REPAIR/REPLACEMENT OF EXISTING OH LINE TO UG CABLE, EARTHING AND LIGHTING CONDUCTOR AT MIL STN SGNR

Amount

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 3.5 core, 240 sq mm complete all as specified and directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 3.5 core, 185 sq mm complete all as specified and directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 3.5 core, 150 sq mm complete all as specified and directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 120 sq mm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 70 sq mm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 35 sq mm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 25 sq mm, 4core complete all as specified and directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 16 sq mm, 4core complete all as specified and directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 10 sq mm, 4core complete all as specified and directed by Engineer-in-Charge..

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 10 sqmm, 2core complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge.

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

M & L for sand cushioning with dry coarse sand to under ground cable around the cable after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.

Supply and fix steel tubular swaged poles type 410SP-31(9.0 meter long) Swan Neck Type complete with CI base plate and finial and single swan neck, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement new generation energy saving and environmental friendly long life versatile pressure die-cast aluminum IP-66 roadway luminair 72 watt with heat resistant clear toughened glass, better optics for uniform distribution street/Roadway luminaire, with driver complete fitting with all accessoreis and followig specifications complete all as specified and directed by Engineer-in-Charge. (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) TDH : Max 10% (f) IP rating : Minimum IP 66 (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 KV (inbuilt + extended) (I) CCT : 5700K. (m) CRI : Morethan 70 (n) Lens - High efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @ L70 (Average 10 to 12 hrs daily) Note : Bracket for fixing and cable for connection shall be measured and paid separately.

Supply, install, test and commisioning of LT panel duly powder coated of suitable size outdoor cubical type factory made, weather & vermin proof made out of CRCA sheet 3.15mm (outdoor type) thick machine pressed with bottom frame made out of angle iron 50mm x 50mm x 6mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over 100mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete and suitable for 415 Volt AC 3 phase, 4 strip having insulated Copper bus bar 315 Amps from pole with openable double shutter on both sides (rear and front side) with locking arrangment duly pre-wired with suitable size of copper conductor cable fitted with Incomingproper size copper lugs/thimbless and connecting the incoming and outgoing MCCBs with suitable size strip duly bended and drilled and fixed with nuts, bolts & washers from bus bar to MCCBs etc duly fitted with and including the following accesories & all connected items & including taking down complete all as specified and directed by Engineer-in-Charge. FP No1 Incoming (i) MCCB 200 Amps, four pole with fixed thermal magnetic release, 415 V AC supply, having rupturing capacity 36 KA - 01 No Outgoing (ii) MCCB 63 Amps, Four pole with fixed thermal magnetic release, 415 volts having rupturing capacity 25 KA - 5Nos (iii) 32 Amp TPN - 01 No (iv) 25 Amp SPN - 01 No (v) Indicating lamps set RYB - 01 Set (VI) Digital Amp Meter 0- 250 A with CT , Digital Voltmeter 0- 500 V (Note : The LT Panel shall be approved by CPRI)

Supply, install, test and commisioning of LT panel duly powder coated of suitable size outdoor cubical type factory made, weather & vermin proof made out of CRCA sheet 3.15mm (outdoor type) thick machine pressed with bottom frame made out of angle iron 50mm x 50mm x 6mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over 100mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete and suitable for 415 Volt AC 3 phase, 4 strip having insulated Copper bus bar 600 Amps from pole with openable double shutter on both sides (rear and front side) with locking arrangment duly pre-wired with suitable size of copper conductor cable fitted with Incomingproper size copper lugs/thimbless and connecting the incoming and outgoing MCCBs with suitable size strip duly bended and drilled and fixed with nuts, bolts & washers from bus bar to MCCBs etc duly fitted with and including the following accesories & all connected items & including taking down complete all as specified and directed by Engineer-in-Charge. Incomming (i) MCCB 400 Amps, four pole with fixed thermal magnetic release, 415 V AC supply, having rupturing capacity 36 KA -01 No Out going (ii) MCCB ,4 pole 200 Amp, 25 KA -03 No (ii) TPN 32 Amp -01 No (iii) Indicating lamps set RYB - 01 Set (iv) Digital Amp Meter 0- 500 A with CT , Digital Voltmeter 0- 500 V (Note : The LT Panel shall be approved by CPRI)

Supply and fix in replacement Hot moulded (FRP) junction box of size 155 mm x 210 mm x 92 mm for street light pole with locking arrangement with 32 Amps, 4 way heavy duty terminal block suitable connection for three phase incoming cable three phase outgoing cable and single phase connection for light fittings with control MCB SP 2.5 Amps 01 Nos enclosed in thermoplastic box in closed shock proof safe IP 65, weather, vermin proof, dust and water proof complete with two number cable entry gland of standard size with suitable size mild steel clamps of size 25x3mm with nut and bolt to fix on pole complete all as specified and directed by Engineer-in-Charge.

S&F on pole/wal/in panel, Sheet metal enclosure Bus bar chamber consisting 04 pole 100 Amp 415 volts copper bus bar each Set suitable for connecting cable as a (junction incoming & outgoing total No 4 ways) including MCCB 100 Amp 4 pole 25 KA connecting of existing cables with suitable sizes aluminum thimbles complete all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level, connecting to the Galvanised iron earth lead 32 x 6 mm size by means of bolts, nuts check nuts and washers of galvanised iron and 32 x 6 mm GI earth lead protection by provision of GI medium grade pipe 40 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (wieght not less than 4gs/Sqm) and frame of angle iron 25mm x 25mm x 6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm x 8 mm FI with fixing arrangements, funnel, wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Mtrs all as per electrical Plate No.3 of SSR Part I and connecting to earth test point all as specified or indicated including testing on completion & including taking down complete all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level, connecting to the Galvanised iron earth lead 4.0 mm size by means of bolts, nuts check nuts and washers earth lead protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (wieght not less than 4gs/Sqm) , GI light grade 20mm bore pipe for watering perforated at the bottom 7.5 meter long placed on top edge of earth plate common salt and charcoal filling test point , funnel, wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Mtrs all as per electrical Plate No.3 of SSR Part I and connecting to earth test point all as specified or indicated including testing on completion & including taking down complete all as specified and directed by Engineer-in-Charge.

Boring of holes under road/pavement/hard standing or any other situation by manual mean and including passing GI pipe 80 mm bore and making good both the ends complete all as specified and directed by Engineer-in-Charge. . Note : Pipe and cable will be measured and paid separately

Supply and fix in replacement of GI pipe 80 mm bore light grade for protection of cable including provision of clamps, nut, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of GI pipe 50 mm bore light grade for protection of cable including provision of clamps, nut, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, PVC sheathed Copper conductor electric cable 1.5 Sq mm 3 Core 1100 volts grade for pole box to street light fitting complete all as specified and directed by Engineer-in-Charge.

Dismanting of unserviceable ACSR conductor/AAC conductor of any size and any type complete all as specified and directed by Engineer-in-Charge.

Dismanting of cross arm, clamps , bracing etc of MS section complete all as specified and directed by Engineer-in-Charge.

Dismanting of insulator any type and size complete all as specified and directed by Engineer-in-Charge.

Dismanting of old PCC Pole any type and size complete all as specified and directed by Engineer-in-Charge.

S & F in replacement of Automatic Street Light Control Switch using Infrared Sensor based Nature Switch for automatic switching of street lights. Nature Switch operation should be based on Natural Lux Level. Required Illuminance level for switching On is <= 30 Lux and for switching OFF >=10 Lux. The Circuit should be suitable enough to take Thre phase load of 12 KW with 3 nos Contactors, 3 nos incoming MCBs& 3 nos Outgoing MCBs of 40-63 Amps each & circuit wiring (Copper) of min 10 sqmm. complete all as specified and directed by Engineer-in-Charge.

Dismanting of Existing 1.2 Mtr GI Pipe with S/L complete all as specified and directed by Engineer-in-Charge.

All as per above item No. 10 here in before but for each additional 1.5 mtr or part there of in depth beyond the first 1.50 mtr complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 (40 mm graded stone aggregate) Type C2 for foundation of pole, stay incl frame work where reqd complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B-I coping with 20 mm graded stone aggregate for grouting, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

Singla Electricals (BID ID -3059174)

AGGARSAIN BUILDERS (BID ID -3058303)

THAKURJI ENTERPRISES (BID ID -3067742)

AYUSH BUILDERS (BID ID -3067341)