Special repair works to 1 No. of INS, 4 Nos. of SI and 28 Nos. of PC and HC Quarters for Town Police Station at Ambur in Tirupathur District.

Amount

WATER SUPPLY ARRANGEMENTS 51.1: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres (excluding free board) of approved brand (superior variety) with ISI Mark

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

Electrical arrangements 74 : Charges for fixing of "Fan"

ANNEXURE-I 9.5.1: Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixtures c. In Second Floor

10.5.1: Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) with admixtures (using crushed stone sand) a. In Foundation and basement

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

84.1: Run off the 2 wires of 4sqmm copper PVC insulated single core cable with one run of 7/20GI stay wire suspended with porecelin reel insulators at 1.0m centre to centre for support of phase and neutral cable from top of street pole to the house / flats including all materials etc... all complete for EB service connections including labour charges for fixing GI wire and MS angles (For EB Service connection single phase) (Open wiring)

211.2: Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant and necessary scaffolding if necessary etc., all complete in all respect and as directed by the departmental officers.

214: Dismantling the old damaged brick work in Cement mortar and clearing away from the work site, including labour charges etc all complete and as directed by the departmental officers a) upto 3m height.

218: Dismantling the damaged pressed tiles in cement mortar without affecting the adjacent structures in all floors including the cost of required tools and plants and clearing the debris away from the site etc., all complete and as directed by the departmental officers.

383 : S&F of Cuddapah sink 600 x 600 x 200mm.

384 : S&F of PVC flushing cistern 10 litres capacity

ANNEXURE - II A1: Painting the old walls with two coats of approved Exterior Emulsion Paint of first class quality paint including cost of paint, putty, brushes, watering, curing, thorough scrapping, labour charges etc., etc., complying with relevant standard specification. The paint should be supplied by the contractors at his own cost. (The quality and shade of the paint should be got approved by the Executive engineer before use)

A2: Painting the old walls with one coat of ready mixed plastic emulsion paint of first class quality paint of approved colour and shade over a priming coat on cement plastered/concrete wall surfaces and thorough scrapping including cost of necessary brushes, labour charges, patty etc., complying with relevant standard specification. The paint should be supplied by the contractors at his own cost. (The quality and shade of the paint should be got approved by the Executive engineer before use)

A3: Painting the old Iron work and other similar works such as steel windows ventilators and grills with one coat of approved Ist class synthetic enamel ready mixed paint of approved quality and brand, thorough scrapping including cost of paint, brushes labour charges etc., complete. (The quality and the brand of paint should be got approved by the Executive Engineer before use) complying with relevant Standard specifications.

A4: Painting the old wood work with one coat of approved Ist class synthetic enamel paint including clean removal of old paint using sand sand paper as required by the departmental officers including cost of paint, brushes labour charges etc., all complete as directed by the departmental officers. (The quality and the shade of paint should be got approved by the Executive Engineer before use) complying with relevant standard specifications.

A5: White washing one coat for old walls using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water etc., all complete and complying with relevant standard specifications.

A6: Plastering in C.M. 1:5, 20mm tk. for old walls finished with neat cement (using crushed stone sand) including plasticizer

A7: Pointing the top of Pressed tile roof with CM 1:3,12mm thick with waterproof compound 2% of cement to the existing roof including cost of all necessary groove cutting and finishing etc, complete.

A8: Removal of Cut Stone Slabs / RCC Cover Slabs without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant and necessary scaffolding if necessary etc., all complete in all respect and as directed by the departmental officers.

A9: Dismantling of existing damaged IWC without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant etc., all complete in all respect and as directed by the departmental officers.

A10: Supplying, laying, fixing and jointing the following Dia GI, GM, CI, PVC and MS SpecIals of best and approved quality having ISI mark including cost of specials and delivery at site of work etc., all complete and as directed by the departmental officers. a) 32mm dia GM gate valve

b) 25mm dia GM gate valve

c) 32mm dia UPVC Union

d) 25mm dia UPVC Union

e) 32mm dia UPVC Elbow

f) 25mm dia UPVC Elbow

A11: Supplying and fixing of Aluminium Door Stopper with Rubber Bush with required screws incluidng cost of materials anad labour charges for fixing etc., all complete and as directed by the departmental officers.

A12: Supply and fixing the following electrical items with ISI mark and approved make including cost of materials and labour charges for fixing etc., all complete and as directed by the departmental officers. a) Stepped Electronic 300W / 450W Square Type Fan Regulator

b) 5 Amps Switch (Flush type)

c) 5 Amps 3 Pin & 2 Pin Combined Flush Type Wall Socket only

d) 5 Amps / 15 Amps 3 Pin Flush Type Wall Socket only

A13: Supplying & fixing of 15mm dia CP Pillar tap (Heavy type) for wash basin etc., all complete and as directed by the departmental officers.

A14: Supplying & fixing of 15mm dia CP Angle valve for wash basin etc., all complete and as directed by the departmental officers.

A15: Cleaning the existing Inspection chamber such as sewage water and liquid using 5000 litres capacity vehicles and depositing in same away from the site including cleaning tank with water after disposal, hire and conveyance charges for the vehicles, labours all tools and plants employed there of as directed by the departmental officers.

A16: Supplying and fixing 1 No 30 Amps 500 volts grade/well porcelin fuse unit on suitable teak wood plank to be fixed on the top of the pole / EB street poles with necessary clamps and including cost of materials etc., all complete.

A17: Supplying and fixing of 32 amps double pole main switch with fuse and neutral link on existing Teak wood board including necessary interconnections and cost of all materials, etc., all complete.

A18: Cleaning the sludges in existing drain of size (10.00x0.20x0.45m) etc., all complete.

A19: Supplying and fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the 37cm (15”) size English Brass Letters.

A20: Hire charges for deploying earth moving machinery (JCB/Poclain) for earthwork including diesel, oil and labour charges etc., complete.

A21: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety b) 12 watts LED bulb for bulk head fittings

A22: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A23: Supplying and fixing of water tight bulk head fitting with guard suitable for 12W LED lamp

A24: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A25: Run of main with 2 wires of 1.5 sq.mm. copper PVC insulated unsheathed single core 1.1 kv grade cable with continuous earth by means of 1.5 sqm copper PVC insulated unsheathed single core1.1. kv. grade cable (open wiring)

A26: Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990, (Open Wiring)

A27: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (open wiring) a. Light Point with ceiling rose.

b) Light Point without ceiling rose.

BUILDSAID ENTERPRISES

K RAJAGOPAL

R Murali