CONSTRUCTION OF NEW 33 KV LINE

Amount

Safe Loading, Carriage and then safe unloading of the following material from Store Centres Under the jurisdiction of EEESD Ayodhaya to dump site proper stacking.

STP 11.0 Mtr. Long

PCC 9.0 Mtr Long

33 KV Pin Insulator

Disc insulator B & S Type

V Type channel cross arm 100x50x60

M.S. Top Channel 125x65 mm 3200 mm long

ACSR Dog Conductor

M.S. Angle 65x65x6 mm Bracing, 4300 mm long

Stay wire

G.I. Wire 6 SWG for earthing

33 KV 3x300 sq mm XLPE Cable

33 KV Outdoor jointing Kit for 3x300 sq mm XLPE Cable

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 no Channel Cross Arm, as per norms. (Contractor shall provide 3 nos. 33 KV G.I. Pin, necessary clamps, F-brackets, Nut - Bolts, Washers)

Erection of single stud pole support one PCC Pole 9.0 Mtr long with fixing of necessary clamps and other accessories required for erection. (Contractor shall provide necessary clamps, Nut - Bolts, Washers etc)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 11 Mtr ST Pole with fitting of necessary clamp & other acessories like 1 no Channel Cross Arm, as per norms. (Contractor shall provide 3 nos. 33 KV G.I. Pin, necessary clamps, F-brackets, Nut - Bolts, Washers)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of sectional Double pole of 33 KV Line on 11 Mtr ST Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65 mm size, Fitting of Bracing angle as per norms. (Contractor shall provide 3 No G.I. Pin, necessary clamps, Disc Fitting, Nut - Bolts)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Exposure double pole for 33 KV Line on 11 Mtr ST/PCC Pole with fitting of necessary clamp & other acessories like 1 No. Top channel of 125x65 mm size, Fitting of Bracing angle as per norms. (Contractor shall provide 9 No G.I. Pin, necessary clamps, Disc Fitting, Nut - Bolts )

Erection of single stud pole support one ST Pole 11 Mtr long with fixing of necessary clamps and other accessories required for erection. (Contractor shall provide necessary clamps, Nut - Bolts, Washers etc)

Fabrication & Erection of Dead End Double pole on STP support with supply and mounting of necessary clamps and other accessories for holding cable of D/P with clamp as per RESPO Norms. (Contractor shall provide all materials except Poles)

Patrolling on feet and Removal/lopping and chopping of tree branches which are lying in route of 33 KV Overhead New And Old Ex Line.

Nozeling and grouting of stay at sectional pole and extra stay sets at angle locations (All the civil material and stay set will be arranged by the contractor)

Earthing of Pole STP/PCC by 6 SWG Wire by providing and fixing of earthing rod as per norms complete in all respect. (Contractor shall provide all the material Like Earthing rod. )

Stringing, sagging, binding and Jumpering of ACSR Dog conductor. 3 Phase of 33KV Line including fixing,mounting of P.G.clamp suitable for Dog Conductor at sectional point. (Contractor shall provide necessary PG clamps etc)

Jumpering by ACSR Dog Conductor at Sectional pole including providing PG Clamps and necessary clamps & Nut bolts.

Laying of single circuit Cable By Deep Drilling Method In HDPE Pipe 6 inch Pipe Pn-6 ( All the material will be supplied by the contractor except 33KV XLPE cable)

Laying of 33 KV XLPE cable 3X300 sq.mm (Single circuit ). XLPE cable in Cable trench with necessary clips.

High Pressure testing to which 33 KV Line able to be stand for duration of 5 minutes after completion of Laying, Stringing, sagging, binding and Jumpering of ACSR Dog conductor. ( Testing equipment will be arranged by the contractor)

Hoisting of 33 KV Cable on existing/erected support with provision of MS Pipe 150 mm dia 3 mtr long suitable for 3x300 sq mm cable fixing of proper support and its clamping , providing long barral lugs 6 nos and P.G. Clamps & "Y" shape jumpering properly and 02 nos. supporting angle 65X65X6, 3500 mm as per RESSPO Norms. (All material will be supplied by the contractor like MS Pipe , P.G. Clamps, Al. Lug And Supporting Angle 65X65X6, 3500 mm).

Installation of Heat Shrinkable Type cable jointing kits O/D end Termination suitable for 33 KV XLPE cable confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm Dia 20mtr long from ground upto the water level (minimum 60 feet deep) as per standard practice.( Contractor shall provide all materials)

Fabrication, Erection and grouting of cable joint/ route marker. ( Contractor shall provide all materials)

Grouting of 9 Mtr PCC / 11 Mtr STP support structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 9 Mtr PCC / 11 Mtr STP respectively, grouting with 1:4:8 Ratio cement, sand & 20mm Stone Ballast 0.268/0.285 cu mtr for 9 mtr PCC Pole & 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering.(All the necessary material will be supplied by the contractor)

Painting of 11 Mtr S.T. pole with one coat of red oxide, two coats of enamel paint ISI mark. (All required material will be supplied by the contractor)

Hindustan Electric Work

M/s Shukla Enterprises