REPAIR TO ROAD FURNITURE, CULVERT AND RESURFACING OF ROAD AT CERTAIN UNITS IN ZONE-II AT MIL STN JAISALMER UNDER GE (A) JAISALMER

Amount

M&L for bitumenous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with5.5% binder (Paving bitumenous VG-30 Grd) content by weight of total mix including prepration of existing black top/ unsurfaced water bound macadam by brushingwith wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with with gunny bags to rmove all loose dirt etc and applying evenly a priming taaack coat of bitumen VG-10 grade @5Kg/10 Sqm by mechanical sprayer rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge (Note: Repair of road carried out in patches )

M&L for repair to pot hole of any depth exc 30mm and n.exc 1.00 sqm each including sweeping free from dust and mud water, scouring sunken surface in road etc, cutting around edges to at least 25mm in depth making good by applying tack coat at 5kg per 10sqm putting in premixed bitumen macadem, well rammed and sealed with binder 9.8 kg per sqm, blinded with 0.09cum stone chippings, 6.3mm size and again will rammed (including supply or premixed macadam, binder and chippings)

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness below or above ground level etc all as specified and as directed.

M&L for pre cast cement concrete type B1 1:2:4 using 20 mm graded aggregate for kerb blocks,brackets etc for any section and design,moulding , fair faces slightly rounded or chamfered weathering including fixing arrangement for cement concrete jalli set in cement motar 1:4 all as specified.

M&L for painting concrete surface of any description over 10cm girth or width or otherwise described including prepration for new untrated surfaces and applying one coat of priming paints plaste coat and two coat of synthetic enamel paint

M&L for marking 2.00 mm thick center lin, stop line, dashes, arrows, brackets & similar work on road surfaces as per IRC pattern with thermo plastic paint of approved make & mix with 8% mica sign applicator machine complete & traffic diversion arrangment. (Make-CMS Bombay/Shivalik Prime-Chandigarh/Ritacto-Meerut/SN Industries-Delhi)

S & F in repair delineator at the top potion high performance 100mm dia reflector and regular reflectors of 70mmX23mm are fixed on both side of guide post. The body of guide post is moulded in ABS plastic and it is fixed on power coated steel pipe of 1.00m height, fixed in ground with PCC 1:3:6 type C-2 of size 300mmX300mmX300mm including necessary excavation and earth work all as specified and directed by Engr-in-Charge

S&F in repair speed breakers (ABS) product code AP-1004, make:ACME or equivalent of size 350mm wide and 5omm height in yellow and black color (alternative) all as per manufacturer's instruction all as specified and directed by Engr-in-Charge

S&F in repair cat eye tow way reflective of size 100x100x18.5mm with aluminium body with reflective panels Amber/Red/White, Make:Seimen/Dark Eye/Solar/Road Star/Alfa Gold as approved by GE

S&F in repair solar road stud aluminium alloy body of size not exc. 125X125X20mm, (red colour) with battery Ni-MH-1200 mAh 3volt, LED -6Nos blinking type, backup exc 48hrs all as specified and directed by Engr-in-charge

M&L Premix bitumenous macadam laid/rolled and compacted to required gradient and camber (average consolidated thickness 75 mm thick including applying tack coat with paving bitumen VG-10 grade at the rate of 5 kg/10 sqm complete as per directed by Engineer-in-Cfhage.

S& F 75 mm dia Convex mirror mounted on metal sheet body and frame work suitable for road side mounted on angle iron (50 x 50 x 6 mm) for mirror bottom each 1.20 m high above GL and fixed with PCC 1:3:6 type C2 complete by Engr- in - charge.

GEMRARAMCONTRACTOR

Satya Construction

SATI MATA CONSTRUCTION COMPANY

BHARAT NIRMAN INFRASTRUCTURE COMPANY

M/s. Bhati Constructions, Jaisalmer