts, plain angle cleats for securing purlins ,and similar small articles conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F 1st class hardwood teak Plain any size and thickness, solid, straight,as in chowkats frames, wrought, framed single or double rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed by Engr-in-charge.

S&F 1st class hardwood teak Plain any size and thickness, solid, straight,as in door and window shutters wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including necceary fixing arrangement for glass or wiremess with decorative teak wood leaping all as specified and directed by Engr-in-charge.

M&L for two coats lacquer polishing on wooden surfaces of any description, width or girth of door ,window frame or shutters including preparation of new surface with suitable treatment all as specified and directed by Engr-in-charge.

S&F 12 mm thick toughened glass with frosted film as in door, fixed in wooden frame with teak wood beading including all fancy type CP fittings such as handles,floor spring ,locks and all necessary fittings as directed by Engr-in-charge and Make as approved by GE (Wooden frame will be measured separately)

S& F glazed 6 mm thick toughened glass with frosted film fixed in wooden frame with teak wood beading and alll necessary fixtures with incl. necessary joining cleats , glazing clips etc complete all as specified and directed by Engr -in-charge. (Wooden frame will be measured separately)

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples.

S&F 1st class hardwood teak decorative moulding fixed in door and window frames sectional area exc 8 sqcm but n exc 13 sqcm all as specified and directed by Engr-in-charge.

S&F Brass handles 100mm size, cast type, polished bright.

S&F brass gate and shutter ,hooks and eyes 150 mm size all as specified and directed

S&F Butt hinges 75mm size, extruded brass,with mild steel hinge pin, bright polished, type B-11.

S&F Brass barrel tower bolts100mm long, with cast or sheet barrel & rolled or cast bolts.

S&F butt hinges ,cast brass ,with mild steel hinge pin ,bright polished and fixed ,type B-11 size 100mm all as specified and directed.

S&F Brass handles 150mm size, cast type, polished bright.

S&F Brass, sliding door bolt 375 mm long 16 mm dia with sand or die-cast brass hasp, staple (bolt type) & fixing bolt with rolled or drawn brass bolts.

S&F brass skeleton tower bolt 375 mm long 10 mm dia with cast brass plate and staples and rolled or drawn brass bolt and fixed all as specified and directed.

S& F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and lock rail size is 83 x 44.45x 1.87 mm , & bottom rail size is 100 x 44.45x 2mm mm & style of door shutter is 85mmx 44.45 x 2mm mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor door stopper incl. necessary joining cleats , glazing clips and floor springs etc complete, confirming to IS. Make - Jindal Aluminum / Man Industries or equivalent as approved by GE.

S&F for Winpire 3 track pre painted steel sliding window 3-track, 2glass panel and 1 mesh panel ,sliding window fabricated from roll formed section made of galvanized steel colour coated/powder coated (base steel as per IS 513 D quality galvanized as per IS 277 with Zinc of 120gm/sqm ) with total coated thickness of 0.58mm primer coat with epoxy primer of 5-7 micron thick ,finish painted with a polyester paint of 12-16 micron thick and back coated with alkyd backer of 5-7 micron or powder coated with pure polyester up to 50-60 micron thick. section for external frame should be off 107X44 mm, section of shutter should be of 35 x 49 mm. section of mesh should be 35 x 49 mm . the window should be paneled with 5mm thick plain flot glass and stainless steel wire cloth with 0.36mm nominal dia of wire and average width of aperture 1.18mm. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM) . The sections are to be cut to length, join and assembled by mean of corner bracket . The above frames should be fixed to the concrete/ masonary wall by means of self expanding screws. all as specified and directed by Engr-in-Charge. Make: NCL ALLTEK & SECCOLOR LTD or equivalent as approved by the GE.

S&F for mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), clamps; hold fasts, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165.

S&F MS framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors etc conforming to Fe 410-O or Fe 310-O.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in , coping, benching and other similar work with weathering slightly rounded edges and throating etc as req with and incl all necessary form work all as specified and directed by eng-incharge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Steel work in purlins/rafters/posts with round/rectangula/ square hollow mild steel section all as specified and directed. Note: Weight shall be verified by the GE.

S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Note: Weight shall be verified by the GE.

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 5 to 10mm.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.

M&L One coat of synthetic enamelled paint on old painted steel based surface of any desription over 10cm width or girth incl preparation of surfaces such as removing all splashes, drops, dirt, etc.

Extra for forming fair finished drain or channel 30 cm inner girth in cement ,including forms ,moulds mitred/stopped ends etc.

M&L for PCC 1:2:4 type B2 (Using 40mm graded crushed stone aggregate) as in mass concrete in surface channel and drain incl forming fair finished cement concrete with using extra cement complete

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet prelam on the front face & 5 mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed by engr-incharge

S&F 200 Aluminium anodised, barrel tower bolts of extruded section and fixed.

S&F 150 mm long aluminium handles cast type anodised etc all as specified.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled stainless steel.

M&L for GI wire netting 0.90mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls, ceiling, stanchions, beams, etc. including all laps, cutting and waste

Supply and fixed 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc all as specified and directed.

M&L for rounding/ chamferring and polishing to edges of granite stone slabs one edge , such as in steps , cooking plateform,window cill and other similar situations etc all as specified.

Supply and fixed 18-20 mm thick Granite of any shade ( table rubbed and polished) 40 mm wide strip fixed with multi colour stone brasso strip to be fixed with granite cladding stone with suitable adhesive all as specified and directed.

S&F in repair 25 mm bore stainless steel drapery rods 1 mm thick, suitable for door/widows curtain with fancy type stainless steel dooms with ss brackets fitted to each end and fixed to wall incl complete.

Taking down 15 mm dia GI tubing and connection complete .

Taking down 20 mm dia GI tubing and connection complete.

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed.

Refixing old 15mm GI tubing and connection in new or old position ( wall, floor, wall etc ) .

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed'

Refixing old 20mm GI tubing and connection in new or old position ( wall, floor, wall etc ) .

Cutting chases, pinning in, in brick wall for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repair vitreous china floor mounted closet single piece P or S trap colour white or Ivory of size 720X390X840 mm complete with connecting all fitment including UF seat cover with all accessories of jaquar cat no-VGS-WHT-81851P or equivalent all as specified and directed.

S&F in repair vitreous china table top basin of size 360X510X120 jaquar cat no- FLS-WHT-5931or equivalent and half pedestal jaquar cat no- CNS-WHT-305or equivalent colour white or Ivory complete with connecting all fitment including CP waste coupling ,waste pipe etc all as specified and directed.

S&F in repairs Pillar cock chromium plated brass of jaquar cat-no- ORP-CHR-10001PM or equivalent all as specified and directed.

S&F in repairs angular stop cock with wall flange chromium plated brass of jaquar cat-no- ORP-CHR-10053 PM or equivalent all as specified and directed.

S&F in repairs Two way bib cock with wall flange chromium plated brass of jaquar cat-no-ORP-CHR-10041 PM or equivalent all as specified and directed.

S&F in repairs Toilet paper holder with flap chromium plated brass of jaquar cat-no- AKP-35753P or equivalent all as specified and directed.

S&F in repairs soap dispenser with glass bottle chromium plated brass of jaquar cat-no- AKP-35735P or equivalent all as specified and directed.

S&F in repairs hand shower (health focet) with 1 metre long easy flex tube with wall hook chromium plated brass of jaquar cat-no- ALD-CHR-565 or equivalent all as specified and directed.

S&F in repairs 450mm long braided hose with M10X1 nipple,15 mm nut,o-ring &rubber washer (suitable for basin mixers) chromium plated brass of jaquar cat-no- ALD-803 AB or equivalent all as specified and directed.

S&F in repairs towel rail 600 mm long chromium plated brass of jaquar cat-no- ACN-1111NM or equivalent all as specified and directed.

S&F in repairs towel rack 600 mm long with lower hangers chromium plated brass of jaquar cat-no- ACN-1181FHN or equivalent all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe.

S&F in repairs Sink single bowl made of stainless steel 1mm thick kitchen or laboratory with plugs, washers ,waste pipes and brass waste coupling, incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall (cat no 1224SDM ) size of bowl 610mmx460mmx254mm of Prayag or equivalent as approved by GE.

S&F 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repairs.

S&F 500 ltr capacity of rotational moulded polyethyline water storage tank (Cylindrical vertical with closed tape) hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified & as directed incl. Dismantling water tanks complete all as specified and directed.

S&F in repairs PVC (SWR) pipe single socketed in any length with adhesive joints laid in trenches or in floor for 110mm dia with fittings complete .

S&Fin repairs PVC (SWR) pipe single socketed in any length with adhesive joints 110mm dia fixed to walls with 3 nos ms clamp (for each vertical pipes) with fittengs as in rain water or vent pipes all as specified and directed.

S&Fin repairs PVC bends any radius 110mm dia provided with excess door.

S&Fin repairs PVC (SWR) junction single T equal or unequal 110 mm dia provided with excess door.

S&Fin repairs PVC vent cowl 110 mm dia.

S&Fin repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement.

S&F in repairs PVC (SWR) pipes 75 mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete.

Dismantling of asbestos cement (corrugated ,semicorrugated etc) sheets including ridge in roof covering.

S&F 0.45 mm thick galvalume sheet mangalore pattern tile with guard film precoated coloured of make Durashine mfg by TATA blue scope building product or equivalent fixed with self driving screws complete all as specified.

S&F 0.45 mm thick galvalume sheet precoated coloured ridge suitable for manglore pattern sheet of make Durashine mfg by TATA blue scope building product or equivalent fixed with self driving screws complete all as specified.

S&F FI 40x6mm wind ties for roof incl securing bolts conforming to fe 410-o or Fe 310-o etc complete all as specified and directed.

S&F purposely moulded looking mirror 5 mm thick glass fixed with studs all as specified and directed by Engr-in- charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc completed all as specified and directed by engr-incharge

Providing and fixing factory made PVC kitchen & cupboard Frame of size 75 mm x 40mm with a wall thickness of 4mm made out of extruded 4 mm thick prelam PVC sheet of density 600 Kg/Cum density manufactured by an ISO 9000 certified company, reinforced with 15 mm x 15mm MS square tubes of 19 guage thickness throughout the frame and mitre cut at two corners adjointed with 2 nos of 150mm long brackets of 10mm x 10mm MS square tubes. The frame shall be fixed to the wall using 65/100 long MS screws throough the frame by using PVC fastners. A minimum of 2 nos of screw to be provided for each vertical member and minimum of 2 nos of screw to be provided horizontal member etc. complete

Providing and fixing PVC kitchen & cupboard shutter of 18 mm thick consisting of panel of hollow PVC profile of 12 mm thickness consisting of MS frame made out of MS tube of 16 guage thickness and size 10mm x10mm insrted all around the hollow profile section and lipped with 8 mm (4mm x 2) thick and 12 mm wide on stiles and rails using solvent cement. The inner panel shall consist of 4 mm prelam moulded PVC sheet of density 600 Kg/Cum density manufactured by an ISO -9000 certified company, on the front side & 2 mm prelam PVC sheet of density 700 Kg/Cum using solvent cement on noth side of the panel. the thickness of the shutter is edge lipped by 18 mm width x 1 mm thick PVC sheet using solvent cement etc. including hinges and handle etc as per manufacturer's specification and drawing, Complete

Providing and fixing factory made PVC shelf/ partition of required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/partition and shall provided 3 edges in size 18 mm width x 1 mm thick PVC sheet of density 600 Kg/Cum density manufactured by and ISO -9000 certified company, using solvent cment etc. hinges and iron mongry as per manufacturer's specification and drawings complete.

Providing kitchen cabinet in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancinglamination sheet consisting of carcass 18 mm thic PVC sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet all required brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree bent finish , including all fittings and iron mongry as per make and specification mentined as per drawing and specification approved by engineer-in-Charge.

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S & F Machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment etc over and incl 40 mm thick uniformly levelled surface of stone dust cushioning including PCC 1:2:4 type B-0 as in coping all around of size 150 x100 mm thick all as specified and directed by Engr -incharge.

Demolition of reinforced cement concrete any description and in any position n.exc 15cm thickness.

M&L for MS "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including crnaking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chips.

Ditto all as per item 126.00 above but 6 to 8 mm dia bars.

Ditto all as per item 126.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. rough finished flat surfaces of concrete.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n exc. 200m thick (Horizontal or sloping) rough finished flat surfaces of concrete.

M&L for RCC 1:1.5:3 (nominal mix) type A1 (using 20mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span.

M&L for RCC 1:1.5:3 (nominal mix) type A1 (using 20mm graded crushed stone aggregate) as in landing, cooking platforms, shelves and the like

Taking down of old roof treatment of any description including mud phushka, lime, concrete, tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc .

M&L for PCC ( 1: 2: 4) type B-0 (using 12.5mm graded crushed stone aggregate) etc on roof top as a leveling course / padding to maintain the slope,finished the surfaces even and smooth without using extra cement etc.

M&L for rendering 15 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab ,complete all as specified and directed.

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified.

The surface of roof,perapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm

Laying of water proofing treatment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc.

Taking down main switch, DB/change over/MCCB, AC box of any capacity.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge Make– Havells/Finolex/Polycab

Ditto For one light/fan point controlled by one switch

Ditto For one 3 pin, 5 Amp independent socket point controlled by one switch

Ditto For one 3 pin, 5 Amp socket point with other switch on the same board

Ditto all as per item No 139.00 here in before but for power point wiring using with 2.5 sqmm PVC-FRLS insulated, unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

S&F Modular switch, one way, 6 Amp 230, 1 module. Make- Havells Athenea / L&T/ Schneider

S&F socket Modular 6 Amp-2/3 pin combined 2 module Make- Havells Athenea / L&T/ Schneider

S&F switch Modular, single pole, one way,15 Amp 230 Volt Make- Havells Athenea / L&T/ Schneider

S&F socket modular 2 in 1, 6 pin, 5/15 Amp, flush type universal shuttered 230 Volt complete. Make- Havells Athenea / L&T/ Schneider

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal. Make- Havells Athenea / L&T/ Schneider

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting with 9 watt LED bulb. Make FOR HOLDER- Havells Athenea / L&T/ Schneider & Make FOR BULB:- Havells / CG / Philips

S&F modular fan regulator electronic double space rotary step type 5 speed 120W, 2 module. Make- Havells Athenea / L&T/ Schneider

M&L for LED TL fitting 20 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness. Make Havells Cat Part N0 LUMILINEBS20WLED830SPCWH LED 6500K 4 feet or eqvt in Phillips/CG.

M&L LED TL fitting 20 watt warm white for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness. Make Havells Cat Part N0 LUMILINEBS20WLED865SPCWH LED 6500K 4 feet or eqvt in Phillips/CG.

S&F testing and commissioning of MCB SP 6-40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. Make- Legrand/ L&T/Havells

Ditto all as per item no 150.00 above but SPN 63 Amps, 240 V. Make- Legrand/ L&T/Havells

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size. Make- Legrand/ L&T/Havells

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size. Make- Legrand/ L&T/Havells

S&F double door metallic sheet metal enclosure for DB double door(DPX-125 ) VTPN 8 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 08. Make-INDOASIAN / L&T/ Havells

S&F metal clad box enclosure with socket plug top and MCB SP 20 Amps flush mounting enclosure with 2 pin and earth plug socket complete all as directed by Engineer-in-Charge Make- Legrand/ L&T/Havells

S&F MCCB 63 Amps 4 pole, 415 V 16 KA. Make- INDOASIAN / L&T/ Havells

S&F MCCB 100 Amps 4 pole, 415 V 16 KA. Make- INDOASIAN / L&T/ Havells

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification.

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 10 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 10 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

S&F box type LED mirror optic fitting 1x9 Watt 2 feet box type complete .Make:Havellls (cat part No LIMILNEBS9WLED840SPCWH)/CG/Wipro"as approved by GE, all as specified and directed by Engr -in -Charge

S&F ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling with electronic driver Make-Havells /CG/ Wipro all as specified and directed.

S&F EDGEPRO SQUARE 15 watt natural white Slim-Fit low profile downlights are engineered to driver superior light output and uniformity utilising the latest edge-lit LED technology of size 180x180mm height 16mm Make-Havells (Cat part No EDGEPROSQDLR15W LED 8575)/CG/ Wipro as approved By GE

S&F EDGEPRO SQUARE 18 watt natural white Slim-Fit low profile downlights are engineered to driver superior light output and uniformity utilising the latest edge-lit LED technology of size 210x210mm height 16mm Make-Havells(cat part No EDGEPROSQDLR18W LED 8785) /CG/ Wipro as approved By GE

S&F LED FLEXI STRIP 24 W flexible LED strip uses high brightness SMD LED as the light source for indoor application only including LED driver, with wide viewing angle for good light distribution, easy to install Make-Havells (Cat part No FLEXISTRIPSMTRIP2024WLED 8305)/CG/ Wipro as approved by GE.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 450 mm sweep mettalic body . complete all as specified and directed. Make - Havells TURBOJET/ Bajaj SUPERME DLX/Crompton EXHD450-4-1.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 250 mm sweep PVC body with lovers complete all as specified and directed. Make - Havells/Bajaj/USHA

S&F CORAL (OPAL) IP 65 post top energy saving, environment friendly long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source all as specified and directed by Engr -in -Charge . Make- Havells Cat part No CORALPT35WLED757PSYMTOPC or equivalent in Bajaj/CG

S&F LED flood light fitting 70 Watt (JETA NEO 70) IP 65 High efficient tuffen glass including provision of weather proof PVC insulated copper conductor cable 1.5 Sqmm, 2 core as required complete all as specified and directed. Make- Havells Cat Part No JETANEOFL70WLED757LTG or equivalent in Bajaj/CG

S&F LED light fitting (ENDURA PEARL) energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP 66 protection and impact resistance of IK07 complete all as specified and directed. Make- Havells Cat Part No ENDURAPEARLSL25WLED75SASYTOPC or equivalent in Bajaj/CG

S&F SPARKLE PRO ADJUSTABLE 08 watt warm white Recess mounted adjustable LED down/lighter with made of extruded aluminium housing and high power LED as a light source with clear diffuser with electronic driver 15 Watt Make- Havells Cat Part No SPARKEPROADJDLR8W830M0 40D or eqvt in Bajaj/CG all as specified and directed by Engr -in -Charge

S&F CONE IP 65 series acts as a imposing street furniture. The elegant yet minimalsitic design acts silent observer and giving light, diffuser at the upper portion acts a beacon of path guidance in a landscape environment . Make: Havells Cat Part No CONEBL8WLED857SSYMTOPC or equivalent in Bajaj/CG all as specified and directed by Engr -in -Charge

S&F LED wall spot light/focus light 9 watt warm white suitable for ceiling /wall as per requirement. Make- Havellls/Philips/Bajaj/CG all as specified and directed by Engr -in -Charge

S&F decorative wall mounting, SS finish fixture with texture glass diffuser suitable for 40 mini GLS lamp suitable for ceiling /wall as per requirement. Make- Havellls/ Philips/ Bajaj/ CG all as specified and directed by Engr -in -Charge

M&L electric water heater (Geyser) ISI marked 50 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make -Havells cat part no GHWAMESWH050 , or eqvt / Usha/ Bajaj

Supply, laying and testing cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core. Make - Havells/Polycab/RR Kable

Supply, laying and testing cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core. Make - Havells/Polycab/RR Kable

Supply, laying and testing cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core. Make - Havells/Polycab/RR Kable

M&L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable all as directed.

M&L for local sand cushioning with dry and clean over and under the cable for protection of cable , 80 mm sand laid before laying the cable 150 mm sand after laying the cable and filling the sand in cable duct of inside the sub station building complete all as directed. Note: Punned thickness shall be measured & paid.

M&L for GI tubing of size 25 mm bore, medium grade, ISI marked complete all as specified and directed.

M&L for GI tubing of size 40 mm bore, medium grade, ISI marked complete all as specified and directed.

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

SHIV SHANKAR MISHRA

S Balwinder Singh