Extraction of Felt Submersible Cable Delivery Pipe and Submersible Motor Pump Set in Borewell Breaking of Ring and Hiring of Electrical borewell camera and 80mm Submersible Cable and Pipe at TW No. G7 Sec 21 Panchkula and all o

Amount

NS Item:- Lifting & Lowering with special tool for taking out fallen motor pump & submersible cable along with delivery pipe from deep borewell by motor lifting crane machine including manpower & diesel etc at site by expert team by doing the complete job at site

NS Item:- Making of Special Tool & Plant for Extraction of Felt Submersible cable from borewell

NS Item:- Making of Special Breaking of Ring Tool & Plant for Extraction of Felt Submersible Motor Pump set & delivery pipes from bottom depth of borewell

NS Item:- Hammering of Submersible Motor Pump Set with machine for clearance of Borewell depth to lower new motor pump set along with column pipe

NS Item:- Carriage & Transportation charges for line shaft ,welding set ,special tool & plant, borewell camera, motor lifting crane from site to tubewell by canter

NS Item:- Hiring of Electronic Borewell Camera for videography 350’ deep borewell urgently required for internal photography complete in all respect as per entire satisfaction of Engineer-in-charge

Based on HSR 20.11.3:- Providing & fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts & bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge. 150 mm i/d

Based on HSR 24.5.1:- Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-9.Charge. Submersible Copper Cable 3 Core 16 sq mm

Based on HSR 23.22.1:- Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 200 to 250 Amp, 25 KA

NS Item:- Providing & fixing MS flange 4” x 3” with M.S Pipe welding

NS Item:- Providing and fixing of Pump Locking with Flange welding 4 x 3"

Based on HSR EL271:- Providing & fixing M.S. Pipe 80mm dia

Based on HSR 33.15:- Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

NS Item:- Cutting, facing, grinding & welding of New 4” MS Flange (14 mm) on delivery pipe as delivery flange break down during motor fallen into borewell

GMG Traders