Comprehensive maint of seepage / leakage in INF Bde area under AGE B/R I at NAMS

Amount

M&L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, including dismantling of old bricks complete all as specified and directed.

All as per item 2 here in before but except bricks complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete incl demolition of brickwork /stone built in cement mortar etc all as directed.

All as per item 4 here in before but except brick.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and fair (without using extra cement) incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed. incl WPC @3% by weight of cement etc. Note-WPC will be measured and paid separately under appropriate items

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) complete all as specified and directed. incl WPC @3% by weight of cement etc. Note-WPC will be measured and paid separately under appropriate items

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed

M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed

Supply only water proofing compound ISI marked complete all as specified and directed.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.

M&L for two coat of weather proof exterior emulsion paint incl preparation of new plastered wall surface complete all as specified and directed. Note : Colour and make as approved by Engr-in-Charge

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 09 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for colour glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L of coloured Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick as in vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture incl taking down old frame of any type and making good to disturbed surface with cementconcrete 1:2:4/cement mortar 1:4 complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent ement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as per manufacturer's instruction including taking down of old shutter and making good to disturbed surface with cement mortar in 1:4 complete all as specified all as specified.

S&F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down shutter and cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as required and make finish good to the existing surface complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 8 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame iIncl taking down old window and making good dismantled portion with PCC 1:2:4 type B0 (using 12.5 mm graded stone agg) incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed.

S&F mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 incl 12mm square guard bar 10cm c/c and two coat of synthetic enamel paint over one coast of primer including taking down old steel ventelator and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

S&F for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads complete all as specified and directed.

S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.

S &F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 75mm long cold rolled mild steel medium weight butt hinges welded or screwed to steel, aluminium and wooden chawkhat complete all as specified and directed.

S&F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3 incl taking down old pipe complete all as specified and directed.

Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, incl taking down old pipe complete all as specified and directed

S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3incl taking down old pipe complete all as specified and directed.

Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, incl taking down old pipe complete all as specified and directed

S&F of 75mm PVC (SWR) Nahani/floor trap, plain with grating including jointing with solvent cement complete all as spd

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drains pipes, jointed in cement mortar and taking out of trenches,or from wall, if required upto 75/100 mm internal dia of drains completed all as specified and directed by Engr-in-Charge .

S&F, 100 mm sand cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed ro wall or trenches, floor etc complete all as specified and directed.

Taking down & refixing of CI pipe 100 mm after necessary cleaning.

S&F, 75 mm sand cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed ro wall or trenches, floor etc complete all as specified and directed.

Taking down & refixing of CI pipe 75 mm after necessary cleaning.

S&F CI 75 mm bends (Any radius) , disminishing pieces or tapers fitted with oval access door completed all as specified and directed by Engr-in-Charge

S&F CI 100 mm bends (Any radius) , disminishing pieces or tapers fitted with oval access door completed all as specified and directed by Engr-in-Charge

S&F 75 mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

S&F 100 mm CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

M&L Cast iron floors traps 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) complete and fixed all as specified and directed by Engineer-in-charge.

PVC waste pipe for WHB including all fittings fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

S& F, in repair vitreous china urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl flush pipe, grating, waste coupling and union for discharge pipe complete all as spd and directed by Engr-in-charge.

S&F in repair vitreous china ware ovel counter ovel wash hand basin, any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling all as specified and approved by Enger-in-Charge.

S&F in repair for viterous china wash hand basin white flat back size 550 x 400 mm incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.

S&F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.

S&F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including 32mm dia flush pipe of polyethylene of high density for low level cistern complete all as spd and directed by Engr-in-charge.

S&F 450mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed.

S&F in repair 15mm bore pillar cock chromium plated scrwed down high pressure complete all as spd and directed CAT FLR 5011N of Jaquar or equivalent of make as per list of make complete all as specified and directed.

S&F in repair 15mm bore bib tap chromium plated scrwed down high pressure complete all as spd and directed CAT SH FLR 5047N of Jaquar or equivalent of make as per list of make complete all as specified and directed.

S&F in repair anlge cock chromium plated scrwed down high pressure with capstan head screwed for iron pipe 15mmbore complete all as spd and directed CAT FLR 5053N of Jaquar or equivalent of make as per list of make complete all as specified and directed.

S&F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or buttewrfly handle screwed down to iron pipe with all fittings complete all as specified and directed.

S&F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed.

S&F in repairs 15 mm bore dia fancy type chromium plated long shank and cup stop valves (Concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S& F for in repair swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed.

S&F in repairs chromium plated Urinal spreader for fixing with 15 mm dia bore pipe complete all as spd and directed by Engr-in-charge.

S&F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

M&L for 40 mm thick Plain cement concrete 1:2:4 type B-1(20mm graded stone aggregate) as flooring finished even & smooth using extra cement , incl demolition of old concrete in any description concrete complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass incl demolition of old concrete in any description concrete complete all as specified and directed.

M&L of 25mm plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course incl finishing even and smooth using extra cement complete all as spd

M&L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed

Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for 50mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding ,hunching, sub base floor complete all as specified and directed.

M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L, 40 mm thick brick tiles laid and joints in cement mortar (1:3) over 25 mm thick screed bed in cement morter 1:4 and flush pointing as work proceed complete all as specified and directed.

All as per item 77 here in before but except bricks tiles complete all as specified and directed.

M&L, cement concrete 1:7:12 (40 mm graded aggregate) in lean concrete including demolition complete all as specified and directed.

M&L, for rendering 10mm thick in CM 1:3 with WPC in sunken slab incl one coat of bitumen @ 1.20 kg/sqm incl cleaning of surfaces complete all as specified and directed.

M&L for 18-20 mm thick machine cut kota stone slab laid over 15 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishing incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

S&F Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm fixed as in repair and making good to disturbed surfaces, complete all as specified and directed by Engineer-in-Charge.

S&F 500 ltr capacity triple layer rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) hoisted and fixed in position all as per SSR part-I incl 20mm bore ball valve PVC high pressure with palythene float and flynut incl taking down/dismantling of old pvc tank complete all as specified and directed.

S&F 1000 ltr capacity triple layer rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) hoisted and fixed in position all as per SSR part-I incl 20mm bore ball valve PVC high pressure with palythene float and flynut incl taking down/dismantling of old pvc tank complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. using jute brush from inside & outside of 250 litre to 500 litre capacity PVC water tanks and from mouths of connected pipes, removing the scale and dirt etc. to a distance of not exceeding 500 metre, washing the tanks with water, cleaning the connecting pipes with bleaching powder solution and finally applying 2% potassium permanganate solution for disinfection, marking with white paint on tank ‘Date of cleaning the tank ’, complete all as specified and directed by the Engineer in Charge.

Cleaning and removing all scale and dirt, etc. using jute brush from inside & outside of 1000 litre capacity PVC water tanks and from mouths of connected pipes, removing the scale and dirt etc. to a distance of not exceeding 500 metre, washing the tanks with water, cleaning the connecting pipes with bleaching powder solution and finally applying 2% potassium permanganate solution for disinfection, marking with white paint on tank ‘Date of cleaning the tank ’, complete all as specified and directed by the Engineer in Charge.

S&F PVC tank lid (cover) suitable for 500/1000 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings, fixed in repair, complete all as directed by Engineer in Charge

tarlok singh contractor

BISHAN DASS

Jaspal Construction Co.

Santokh Singh and Associates

M/s MAHAJAN CONSTRUCTION CO.