GE ELECT/TOKEN-65/2026-2027

M&L for laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 185 sqmm 3.5 Core all as per IS , specified & directed by Engr-in-charge.

M&L for laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 95 sqmm 3.5 Core all as per IS , specified & directed by Engr-in-charge.

M&L for laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 35 sqmm 3.5 Core all as per IS , specified & directed by Engr-in-charge.

M&L for laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 16 sqmm 4 Core all as per IS , specified & directed by Engr-in-charge.

M & L for earthing complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 meters below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and incl galvanized iron strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or controll board GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1 40mm yhick Precast RCC -25 cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. Note : (a) The unit rates quoted against this item shall be deemed to include the cost of excavation and earth work in any type of soil, common salt & charcoal dust in alternate layers, PCC 1:3:6 as in pit, precast RCC 1:2:4 type B-1 with necessary reinforcement as in cover & frame for pit, funnel, watering pipe 20 mm bore GI pipe light grade, protection pipe 40 mm bore GI pipe medium grade etc. (b) The quoted rates shall also deemed to include the cost of earth test point and earth strip and protection pipe upto 7.5 meter beyond the earth plates electrode.

Supply, installing, testing and commissioning in replacement of factory made and tested (including CPRI type tested certified panel) LT Panel board ,cubical compartmentalized , Indoor type double door , plate form mounted, suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with insulated aluminium bus bars four pole installed on porcelain/SMC insulator. The panel shall be dust and vermin proof. IP-65 class protection and shell be made of 3.15 mm CRCA MS sheet, and 50x50x6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front and rear opening type, with apron for cable entry closing locking arrangement including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size ( but not less than 2.5 Sqmm) and comprising of the following :- (a) Incoming :- (i) MCCB 4 pole , 400 Amps,50 Hz,415 Volts, 50 KA, with microprocessor release - 01 Nos (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter digital type with 4 way rotary selector switch-01No (iv) CTs ratio 400/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three (vi) Aluminium bus bar of rating 600 Amps- set of four (b) Outgoing (i) MCCB 4 pole , 315 Amps,50 Hz,415 Volts, 35 KA Adj thermal & Adj magnetic release, Ics=100%Icu - 01 Nos. (ii) MCCB 4 pole , 125 Amps,50 Hz,415 Volts, 35 KA Adj thermal & Adj magnetic release, Ics=100%Icu - 02 Nos. (iii) MCCB 4 pole, 100 Amps, 50 Hz,415 Volts,35 KA Adj thermal & Adj magnetic release, Ics=100%Icu - 04 Nos.

(c) Platform of Panel. Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45 cm above the nearest road level. Note :- (i) All out going feeder shall be connected by cable through suitable size gland plate / glands. (ii) The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint. (iii) All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947/IS 13947/Pt.II/1993 (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer.

Supply, installation, testing and commissioning of Wall Mounted, Indoor type Bus Bar Chamber with Canopy, front opening, dust and vermin proof conforming to IP-55 (or higher) protection, fabricated from not less than 3.00 mm thick Stainless Steel (Grade 304) sheet. All welding shall be argon arc welding, and the exterior surface shall be finished with a uniform satin/hairline brush finish or powder-coated with epoxy polyester paint over an appropriate wash-primer suitable for stainless steel.The chamber shall be provided with a detachable SS gland plate/apron at the bottom/top for cable entry, sturdy neoprene/EPDM gaskets, and a robust locking arrangement with padlocking facility.The chamber shall be pre-fitted and factory-wired with:Bus Bars: 200 Amps capacity, high-conductivity Aluminium Bus Bars (4-pole: 3 Phase + Neutral), properly supported on non-hygroscopic SMC/DMC molded insulators, color-coded with PVC heat-shrinkable sleeves (Red, Yellow, Blue, and Black).Incomer/Control: 1 No. 100 Amp, 4-Pole MCCB (Molded Case Circuit Breaker), having a minimum breaking capacity of 25 kA at 415 V, 50 Hz, conforming to IS/IEC 60947-2, complete with extended rotary handle and terminal spreaders. The entire assembly shall be factory-made, type-tested, and shall include all necessary internal connections with copper/aluminium strips/flexible cables of appropriate rating, dual earthing studs (brass/SS) with earth bus, minor civil works for wall mounting using SS expansion fasteners, and making good the disturbed surfaces to match the existing work, all as specified and directed by the Engineer-in-Charge."

Supply and laying GI tubes light grade ISI marked , galvanized, 80 mm bore laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed .

Boring of hole under road/pavement/hard standing or any other situation by mannual means and suitable for passing of GI pipe 40 to 100 mm bore and making good both ends all specified and directed