PROVIDING OF

Amount

Removal of the existing Bituminous concrete layer up to 30 mm by milling machine to correct the ground gradient as per latest FIH guidelines & removal of unserviceable materials from the site as per direction of Engineer-in-Charge including all costs, loading & unloading carriage by mechanical means etc., complete

Disposal of building rubbish / melba I similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground for lead of beyond 10 km up to 50 km for all lifts, complete as directed by Engineer-in-charge.

Providing and applying tack coat using bitumen emulsion (RS1) , including spraying the bitumen emulsion with mechanical equipment, cleaning and preparing the existing road surface as per specifications:

Providing and laying Bituminous concrete Strictly As per FIH Guidelines under the superivision of Turf manufacturer representative / engineer using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, alignment and level by special lazer equipment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineei-in- Charge.50mm compacted thickness with bitumen of grade VG-30 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100- 120 TPH capacity

Supply & Installation of FIH Global Certified Hockey Turf from FIH Preferred Manufacturer having pile height of 13mm both recommended for water or sand dressed hockey international tournaments and national level tournaments, should have following specifications;Composition PE, Structure Monofilament curl, Dtex PE8000, Tape thickness 130μm±15μm, Tape width 0.8- 1.0mm, Pile height 13mm±1mm, Gauge 3/16 inch, Stitches per 10cm 34±1, Stitches per m2 71400 ±100, Total yarn weight 1860g/sqm ±10%, Primary backing "PP + polyester fiber short-staple +, Mesh scrim inlay", Secondary backing Latex, Total carpet weight 3100g/sqm ±10% Installation of Turf should be done using a seam tape & suitable PU adhesive. Adhesive TDS should match the following basic properties; Colour & Form: Grass-green paste, Characteristics: 2 component polyurethane-reaction adhesive, for outdoor use. Specific Gravity: 1480 g/litre., Viscosity: Thixotropic, Solids: 100%., Application: Notched trowel or by suitable machine for applying to Seaming Tape. Shock-pad (cast in-situ) Supply & Installation of 15mm Thick cast insitu shock-pad having Black Styrene-Butadiene Rubber granules size 1-4mm mixed with PU Binder

Providing and fixing 50 mm thick factory made precast RCC drain covers on drains along Hockey ground periphery of sizes 600mm X 600mm , of M-25 grade cement concrete for RCC work, including cost of centering, shuttering. reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways etc i/c cost of cartage. all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Supply & Installation of Automatic Pop-Up Sprinkler system consisting of HDPE pipe of 160mm - 20 meter from water source to corner of the hockey field(Distance between water source & ground corner should not be more than 20 meter If it exceed the cost of 160mm pipe @ 2000/- will be charged extra) & 110mm - 350 meter ring on hockey field periphery of pressure rating 10kg/cm2 conforming to IS:4984 (2016) with Electro Fusion fittings ,6 nos Large Radius Pop-Up Sprinkler of 45 meter radius capable of discharging 14.5 lps @ 6 bar from the periphery with 6 nos nylon glass field solenoid value of 3" inlet size covered with 20" Jumbo Valve box, Programmable single key start controller for auto operation of the solenoid valves and pump through pump start relay with safety valves (Air Release Valve 1" of plastic & Quick Pressure Relief Valve to ease out the pressure in case of any issue with solenoid valve or with system), Automatic Disc Filter with heavy duty metallic clamp (105m3/hr discharge capacity) for keeping the system safe from foreign particle.

Supply and installation centifugal pump set with 50.H.P motor (TEFC 2 pole 3000 rpm) complete with mechanical seal,base frame, coupling, 30 meter single core cable of 16 sq mm copper, Star-Delta Control Panel with single phase preventer, Low level protection censor for dry run protection of the pump complete as per Engineer incharge

Preparation and consolidation of sub grade with power road roller at 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 meters.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil.

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed

Reinforced Cement concrete 1:2 :4 (one cement, two M Sand & four course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by epartmental officer etc., complete. (RCC Works)

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm.

Suply and Fixing of Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on new work.

Plastering Using Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement : 12 mm cement plaster

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Supply and fixing of SITC of Dug out with 11 Seating Capacity with body made of SS -304 , covering with Polycarbonate Sheets of approved shade with special turf wheels for movements etc as per directions of Engineer In Charge

Supply and Installation of Technical Dugout of size 12 feet x 8 feet, 2" MS pipe for structural work 6"base platform, 1.5" MS pipe or support 3 side cover up with 5mm ACP brand alu décor/alu bond 4mm PVC transparent sheet for back cover as per the prescribed standards and as directed by the departmental officers.

Providing and fixing of water tray near the entrances using non skid tiles as per the prescribed standards and as directed by the departmental officers.

Stadium Octagonal Pole Height -17 meter with 20 lights Frame Arrangement Top 250 mm Bottom 650mm Thickness 6/5/5 With Base plate & J bolt With All Accessories Total 6 Nos of Pole. Sports stadium Lights 500 watt LED stadium Light For 1,2 Row 7 degree Lance With optical lance AND 3,4 Row 15 degree Lance with 5 years warranty Water and dust proof IP66 X8, CCT 5700 , LED make cree and Philips or equivalent brand, 2 years pic to pic Replacement and 5 years repair warranty, 10/10/8 Dig M25 grade concrete 5MQ-6mq mall par foundation with all materials and Labor 8/10/12 iron rods *300mm raft ½ ft up on ground Lavel, labor complete civil work with jcb work hydra work with all accessories... Electronics work, Lights installation labor charge, lights focus, wiring. with 120 MCB. 4 MCB box, changeover, busbar, thimbles, 1/2 mm 2core 4000 mtr wire with control panel, with all accessories, with 500 mtr 25 *4/25mtr 70*4mm Armoured copper cable (ready to move) The remaining goods of the company will be returned"

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 cum. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge

Providing of Underground Utilities (PVC Pipe) earthwork excavation for pipe laying works including cost of additional earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of PVC pipes, couplers, jointing materials and required specials, cutting, conveying , laying, jointing and cost of refilling for the additional earthwork etc complete and as directed by the dsepatmental officers.

From Kitchen to Main 180mm Dia PVC Pipe (10KSC)

Plain Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard blue granite metal by volume for levelling course in foundation trenches manholes inspection chambers etc., including charges for scaffolding , shoring , strutting, bailing out water if necessary ramming , consolidating cuing etc., cost and conveyance of all materials complete in all respects complying with relevant standard specifications at all leads &lifts inside the building

Providing Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m2

footing

coloumn

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Supplying, cutting, bending and placing of reinforcement stel of MS, HYSD bars for all type of RCC works at all levels including cost of 18 gauge GI binding wire cost, labour etc., as per design and details complete.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Brick work in CM 1:3 (one cement & Three Crushed Stone Sand (M- Sand) using ground moulded chamber bricks of size 9"X4 3/8"X 2 3/4" standard specification including finishing, curing, etc., complete complying with standard specification - 100cft

Filling with Well Gravel etc., complete complying with standard specification

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Supply and fixing of grill with using 12mm dia square rod and iron flat all necessary material and labour charges for cutting,bending,welding and fixing etc complete

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Plastering in cement mortor 1:5mix (one cement,Four sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor

Plastering in cement mortor 1:5 mix (one cement,Five sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor, and the surface rubbed for smooth and curing to required period, etc complete as per std Specification.

Plastering in cement mortor 1:3 mix (one cement,three sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor, and the surface rubbed for smooth and curing to required period, etc complete as per std Specification.

Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Paving the floor with GRANITE SLAB (SUPER FINE POLISHED WITH MACHINE CUT EDGES) of sizes 1.2m x 0.60m and above of 18mm to 20mm thickness in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 25mm thick and white cement slurly layer of 3mm thick over this, laid in situ and pointed with white cement neatly and fixed in position so as to make perfectly smooth and shining to the alignment including cutting the granite slab to size with machine cutting polishing using different grade of corporandum stone, oxalic acid, tin oxide etc., and including hire charges or polishing machinery etc., complete

Supply and Fixing of FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers

Painting with plastic emulsion paint two coats along with base coat of approved quality (ISI Standard) paint as per the standard specification. (The paint to be used should be got approved by the Executive engineer before use on work)

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supplying and fixing of Wash Hand Basin of size 550mm x 400mm with all accessories such as cast iron Brackets,32mm Dia CP Waste coupling .,rubber plug and Chain,32mmDia B Class GI waste pipe ,15mm Dia G M Wheel Valve 15mm Dia Nylon Connection , 15mm Dia Bress Nipples,15mm cp ,Piller tap Etc

European Water Closet (Colour) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings

Supplying and fixing vitreous china flat back lipped urinal basin including cost of 15 mm CP angle valve, 15 mm PVC inlet connection, 32 mm diameter PVC waste connections, white cement and dismantling masonry necessary and redoing complete.

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A.F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour PVC concealed light or fan point.

Supply and Fixing of 4' 18W LED tube light fitting of approved brand including labour charges for fixing in wall and ceiling with necessaey accessories like clips,screw etc., complete

Supply and Fixing of 18W LED 3000K Square Type Recessed Fitting with LED of approved brand including labour charges for fixing in wall and ceiling with necessaey accessories like clips,screw etc., complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 5A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2x4 Sq.mm (56/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 15A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour for concealed PVC Power plug point.

Supply and Fixing of light of 11W CFL Bulk head Fitteing of approved brand and quality with required materials like pipe, clamp etc

Supply & fixing of UPVC,PVC ,CPVC Pipes & Specials of an approved brand etc., complete

20mm cpvc pipe

20mm cpvc Elbow

20mm cpvc Tee

20mm cpvc FTA

20mm upvc pipe Over Flow

20mm upvc MTA

25mm upvc pipe

25mm upvc Elbow

25mm upvc Bend

25mm upvc tee

25mm upvc valve

25mm upvc end cap

25 x 20mm upvc tee

26 x 20mm upvc reducer

63mm pvc pipe

63mm pvc door Elbow

63mm pvc tee

63mm pvc yee

63mm pvc Elbow

63mm pvc coupler

63mm pvc bend

110mm pvc pipe

110mm pvc door tee

110mm pvc elbow

110mm pvc long bend

110mm pvc yee

110mm pvc shoe

110mm pvc tee

20mm sink cock

20mm long body tap

pillar cock

25mm angle valve

PVC paste 100ml

UPVC Paste 100ml

SS Towel road 1 m

Supply and fixing of rest room cubicle systems with SS danube series HPL sheet with all other require materials etc complete complying with standard specification .

Supply and Fixing of HDPE Tank of 2000 liters capacity of approved brand and quality with required materials etc complete

Supply and fixing of Incinerator of approved brand and quality

Supply and fixing of Mirror of size 1550 x 600 x 6 mm thick including labour charge for fixing extra complete

Labour for the lifting of submersible pumpsets in borewell as per departmental officers instructions etc. complete .

Flushing of borewells of 6" dia requiring less than four hours operation using drills roads by hose will requried size of pipes for various capicity compressor including transportation labour and fuel chargers for compersor as directed bu dept. officers.

Labour for the erection of submersible pumpsets in borewell including fixing and jointing submersible cable with proper claps upto the starter to the required depth and also fixing of riser pipes to the required depth values erection clamps, pressure gauge as per departmental officers instructions etc. complete .

Supply and delivery of borewell submersible pumpset 10HP with vertical type with all accessories with latest FS8034 in general for the following duty conditions the pumpset should have diagonally balanced bronze impler and stainless shaft for motor and pump and directly coupled to a suitable capacity continuous rated three phase fifty cycles 22/440 volts AC supply motor should be as per ISI with upto date amendment. The starter winding should be made from high conductivity PVC insulated 3 core flat copper cable of suitable size of work. Duty 75 LPM X 275 M head.,

Supply for 4mm²x3 core copper insulated flat cable as per departmental officers instructions etc. complete .

Supply and delivery of the following Well water materials approved brand as per list with ISI marking and an approved by corporation officers.

50mm GI pipe B Class

50mm GI Heavy coupling

Supply & Fixing of 3 Phase panel board including all cost of materials and Lavboures etc.,