Repair and Renovation of work of Assistant Commissioner (HQ) Camp Office-cum-residence, Mayabunder under NACD, APWD, Mayabunder including IEI.SW-Construction of GAZEBO at first floor and providing of Modular Kitchen

Amount

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of all colour and texture except black, Cherry/ Ruby red i) Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

G.I. pipes

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).

6 mm thick Cement fiber board as per IS: 14862

Applying priming coat:

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equalavent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping aluminium screws (Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing pre-painted galvalume (PPGL) steel profile sheets accessories 0.50 mm (+0.05 %) total coated thickness, with aluminium Zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd.

Ridges plain (500 - 600mm)

Extra for providing and fixing wind ties of 40x 6mm flat Aluminium section.

Providing and fixing eaves or facia board with 19 mm thick WPC board 30 cm wide including fixing with GI nuts and bolts etc.complete.

Providing & fixing bottom cabinets of different carcass sizes made of 18mm thick Pre-laminated HDF Boards (of Green Ply/Century or equivalent) in partitions, Front Face panels & back boards ,each cabinet units consisting of required number of SS 304 Grade modular kitchen wire baskets as required a) 1st cabinets unit comprising of Top drawer for perforated cutlery baskets (4inches ht), Middle drawer for partition baskets (4inches ht) & Bottom most drawer for Thali/Plate baskets (8inches ht). b) 2nd Cabinet Unit comprising of Top drawer for Cup & Saucer baskets (6inches ht), Middle & Bottom most drawers for plane baskets (6inches ht) respectively. Including with a set of necessary soft close SS Telescopic channels 22" (Depth), Soft close SS Quadrail Channels of 22" Depth, SS Screws of required sizes, Golden Finish -G Profile Handles of Suitable Size in each drawers of cabinet unit, Adhesives etc all complete as per enclosed drawing & the directions of EIC. Note :-(Only Front Face of cabinet unit shall be measured for payment Purpose & All hinges, channels i/c wire baskets above used shall be of Hettich brand or equivalent).

Providing & Fixing Floating Shelves of 20cm wall projection made of 18mm thick Pre-laminated HDF boards (of Green Ply/Century or equivalent) in shelves, backing i/c all fixing with necessary Stainless Steel Screws, nails, adhesives etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed.)

Providing & fixing bottom cabinets of required carcass sizes made of 18mm thick Pre-laminated HDF Boards (of Green Ply/Century or equivalent) in partitions, Table top & back boards , consisting of 03Nos of Wicker baskets as required a)Cabinet Unit Comprising of Top drawer for Plane wicker baskets of 23'' width, 20" Depth, 4" Height , Middle drawer for Plane wicker baskets of 23'' width, 20" Depth, 6" Height ,Bottom most drawer for Plane wicker baskets of 23'' width, 20" Depth, 6" Height all complete including fixing with necessary clamps, Stainless Steel Screws, Set of Side Sliding Channels 22'' Depth & other accessories etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose.) (All Sliding channels, frames i/c wicker baskets above used shall be of Hettich brand or equivalent).

Providing & Fixing bottom cabinets of required dimensions for working slab area of kitchen , all made of 18mm thick Pre-laminated HDF boards (of Green Ply/Century or equivalent) in partitions,table top,Bottom, Shelves, front face shutter panels without inner shelves i/c all fixing with necessary Stainless Steel Screws, Stainless Steel Soft Close Hinges (Size 0 degree), Golden Finish -G Profile Handles of Suitable Size, nails, adhesives etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed.)

Providing & Fixing bottom cabinets of required dimensions below the kitchen working slab , all made of 18mm thick Pre-laminated HDF boards (of Green Ply /Century or equivalent) in partitions, front face shutter panels, racks, i/c all fixing with necessary Stainless Steel Screws, Stainless Steel Soft Close Hinges (Size 0 degree), Golden Finish -G Profile Handles of Suitable Size , nails, adhesives etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed.)

Providing & Fixing bottom cabinets of required dimensions below the kitchen working slab , all made of 18mm thick Pre-laminated HDF boards (of Green Ply/Century or equivalent) in partitions, front face shutter panels but without racks, i/c all fixing with necessary Stainless Steel Screws, Stainless Steel Soft Close Hinges (Size 0 degree), Golden Finish -G Profile Handles of Suitable Size , nails, adhesives etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed.)

Providing & Fixing wall mounted top cabinet with 33cm projection & other required dimensions of width & height (as per the drawing enclosed) above the Kitchen working slab with required racks, Sides, rear side board including fixing with Top Hung Fully Glazed shutters in the cabinet , all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply/Century or equivalent) using 4mm thick glass panes in the glazed shutter, 12mm thick HDF Boards in the rear sides, i/c Stainless Steel screws,Stainless Steel Hydraulic Soccer of 12Kg Capacity,Stainless Steel Soft close Hinges (Size - 0 -Degree), Golden Finish -G Profile Handles of Suitable Size , Nails, Adhesives, etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed). (Hinges, Channels, soccers above used shall be of Hettich brand or equivalent).

Providing & Fixing wall mounted top cabinet with 33cm projection & other required dimensions of width & height (as per the drawing enclosed) above the Kitchen working slab with required racks, Sides, rear side board including fixing with openable Fully Glazed shutters in the cabinet , all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply/Century or equivalent) using 4mm thick glass panes in the glazed shutter, 12mm thick HDF Boards in the rear sides, i/c Stainless Steel screws,Stainless Steel Soft close Hinges (Size - 0 -Degree), Golden Finish -G Profile Handles of Suitable Size , Nails, Adhesives, etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed). (Hinges, Channels, G Profiles above used shall be of Hettich brand or equivalent).

Providing & fixing top cabinet for GTPT (Glass Tray Plate Tray) of required size above the kitchen working slab,with openable shutters, Sides, top, bottom of the cabinet unit all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply/Century or equivalent) , 12mm thick Pre-Laminated HDF Boards in rear sides backing, Fixing of SS 304 Grade Glass & plate with drip tray set of 03Pieces inside the cabinet unit (as per the enclosed drawing) including necessary soft close auto hinges (0 Degree), SS Cleats, Adhesives, Golden Finish -G Profile Handles of Suitable Size in the shutters of cabinet unit, etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose.) (Above used hinges, baskets shall be of Hettich brand or equivalent)

Providing & Fixing wall mounted top cabinet with 33cm projection & other required dimensions of width & height (as per the drawing enclosed) above the Kitchen working slab with required racks, Sides, rear side backing boards including fixing with openable shutters in the cabinet , all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply/Century or equivalent) , 12mm thick HDF Boards in the rear side backing, i/c Stainless Steel screws,Stainless Steel Soft close Hinges (Size - 0 -Degree), Golden Finish -G Profile Handles of Suitable Size , Nails, Adhesives, etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed). (Hinges, Channels, G profile handles above used shall be of Hettich brand or equivalent).

Providing & Fixing Tall Open Cabinet for Fridge Storage with 60-70cm wall projection, width & height dimensions as required (to suit the actual fridge size) with Sides & top covered, rear side backing boards , all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply/Century or equivalent) , 12mm thick HDF Boards in the rear side backing, i/c Stainless Steel screws, Nails, Adhesives, etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed).

Providing & Fixing Tall Pantry Unit of Size 1.20m (L) x 0.60m (W) x 1.80m (H) with double door storage features, Sides & top covered, rear side backing boards, Partitions , all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply/Century or equivalent) , 12mm thick HDF Boards in the rear side backing,i/c pantry unit consisting of 24 baskets i/c Stainless Steel screws, Golden Finish -G Profile Handles of Suitable Size, Stainless Steel Soft close Hinges (Size - 0 -Degree),Nails, Adhesives, etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed).

Providing and fixing Stainless Steel 304 Grade kitchen Sink of Satin finish & Single bowl as per IS:13983 with necessary brackets and stainless steel plug 40 mm, including cutting and making good the walls wherever required :all complete as per the direction of EIC. (Of Crocodile or Equivalent) a) Of Size - 800mm (W) x 500mm (D) x 250mm (H)

Supplying, installation, testing and commissioning of brand new wall mounted Angular Suction and Auto Clean Designer Series Electric Chimney having features suction capacity 1100 Cum/ Hour for a size of 90cm (for burner stove) including ducting kit equivalent to make FABAR HOOD ALPHA HC PB BK 90 SKU code 325.0676.564 complete or its equivalent to BOSCH, GLEN, Hindware, Kaff etc. as required complete.

M/s Sharma Trading Company