Construction of Community hall at Karanampettai AD colony H/O Kodangipalayam

Amount

Construction of Anganwadi Building at Karanampettai AD Colony H/O Kodangipalayam

Earthwork excavation in all clauses of soils and depositing on bank with initial lead and lift for foundation as per ss20B

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete.

Collection and supply of gravel filling in to the basement including cost and conveyance to the siteand all labour charges for filling

Filling in basement with Msand in layers not more than 15cm thick and well rammed, watered and consolidated including all labour charges as per standard specification.

Refilling with Excavated Earth in all etc

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

Basement

Super Structure

Supply & erection of centering for sides & soffits of all R.C.C. works including cost& conveyance of all materials to site and all labour charges etc., complete.

Below Ground level

Above Ground level

Supplying and fabrication of steel rods including cost & conveyance of steel as per std. Specification etc., complete.

RCC 1: 1 1/2:3 mix using 20 mm ISS HBG metal including cost & conveyance of all materials to site and all labour charges etc., complete.

Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials & all labour charges etc., complete.

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials & all labour charges etc., complete.

Paving the FLOORING with scratch proof Printed VERTIFIED TILES of approved quality and colour of size 600*600*8 mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments at 4.00 kg/m2 etc., complete complying with standard specification.

Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick (Using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing of walls with Colour glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm.

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supplying and fixing in Position Ordinary colour glazed indian type water closet quality and approved make with 100mm " p" or "s" trap with double flapped rigit P.V.C Seat level flusing etc

Fabricating supply and fixing and position MS Door , Windows etc

Wiringwith2x1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeconcealedinwallandceilingwithPVCaccessoiresinflushwithwallwith3mmthickhylumsheetcoverwithTWswitchboxand5AFTswitchandmakinggoodoftheconcealedportionwithsuitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) SD 25

Wiringwith2x1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeconcealedinwallandceilingwithPVCaccessoriesinflushwithwallwith150mmx100mmx113mmTWswitchboxwith3mmthickhylemsheetcoverfor5A3pinnoninterlockingwallsocketwith5Aflushtypeswitchwithcontinuousearthwireconnectionof14SWGTCwireandmakinggoodoftheconcealed portion with suitable colour for concealed PVC plug point SD 38

Supplyandrunof4of4sq.mm.(56/0.3)PVCinsulatedSCunsheathedcopperconductorof1100Vgradeon7 / 20 GI bearer wire for service connection mains SD 65

Supplyandrunof2of4sq.mm.(56/0.3)PVCinsulatedSCunsheathedcopperconductorof1100Vgradein25mmdiaGIpipe(Class'B')suitablybentatbothendswithnecessaryangleironuprightandendsupportsformains SD 70

Supplyandfixingofsingleboxtype4'36WfluorescentfittingcompletewithelectronicballastwithTWroundblocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 87

Supplyandfixingof1200mmsweepACceilingfancompletewithsteppedelectronic300Wregulatorwiththeexisting down rod on the existing clamps SD 112

SupplyandfixingofTNEBmeterboardsuitablefor32Asinglephaseserviceconnectionwith32Afuseunit(500V)32Aneutrallinkandearthlink(1"x1/8"copperflat)onTWplankofsize375mmx300mmx19mmwithsupportingTWreepersof1"thickaneithersidewithpaintingwithsuitableboltandnutsforfixingtheTWplankonwallwithearthconnectionandinterconnectionwith7/20PVCinsulatedcopperwirefromEBmetertofuse unit SD 130

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

P.KALIMUTHU (BID ID -1177446)