Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.9 LAccepted-AOC BHAVANI KRUPA GANDHI CHOWK NAGPUR | NAGPUR | NAGPUR | MAHARASHTRA | 442302 | L1 | Accepted-AOC Being Lowest and Quoted rates are reasonable | |
| 2 | L2₹46.3 L+₹86,729 (1.91%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹46.5 L+₹99,557.40 (2.19%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹47.6 L+₹2.1 L (4.59%)Rejected-Finance PULGAON | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹48.3 L+₹2.8 L (6.13%)Rejected-Finance | L5 | Rejected-Finance Other than Lowest |
Tender Value
Refer Docs
EMD Value
₹94,000
Closing Date
22 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PULGAON
GE PULGAON CAD CAMP PULGAON PIN 442303
PROVN OF OVERHEAD SHELTER AT MAIN FIRE STATION IN CAD PULGAON
2024_MES_647963_1
8083/PUL/E8
Open Tender
Civil Works
Item Rate
335 days
GE PULGAON
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE PULGAON
₹94,000
Yes
15 May 2024
27 Mar 2024
29 Apr 2024
27 Mar 2024
22 Apr 2024
17 Apr 2024
27 Mar 2024 - 12 Apr 2024
Amount
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out in hard/dense soil
Excavation over areas & depth not exceeding 1.5 M deep and getting out in hard / dense soil.
Excavation over areas & depth exceeding 1.5 M and not exceeding 3 M deep and getting out inhard / dense soil.
M & L for PCC type D2 1:4:8 (40mm graded Aggr) in foundations, filling and mass Concrete.
Returnng, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point
Removing excavated material exc 250m and n exc 500m depositing where directed at a level n exc 1.5m above the starting point
M&L for use & waste of rough finished flat Form work to sides of concrete foundations rafts, footing, base of columns, raft and raft beams, sides & soffits of foundation (if any) of foundation and plinth beams and similar work.
M & L for reinforced Cement Concrete Type 1:1.5:3 using 20 mm graded granite stone aggregate) in foundations including rafts, footings, raft beam, plinth beams and mass concrete.
Use & waste of rough finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions.
M & L for reinforced Cement Concrete type 1:1.5:3 using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts.
M&L for Rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of walls finished even and smooth w/o using extra cement.
M&L brick work with fly ash modular bricks built in CM 1:4 straight or curved on plan exc 6 mtr mean radius all as specified.
M & L for 150mm thick cement concrete 1:2:4 type B2 using 40mm graded stone aggregate complete all as specified and directed. complete all as specified and directed.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L hardcore of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface in broken stone or boulders.
M & L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor.
M & L, providing pre cast cement concrete 1:2:4 type B1 as in landings, cover slabs (for man holes etc.) using 20mm aggregate set in jointed in cement mortar 1:6 and struck flush complete all as specified and directed
M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips
-Ditto- but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders
S & F Rolled sections as in framingfor cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Grade Fe 410 -W (Gde- E- 250) quality- A etc.
S & F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and as directed.
M& L for MS Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections complete all as specified and as directed
M& L for MS Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks andthe like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.
M&L self supported roofing fix mechnically seamed roofing system such as Proflex or equivalent,made of high strength quality steel having 350 MPA yield strength, Pre coated galvalume sheet as per ASTM A792 M of Base metal Thickness of 0.8 mm.High grade steel sheet should have aluminium 55%,Zinc43.5%,coating by hot dip process of min 25 microne on top and and 12 micron on back side with epoxy primer and polyster wase-coat as per AZM 150.Including necessary anchor bolt as per manufacturer instruction. complete all as specified and directed
M & L for Two coats of synthetic enamel paint to new steel surfaces over 10cm width or girth including preparation of new surfaces and one coat of red oxide primer.
M&L for preparation of new plastered surfaces and applying two coats of cement based paint over a Coat alkaliresistant priming paint on walls .
S&F Pre-painted galvalume aluminum zinc coating Eaves gutter half round 300 mm dia with union sockets & joints set in approved jointing compound GI based Plain steel sheet 0.70mm thick of any colour having tensile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws as specified as in eaves gutter
S & F for Galvanised mild steel screw bolts of 11 to 15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 10 cm. but not exc 15cm complete
S & F for Galvanised mild steel screw bolts of 16-20 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 22.5 cm. but not exc 70 cm complete
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
S&F PVC SWR bends 110mm bore any radius all as specified and directed
M&L Pre- painted galvalume aluminum zinc coating corrugated steel sheet 0.50mm thick of (TATA Blue Scope- Colourbond / JSW Steel -radiance ,XRW with class 3 SDP paint system) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L Pre-painted galvalume aluminum zinc coating Plain steel sheet 0.50mm thick of (TATA Blue Scope- Colourbond / JSW Steel -radiance ,XRW with class 3 SDP paint system) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Forming contraction(dummy) joints 65 mm deep x 10 mm wide filled with sealing compound garde 'A' for 200mm thick concrete complete all as specified & directed.
Chhabra Enterprises
SHUBHAM SALES
M/S Maa Durga Constructions,Pulgaon
M/s Prakash Agencies
SHRI RANI SATI TRADERS
Attar Singh and Sons
RAJ ENTERPRISES
M/S JAI BHAWANI CONSTRUCTIONS
Bidder Name
Attar Singh and Sons
RAJ ENTERPRISES
SHRI RANI SATI TRADERS
M/s Dara Constructions, Pulgaon
M/S Maa Durga Constructions,Pulgaon
M/s Prakash Agencies
M/S JAI BHAWANI CONSTRUCTIONS
SHUBHAM SALES
Chhabra Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .