Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical All Document are correct |
| 2 | Accepted-Technical | Accepted-Technical All Document are Correct |
Tender Value
₹10.1 L
EMD Value
₹20,192
Closing Date
27 Apr 2026, 5:00 pmClosed
EE JSD Pooh
Executive Engineer Jal Shakti Division Pooh
SH Drilling of 2 Nos of borwells
2026_HPIPH_134343_1
KNR-EE-JSDP-2026-27-221-320
Open Tender
Civil Works
Item Rate
EE JSD Pooh
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
Yes
₹20,192
Yes
JSD Pooh
2 Jun 2026
16 Apr 2026
28 Apr 2026
16 Apr 2026
27 Apr 2026
16 Apr 2026
20 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Transportation of suitable truck mounted DTH and ODEX/Percussion Calyx/RC drilling rigs alongwith necessary accessories etc to the site of work and errection of rig including levelling etc. complete in all respects as per the directions of the Engineer-in-Charge. | - | Each | - | - |
| 2 | Drilling bores of 200 mm dia as per IS 2800-1979 from ground level in the overburden as per direction of the Engineer-in-Charge/hydrogeologist with suitable rigs for drilling through rocky formation consisting of sand stone, limestone, dolomites, congiomerate, boulder pebble, gravats, silt, clay or any other type of sedimentary, metamorphic and igneous rocks including cost of attachements consumables stores bils, water, POL etc complete in all respect. | - | Per Rmt. | - | - |
| 3 | Supplying and lowering IS marked 175 mm 5.40 mm thick ERW plain casing pipe as per IS 4270-2001 with upto date amendments in a length of 3 metres including cost of cutting welding, transportation charges complete in all respect. The pipe shall be at suitable intervals as per direction of Engineer-in-Charge. | - | Per Rmt. | - | - |
| 4 | Providing slotting arrangements as per IS 8110/1994-997slot size 1.57x75mm & Lowering of 175 mm dia MS sloted pipe as per IS 4270-2001 with upto date amendments, welded and joints in to bore hole in vertical position including cost of all cutting ,threding & welding of pipe etc. with in all leads & lifts, complete in all respects as per direction of Engineer-in-Charge. | - | Per Rmt. | - | - |
| 5 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-Charge. | - | Each | - | - |
| 6 | Collection and preservation of soil samples in polythene bags complete in all respects as per the directions of the Engineer-in-Charge. | - | Job | - | - |
| 7 | Development of bore well and yield testing with air compressor through V notch and disinfection etc. complete in all respects as per IS-2800-1979 and as per directions of the E-in-Charge. | - | Per Hour | - | - |
| 8 | Development / establishment of discharge of bore well and yeild testing with submersible pump Set through V-Notch as per IS 2800-1979 ncluding transporation of equipment etc. to the site of work complete in all respect bore hole drilled by RC rig.as per direction of Engineer-in Charge | - | Per Hour | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
cancelled_1.pdf
pdf • 0.39 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.97 MB
Tendernotice_2.pdf
PDF • 0.79 MB
Tendernotice_3.pdf
PDF • 2.29 MB
Tendernotice_4.pdf
PDF • 0.19 MB
BOQ_198719.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .