44/ Project cell/bhilai/2025

MUNICIPAL CORPORATION BHILAI

REDEVELOPMENT OF JAWAHAR MARKET AT - ZONE - 3 , BHILAI (C.G.)

BILL OF QUANTITY

Sno Code Particulars Qty Unit

1 3.2 Excavation in Soil (by Mechanical Means.) Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto 1000 meters as per relevant clauses of section 300. 1125.00 Cum

2 3.13 Construction of sub-grade with Material Obtained from Borrow Pits/Borrow Area Construction of sub-grade with approved material/selected soil having C.B.R. > 8 (unless specified otherwise in the contract) obtained from borrow pits/borrow area with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 1125.00 Cum

3 4.1 Construction of granular sub-base by providing graded Material, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 375.00 Cum

4 4.1 Construction of granular sub-base by providing graded Material, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 375.00 Cum

5 4.6 Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406.) 375.00 Cum

6 5.1 Prime coat (Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular Base including clearing of road surface and spraying primer using mechanical means as per clause 502. 1875.00 Sqm

7 5.2 Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503. 1875.00 Sqm

8 5.4 Dense Bituminous Macadam (Providing and laying dense bituminous macadam with minimum 40-60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.505 complete in all respects.) 131.25 Cum

9 5.2 Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503. 131.25 Sqm

10 5.7 Bituminous Concrete (Providing and laying bituminous concrete with minimum 40-60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.0 to 6.0% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects) 93.75 Cum

11 8.22 Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-1997. The finished surface to be level, uniform and free from streaks and holes.) 100.00 Sqm

12 8.34 Providing and fixing of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro-prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0oC to 700C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleep-charging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and

length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. 250.00 Each

13 8.21 Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work (Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control 80.00 Sqm

14 1.1 Transportation of metal i/c loading & unloading 1125.00 Cum

15 4.11 Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting. watering rolling and royalty charges etc. complete. 150.00 CUM

16 16.42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead . Ch - 16 , Page no. - 149 , Item no - 16.42 4.40 SQM.

17 16.3.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. Ch - 16 , Page no. - 146 , Item no - 16.3.3 198.40 SQM.

18 16.43.2 Demolishing cement concrete including disposal of material within 50 metre lead. Ch - 16 , Page no. - 149 , Item no - 16.43.2 175.379 SQM.

19 1.27.3 Extra for mechanical transport for every one km or part thereof beyond first 5 km lead. Ch - 1, page no - 13, item no. - 1.27.3 627.68 SQM.

20 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 1316.00 Sqm

21 1.4 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared 600.00 SqM

22 22.1 Trenching in ordinary soil upto a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly leveling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). 220.00 Cum

23 22.2 Supplying and stacking of good earth at site including royalty, loading, unloading and carriage upto 5 km (earth measured in stacks will be reduced by 20% for payment). 256.00 Cum

24 22.4 Supplying and stacking at site well decayed cow dung manure from approved source, including loading, unloading and carriage upto 5 km (manure measured in stacks will be reduced by 8% for payment). 55.00 Cum

25 22.6 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. 550.00 Sqm

26 22.7 Fine dressing the ground 550.00 Sqm

27 22.8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately). 275.00 Cum

28 22.9 Mixing earth and sludge or manure in proportion specified or directed. 275.00 Cum

29 22.14 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : 550.00 Each

30 22.25 Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand:

22.25.1 Hedges Like Alife, Dorenta,Tikoma Etc 550.00 Each

22.25.2 Furn like Arica, China etc (3 year old) 500.00 Each

22.25.3 Hibiscus (Flower)/ Rose 480.00 Each

22.25.4 Carpet grass (well developed) 430.00 Each

31 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) 1087.50 sqm

32 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. 864.55 CUM

33 1.6 extra foe every additional lift of 1.5 m or part there of. 29.41 CUM

34 1.7 Extra for planking, strutting and packing materials for cavities in close timbering if required to be left permanently in position (face area of the timber permanently left, to be measured). 53.935 CUM

35 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 486.04 CUM 0.00

36 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work 123.55 CUM

37 3.1/23 Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding cost of centering and shuttering (with 40mm nominal size graded stone aggregate). 4.2 cum

38 6.1/40 Random rubble masonry with hard stone in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 stone aggregate 20mm nominal size) upto plinth level. 39.60 Cum

39 6.2/40 Extra for random rubble masonry with hard stone in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 34.0 cum

40 6.10/40 Extra for coursed rubble masonry with hard stone (Second Sort) curved on plan for a mean radius not exceeding 6.0m 39.60 cum

41 11.38/106 Providing and making pointing on stone work with cement Mortar 1:3 (1 cement : 3 fine sand) 75.4 Sqm

42 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 113.71 CUM

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

43 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level 551.934 SQM

2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 77.59 sqm

2.1.13 Weather shade, chhajja, Cornices and mouldings 1.94 Sqm

2.1.8 Beams, lintels, cantilevers & walls 7.28 Sqm

2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 6.76 Sqm

44 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 41.798 CUM

45 12.65 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm 300 SQM

46 9.3 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. 7302.804 KG

47 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

48 10.9 Providing and fixing 15 cm. wide 45cm. overall semi circular plain G.I. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipe complete as per designs.

10.9.2 0.63 mm thick sheet 40 MTR

49 10.5 Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete 25 MTR

10.5.1 1.00 mm thick sheet with zinc coating not less than 275gm/sqm

50 14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: 50 SQM

51 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix 42 SQM

52 9.57 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete 560.76 KG

53 12.36 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete. 300 MTR

54 12.79 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 48 SQM

55 PWD ROAD SOR 2025 8.13 Overhead Signs as per Clause _ 8.2. Providing and erecting overhead sign including fixing of retro- reflectrorized sheeting digitally printed of Class-C Micro Prismatic Grade Sheeting of Type-XI confirming to ASTM D 4956 including covering with transparent sheeting (lamination sheeting) to protect from fading and damage due to wheather effect as per IRC:67-2022 made of retro-reflective type sheeting vide clause 801.3, fixed over Aluminum sheeting of overall thickness 2mm including application of fluorocarbon coating applied on exposed surface of aluminium to ensure corrosion resistance, with appropriately supported by a mild steel back frame of ISA 40 x 40 x 5 mm including all panels supported by diagonal members and painting all exposed components of the signs and supports with primer and 2 coats of epoxy paints or powder coating as per clause 7.2 of IRC:67-2022) and errecting the sign board mounted over back supoort frame with vertical and_ lateral clearance as per clause 802.2 and 802.3 and relevant clauses and installed over a designed support system as per clause 802.6 of aluminum alloy or galvanized steel

trestles and trusses of sections and typer as per structural design requirements and approved plans. (Note: The details of manufacturer, type of sheeting, month and year of installation, project details and other details along with QR code as detailed in clause 13.2 and Annexure-VII of IRC:67-2022 shall be printed on back side of the sign board. 84 SQM

56 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: 12384.10 kg

57 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized. 9548.00 kg

58 26.17.1 ABC Fire Extinguisher 9KG Nitrogen Store Pressure As per IS:15683:2018 Body Sheet Not Less Then 2mm Thickness, CE Mark NRV Valve With ABC Powder 90% UL 299 FIRE RATING: 6A, 144B. With all accessories. 35.00 Each

59 26.17.5 CO2 type Fire Extinguisher ISI marked confirming to IS:15683:2018 Capacity 4.5Kg. INITIAL CHARGE:- Carbon dioxide used in extinguishers shall comply with IS 15222. FIRE RATING:- 55B. Complete with Hose Assembly and horn , locking arrangement, operation manual, bracket with two screw and sleeve 35.00 Each

60 26.4 10 Loop Fire alarm Control panel ( Modular) each loop 252 points Each loop having capacity to handle 252 addressable points (detector & devices) in any flexible combination, with battery backup 24hours and 30minutes, 6", backlit LCD display, Touch screen for maintenance operations and function keys,Multi-language display,5000-event, history-logging capability with on-line and off-line reports ,Multiple levels of password protection,Time-based-controlled output functions,Holiday schedule,UL 864 9th Edition Listed & ULC Listed FM Approved. 2.00 Each

61 26.17.4 ABC Fire Extinguisher 2KG Nitrogen Store Pressure As per IS:15683:2018 Body Sheet Not Less Then 2mm Thickness, CE Mark NRV Valve With ABC Powder 90% UL 299 FIRE RATING: 1A, 34B. With all accessories. 30.00 Each

62 26.9 Intelligent Addressable Multi-sensor Smoke detector: Multi-criteria addressable fire detector that incorporates photoelectric and thermal sensors,Polarity insensitive utilizing SureWireTM technology,Tri-color detector status LED with 360° viewing,Fieldselectable application profiles,Superior EMI immunity, Remote sensitivity-measurement capability,Automatic environment compensation,UL Listed and ULC Listed; FM Approved. 30.00 Each

63 26.24 Supplying , installation , testing and commissioning of diesel Engine driven common stand by pump, horizontal centrifugal end suction backpull out type of cast iron body, bronze impeller, SS 410 shaft with mechanical seal and capable to deliver 2280 LPM at 70 MWC. The pump shall coupled to suitable 67 HP of Diesel engine radiator water cooled type with speed of 2150 RPM and complete set shall be mounted on common base frame. 12 vBatteries & battery leads with stand, Fuel tank ( for 6 Hrs. operation ) with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes radiator water cooling piping(if reqired) coupling gaurd and other stanadrd accessories,RCC foundation (as recommended by manufacturer) and foundation bolts, etc. complete. 1.00 Each

64 26.13 Conventional Type Hooter with Strobe: Hooter with Strobe. Wall Mount models feature field selectable candela settings of 15/30/75/110cd and 135/185cd. Ceiling Mount models feature field selectable candela settings of 15/30/75/95cd and 115/177cd. UL Listed, ULC, FM approved. NFPA Compliant. Red. 18.00 Each

65 26.17.2 ABC Fire Extinguisher 6KG Nitrogen Store Pressure As per IS: 15683:2018 Body Sheet Not Less Then 2mm Thickness, CE Mark NRV Valve With ABC Powder 90% UL 299 FIRE RATING: 4A, 144B. With all accessories. 28.00 Each

66 C.G pwd road 2025 sor no. - 3.12/11 Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) 390.00 cum.

67 13.6.3 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. Red, Blue, Green, Black and Grey 100.00 SQM

68 13.3 15 mm thick Marble work (machine cut, table rubbed & polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. 100.00 SQM

69 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): 55.88 sqm

70 PWD SOR,9.61 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately) 4mm thick 55.88 SQM

71 BUILDING SOR 4.19 Providing water proofing treatment against dampness & Seepage on RCC or lime concrete roof/ terrace, over head tank, sunken slab consisting of following operations: i) Removing loose material and 25 mm cement concrete/ cement plaster including gola etc. and cleaning the surface. ii) Drilling 20mm dia holes spacing not more than 300 mm center to center in cracks and joint of wall & slab. iii) Injecting polymer based high strength water proofing compound of approved brand & make, admixed with cement in the ratio as specified by manufacturer, in holes by pressure pump. iv) Leveling the surface by providing and laying 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5/6mm) mixed with polymer based high strength water proofing compound of approved brand & make in the ratio as specified by manufacturer. v) Providing and laying of bonding slurry prepared by mixing of cement with approved make and brand acrylic polymer (as per IS 13435 Part-3) in two layers (totaling up-to 3mm thick) by brush. Second layer to be laid after 4 hours of first layer. vi) Providing and laying 15mm thick cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) and finishing the surface with neat cement admixed with integral water proofing compound (IS: 2645) as per manufacturers recommendations. This operation shall be continued upto 300 height on parapet wall. vii) After a short period of above operation a string marking shall be done making squares of 300x300mm. 1000.00 sqm

72 6.58 Supplying, installation, testing and commissioning of Acrylic LED light (a) Specification of Acrylic 3 mm thick x 3 "width x 4 "depth *(imbose) (b) Specification of LED modules :- Each Moduel should have 6 Nos LED of 1 was 20.00 sqft

73 6.61 Fabrication and installation of angle iron including angle size 50 mm x 5 mm thick with labour charges including materials as per specification 100.00 kg

74 6.62 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work . 3.72 sqm

75 8.4 Retro- reflectrorized Traffic signs as per Clause 801 Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign digitally printed over reflectrorized sheeting of required grade confirming to ASTM D 4956 including covering with transparent sheeting (lamination sheeting) to protect from fading and damage due to wheather effect as perClause 6 of IRC:67- 2022 made of retro-reflective type sheeting fixed over Aluminum/ Aluminium Composite Material (ACM) sheeting including application of fluorocarbon coating applied on exposed surface of aluminium to ensure corrosion resistance, supported on a mild steel back frame of ISA 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, as per approved drawing and painting all exposed components of the signs and supports with primer and 2 coats of epoxy paints or powder coating and the part of post

below ground shall be painted with 3 coats of redoxide paint as per clause 7.2 of IRC:67-2022. (Note: The details of manufacturer, type of sheeting, month and year of installation, project details and other details along with QR code as detailed in clause 13.2 and Annexure-VII of IRC:67-2022 shall be printed on back side of the sign board.)

-1 With Aluminium Sheeting

A Made of Class-C Micro Prismatic Grade Sheeting of Type XI confirming to Table 6.9 of IRC:67-2022 (for National Highways and State Highways)

(ii) 90 mm equilateral triangle 4 Each

(iv) 800 mm x 600 mm rectangular 4 Each

(v) 1200 mm high octagon 4 Each

(viii) 900 mm circular 4 Each

(ix) 750 mm circular 4 Each

76 27.2 Supplying installation testing and commissioning of ANALOGUE TYPE DOME AHD 2MP CAMERA of 1080P real time high resolution, CMOS progressive scan, True day/night capability Minimum illumination: 0 Lux (IR ON), TDN (IR-cut), AWB, AGC, Defog, 3:6mm & 2.8-12mm lens, IR distance: upto 40 meters, Power. 12VDC, Vandal resistant, Dual output AHD & CVBS as per specifications. 4 Each

77 27.3 Supplying installation testing and commissioning of ANALOGUE TYPE BULLET AHD 2MP CAMERA VF of 1080P real time high resolution, CMOS progressive scan, True day/night capability. Minimum illumination: 0 Lux (IR ON), TDN (IR-cut), AWB, AGC, Defog, 3.6mm & 2.8-12mm lens, IR distance: upto 40 meters, Power: 12VDC, Vandal resistant, Dual output AHD & CVBS as per specifications. 4 Each

78 27.4 Supplying installation testing and commissioning of ANALOGUE TYPE DOME AHD 2MP CAMERA VF of 1080P real time high resolution, CMOS progressive scan, True day/night capability. Minimum illumination: 0 Lux (IR ON), TDN (IR-cut), AWB, AGC, Defog, 3.6mm & 2.8-12mm lens, IR distance: upto 40 meters, Power: 12VDC, Vandal resistant, Dual output AHD & CVBS as per specifications 4 Each

79 27.8 Supplying, installation testing and commissioning of 08 CHANNEL AHD 1080P DVR high resolution recording, H.264 High profile compression, Playback 4/8/16 channels simultaneously, Multiple recording options: manual, schedule, motion detection, Pentaplex operation: live view, record, play back, backup and remotely access, HDMI and VGA output simultaneously upto 1080P resolution, 1 SATA HDD, DHCP, DDNS, IE browser and CMS supported, Mobile app for Android and los, Power: DC12V as per the specifications. 4 Each

80 27.9 Supplying, installation testing and commissioning of 16 CHANNEL AHD 1080P DVR high resolution recording, H.264 High profile compression, Playback 4/8/16 channels simultaneously, Multiple recording options: manual, schedule motion detection, Pentaplex operation: live view, record, play back, backup and remotely access, HDMI and VGA output simultaneously upto 1080P resolution, 1 SATA HDD, DHCP, DDNS, IE browser and CMS supported, Mobile app for Android and los, Power: DC12V as per the specifications. 3 Each

81 27.11 Supplying, installation, testing and commissioning of 4 MP Bullet Camera weather & dust proof IP based Fixed Lens day/night Camera (IP67, IK 10), 1/3" 4MP PS CMOS Image Sensor, H.265 and H.264 triple-stream encoding, WDR(120dB). Day/Night Support, UL CE FCC Certified as per the specifications. 3 Each

82 27.22 Supplying installation, testing and commissioning of 32 Channel NVR 8 Sata Port Up to 32 channel IP camera input, Max 320Mbps incoming bandwidth, Smart H.265+/H.265/Smart H.264+/H.264/MJPEG, Up to 12MP resolution preview and playback, Support 8 SATA HDDs up to 10TB each, 1 eSata, 4 USB(2 USB3.0, 2USB2.0), 2 HDMI / 2 VGA simultaneous video output ONVIF Version 2.4 conformance, Alarm In/out 16/6, Two way talk 1 Channel Input, 2 Channel Output RCA, 1 RS485, 1 RS232 2 RJ-45 port (10/100/1000Mbps), Support ANPR Camera as per the specifications. 2 Each

83 27.16 Supplying, Installation, testing and commissioning of 2 MP PTZ Camera weather & dust proof IP based Dome PTZ (Pan Tilt & Zoom) true day & night camera, 1/2.8" 2MP PS CMOS Image sensor, Max. 50/60fps@1080P, Color: [email protected]; [email protected] (IR on), Powerful 30x (4.5~135 mm) Optical and 16x Digital zoom, WDR(120dB), 3D DNR, Day/Night(ICR), Defog, ROI, EIS, AGC, BLC, HLC, Support Starlight Function, Up to 300 presets, auto scan, 8 tour, 5 pattern, auto pan, Tripwire, Intrusion, Abandoned/Missing, Face Detection, Heat Map, IR Range of 200 Mtr., Max 300° /s pan speed, 360° endless pan rotation, Built-in 7/2 alarm in/out, Micro SD card 256GB, IP67, IK10, Support PoE+, UL, CE,FCC certified as per the specifications 3 Each

84 27.26 Supplying, Installation, testing and commissioning of 4 Port Industrial POE Switch 10/100/1000 4 Port with 2 Giga SFP Uplink, Industrial PQE Switch, Support Dual DC Power Backup as per the specifications. 2 Each

85 27.29 Supplying, installation, testing and commissioning of 8 Port Industrial POE Switch 10/100/1000 8 Port with 4 Giga SFP Uplink, Industrial POE Switch, Support Dual DC Power Backup as per the specifications. 3 Each

86 27.31 Supplying, installation, testing and commissioning of 16 Port Giga PoE switch 10/100/1000 16 Port with 2 Giga SFP uplink, PoE switch Power Budget 150 watt, Single Port Max 30W, Al Extend AI VLAN as per the specifications 2 Each

87 27.34 Supplying, installation, testing and commissioning of 24 Port Managable POE Switch 10/100/1000 24 Port Managed PoE Switch with 2 Giga RJ45 & 2 Giga SFP combo uplink, Power Budget250W as per the specificatons. 2 Each

88 27.37 Supplying, installation, testing and commissioning of 4 TB Surveillance Hard disk drive Complete as required 2 Each

89 27.41 Supplying, installation, testing and commissioning of 16 Port Non PoE Giga Byte Switch 10/100/1000 16 Port Gigabit Network Switch as per the specifications. 2 Each

90 27.39 Supplying, installation, testing and commissioning of 8 TB Surveillance Hard disk drive Complete as required 3 Each

91 27.43 Supplying, installation, testing and commissioning of 24 Port Non PoE Managable Giga Byte Switch 10/100/1000 24Port Gigabit Managed L3 Network Switch with 4 Gigabyte SFP Port 2 Each

92 27.41 Supplying, installation, testing and commissioing of following size LED Monitor, table/wall mount with inbuild speaker minimum 5Wx2,with minimum 1 No of HDMI and USB port including remote control, connecting cable, batteries, and all accessories, connection etc complete as per specification 3 Each

93 1.15 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5)

1.15.2 25 mm 280 Metre

1.15.3 32 mm 280 Metre

94 2.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in surface FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) etc as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

2.13.6 3 X 4 sq. mm in 25mm conduit 280 Metre

2.13.9 3 X 16 sq. mm in 32mm conduit 280 Metre

95 6.23 Supplying, installation, testing and commissioning of following 230/250 volts LED Post Top Lantern fitting with perplex cover/decorative diffuser, electronic ballast and all other accessories on existing gate column/ pole bracket, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9 . LED chip efficacy ratio ≥ 100 lumens /watt.

6.23.5 70 WATT 50 Each

96 6.24 Supplying, installation, testing and commissioning of following LED Spike Light fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP-65

6.24.1 9 watt 50 Each

97 6.25 Supplying, installation, testing and commissioning of following LED Strip Light fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP-65

6.25.2 15 watt per metre LED Strip 750 Metre

98 6.26 Supplying, installation, testing and commissioning of following LED Signage entry/exit, fitting complete including built in battery backup for 2 hour with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP-20

6.26.2 Double sided LED Signage 30 Nos.

99 2.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in surface FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) etc as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

2.13.2 3 X 2.5 sq. mm in 20mm conduit 350 Mtr

2.13.3 6 X 2.5 sq. mm in 25mm conduit 350 Mtr

100 19.9 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete:

19.9.1 15 mm nominal bore 550.00 Rm

19.9.3 25 mm dia. nominal bore 500.00 Rm

19.9.6 50 mm dia. nominal bore 450.00 Rm

101 19.10 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured)

19.10.3 25 mm nominal bore 35.00 Each

19.10.4 50 mm nominal bore 25.00 Each

102 19.13 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality:

19.13.2 Bib cock (350 grams) 45.00 Each

103 19.17 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

19.17.1 15 mm nominal bore 45.00 Each

104 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):

19.16.1 25 mm nominal bore 25.00 Each

19.16.4 50 mm nominal bore 20.00 Each

105 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :

(Pg-187, Code No-19.47) 25.00 Each

106 19.24 Providing and filling fine sand or coarser grade all-round the G.I. pipes in external work.

19.24.1 15 mm diameter pipe 550.00 Rm

19.24.3 25 mm diameter pipe 500.00 Rm

19.24.6 50 mm diameter pipe 400.00 Rm

107 (PWD BUILDING SOR NO. - 13.12/126) Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut DHOLPUR SAND STONE (machine cut edges) of uniform colour and size upto 1mx1m size, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with weather sealant. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.) 600.00 cum

108 ( PWD BUILDING SOR NO. 3.1/23) Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 18.29 Rm

109 ( PWD BUILDING SOR NO. 2.1.7/16) Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 24.94 sqm

110 ( PWD BUILDING SOR NO. 1.17/11) Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 20.82 cum

111 ( PWD BUILDING SOR NO. 20.15/192) Providing and fixing in position precast R.C.C. manhole cover and frame L D- 2.5 of required shape and approved quality 1.00 each

112 ( PWD BUILDING SOR NO. 20.13/192) Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) : 6.00 each

113 BUILDING SOR 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 2330.00 sqm

114 BUILDING SOR 14.11 Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade 2330.00 sqm

115 12.79 Providing and laying vitrified floor tiles with double charge/ as per site condisiton 150.00 SQM

116 14.4 Preparation of wall surface by applying a coat of putty comprising of chalk mitti, varnish and white lead in ratio 2½:1:1 (2½ kg chalk mitti : 1 litre varnish : 1 kg white lead) respectively, sand papering and making the surface smooth to proper shape and presentable conditions. 150.00 Sqm

117 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. 323.03 Sqm

118 14.9 Distempering with acrylic washable distemper to give an even shade. 202.96 Sqm

119 14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: 197.30 Sqm

14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

120 12.14 Cement art Mural work 45.00 SQM.

121 ( PWD ROAD SOR NO. 9.12/40) Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification including trimming of slopes to proper profile and preparation of bed and as per clause 2504. 87.00 CUM

122 ( PWD BUILDING SOR NO. 3.12/24) Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: 15741.86 kg 0.00

123 12.65 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm 500.00 Sqm

124 ( PWD BUILDING SOR NO. 7.6/45) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 29.72 cum

125 ( PWD BUILDING SOR NO. 11.2.2/103) (ii) Providing and making 12mm thick cement plaster of mix: 288.16 sqm.

126 ( PWD BUILDING SOR NO. 14.14/133) Finishing walls with water proofing cement paint of required shade to give an even shade.

127 ( PWD BUILDING SOR NO. 9.6/80) Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 1567.50 Kg.

128 ( PWD BUILDING SOR NO. 9.43/84) Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete. 206.25 sqm

129 ( PWD BUILDING SOR NO. 14.22/134) Painting on new work (two or more coats) to give an even shade with:

130 1.26 Carriage by mechanical transport upto 5 km lead:

1.26.1 Earth 138.25 cum

1.26.3 Dismantled Building Debris (mulba) 4.73 cum

131 9.3 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. 2055.7 kg

132 9.61 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately) 188.6 sqm

133 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size. 10.92 cum

134 2.1.2 Wall of any thickness including attached pilasters, buttresses etc. in super structure. 145.56 sqm

135 22.10 Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). 120.00 sqm

136 19.6 pwd Electrical sor 2020 Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 16mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3) 10 each

137 19.10 pwd Electrical sor 2020 Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length: 10 each

138 19.11 pwd Electrical sor 2020 Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification. 10 each

139 6.28 pwd Electrical sor 2020 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 10 each

140 6.47 pwd Electrical sor 2020 Installation, testing and commissioning of all types of street lightfittings with all accessories and lamps on street light bracket fixedon wall/ pole, including connection with PVC insulated, copperconductor, single core cable upto 2 metre length, earthing etc. as required. 10 each

141 3.11 pwd Electrical sor 2020 Supplying and drawing following sizes of FR PVC insulatedcopper conductor, single core cable in the existing surface/concealed, steel/ PVC conduit/ PVC casing caping as required. 400 mtr

142 14.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia includingaccessories, and providing masonry enclosure with cover platehaving locking arrangement and watering pipe etc. with charcoaland salt as required 10 set

143 8.13 pwd Road sor 2025 Overhead Signs as per Clause _ 8.2. Providing and erecting overhead sign including fixing of retro- reflectrorized sheeting digitally printed of Class-C Micro Prismatic Grade Sheeting of Type-XI confirming to ASTM D 4956 including covering with transparent sheeting (lamination sheeting) to protect from fading and damage due to wheather effect as per IRC:67-2022 made of retro-reflective type sheeting vide clause 801.3, fixed over Aluminum sheeting of overall thickness 2mm including application of fluorocarbon coating applied on exposed surface of aluminium to ensure corrosion resistance, with appropriately supported by a mild steel back frame of ISA 40 x 40 x 5 mm including all panels supported by diagonal members and painting all exposed components of the signs and supports with primer and 2 coats of epoxy paints or powder coating as per clause 7.2 of IRC:67-2022) and errecting the sign board mounted over back supoort frame with vertical and_ lateral clearance as per clause 802.2 and 802.3 and relevant clauses and installed over a designed support system as per clause 802.6 of aluminum alloy or galvanized steel trestles and trusses of sections and typer as per structural design requirements and approved plans. (Note: The details of manufacturer, type of sheeting, month and year of installation, project details and other details along with QR code as detailed in clause 13.2 and Annexure-VII of IRC:67-2022 shall be printed on back side of the sign board.

8.13 (C) Class-C Microprizmatic Grade sheeting of Type XI, fixed over 2mm thick Aluminium sheet as detailed above, for over head sign 1.62 sqm

144 4.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC, kitchen and the like consisting of: i) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 including rounding off junction of vertical and horizontal surface. ii) 2nd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound including rounding off junction of vertical and horizontal surface. iii) 3rd course of applying blown or residual bitumen applied hot @ 1.7 Kg. per sqm of area. iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg. per sqm of area. 65.31 Sqm

11.2 12mm thick cement plaster of mix: 48.49 Sqm

145 12.10.2 Providing and laying rectified ceramic glazed floor tiles of size 300x300mm and above conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. 78.88 sqm

146 12.45.2 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) 63.55 Rm

147 12.44 Extra for nosing in Granite stone for treads. 189.15 Rm

148 12.64.1 Providing and laying upto 10mm wide stone strips for pattern in flooring of approved colour and shade 75.36 Rm

149 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification. 2 Each

150 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. 0.10 Cum

151 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 6.39 Cum

152 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized ransparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: 45.30 Kg

153 12.4 52 mm thick cement concrete flooring with under layer of 40mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer of 12 mm thick cement metallic hardener concrete mix 1:2 (1 cement hardener mix : 2 stone aggregate of 6 mm size by volume) with metallic hardening compound of approved quality mixed with cement in ratio of 4:1 (4 cement : 1 metallic floor hardening compound by weight) including finishing etc. complete. 6.76 Sqm

154 12.50 KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.) 1.11 sqm

155 11.1 Providing and making 6mm thick cement plaster of mix: 24.06 Sqm

156 11.2 Providing and making 12mm thick cement plaster of mix: 28.90 Sqm

157 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: 47.30 Sqm

158 14.1 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 100.25 Sqm

159 8.3 Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm. 6.00 Each

160 8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 1.89 Sqm

161 8.58 Providing and fixing bright finished brass butt hinges with brass polished MS screws complete: 3.00 Each

162 8.60 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 1.00 Each

163 8.61 Providing and fixing brass door latch with brass polished MS screws complete: 2.00 Each

164 8.62 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 1.00 Each

165 8.65 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 2.00 Each

166 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 75.50 kg

167 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): 3.02 Sqm

168 14.22 Painting on new work (two or more coats) to give an even shade with: 12.28 Sqm

169 ( pwd building sor no. 21.1/198) Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level.

21.1.1.3/198 All types of soil 10.00 metre

21.1.2.3/198 Rocky strata including Boulders. 60.00 metre

170 PWD Building sor no.21.6/199 Supplying, assembling, lowering and fixing in vertical position in bore well, slotted casing pipe made from ISI marked G.I. pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part- 1&Part-2) 1992 with IVth revision (having slot of size 1.6/3.2 mm), of reputed and approved make, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-incharge. 80.00 meter

171 PWD Building sor no.21.11/200 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:

172 PWD Building sor no.21.14/201 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). 0.000

21.14.1/201 Stone boulders of size range 5 cm to 20 cm, in recharge pit 15.07 cum 0.000

21.14.2/201 Gravels of size range 5 mm to 10 mm, over the existing layer of boulders 15.07 cum 0.000

21.14.3/201 Coarse sand of size range 1.5 mm to 2 mm over existing layer of gravel 15.07 cum 0.000

173 PWD Building sor no.3.9/24 Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement. 3.12 cum

174 ( pwd building sor no. 18.76/170) Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

(18.76.3/170) 150 mm dia pipe. 20.00 metre

175 ( pwd building sor no. 18.77/170) Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

(18.77.1/170) Tee/ Tee with door/ Bend 45°/ Bend 90°

18.77.1.3/170 150 mm dia pipe. 30 EACH

176 ( pwd building sor no. 18.76/170) Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

(18.76.2/170) 110 mm dia pipe. 200 METER

(18.76.3/170) 150 mm dia pipe. 40 METER

177 ( pwd building sor no. 18.78/171) Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

178 NON SOR ITEMS Self supported Galvalum Trussless roofing, supplying & Installation of self supported Arch shaped Galvalume Roofing made up of superior Qualtiy structural grade steel having base metal Thickness 1.6MM Thickness Tolerance (+- 0.03 MM ) coil width of 912 MM(+-2MM) and, profile width of 625 MM (+-10 MM) color coated Galvalume sheets compied to ASTM A792 standerds with coating mass A7. 150 yeild strength 350 MPA minimum to be used Fabrication & Installation of self supproted Roofing to be carried out using Hydraulic Profile Machines and joined by Mechanical seamers only. 4248 sqm.

179 NON SOR ITEMS Providing and Fixing Perforated Glass Façade – Supplying and installing perforated/fritted toughened glass panels (6 mm to 12 mm thick, as specified) with ceramic printing or dot patterns for ventilation/aesthetic design, fixed on MS/aluminum framework using spider fittings, brackets, anchor fasteners, and all necessary accessories. Includes fabrication, edge polishing, installation, scaffolding, labor, and all safety measures as per site conditions and engineer’s instructions. 250.00 sqm

180 NON SOR ITEMS GRC JALI (including design,supply installation and fixing of GRC jali of size 1219× 1219 with 25 to 35 mm thickness of approved colour / pattern with required MS framing i/c two coats of red oxide and painting and support hardware complete set to the satisfaction of EIC/PMC including all taxes and duties (NON SOR ) 1317.00 sqm

181 Electrification & lighting including cabling 47597.92

182 Plumbing & sanitary work for fountain 44509.92

SUB ENGINEER ASSISTANT ENGINEER EXECUTIVE ENGINEER