Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC BLDG 9 FLAT 130 MIRA CO OP HOUSING SOCIETY LTD SALISBURY PARK GULTEKDI PUNE 411037 | PUNE | PUNE | MAHARASHTRA | 411037 | L1 | Accepted-AOC Bidder quoted L1 rates | |
| 2 | L2₹32.0 L+₹54,370 (1.73%)Rejected-AOC 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L2 | Rejected-AOC Bidder not quoted L1 rates | |
| 3 | L3₹32.2 L+₹75,156.50 (2.39%)Rejected-AOC | L3 | Rejected-AOC Bidder not quoted L1 rates | |
| 4 | L4₹32.2 L+₹83,498.50 (2.66%)Rejected-AOC | L4 | Rejected-AOC Bidder not quoted L1 rates | |
| 5 | L5₹33.0 L+₹1.6 L (4.94%)Rejected-AOC | L5 | Rejected-AOC Bidder not quoted L1 rates |
Tender Value
₹36.2 L
EMD Value
₹72,400
Closing Date
7 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH PUNE
No. 1 General Bhagat Marg Pune 411040
8399 ADDN / ALTN OF DINING HALL FACILITY AT OFFICERS DIL / SIL PATIENTS GUEST HOUSE AT AICTS AND PROVN OF RCC RETAINING WALL NEAR PCDA(O) PUNE AND CERTAIN MINOR WORK NEAR BLDG No. P-46 UNIT LOC UNDER GE SOUTH PUNE
2023_MES_581167_1
8399 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
183 days
GE SOUTH PUNE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹72,400
2 May 2023
15 Feb 2023
9 Mar 2023
15 Feb 2023
7 Mar 2023
2 Mar 2023
Amount
Surface excavation not exc 30 cm deep and averaging 15 cm and getting out hard /dense soil complete all as specified and as directed.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation in hard /dense soil complete all as specified and as directed.
Excavation in trenches not exc 1.5mtr wide and not exc. 1.5m in depth for foundation and getting out in hard rock by chiselling complete all as specified and as directed
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed
M & L for solid block masonary exc. 10 cm width blocks of PCC design mix Gde C-5 set in CM (1:6) complete all as specified & directed by Engr-in-Charge.
Returning filling in soil including spreading, levelling, watering and well ramming in layers not exc. 25cm complete all as specified and as directed
Removing excavated material not exceeding 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed by Engr-in-Charge.
Filling under floor with moorum laid in layers not exc 15 cm thick spread, levelled and rammed, watering and compacted complete all as specified and as directed.
M&L for Nominal mix RCC using 1:1½ :3 type A-1 using 20mm graded stone aggregate, in foundation, incl rafts, footings, foundation beams, bases of columns, basement slab etc. complete all as specified and as directed.
M&L for Nominal mix RCC using 1 : 1½ : 3 type A-1 using 20mm graded stone aggregate, in Columns, Pillars, Piers, Posts and struts complete all as specified and as directed.
M&L for Nominal mix RCC using 1 : 1½ : 3 type A-1 using 20mm graded stone aggregate, in Beams, Cantilevers, Bressummers, Lintels over 1.5 m span complete all as specified and as directed.
M&L for Nominal mix RCC using 1 : 1½ : 3 type A-1 using 20mm graded stone aggregate, in slab supported on walls complete all as specified and as directed.
M&L for Nominal mix RCC using 1 : 1½ : 3 type A-1 using 20mm graded stone aggregate, as in fins, facias complete all as specified and as directed
Use and waste of formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beams, sides and soffit of foundation and plinth beams and similar work etc. for flat rough finished surface of concrete complete all as specified and as directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, coloumns and stanchions, for rough finished surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to soffits of the suspended slab such as roof slabs, floor slabs, landing and similar work etc, for flat rough finished surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to fins, facias for rough finished surfaces complete all as specified and as directed.
Use and waste of formwork for edges of concrete flats, treads in floors, window cills, concrete railing, opening in concrete walls , floors and roofs n.exc. 20cm wide and sides of PCC/RCC band in wall etc. horizontal or slopping and similar work exc. 10cm but n.exc. 20cm wide for rough finished surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beam, lintels, cantilevers, shelves including supports etc for rough finished surfaces of concrete.
S & F MS TMT bars 10mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns and binding with mild steel annealed wire of dia not less than 0.9 mm or securing with clips complete all as specified and directed .
S&F MS TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
S&F MS TMT bars 5mm dia and over upto & including 10mm dia, cut to length, bend to shape as required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers, binders complete all as specified and as directed.
M&L for rendering in CM 1:3, 5mm thick in soffits of roof slab,chajjas and like finished smooth and even with a setting coat complete all as specified and as directed.
M&L for rendering 5mm thick in CM 1:4, with WPC over and including 10mm thick on fair faces of brick work / PCC block walling in cement plaster of 1:4 (external wall) complete all as specified and as directed.
M&L for Rendering 10mm thick in CM 1:6 on brick/concrete surfaces finished even & smooth with a thin layer of sagol complete all as specified and as directed
All as per Ser. Item No. 26.00 above but in CM 1:4, 10 mm thick on concrete surfaces with WPC over roof slab & chajja top complete all as specified and as directed.
M&L for rendering 15mm thick on brick surfaces in CM 1:4 duly finished even & smooth without using extra cement complete all as specified and as directed.
M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.
M & L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course complete all as specified and as directed.
M&L for Vitrified ceramic tiles 10mm thick light sheed exc 0.42 but not exc 1.00 sqm in floor set an jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20 mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for coloured joint free non-skid ceramic tiles 7 to 8 mm thick area of tiles exc 0.18 sqm but not exc 0.38 sqm etc.in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20 mm thick screed bed in CM (1:6) complete all as specified and as directed
M&L for Glazed ceramic coloured tiles 300x600mmx7-8 mm thick in walls set and jointed in neat cement slurry and pointed in colour slurry including 10mm thick backing coat in cm 1:4 complete all as specified and as directed.
M&L for preparation of newly plastered surfaces with Two coats of cement based paint over a coat of cement based primer complete all as specified and as directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
S&F Unplasticised PVC pipe with fittings & all connections complete fixed to walls, ceilling etc complete for the following sizes :-
20mm bore
25 mm bore
S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall of size 75mm bore complete all as specified and as directed.
S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall of size 110mm bore complete all as specified and as directed.
S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.
S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 75 mm bore provided with access door complete all as specified and directed
S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.
M&L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.
Supply only integral water proofing compound complete all as specified and as directed.
M&L for providing and fixing CP toilet fitting in repairs as specified and as directed by the Engr -in-Charge for the following:-.
Bib Cock CAT No. CON- 037KN of Jaquar or of equivalent make specified here-in-after.
Angular stop cock conforming to CAT No. CON053 KN of "Jaquar" or of equivalent make specified here-in-after.
CP 15mm bore concealed stop cock regular body conforming to CAT No. CON-083KN of "Jaquar" or of equivalent make specified here-in-after.
S & F gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 20mm bore complete all as specified and as directed.
S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm bore complete all as specified and as directed.
S&F oval shaped coloured vitreous china WHB of overall 600mm size including 32mm CP waste coupling, PVC waste pipe etc complete including Pillar cock long neck with aerator conforming to Cat Part No CON -021KN of Jaquar or of equivalent make specified here-in-after complete all as specified and as directed by Engr-in-Charge.
S & F PVC connection 45 cm long 15 mm bore with 2 Nos PTMT check nuts fixed complete all as specified and as directed.
S & F Shelf of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Min Wt 300 Gms) complete all as specified and as directed.
M & L for PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S & F grating doom of PTMT (Minimum wt 25 Gms) 75 to 100 mm dia complete all as specified and as directed.
S & F Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed.
M&L for cuddappa stone pre -polished 40 mm thick as in vertical support for holding bowl type wash hand basin and for shelf etc complete all as specified and as directed.
M&L for Granite (of any type/colour) work (table rubbed and polished) in steps, pillars;window cills/jamb, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as counters of any radius etc laid over 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.
S & F 35 mm thick flush shutters , solid core construction, with block board core & plywood face panels, commercial type on both side with 3mm thick veneer decorative plywood grade-1(with BWR resin) [shade of veneer as approved white ash crown, figured sycamore, red film, Zebroo,white beech, steam beech, white ash , maple(light) of Truwood or century make] fixed on both faces inc. all around edges of flush shutter etc complete fixed with nails including preparation of new wooden surfaces & applying two coats of melamine polish on veneer decorative plywood grade-1 complete including fancy type stainless steel "D" type heacy duty handle (size more than 450mm long), etc complete all as specified & directed.
S&F IInd Class HW (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S & F mild steel electroplated butt hinges 100mm size medium weight complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and as directed
M&L for 2-3mm thick wall care putty including preparation of surface levelled & smooth by using sand paper of appropriate size complete all as specified and as directed.
M&L for preparation of wall/ ceiling surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistance primer including preparation of surface complete all as specified and as directed.
M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )hoisted and fixed in position with all fittings and fixture all as specified in SSR Part-I, capacity 1000 litres incl PTMT float valve with PVC ball 20mm bore of pipe and tank nipple of suitable size complete all as specified and as directed.
M & L Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, 3mm thick non woven, polyester, weighing not less than 3.5 Kg/sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge
M&L for hardcore of broken stone or boulder n.exc. 63mm gauge, deposited, spread, levelled and well rammed including watering to a true surface complete all as specified and as directed
M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate), 75mm thick, laid in alternate bays including finishing the surfaces even and smooth using extra cement complete all as specified and as directed
S&F stainless steel sink 1mm thick with granite top for kitchen, with plug, waste pipe, washers including cantilever CI brackets, connecting union etc & connecting to inlet/outlet for smooth functioning size of sink bowl 410mmx330mmx160mm complete as specified & directed. (Note : Granite Top shall be measured and paid seperately)
S&F aluminium powder coated fixed type double glass Window/ventilator using following sections of 'Jindal Aluminium Ltd' or equivalent in Ajit India Pvt Ltd or crystal Bombay, as approved with & including 4 mm thick one way glass & fixed glazing clips, MS clamps, rubber gasket etc complete all as directed by Engineer-in-charge & fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmx20mm at an interval of 0.5m alround the track incliding drilling holes (a) SP - 20048 (b) DP - 20047 (C ) Glazing clips- 19352
M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like completed all as directed by Engineer-in-charge.
Preparation of new plastered surfaces of wall and applying three coats of white wash on wall complete all as specified and as directed.
M & L for preparation new plastered surfaces of any description and applying two coats of weatherproof exterior emulsion complete all as specified and as directed.
M & L for point wiring with colour coding as per IS with multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS cable conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable drawn through in and including heavy duty PVC concealed conduit of white/ ivory colour including all accessories after cutting chasing in wall of any type /ceiling etc, including GI sunken boxes with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches including PVC insulated multi-stranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-
One light point controlled by one way switch 5 Amp
One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board.
One 3 pin 5 amps socket outlet point controlled by one switch on same board with other switches
All as per Ser. Item No. 73.00 above but with stranded copper 2.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin 15Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal aera) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.
S & F for Modular switch one way 6 Amps, 1 module complete all as specified.
S & F for Modular switch one way 16 Amps, 1module, with neon indicator complete all as specified.
M & L for ceiling rose PVC / polycarbonate isolated body 3 ways terminals, ISI marked complete all as specified and as directed.
S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed
S & F Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified and as directed.
S & F Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified and as directed.
Supply, laying, jointing and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core, laid in trenches / ducts, floors, fixed to pole/walls etc. complete all as specified and as directed.
S&F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP-66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with prewired and necessary mounting arrangement and provision 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape complete all as specified and as directed. (Make : Bajaj Cat Part No. BCLST 25Watt LED / Philips Cat Part No. BRP042 or of equivalent in Wipro)
Supply and fix LED mirror light fitting LINNET 2 long wall mounted type high efficiency 1 x 14 Watt with hight output diffuser and all fittings / fixtures arrangement complete all as specified and as directed. (Make : Crompton Cat Part No. LCL-14-CDL or of equivalent make specified here-in-after)
S&F City 3 decorative wall light fixture made up of polycarbonate, suitable for upto 15 Watt TU retrofit CFL/LED bulb (B-22 base) including 10 Watt LED make Havells Cat part No. LHDL06160099 or of equivalent in Crompton/ Philips complete all as specified and as directed.
S&F sheet metal, 20 Amp single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB 20 Amps, 10 KA breaking Capacity, 'C' series, 240 Volt complete all as specified and as directed.
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note:- Three runs of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit)
M & L for earthing complete with galvanized steel earth plate electrode '60cm × 60cm × 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to galvanized iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanized iron or 4mm dia GI steel wire protected by provision of GI 'medium grade' pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including
Sr. Item No. 86.00 Contd.... provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point all as specified or indicated 'including testing on completion. (NOTE:- GI wire and GI pipe 15mm bore medium grade for encasing GI wire upto 7.50m length per earthing shall be deemed to be included in the unit rate.)
Supply fix MCB DB SPN of sheet metal enclosure SPN 12 way with 100 Amps rated double door bus bar with locking arrangement, 230 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate and making good to disturbed surfaces complete all as specified and as directed.
Supply fix MCB DB SPN of sheet metal enclosure SPN 8 way with 100 Amps rated double door bus bar with locking arrangement, 230 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate and making good to disturbed surfaces complete all as specified and as directed.
S&F MCB SP 6-32 Amps,10KA,'C' series, complete all as specified and directed.
S&F MCB SPN 40 Amps,10KA,'C' series, complete all as specified and directed.
Supply and fixing ceiling fans complete with accessories like down rod, canopy etc, 230 volts, 1200 mm sweep BLDC and minimum air delivery 210 CFM complete all as specified & direcetd. (Make- Bajaj cat No. 250823 or of equivalent in Crompton / Havells)
S&F metal body exhaust fan, AC single phase heavy duty, turbo force 240 Volts of size 300mm sweep with louvers including necessary connection complete all as specified and as directed.
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW, Capacity 25 Litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, Connection piece etc. complete all as specified and as directed.
Material and labour for Reinforced concrete pipes, class NP2 with one collar per length of pipe of dia 100mm, half round (02 Nos for top & bottom) complete all as specified and as directed.
Supply and lay in trenches for cable protection G I Tubing 50mm bore size, light grade complete with all accessories etc complete all as specified and as directed.
Supply and fixing LED light fittings 1x20Watt, 220Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed
M/s.BAJRANG CONSTRUCTION
Santosh Pandurang Pise
Takshashila electricals
M/s DEVRATAN ENTERPRISES
ANIL CONSTRUCTION CO.
REKHA ELECTRICALS
RELIABLE ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .