Construction of an approach road in Gorakhpur district Bhopa Bazar ROB via the Shaheed Smarak Sthal and Ashok Iron and Steel Rolling Mill to the Chauri Chaura-Gaunar Road Other District Road At District- Gorakhpur With 5 Year Maintenance

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per MORT&H Spe. 201 ii (A) Sr. no 2.03 (Including Labour Cess but GST will paid extra as applicable)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m As per MoRT&H Specification 301, Sr. No. 3.06 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.As per MoRT&H Specification No.305, Sr No. 3.17 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2. As per MoRT&H Specification 305, Sr No. 3.16 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable) (cartage Earth)

GSB- Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.as per MORT&H Specification 401 B, Sr No. 4.01 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Cement Treated Crushed Stone Sub base (Plant Mix Method)- Construction of granular sub-base by providing graded Material, mixing with cement (OPC) in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with Mechanical Paver on prepared surface and compacting with vibratory power roller to achieve the desired density Laying Using Mechanical Paver complete as per clause 401 as per MORT&H Specification 403 A, Sr No. 4.08 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Cement Treated Crushed Stone Base (Plant Mix Method)- Providing, laying, spreading and compacting graded stone aggregate mixed with cement (OPC) to crushed stone treated base specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density Laying Using Mechanical Paver. as per MORT&H Specification 406, Sr No. 4.15 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (Plant Mix Method) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with Mechanical paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.as per MORT&H Specification 406 A, Sr. No. 4.14 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. As per MORTH Specification 502 A(i), Sr No. 5.01 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.As per MORTH Specification 503 (i) , Sr No. 5.02 complete in all respect as per direction of Engineer in Charge (Including Labour Cess but GST will paid extra as applicable)