REPAIR REPLACEMENT OF JOINERY FLOORING ROOF SHEETS AND OTHER MISC BR WORKS AT DOMESTIC AND DEPOT AREA AT UNCHIBASSI UNDER GE S PATHANKOT

Amount

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified.

M&L for Brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

All as per Srl Item No. 02 above, but Except Bricks.

Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete all as specified.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 using liquid water proofing compound on brick work or concrete surfaces on wall, surfaces finished even and smooth using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately under respective item).

M&L for Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10 mm thick in cement and sand mortar 1:3 using liquid water proofing compound on brick work or concrete surfaces of wall/ floor in sunken portion, surfaces finished even and smooth using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately under respective item)

M&L for Rendering 10 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling/Top and sides of chajjas/ facia of roof projection incl necessary formwork including finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Supply only Polymer liquid water proofing compound, complete all as specified and directed.

M&L for Preparation of newly plastered/ prepared surfaces of walls and applying three coats of white wash complete all as specified and directed.

All as per Srl Item No. 11 above, but on ceiling

M&L for Preparation of newly plastered/ prepared surfaces of walls and applying 3mm thick wall care putty with two coats of Oil Bound Distemper over a coat of primer to match the shade as per existing colour scheme/pattern complete all as specified and directed.

M&L for Preparation of newly plastered/ prepared surfaces of walls and applying two coats of Oil Bound Distemper over a coat of primer to match the shade as per existing colour scheme/ pattern complete all as specified and directed.

M&L for Preparation of newly plastered/ prepared surfaces of walls and applying two coats of cement base paint over a coat of primer to match the shade as per existing colour scheme/pattern complete all as specified and directed.

M&L for Preparation of newly plastered/ prepared surfaces of walls and applying two coats of Exterior Acrylic Emulsion paint over a coat of primer to match the shade as per existing colour scheme/pattern complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F GI snap grid frame work (Grid size 60x60cm) for false ceiling with powder coated GI angle of size 25x25mm, main runner 'T' of size 25x40mm secondary runner 'T' size 25x30mm suspended with 3mm GI wire with butterfly clips for levelling complete all as specified and directed.

M&L for False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. (reinforcement cut as required to facilitate demolition)

Filling of sunken floor with PCC 1:5:10 using 40mm graded crushed stone aggregate including breaking and removal of existing filling of lime concrete/PCC/brick bats and rubbish out off the premises, etc complete all as specified and directed.

M&L for Two Coats of Hot bitumen on newly plastered surface of sunken portion complete all as specified and directed.

S&F for Steel water tubing light grade 40mm dia, galvanised, including short lengths, fixed as spout as in walls of sunken portion of toilets complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in sub base for pavement, path etc, complete all as specified and directed.

M&L for 50mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B-0, using 12.50 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified.

S&F for Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified.

S&F for Glazed coloured ceramic tile 450 x 300 x 7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified.

M&L for Non skid Ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified.

M&L for Non skid Ceramic joint free tiles 7 to 8 mm thick coloured/wooden finish (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified..

Non skid coloured Ceramic Joint free exterior grade (Endura) tile 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified.

M&L for Coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick with grey cement and pigment, set, jointed and pointed in white or coloured cement to match the shade of tiles over and including 20 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block built with grey cement and pigment of 60mm thickness, any shape and size confirming to IS incl 50mm thick sand filling under paver, properly levelled etc complete all as specified and directed.

All as per Srl item No. 35 above, but except tile/ paver block.

Refixing in Same opening of Shutter and Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each for door.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified.

M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified.

S&f Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 Complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified.

M&L of Cement concrete 1:4:8, Type-D2 (40mm graded aggregate in foundations, filling and mass concrete all as specified.

Dismantling of plain or corrugated asbestos sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J- type or cranked hook bolts etc complete all as specified.

All as per Srl Item No 45 above but except sheets.

M&L for Asbestos cement two-piece adjustable plain wing ridge 6mm thick fixed with L-type or J- type or cranked hook bolts complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and directed.

All as per Srl item No. 48 above, but area exceeding 1.5 sqm and not exceeding 4.00 sqm each, complete all as specified and directed.

Taking down shutters of any description, area exceeding 1.00 sqm each, complete all as specified and directed.

Taking down shutters of any description, area exceeding 1.00 sqm and not exceeding 2.00 sqm each, complete all as specified and directed.

S&F for Pressed steel frames of size 105 x 60 mm for doors with one or more rebates incl necessary fixing lugs,hinges, lock strike plate, incl filling of PCC 1:3:6 type C-1 using 12.5mm graded stone aggregate as in frames/hold fast blocks complete all as specified and directed.

S&F for Pressed steel frames of size 125 x 60 mm for doors with one or more rebates incl necessary fixing lugs,hinges, lock strike plate, incl filling of PCC 1:3:6 type C-1 using 12.5mm graded stone aggregate as in frames/hold fast blocks complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame Complete all as specified and directed.

S&F for Factory made 35 mm thick, 2nd Class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for Factory made 30 mm thick, 2nd Class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc, supplied and fitted to chowkats complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick both side prelaminated with wood grain/coloured paint (style) consisting of frame made out of M.S. tubes for top & bottom rails complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors, door shutters; ladders; framed balusters walk ways railings framework of water tanks and similar work, complete all as specified and directed.

S&F for Z-Section Steel windows/ ventilators with side hung shutters including projecting type hinges with 2 Nos steel handle, 2 Nos Tower Bolt and 01 No steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

All as per Srl Item No 60 above but without glazing bars.

Painting to newly surfaces of wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, with two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

Preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint complete all as specified and directed.

S&F for Butt Hinges, 100 mm long medium weight, complete all as specified.

S&F for 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixedwith hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section complete all as specified.

S&F for 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.

S&F for Aluminium handles cast type anodised of size 125mm long ISI markedcomplete all as specified & directed.

S&F for 150 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified.

S&F for Floor door stopper of aluminium alloy body, two legged not less than 50mm, complete all as specified & directed.

M&L 2nd class hard wood, plain fillets, square, rectangular or triangular in section, bullnosed, wrought, secured with nails or brads, sectional area exe 13.0 sqcm but n. exc 25 sqcm, complete all as specified & directed.

S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified.

Above item no. 72 but except plywood anythickness

S&F for continous (Piano) type hinges mild steel bright finish or electrogalvanised with wide of flaps 40mm, complete all as specified & directed.

S&F for 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified.

Hasp and staple of size 100 mm, safety type, aluminium anodised with hinge pin incl bolt to hinge plate and fixed with screw complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads or in wooden shutters complete all as specified and as directed.

S&F for 03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.

S & F for 03 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.

S&F Galvanized mild steel wire-cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

All as per the description of item No.80 above but fixed in repair.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

All as per the description of item No.74 here in before but fixed in repair.

M & L for Ball catcher with proper magnetic effect fixed with shutter complete all as specified and directed.

S&F 20 mm bore PVC Coated MS curtain rod, length of one rod not more than 1.5 Metre including a pair of brackets and knobs with each length/ piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing PVC tank of any capacity complete all as specified & directed.

All as per Item No 86 Above but 1000 Litres Capacity.

S&F 15mm dia for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F 20mm dia for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store for 15mm bore complete all as specified and directed.

All as per Item No 90 Above but 20mm bore.

S&F for Steel water tubing medium grade, galvanised, including short lengths, fixed to wall/concealed in wall/ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc, of 15mm bore complete all as specified and directed.

All as per Item No 92 Above but 20mm bore.

Refixing of old Steel water tubing and connections in new or old position medium grade, galvanised, including short lengths, fixed to wall/concealed in wall/ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc, of 15/20 mm bore, complete all as specified and directed.

S&F for Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified and directed.

Vitreous China wash down water closet pan “Pedestal pattern” size 580x440mm coloured with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified and directed.

S&F for Plastic water closet seat cover, closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device (colour of cover should match with water closet) complete all as specified.

S&F for jet spray for EWC incl required length of tube fixed with Existing water tubing/ stop cock incl necessary fittings complete all as specified and directed.

Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing of automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed in repair incl supply and fixing of CP coupling, waste pipe and all necessary fittings, complete all as specified and directed.

S&F for PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 60/90 cm long etc, supplied and fixed in repairs, complete all as specified.

S&F for Vitreous china wash hand basin (flat back or angle back type), size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand incl waste pipe fixed in repairs complete all as specified and directed.

S&F for CP Brass Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore fixed in repair complete all as specified and directed.

S&FF for Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed in repair for 20mm bore complete all as specified and directed.

S&F for PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed complete all as specified.

S&F for bath cabinet of size not less than 300mmx450mm x75mm deep with standard size of glass complete all as specified and directed.

S&F for Stainless steel towel rail 20mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed.

S&F for Soap dish, Stainless steel, approximate size 160x 160x90mm complete all as specified and directed.

S&F for Shower Rose of not less than 100mm dia, stainless steel complete all as specified and directed.

S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repair complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing with cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repair incl waste coupling and waste pipe complete all as specified and directed.

S&F for Stainless steel plate rack of size 900 x 600 mm not less than 1mm thick fixed with bracket, screw and necessary arrangements fixed in repair complete all as specified and directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches/floors/walls for 75 mm bore of pipe fixed in repair complete all as specified and directed.

All as per Srl Item No 113 Above but 110mm bore of pipe.

S&F for PVC (SWR) floor bend, plain including jointing with solvent cement 75 mm bore in repairs complete all as specified.

All as per Srl Item No 115 Above but 110mm bore of pipe.

S&F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore in repairs complete all as specified.

S&F for PVC (SWR) vent cowl including jointing with solvent cement 75 mm bore in repairs complete all as specified.

S&F for PVC (SWR) reducers including jointing with solvent cement 75 mm bore in repairs complete all as specified.

Mild steel TMT bars 10 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching, coping & hanuching etc complete all as specified and directed.

M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc complete all as specified and directed.

Providing Reinforced cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in Slabs supported on walls, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary form work etc, complete all as specified and directed.

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

S S CONSTRUCTION

M/S SHRI RAM BUILDERS