Loading…
Loading…
Tender Value
₹95.3 L
EMD Value
₹1.9 L
Closing Date
21 Jul 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TEL WORKS
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a)The tenderer must have successfully completed or substantially completed anyone of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed anyone of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Signal & Telecom Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub-letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Signal & Telecom Engineer in writing. Note for Item 15.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Meaning of similar works: Any work involving Supply, Installation, testing & commissioning of IP based Video Surveillance system. OR Any work involving provision of IP-MPLS/VoIP Based System/Data Comm. Equipment/video conferencing system including installation & commissioning of switches/routers.
8 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
ALL REQUISITE DOCUMENT MENTIONED IN tender document MUST BE UPLOADED.
In case, submission of Bid Security in the form of Bank Guarantee, The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e.Excluding the last date of submission of bids). (Authority:-RB Letter No. 022/CE1/CT/GCC-2022/Policy, Dated 20.10.2023)
Item listed under SOR schedule A on Sr. No. 3 should be approved from the Trusted Telecom Portal before the supply as per Railway Board Circular No. 12/2023 vide letter No. 2023/Tele Dev/Trusted Sources dt. 11.10.2023.
Ajmer Division Provision of CCTV Camera on lifts and Escalators over Ajmer Division
SNT-AII-24-2026-27
SNT-AII-24-2026-27
Open
Works - General
180 Days
Ajmer, Rajasthan
₹0
₹1.9 L
21 Jul 2026
24 Jun 2026
7 Jul 2026
87 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 39,87,826.01 | ||
| — | 200.00 | — | — | ||
| DLP Trunk items Supply of DLP trunk 32X20mm with required all changeable internal/external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. make Legrand or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | — | — | — | 26,686 | |
| — | 200.00 | — | — | ||
| DLP Trunk items Fixing & wiring (Laying) of DLP trunk 32X20mm with required all changeable internal/external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. make Legrand or superior. Cable will be supplied by Railway and all other fixing material will be supplied by contractor. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after execution. | — | — | — | 6,672 | |
| — | 28.00 | — | — | ||
| Supply of 8 port Gigabit Managed PoE+ Layer 2 Switch supporting 8 nos 10/100/1000 BASE-T ports, along with 2 Nos of Gigabit SFP ports with SFPs, as per RDSO Specifications RDSO/SPN/TC/83/2020 Rev. 2.1 or latest, Make: CISCO/JUNIPER equivalent or superior. Inspection: RDSO/RITES Inspection Charges: Borne by Railways Payment Terms: 100% after Supply. | — | — | — | 9,17,987.56 | |
| — | 50.00 | — | — | ||
| Supply of 1G SFP module for 20 KM transmission working on single/dual fibre and should support all the software features, environmental standards and security features as mentioned in RDSO technical document no STT/TAN/IP-MPLS/2020 Ver3.0 or latest. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply | — | — | — | 1,89,700 | |
| — | 3050.00 | — | — | ||
| Supply of CAT Cables / Patch Cord items Supply of UTP Cable /CAT6/6A cable ETL or UL or CE3P certified, cable in a roll of 305 meter, TIA/EIA-568.C.2 Category 6 ISO/IEC Class E compliant. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | — | — | — | 1,05,926.5 | |
| — | 28.00 | — | — | ||
| Supply of various OFC termination boxes / FDMS Supply of Fibre Distribution Management system (FDMS)/LIU for 12 Fiber complete with all accessories such as patch cord & pigtail as per TEC Spec. GR/FDM/01/02 April'2007 or latest. This includes supply of installation accessories as per technical specification. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply. | — | — | — | 72,912 | |
| — | 28.00 | — | — | ||
| Supply of various OFC termination boxes / FDMS Installation, splicing and commissioning of Fibre Distribution Management system (FDMS) for 12 Fiber complete with all accessories with patch cord & pigtail as per TEC Spec. with latest amendment. The sundry material if required any to be supplied by contractor. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution. | — | — | — | 58,408 | |
| — | 56.00 | — | — | ||
| Supply of various Optical Patch Cords Supply of SC-APC/SC-APC patch cord (1 meter) (3M, TE connectivity, R&M make or superior) as per TEC Specifications TEC 87070:2009 (TEC/GR/TX/OFJ-01/05/NOV-09) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | — | — | — | 8,056.72 | |
| — | 56.00 | — | — | ||
| Supply of various Optical Patch Cords Supply of 5m length FC to SC Single Mode Simplex/Duplex Fibre Optic Patch Cable as per TEC Specifications TEC 87070:2009 (TEC/GR/TX/OFJ- 01/05/NOV-09). Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | — | — | — | 9,184 | |
| — | 1.00 | — | — | ||
| 19-inch rack items Supply of covered 19" racks 42 U complete conforming to IEC 60297, with all fitting for housing the subrack LER, LSR, SDH ADMs & PD Mux or other equipments as per instruction of Railway Engineer fully wired including, Power supply distribution system, DDF, Internal wiring and other accessories, runway ladder etc. or for other application as per Drg. No. CSTE/NWR/SOR/24. The components of the rack are specified below- (i) Rack size 2035H X 600W X 600D (ii) Fixed side panels 42U X 600D (iii) Front glass door plain 42U X 600D (iv) Rear MS door plain 42U X 600W (v) Levelling screws-4 Nos. (vi) Compact Fan Module working with 48V DC or other voltage - 2 Nos. (vii) Earth connecting kit-1 No. (viii) Cable manager with cable loops-2 Nos. (ix) Krone mounting bracket-01 No (x) Caster with breaks-2Nos (xi) 20" length 1" width 5 mm thickness copper strip with 12 Nos. of holes including SS bolts & nuts for every hole to connect cables-2 Nos. (xii) 10A single pole DC MCB-2 Nos. (xiii) 6 A single pole DC MCB-2 Nos etc. The rack shall be completely wired and equipped with integrated protection modules for all channels as per technical specifications and other stipulations of tender document. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply. | — | — | — | 35,914 | |
| — | 14000.00 | — | — | ||
| Supply of power cable 3 core 2.5 sq mm multi strand (36/0.3 mm dia) sheathed flexible cable as per IS 694:2010 or latest suitable for railway electrification area shall be of reputed make like Delton, LAPP, Finolex, or superior. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after supply. | — | — | — | 14,00,000 | |
| — | 14.00 | — | — | ||
| Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No. RDSO/SPN/197 Version 1.0 dtd. 04.07.2016 or latest and conforming to RDSO Drg. No. SDO/ RDSO/E&B/001. It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17 mm Dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) Copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of 150x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate.(minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipments to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply | — | — | — | 2,95,375.22 | |
| — | 14.00 | — | — | ||
| Installation of Unit Maintenance Free Earth as supplied under item no. 13010300 above It includes: ( i ) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 150 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3-inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm Dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface (minimum copper bonding thickness of 250 microns to made requirement of under writer's laboratories (UL) 467-2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential busbar, copper strips of 150 mm x 25 mm x 6 mm sub equip-potential busbar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO/SPN/197 Version 1.0 dtd. 04.07.2016 or latest and conforming to RDSO Drg. No. S DO/RDSO/E&B/001 or latest. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution and testing. | — | — | — | 1,32,461.42 | |
| — | 1.00 | — | — | ||
| — | 28.00 | — | — | ||
| — | 14000.00 | — | — | ||
| — | 1.00 | — | — | ||
| — | 100.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
GCC2022.pdf
ATTACHMENT
ACS-1GCC2022.pdf
ATTACHMENT
AdvanceCorrectionSlipNo.2.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_3ACS-311.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_4ACS-4.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_5ACS-5.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_6ACS-6.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_7ACS-7.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_8ACS-8.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_9ACS-9.pdf
ATTACHMENT
AdvanceCorrectionSlipNo10nand11_compressed_compressed.pdf Tender Document
ATTACHMENT
SNT-AII-24-2026-27-ProvisionofCCTVCameraonliftsandEscalators.pdf
ATTACHMENT
AdvanceCorrectionSlipNo10nand11_compressed_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .