Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹37.9 L+₹72,429.25 (1.95%)Rejected-Finance 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | L2 | Rejected-Finance Being higher bidder | |
| 3 | L3₹38.2 L+₹1.0 L (2.69%)Rejected-Finance DADAWA KURIYAR KHAS BASTI BASTI UTTAR PRADESH 272178 | BASTI | UTTAR PRADESH | 272178 | L3 | Rejected-Finance Being higher bidder | |
| 4 | L4₹40.4 L+₹3.3 L (8.80%)Rejected-Finance FLAT NO 404 BLOCK II NIRMAL HEIGHT SECTOR 12A OLD MATHURA ROAD AGRA 282007 UP | AGRA | AGRA | UTTAR PRADESH | 282007 | L4 | Rejected-Finance Being higher bidder | |
| 5 | L5₹40.8 L+₹3.6 L (9.80%)Rejected-Finance VILLAGE DEVRATHA NO 1 POST SHAHGANJ DIST AGRA U P | L5 | Rejected-Finance Being higher bidder |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
19 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Tech Area Agra
GE AF Tech Area Agra
ADDN ALTN TO ADMIN BLOCK BUILDING AT AF STN AGRA
2022_MES_559609_1
8200-1415/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Tech Area Agra
As per NIT
9 documents required · 9 mandatory
₹500
GE AF Tech Area Agra
₹89,000
Yes
14 Jan 2023
22 Oct 2022
21 Nov 2022
22 Oct 2022
19 Nov 2022
5 Nov 2022
22 Oct 2022 - 29 Oct 2022
Amount
Surface excavation n exc 30 cm deep and avaraging 15 cm deep and getting out in soft and loose soil etc complete all as specified and directed
Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation n.exc. 10 sqm on plan and getting out in soft/loose soil etc complete all as specified and directed .
M&L for Cement concrete type-C2 1:3:6 (using 40mm graded stone aggregate) as in foundation,filling and mass concrete as specified and as directed.
M&L for RCC M- 25 design Mix using 20 mm graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M- 25 design Mix using 20 mm graded aggregate for columns, complete all as specified and directed.
M&L for RCC M- 25 design Mix using 20 mm graded aggregate for beams complete all as specified and directed.
M&L for RCC M- 25 design Mix using 20 mm graded aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC M- 25 design Mix using 20 mm graded aggregate for Chajjas complete all as specified and directed.
M&L for TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Mild steel TMT bars 5mm dia and over upto 10mm dia for stirrups and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete etc complete all as specified and directed .
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams for rough finish surfaces of concrete, etc.complete all as specified and directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions and similar work for rough finished surfaces of concrete complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide.for rough finished surfaces of concrete complete all as specified and directed.
Removing excavated material (soil) 250m but n exc 500m and depositing where directed
M&L for brick work in cement motar 1:4 using fly ash bricks Old size straight or curved on plan exc 6 m mean radius complete all as specified and direted
M&L for brick work in cement motar 1:4 using fly ash bricks Old size straight or curved on plan in any radius in half brick thick wall complete all as specified and direted
M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and direted
M&L for Hard core, of broken stone / builders broken to gauge exc 63 mm and n exc 100mm in sub base complete all as specified and directed.
M&L for 100 mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for Cement concrete 1:2:4 type BO 25mm thick ( using 12.5mm graded stone aggregate) complete all as specified and directed.
M&L for screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finish etc complete all as specified and direted.
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles etc complete all as specified and direted.
All as per item 24 above but on vertical surfaces/skirting and including backing coat of 10mm thick in CM (1:4) all as specified and directed..
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles etc complete all as specified and direted
M&L for Glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles complete all as specified and direted.
M&L for 15 mm thick renderirng on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with water proofing compounnd @ 3% by weight of cement or as per manufacturer instrurction finishing the surface even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid seprately.
M&L for preparation of newly plastered surfaces and applying two coat of cement base paint over a coat of alkali resistant priming paint as on wall surface complete all as specified and directed.
M&L for 15 mm thick renderirng on other than fair faces of brick work or concrete surface in cement mortar 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed
M&L for applying two coats of distemper oil emulsion on newly plastered surfaces over a coat of 3mm thick wall care putty as on wall including preparation of surfaces, complete all as spfd and directed.
M&L for preparation of newly plastered surfaces and applying three coat of white wash as on ceiling complete all as specified and directed.
S&F aluminium Powder Coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Aluminium door shutter single leaf with anodized/powder coated (minimum thickness of powder coating 50 micron) aluminium frame/chowkats of section 123.0x44.45x1.5mm thick, shutter with bottom rail of section 200.0x44.45x3.0mm thick and middle rail of section 150.0x44.45x3.0mm thick and top rail & vertical frame of section100.0x44.45x2.0 with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats,EPDM rubber beading and fixing of builders hardware fittings, with necessary numbers of stainless steel 100mm size hinges-03 Nos, 200mm stainless steel handles -02 Nos, 150mm long aluminium anodized tower bolt - 02 Nos, 140mm long floor door stopper, 01 Nos rubber bushes including 5mm thick tintead glass & 12mm thick decorative partical board etc in each shutter etc complete all as specified and ditected.
S&F Aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F 3.5mm thick sheet glass ordinary quality for Aluminium frames fixed with aluminium cleat and rubber beading in each pane exc 0.50 sqm each complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube in opening as per specification and shown in drg in SSR Part-II 2020 complete all as specified and as directed.
S&F Factory made solid panel PVC door/cupboard shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S&F 200mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section all as specified and as directed.
S&F 125mm long Aluminium anodised,handles of extruded section fabricated type all as specified and as directed.
S&F 100mm Butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-2 using (40mm graded stone aggregate) as in plinth protection 75 mm thick etc complete all as specified and directed. .
M&L for Cement concrete 1:2:4 type B-1 , using (20 mm graded stone aggregate) 50 mm thick as in levelling course /padding over roof complete all as specified and directed.
Supply only integral water proofing compound conforming to IS complete all as specified.
M&L for applying evently a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg/Sqm including cleaning surface etc complete all as specified and directed. .
M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wave fabric(wt not less than 150 gms/Sqm laid on primed surface by torch application complete all as specified and directed.
M&L Preparation of steel surface any description, over 10cm in width or girth not otherwise described applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. .
S&F for tubes, medium grade galvanized with all fittings and fixed complete to wall and ceilings or laid in floors, bore of tube 15mm complete all as specified and directed.
S&F for tubes, medium grade galvanized with all fittings and fixed complete to wall and ceilings or laid in floors, bore of tube 20mm complete all as specifed and directed.
S&F bib taps 15mm bore in repair, cast copper alloy, chromium plated with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S&F stop valve 20mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union ,all as specified and directed and fixed in.
S&F PVC connection in repair 15mm bore and 450mm length with PTMT nuts on both ends complete all as specifed and directed.
S&F pillar taps, 15 mm bore cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as specified and direrected.
S&F 15mm bore stop cock cast copper alloy, chromium plated fancy type with long shank and cup (concealed type) screwed both ends for galvanized iron pipe or unions complete all as specified & directed
S&F stop angle cock 15mm bore cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for galvanized iron pipe or for unions complete all as specified and directed
S&F Soap dish vitreous China white of size @160x 160x90 mm any type fixed to plug with chromium plated brass screws, complete all as specified and directed.
S&F Aluminium anodised Tubular towel rail 20mm dia D type, 60cm long between flanges complete all as specified and directed.
S&F vitreous china wash basin, white flat back size 550x400mm fixed in granite slab, complete with, waste, chain and plug and porcelain stopper including brackets etc complete all as specified and directed..
S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) Flat back incl necessary bracket connection to flushing pipe and out going pipes all as specified and as directed.
S&F Waste coupling 40mm bore dia of discharge pipe of PTMT (half or full threaded) . (Minimum weight 60 gms) all as specified and as directed
S&F Grating round 140 mm size of PTMT(Minimum weight 50gms) all as specified and as directed)
S&F PVC waste pipe 32mm bore 600mm long all as specified and as directed
M&L for PVC (SWR) floor trap, plain 75mm dia of outlet with grating including jointing with solvent cement etc complete all as specified and directed.
S&F 10 litres capacity PVC valveless syphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets and connection to pipes and fixing of chain and pull or lever if any etc complete all as specified and directed.
M&L vitreous china, squaiting pans in repair 'ORISSA' white size 580x440mm white with 'P' or 'S' trap front or back inlet and foot rests any pattern including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good the floor complete all as specified and directed.
S & F for Rotational moulded polythylene water storage 500 ltrs capacity tank double layered cylindrical vertical type with closed top, hoisted and fixed in position including fittings all as specified and directed.
S&F PVC float / Balll valve 20mm size high presure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) etc complete all as specified and directed.
S&F PVC SWR pipe 75mm bore in any length with rubber ring joint single socketed in any length laid in floor or fixed on wall with necessary MS clamp all as specified and directed
S&F PVC SWR bend any radius of size 75mm bore all as specified and directed.
S&F PVC (SWR) junction single (single T), equal or unequal, 75 mm bore, provided with access door complete all as specified and directed..
M&L for PCC 1:2:4 Type B1 (20mm graded aggregate) as in surface channel and drains all as specified and directed.
Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius buitt in CM 1:6 etc complete all as specified and directed.
M&L hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone etc complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate in flooring complete all as specified and as directed.
M&L for 50mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed..
M&L cement concrete Type C-1, 1:3:6 (20mm graded stone aggregate) in kerb stone ,copings,, apex stones, , anchorage blocks, , etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc complete all as specified and directed..
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises etc complete all as specified and directed..
M&L for screed bed or bedding layer of mortor 20mm thick in CM (1:6) for laying of floor finish etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces walls and applying Acrylic Smooth exterior paint of required shade : (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over plaster of paris putty of 1 mm thickness over plastered surface etc complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm etc complete all as specified and directed.
M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate as in in foundations, filling and mass concrete etc complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F Pre-painting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall of any height , fixed with self tapping screws as required comlplete all as specified and directed.
S&F Pre-painting galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall of any height , fixed with self tapping screws as required comlplete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying Two coat of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L for preparation of Surfaces of any description wood, steel, iron new or old of any description and girth not otherwise described etc.,treating ends of posts,backs of chowkats with coal tar or tar black paint etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and as directed.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
M&L for point wiring complete with multi stranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable FRLS in and including PVC conduit ISI marked not less than 20mm dia including 1.5 sqmm multi stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dully and including all sunk/terminal boxes and fitting/fixture, complete with all accessories all as specified and directed: -
One light/fan/exhaust fan point controlled by one way 5 Amp switch.
One 3 pin/5 pin socket out let 5 Amp same board with other switches
One 3 pin/5 pin socket out let 5 Amp indepedent board
All as per srl item no. 94 above but for 3/5 pin socket outlet 15 Amps on independent board with 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS, in and including PVC conduit ISI marked not less than 20mm dia including 2.50 sqmm PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor complete all as specified & directed.
S&F switch piano, flush type 5 Amp single pole one way.
S&F socket out let, 2 in 1 flush type 5 pin 5 Amp.
S&F switch piano, flush type 15 Amp .
S&F socket outlet multi purpose 3 pin 15 Amp and 3 pin 5 Amp, flush type.
S&F ceiling rose 3 phase PVC surface bakelite ISI Marked three terminal.
S&F stepped type Electronic fan regulator flush and socket type complete all as specified and directed.
Supply and fixing ceiling fans complete with three blades, down rods, 230V 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make : Orient / Havells / Crompton or equivalent.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver aluminium housing, holder including 20 watt LED tube light and connecting up with 3 core copper conductor cable of suitable size from ceiling rose to LED tube light fitting etc complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and including lamp 10 watts connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
M&L for MCB DB of sheet metal enclosure double door type IP-43 protection, single pole and neutral 8 way with 200 Amp rated bus bar 240V and grouted in walls making good disturbed surfaces to match with existing surfaces etc. complete all as directed .
S & fixing 240V, 10 KA, C curve MCB of single poles and current carrying capacity 6 to 32 Amp in the MCB DB complete with connection , testing & commissioning etc complete all as specified and directed.
S & fixing 240V, 10 KA, B curve MCB of double poles and current carrying capacity 40 to 63 Amp in the MCB DB complete with connection , testing & commissioning etc complete all as specified and directed.
S & fixing 240V, 10 KA, C curve MCB of tripple poles and neutral and current carrying capacity 63 Amp 415 Volts in the MCB DB complete with connection , testing & commissioning etc complete all as specified and directed.
Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in soil complete all as specified and directed.
Removing excavated soil n. exc 50 m and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed.
M&L for laying best locally available sub class 'B' bricks (old size) for cable protection cover, laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and directed.
M&L for sand coushioning with dry and clean river sand over and under the cable for protection of cable , 80 mm thick layer of sand laid before laying the cable 150 mm thick layer of sand after laying the cable complete all as specified and directed.
Supply, laying, testing of cable XLPE pole insulated, armoured heavy duty electric under ground LT cable 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed.
S&F MCB TPN DB,4 way Vertical type,440V,3 phase with rated busbar 250 Amps, double door type suitable for MCCB as a incomer and MCBs as out going ,IP 54-IK 09 with metal double door type grouted in walls making good disturbed surfaces etc complete all as specified and directed.
S & F MCCB 125 Amps, 16KA , 4 pole with complete accessories all as specified & directed.
Supply, laying, testing and commissioning GI tubing medium grade including required GI fitting laid in trenches complete all as specified and directed for the following bore :-
(a) 25 mm bore
(b) 20 mm bore
Supply & fixing gun metal gate valve with iron wheel head,screwed both ends for iron pipe for the following sizes as specified and directed :-
(a) 20 mm bore
(b) 25 mm bore
M & L for construction of brick masonry valve pit with sub-class 'B' brick built in cement mortar (1:6), of size (30 x 30 x 30) cm (internal dimension) with one brick thick walling and 68 cm x 68 cm x 10 cm base foundation in PCC (1:3:6), type C2 with cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 40 cm x 40 cm made out from 3 mm thick MS sheet including (40 x 40 x 5) mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of the steel surfaces with two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, including necessary earth work etc complete all as specified and as directed.
M&L for cutting of existing steel tubing size upto 50mm bore for and including. Insection of new GI T of required size & including all necessary excavation & earth work if required and making good the surfaces as per existing complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .