Spl repair of 4 toilet block at Engr Regt and provn of garden light of Sidi Barrani guest house and Alfa mess and refrigerator, deep freezer for FD Hosp at Old Cantt and provn of ladies toilets next to Bldg at OD fort under GE (East) Prayagraj.

Amount

Demolition of brick / stone masonry work, built in cement mortar complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for providing Cement concrete in foundations, filling and mass concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, staircases, landings and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L RCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in slab supported on wall, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar works complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces for finishing the surface fair and even without using extra cement complete all as specified and directed.

Dismantling old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of area n'exc 0.18 Sqm each, 7-8mm thick thick, as in vertical surface such as skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for joint free non skid ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed

Taking up or down 20mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

S&F 15mm bore medium grade galvanised steel tubes with all fittings and fixed to wall or in floors etc. complete all as specified & directed.

S&F 20mm bore medium grade galvanised steel tubes with all fittings and fixed to wall or in floors etc complete all as specified & directed.

S&F 100 mm bore Cast Iron ‘P’ or ‘S’ trap complete all as specified and directed.

S&F 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets, 32 mm bore PVC flush pipe 600mm long complete all as specified and directed.

S&F in repair vitreous china wash hand basin with pedestal pattern white flat back size 550mm x 400mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F Flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed

S&F in repair grating round/square as suitable 150 mm size with waste hole of PTMT (minimum weight 100 gms) complete all as specified and directed.

S&F in repair bib taps of 15mm bore fancy type, long body, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair for 15 mm bore angle valve cast screwed down, high pressure, with crutch or butter fly handle for iron pipe or for unions complete all as specified and directed. MAKE :- L&K Cat No. 0047 or equivalent as approved by Engr-in-charge.

S&F in repair pillar taps cast copper alloy with capstan heads, chromium plated fancy type screwed down high pressure, with or without letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore fixed in repair complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 dia single socket in any length with rubber ring joint, gasket cup washing, jointed fixed to wall with clamps complete all as specified and directed Note: Clamps shall be measured and paid seperatly under respective item.

S&F in repairs PVC (SWR) pipe 75 single socketed, in any length with rubber ring joints, laid in trenches or in floors including demolition of PCC if needed for removal of pipe complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT, 450 mm length with brass nuts at both ends complete all as specified and directed.

S&F in repair rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20mm bore size (minimum weight 210 gms) complete all as specified and directed.

S&F in repair gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and directed.

S&F 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed

S&F in repair for 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed to walls with clamps complete all as specified and directed. Note: Clamps shall be measured and paid seperatly under respective item.

S&F in repair PVC (SWR) bends any radius, 110mm bore complete all as specified and directed.

S&F in repair two way angle valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle for iron pipe or for unions 15 mm bore, complete all as specified and directed.

S&F in repair health faucet (ABS body) with 8mm dia 1.5 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and directed. MAKE: Model No. ALD-CHR-593 of Jaquar or equivalent as approved by Engr-in-charge.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutters from the frames) complete all as specified and directed.

S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening with fittings as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of Mild Steel tubes for top & bottom rails. Mild Steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the Mild Steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in SSR Part-II complete all as specified and directed by GE/Engineer-in-Charge. Make :- M/s SINTEX or RAJSHREE Plastic or M/s kumar Arch tech Ltd. or equivalent as approved by Engr-in-charge.

S& F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No.) hinges type B-21 100mm long (02 No.) suitable handle (01 No.) complete all as specified and directed

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, 100 mm size type B-21 with galvanised mild steel hinge pin complete all as specified and directed.

S&F 125 mm size aluminium anodised handles, cast type complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for two coats of cement base paint over a coat of cement primer including preparation of new plastered surfaces of walls complete all as specified and directed.

M&L for two coat of oil bound distemper on walls over a coat of primer incl 1 mm thick wall care putty for preparation of new plastered surface complete all as specified and directed.

M&L for applying one coat of cement base paint on old plastered surface of wall including preparing of surface complete all as specified and directed.

M&L mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & directed.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for GI frame work snap grid false ceiling size of grid 605 mm x 605 mm including adjustable hook and wire for false ceiling and section of grid as specified in SSR Part I -2009 complete all as specified and directed.

M&L for 4 mm thick designer non-asbestos fibre cement building board having fire resistance & moisture resistance properly fixed on aluminium grid with screws complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4) complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removing of all rubbish off from the site complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, surface finished even and smooth complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as supply only.

Supply only Liquid water proofing compound.

M&L for applying three coats of white wash on ceiling including preparation of new plastered or unplastered surfaces of ceiling and complete all as specified and directed.

M&L for applying two coats of cement base paint over one coat of alkali resistant primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of white wash including preparation of old surfaces of ceiling and complete all as specified and directed.

M&L for complete removal of existing treatment of walls by scraping with steel scrapers or any other means including filling depressions of scraped surface and applying 1 mm thick wall care putty for smooth preparation of scraped surface and applying one coat of primer and two coats of oil bound distemper complete all as specified and directed.

M&L for applying two coat of cement base paint on old surfaces of wall including preparation of plastered/un-plastered surface complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exc. 1.50 sqm but not exceeding 4sqm each & removing from site complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II complete all as specified and directed.

S&F 4 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed .

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

Demolition of cement concrete (reinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and directed.

M&L for use and waste of form work (rough finished flat ) to soffits of suspended slab such as roof slab etc not exceeding 200 mm thick complete all as specified and as directed

M&L for granite (of any type in one piece) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 20 mm thick screed in cement mortar (1:4) including pointing in white cement mixed with marble dust in ratio (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed

M& L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc. complete all as specified and directed.

S&F in repair Wash hand basin under counter with fixing accessories set size 480mm x 370mm x 200mm shape rectangular complete all as specified and directed. MAKE: Cat No : CNS-WHT-701 of Jaquar or equivalent as approved by Engr-in-charge.

S&F in repair 32 mm dia CP brass coupling complete all as specified and directed.

M&L for Cutting chases pinning in making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades, selfs lintels etc. and cutting chases for concealed for water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified and directed.

M&L for refixing old steel tubing 15 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. Note : Material obtained from item No 11 here in before shall be used.

M&L for refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. Note : Material obtained from item No 12 here in before shall be used.

S&F 75 mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup) complete all as specified and directed

S&F in repair Soap dish, stainless steel, standard size Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 65 to 90 mm size with swivel joints incl shower arm, complete all as specified and directed.

S&F in repair 2 way brass chromium plated bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and as directed.

S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore complete all as specified and directed.

S&F in repair for 15 mm bore stop angle valve fancy type brass chromium plated screwed down, high pressure, with crutch or butter fly handle, for iron pipe or for unions complete all as specified and directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valve less symphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pedestal pan white, including 10 ltrs PVC valve less, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair Vitreous China Half stall type urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe inclusive of fixing supply pipe to flushing cistern, trap and waste pipe and waste coupling complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe.(Minimum weight 60gms) complete all as specified and directed.

S&F in repair1000 litres capacity white colour double layer (ISI markrd), rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc or for shafts, wells, case pits, manholes, pier holes etc n exc 10 sqm on plan area and n exc 1.5 m in depth and getting out complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed

Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm. complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including demolition of PCC if needed for removal of pipe complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) with access door complete all as specified and directed

S&F 110 mm bore PVC (SWR) junction single, (Single T) with access door complete all as specified and directed

S&F 75 mm bore PVC (SWR) branch piece, single (single Y), equal or unequal with access door complete all as specified and directed

S&F 110 mm bore PVC (SWR) branch piece, single (single Y), equal or unequal with access door complete all as specified and directed

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

M&L for mild steel clamps made out of FI 50x5mm and suitable for 100/110mm dia pipe complete all as specified and directed.

M&L for mild steel clamps made out of FI 50x5mm and suitable for 75/80mm dia pipe complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends with access door complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends with access door complete all as specified and directed

S&F in repair 18 mm thick celuka ply of single side prelam/Rigidlam colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete all as specified and directed (Density - 575 to 600 Kg/CBM) (Make : Rajshri plastiwood or equivalent in make as specified in PS)

S&F in repair 30 mm width continuous (piano) Hinges mild steel bright finish of electro galvanised complete all as specified and directed.

S&F in repair fancy type drapery rod 20 mm dia stainless steel, including brackets /side brackets and lattoo, complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed.

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

All as per item No. 108 but for one 5 pin 5 Amp socket outlet point on an independent board with cables of size 2.5 sqmm.

All as per item No 108 but for one 5 pin 5 Amp socket outlet point on the same board with other switch with cables of size 1.5 sqmm.

All as per item No. 108 but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.5 sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 5 pin 5/6 Amp, 230 volts, flush type complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 6 pin 15/16 Amp, 230 volts, flush type complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F sheet metal enclosure (DB) for MCBs, double door type, single pole and neutral 8 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB but with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB Single Pole and neutral, 63 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'B' Curve complete all as specified and directed.

S&F 1 x 18W LED wall mounted tube light fitting, LED 6000K, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Cat part No......................

S&F 36 Watt road/bldg security light luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 32 mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and including connection with three core flexible copper wire of size 1 sqmm from light till ceiling rose complete all as specified and directed. Cat part No......................

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades and frame and louvers complete all as specified and directed.

S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including taking down existing sub main wiring complete all as specified and directed. NOTE: Two run of main wire and one run of conduit & earth wire shall be measured as One unit length.

S&F electric water heater, storage type steel body and heating element up to 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, PVC connection 450 mm long hot and cold (02 Nos.) etc. complete all as specified and directed.

S&F Single pole and neutral sheet matal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed.

S&F Bolard cylindrical shaped cast aluminium LED Bollard light with opauue threaded polycarbonate opal/clear defuser for optimum ingress protection, IP 65, LED 12 W with and inbuilt driver complete with all accessories and its connection with suitable size of wire complete all as specified and directed. Cat Part No....................

Supply, installation, testing, commissioning of Metal Top Deep Freezer of capacity 320 ltrs, 5 star rated, single phase 240 volt, 50 Hz complete all as specified and directed.

Supply, installation, testing, commissioning of refrigerator of capacity 308/310 ltrs, 5 star rated, single phase 240 volt, 50 Hz complete all as specified and directed.

M/s Meena Engineering Enterprises

shweta constructions

SUNSHINE BUILERS

M/S Garg Sons