Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹10.0 L+₹32,007.20 (3.31%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹11.0 L+₹1.3 L (13.5%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹11.1 L+₹1.5 L (15.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹12.2 L+₹2.5 L (25.8%)Rejected-Finance | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹9.7 L
EMD Value
₹19,400
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (R)
AGE (I) CIF (R) C/O 56 APO
PROVN OF NEW TOILET BLOCK AT HQ DARABA OF 16 RR BN UNDER AGE (I) CIF (R).
2023_MES_581258_1
AGE(I)/R-31/2022-23
Open Tender
Civil Works
Item Rate
120 days
DARABA
Class E and above and category a (i)
8 documents required · 8 mandatory
₹500
AGE (I) CIF (R)
₹19,400
Yes
1 May 2023
16 Feb 2023
24 Mar 2023
16 Feb 2023
20 Mar 2023
3 Mar 2023
Amount
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as specified and directed.
Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point., all as specified .
M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as foundation filling and mass concreate, complete all as specified and directed.
Reinforced cement concrete (nominal mix)in beams, cantilevers, bressummers, lintels over 1.5 m span Cement concrete B0 type, 1:2:4 mix (using 12.5 mm graded aggregate), complete all as specified and directed.
Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
TMT steel bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.
Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, contilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough furnished surface of concrete complete flat, all as specified.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed.
M&L for 10 mm thick rendering on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified.
M&L Rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement, complete all as specified.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls, complete all as specified and directed by Engineer-in-charge.
Preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash, complete all as specified and directed.
M&L for hard core of broken boulder n exc 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L 75mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in Sub base/Plinth protection all as spd and directed.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and fiar without using extra cement, complete all as specified and as directed.
Solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, suppling and fixing in opening as per specification and drawing, complete all as specified and directed.
S & F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (stiles) with 2 4 or 6 panels design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specifications and drawings as per SSR Pt-II 2020, complete all as specified and directed.
S & F 100 mm long butt hinges, medium wight cold rolled mild steel, complete all as specified and directed
Supply and fix 150 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt, complete all as specified and directed
S & F 125 mm Mild steel pressed handle oval type stove enameled black, complete all as specified and directed
S & F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane, complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including fixing with beads, nut bolts, welding, etc and removal of old from wooden or mild steel frame as in repairs complete all as specified.
S&F Steel Tubes Medium Grade Bore of tube in 20mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed.
S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed.
S&F 1000 litres Capacity Rotational moulded polyethlene water storage tanks three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long, complete all as specified and directed.
Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 15mm boe iron pipe and fixed in repair. (Minimum weight 20mm-210gms), complete all as specified and directed.
S&F stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified.
S&F 15mm bore Bib taps, cast copper alloy chromium plated,screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge.
S&F fancy type Pillar tap cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.
S&F 15 mm bore stop/angle valve fancy type , chromium plated cast copper alloy screwed down high pressure a handle screwed both ends for iron pipe or union, complete all as specified and directed.
S&F 600mm long CP towel rail fixed with and including chromium plated brass screw and wooden/plastic cleats, complete all as specified and directed
S&F for 110mm bore, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified.
PVC (SWR) 100mm floor trap, plain with gratting, including jointing with solvent cements complete all as specified and directed.
S&F for 100mm dia PVC (SWR) bends any radius, complete all as specified and directed.
S&F 100mm PVC Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches
S & F PVC connection 15mm size with PTMT nuts with length 450 mm long, complete all as specified and directed.
S&F vitreous china wash basin,white, counter type,flat back of size 630 mm x 450 mm with and including waste coupling, angle brackets, PVC waste pipe, complete all as specified and directed.
S&F vitreous china wash down water closet pan (Orissa patern) white with integral foot rest of of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.
S&F low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge.
S&F soap dish type of mild steel chromium plated and wooden/plastic cleats, complete all as specified and directed.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engr-in-charge.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.
M&L for Preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint all as specified.
S&F steel window/ ventilator made of MS tubular frame with double shutter (glazed & wire guage) made out of Z section using flash butt welding hinges shall be provided to both shutters including guard bars and all fittings all as specified and directed.
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil /strata complete all as specified.
M&L for coloure chequered tiles of size 300x300mmx20mm thick or equivalent size as in machine pressed set ,jointed and pointed in neat cement slurry over and including screed bed 15 mm thick in CM 1:6 complete all as directed by engineer in charge.
M & L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed sotne aggregate) as in cover slab and similar articles including necessary moulds/form work set in Cement mortar 1:4, complete all as specified and directed.
M&L for 150 mm thick cement concrete bed to drain pipe type D-2, 1:4:8 (using 20mm grade aggregate s ) incl cradles etc, complete all as specified and directed.
S&F for 150 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
On site CONVENTIONAL type LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, 100 mm thick PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for capacity of 3000 ltr,complete all as specified and directed.
Construction of Soakage well of size 1.2m dia and 3.0m effective depth in excavation in any type of soil foundation in PCC 1:3:6 , walls of honey combed and solid brick work in CM 1:4, RCC M-25/SFRC cover slab filling with bats as shown in drg No TD CE/TD-1202/2003 sheet No 1/2 and 2/2 dt 09.10.2003, complete all as specified in drg, complete all as specified and directed. Note : Rate quoted shall deemed inclusive of dewatering during construction if met with.
M&L for cement concrete type C-1 1:3:6 (20mm graded stone aggregate) in surface channels and drains including necessary formwork complete all as specified.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed by engr-in-charge.
M&L for point wiring concealed type with PVC insulated unsheathed copper cable FRLSH 1.5 sqmm multi stranded two single copper conductor in and including suitable size PVC conduit pipe 20 mm dia complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2 mm thick suitable for modular switch/socket of adequate size including iner and outer white cover plate of modular complete all as specified and directed for followings :-
One light point controlled by one switch 5 Amp.
One socket outlet 5Amp controlled by one switch on same board.
Supply and fixing of modular switch single pole one way 6 Amps 1 module complete all as specified and directed
S&F of modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed.
Supply and Fixing of sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SP, C Curve type of capacity 25 Amp, 10 kA, 240 Volt complete all as specified and directed.
S&F of ceiling rose, surface bakelite 65x50mm three terminals PVC/Polycarbonate complete all as specified and as directed
Supply and fixing of Endura Linear NEO wall mounted LED Batten 20 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.
Material and fixing of PVC/polycarbonate lamp holder insulated body with back plate batten/angle type for batten fitting complete all as specified.
Supply and fixing of sheet metal enclosure MCB distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.
Supply and fixing of MCB single pole 6 to 30 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.
Supply and fixing of MCB SPN 40 to 63 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.
Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 16 Sqmm 2 core, complete all as specified and directed by Engineer-in-Charge.
Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 25×4 mm by means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mm dia MS round bar, excavation and earth work in any type of soil, 20mm dia bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 3 of SSR 2009 Part I connected to equipment, testing on completion, complete all as specified and directed.
M&L GI Earth wire size 4 mm as earth continuty conductor.
Supply and fix of electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete including all connection complete.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of LED Bulbs white /warm white (as per demand) in colour of 15 Watt,B-22 base Cap, complete all as specified and directed.
M&L of sub main wiring with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 4 Sq mm and one run of 4 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and including PVC casing and caping with necessary accessories complete all as directed. Note : 2 Runs of 4 sqmm cable and one run of 4.00 sqmm earth wire with PVC rigid conduit shall be measured as on length.
Excavation in trenches exc 1.5 mtr wide and exc 1.5 m depth and getting out in hard/dense soil for laying UG cables and foundation of poles of various sizes, complete all as specified and directed.
Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed by Engr-in-Charge.
M&L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat, complete all as specified and directed.
Steel tubing galvanized (medium grade) 40 mm bore conforming to IS-1239 for passing cable under road/floor or fixing to poles for protection of underground cable complete with Flat iron 50x6mm clamps made to shape and 12mm dia bolts, nuts and washers for fixing where required. NOTE :- Excavation and earth work shall be measured and paid separatly
Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ Nil during AOC Note:- Tenderers shall not quote for this Schedule
MEHTA OM PARKASH
Kalsi Engineers and contractors
HUSSAIN ENTERPRISES
M/S Dev Raj Sambyal
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .