Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.6 CrAccepted-AOC AT POST SAIKADE TAL PATAN DIST SATARA MAHARASHTRA | SAIKADE | SATARA | MAHARASHTRA | ₹57.6 Cr Quoted ₹57.3 Cr | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹60.6 CrRejected-Finance FLAT NO 202 RAHUL ENCLAVES S NO 116 7 1 PLOT NO A WARJE PUNE 411058 | PUNE | MAHARASHTRA | 411058 | ₹60.6 Cr | L2 | Rejected-Finance HIGHEST RATE |
| 3 | Rejected-Technical 11 12 VIJAY HAIGHTS SADAR BAZAR SATARA TAL DIST SATARA SATARA 415001 | SATARA | SATARA | MAHARASHTRA | 415001 | - | - | Rejected-Technical Submitted Similar Type of Works not Sufficient as per tender condition Appendix to ITB No.4 |
Tender Value
₹57.8 Cr
EMD Value
₹28.9 L
Closing Date
25 Sept 2024, 5:30 pmClosed
Executive Engineer, Public Works Division, Satara
Executive Engineer, Public Works Division, Satara Pawai Naka Satara
Construction of Palakhi Marg to Muncipal Area Phaltan City from Jinti Naka Phaltan to Malthan Pachbati Chowk Khajina Houd Airport to Giravi Naka Rest House Corner to Deccan Chowk Naka Patil Chowk to Jinti Naka Road, Tal-Phaltan, Dist-Satara
2024_PWDRP_1084143_1
SHORT TERM E-TENDER NOTICE NO. 48 FOR 2024-2025 (form B-2)
Open Tender
Civil Works - Roads
540 days
Tal-Phaltan, Dist-Satara
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,900
₹28.9 L
Chief Engineer Public Works Region, Pune., Central
6 Nov 2024
12 Sept 2024
27 Sept 2024
12 Sept 2024
25 Sept 2024
12 Sept 2024
18 Sept 2024
Amount
Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.
Providing earth work in embankment with approved materials obtained from departmental land or other sources upto lead of 50 Meter including all lifts, laying in layers of 20 Centimeter to 30 Centimeter thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with Vibratory roller to achieve not less than 97 % of standard proctor density excetra complete
Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 meter not less than 97 % of standard Proctor density after laying them in layers of 20 Centimeter. to 30 Centimeter. with Vibratory roller.
Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately excetra. complete.
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material
Supplying hard murum at the road site including conveying and stacking complete.
Spreading hard murum for side width or blindage including sectioning as directed.
Compacting the hard murum side widths layers on each side with Vibtratory roller including artificial watering complete.
Providing and applying Cold plastic paint two component rolled on surfacing material solvent free,high build two pack seamless,tough,skid resistant,material with has property of attaining 2.00 Milimeter thickness in single coat application white (or as required colour )based on glass and colour retaining acralic cross linking resin system for coloured road surfacing including surface cleaning and cost of all material excetra. complete. (All inclusive on bitumen or concrete surface) work shall carried out as per Indiametern Road Congress 35-2015 clause 2.2)
Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 Centimeter high above ground level, painted black and white in 15 Centimeter wide strips, fitted with 80x100 Milimeter rectangular or 75 Milimeter diametermeter Circular reflectorised panels at the top, buried or pressed into the ground and confirming to Indiametern Road Congress 79 and the drawings
Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 750 Milimeter out of 2 Milimeter aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indiametermetern Road Congress:67-2012 Table Number 8.3 Supported with back support frame 25 Milimeter x 25 Milimeter x 3 Milimeter, duly painted on back side with grey stove enamel paint and supported on one no. of Mild Steel angle iron post of size 65 Milimeter X 65 Milimeter X 6 Milimeter, 3.45 meter long, duly painted with with flat oil paint having alternate black and white bands of 25 centimeter width including Galvanised Iron fixtures excetra fixing the boards in M25 grade concrete block of size 60Centimeter X 60 Centimeter X 75 Centimeter including transportation excetra complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.
Providing and Laying of Rumble strips with Plastirib 2K, or equivalent 2 component cold plastic profiled material to give total width of 500 Milimeter and height of 10 Milimeter. Ramp provided to give width of 145 Milimeter, width of ribs to be 55 Milimeter laid at centre to centre distance of 35 Milimeter, with reflective glass beads @ 350 gram / One Square Metre. The finished surface to be levelled, uniform and free from streaks and holes, to be applied on the edge lines, including surface cleaning and cost of all materials excetra. complete.
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 KilograMilimetere tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 Milimeter, 100 Milimeter and 102 +/- 2 Milimeter and with minimum reflective area of 13 Square Centimeter on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diametermeter not less than 19 +/- 2 Milimeter and height not less than 30+/- 2 Milimeter) from the body is to be a minimum value of 500 KilograMilimetere. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recoMilimeterendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retroreflectance of the reflecting panel, to the Engineer.
Providing and laying cement concrete pipe of Indiametern Standard 458:2003 Non Pressure-3 class of 600 Milimeter diametermeter in proper line, level and slope excetra complete.
Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/colour of 2.5 Milimeter thick including 1.5 Refractive index reflectorizing glass beads @250 grames/Square Meter.Thickness of 2.5 Milimeter is exclusive of surface applied glass beads as per Indiametermetern Road Congress 35:2015.Initial Dry reflectivity RL shall be > 250 mcd/ Square Meter/lux measure dintheinitial 7 days and sustained reflectivity RL of 100 mcd/Square Meter/lux and Qd of 100mcd/Square meter/lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner,Easylux, Deltamake capable of measuring RL and QD both according to Indiametermetern Road Congress 35:2015 clause 15.5.The finished surface to be level,uniform,and free from streaks and holes complete as per direction of Engineer-in-charge and inaccordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for Indiametermetern Road Congress 35:2015).
Providing and fixing Road junction / Information sign board of size 0.90 Meter x 0.60 Meter prepared on 16 gauge Mild Steel sheet with angle iron frame of size 35 x 35 x 5 Milimeter including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 Milimeter of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 Centimeter. with 4 Numbers. high strength Galvanised Iron bolts and nuts of size 10 Milimeter diameter. and 20 Milimeter long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 Centimeter x 60 Centimeter x 75 Centimeter size as directed by Engineer-in-charge excetra. complete. Mild Steel Board with Engineering Grade.
Providing and laying cement concrete pipe of Indiametern Standard 458:2003 Non Pressure-2 class of 450 Milimeter diametermeter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing excetra complete.
Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate (natura lsand/VSI grade finely washed crushed sand) conforming to Indiametermetern Standard :383,the size of coarse aggregate not exceeding 25 Milimeter,,cement content not to be less than 150 KilograMilimetere/Cubic Meter,optimum moisture content to bed etermined during trial length construction,concrete strength not to be less than 10 meter paat 7 days,mixed in a batching plant/Weigh batch mixer,transported to site with all leads and lifts,laid with a paver with electronic sensor/by suitable means as approved by Engineer-in-charge,compacting with vibratory roller,finishing,curing and including preparation of sub-grade surface if required excetra complete.
Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to Indiametermetern Standard 3395:1997 below concrete pavement including all materials and labour complete.
Providing and fixing in position TMT FE 500, 32 Milimeter diametermeter dowel bars precoated with anticorrosive epoxy paint of required diametermeter. 60 Centimeters Long and at 30.00 Centimeter Center to Center and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed excetra complete.
Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement,coarse and fine aggregate (naturals and/VSI grade finely washed crushed sand) conforming to Indiametermetern Standard 383,using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013,mixed in a Tilting type Concrete Mixer as per approved mix design,admixtures,spreading, laying compacting and finished in a continuous operation without paver machine,finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound/by providing cement vata in cement Mortar1:[email protected] Meter X 0.60 Meter centre to centre,admeasuring 80 Milimeter at bottom and 40 Milimeter mat top with depth of 75 Milimeter and maintaining the same throughout curing period by any other method approved by Engineerin-charge.
Cutting transverse contraction joints 3 to 4 Milimeter wide and depth 60 Milimeter in concrete slab using concrete cutting machine with diametermetermond studded saw within 48 hours of casting of bay/slab excetra complete including subsequent widening of the groove 8 to 10 Milimeter wide at top having depth of 15 Milimeter as directed by Engineer incharge.
Providing to contraction joints poly suphide sealent (Pouring grade) confirming to BS:5212-1989 in to sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam bacer rod of required diametermetermeter (appraox.25%larger than the initial 3 Milimeter to 4 Milimeter joint) over laid with bond breaking tape as per detailed drawing.Item includes cleaning the joints with water jet/air compressor and allowing joint to be come thoroughly dry be for esealentis applied and applying primer. (A) Contraction and longitudinal joints (15 Milimeter. deep x 8 Milimeter.wide)
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meter beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ra Milimetering, watering including shoring and strutting excetra. complete. (Lift upto 1.50 meter ) By Mechanical Means
Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing excetra complete.(with reversible drum type mixer with Supervisory Control and data acquision with fine agreegates of required specifications (Natural sand / VSI sand finely washed excetra )
Providing and constructing Brick Masonry Inspection Chamber 90 Centimeter x 45 Centimeter x 90Centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover medium duty 140 KilograMilimetere with frame excetra complete.
Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 Milimeter thickness of having a strength of 300 KilograMilimetere/ Square Centimeter of approved quality and shape on a bed of crushed sand of 25 to 30 Milimeter thick including skirting joints and cleaning excetra complete
Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 100 Milimeter thick in M-50 grade of approved size and shape for City streets and roads with high volume/ heavy traffice as specified and as per Indiametern Standard 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 Milimeter thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator excetra. complete.
Providing and casting in situ or precast tapering Reinforced Cement Concrete M-20 Barrier type Kerb without gutter ( as per Indiametern Road Congress 86 1983) embedded 125 Milimeter below ground level over M-10 Plain Cement Concrete finished neatly with Cement Mortar. 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
Providing cast in situ/ ready mix M15 grade cement concrete for head walls of Cross Drainage work/ retaining walls etc.including necessary formwork,compaction, finishing and curing etc.complete.(with reversible drum type mixer/concrete batch mix plant (pan mixer) without Supervisory Control and data acquisition with fine agreegates of required specifications (Natural sand/ VSI sand finely washed excetra ), cement 4.05 bags/Cubic Meter)
Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 Milimeter diameter. 70 Centimeters long and at 30.00 Centimeter. Center to Center and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.
Providing & constructing Brick Masonry Inspection Chamber 60 Cement Concrete x 45Cement Concrete x 90 Cement Concrete including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Gas Stoneware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with Reinforced Cement Concrete Cover.
Providing and fixing of Tactile tiles for footpath of size 300 x 300 Milimeter and 60 Milimeter thick square required shape as per detailed drawings and specifications and as directed by Engineer Incharge for building Works Only.
Providing and fixing Precast Concrete Grating for Tree Girth of 30 Centimeter to 60 Centimeter Section of Size maximum 1500 x 1500 x 75 Milimeter thick machine moulded stream cured cement concrete Perforated slab for tree guard layed over crushed gravel and crush stone in FRP having Circular opening as per requirement on site as per detailed drawing and specification and as directed by Engineer Incharge.
L Type Kerb : Providing and fixing Reinforced Precast- L Shape kerb stone using 6 Milimeter steel bars 4 Number along the kerb length and 8 Milimeter steel bar 500 Milimeter CC vertical Reinforcement, M-30 grade concrete with dimensions 350 Milimeter high, 125 Milimeter thick with built in base of 187 Milimeter x 75 Milimeter including 2 numbers of 50 Milimeter diameter sleeves for services at the top of the base and with top external edge with rounding of 20 Milimeter radius in highly superior Quality Surface and edge finish in 1 meter length and painting as per direction of Engineer incharge (Including excavation for kerbing, lead lift and transportation of excavated material Plain Cement Concrete Below kerbing.)
Stamped Concrete :- Thin Overlay Approximately 1/32" to 5/16" (thicker application may be necessary in stone situations) of Stamped concrete overlays over M-20 Concrete of 100 Milimeter thick surface, Interior, applied smooth, textured or stamped in various patterns and desings using stamps and seamless texture Skins, then antiqued, chemically stained or integrally coloured and sealed with the appropriate coating, system sealers or protective top coats according to the job conditions and specifications (including the cost of M-20 concrete 100 Milimeter thickness)
60 Milimeter shot blasted blocks - Providing and laying of 60 Milimeter thick non slippery concrete paving blocks as per the Indiametern Standard 15628-2006 with face of block, the Block should have exposed aggregate, be shop blasted with colour UV stabilized and made from rich oxides and guarantee by manufacture block to be nanufactured in fully automatic ISO certified vibration compaction machine having strength of M-40 and cured in controlled temperature through mist and fixing on site with all grit manteial and labour included.
Supplying and Fixing Precast Cement Concrete Cylindrical Holard of size as per specifications and 900 Milimeter height (650 Milimeter abobe finish level) nanufactured by M-30 grade of concrete by vibro compaction process using FRP moulds and with washed fine grit finish on the exposed surface of the bollard of approved water base PU paint colour and texture, (Single and Double Strip) as per detail drawing as directed by Engineer Incharge.
Supplying and Fixing Precast Cement Concrete Cylindrical Holard of size as per specifications and 600 Milimeter height (450 Milimeter abobe finish level) nanufactured by M-30 grade of concrete by vibro compaction process using FRP moulds and with washed fine grit finish on the exposed surface of the bollard of approved water base PU paint colour and texture, (Single and Double Strip) as per detail drawing as directed by Engineer Incharge.
Supplying and Fixing Cobbels stone of size 100 Milimeter x 100 Milimeter x 65 Milimeter thick of black colour with natural finish and four side machine cut granite cobells of different Colours and fixing in 1:6 Cement mortar on an average 55 Milimeter thick cement bed. Gaps in two stones to be filled by 1:3 Cement mortar and filter of colour cement with sunk pointing and machine cut straight line looks square shape as per detail drawing and specifications and as per the directed by Engineer incharge including transportation, loading, unloading and all other taxes and excluding GST.
Benches - Providing and constructing benches exposed concrete finish smooth surface natural grey red oxide M-25 grade concrete with all curing excetra complete. Bench 1: Bow Tie.
Benches - Providing and constructing benches exposed concrete finish smooth surface natural grey red oxide M-25 grade concrete with all curing excetra complete. Bench 2: Paper Fold.
Benches - Providing and constructing benches exposed concrete finish smooth surface natural grey red oxide M-25 grade concrete with all curing excetra complete. Bench 3: Symphony.
Providing Sculpture / Statue for City Portion with all fixtures Centering, Scaffolding, Conveying Whichever sanctioned material excetra Complete Stone one colour tone 6 Foot.
Est.No. 132060 of 2024.2025 Providing Decorative Street Light along the palakhi marg in municipal area Phaltan city from Jinti Naka Phaltan to Maltan, Pachbati Chowk Khajina Houd Airport to Giravi Naka, Rest House Corner to Deccan Chowk, and Nana Patil Chowk to Jinti Naka Road Tal, Phaltan Dist. Satara. Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV
Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV
Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90,
Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CC
Supplying and erecting integrated LED round burial light 6W IP65 & IK10 class having pressure die-cast housing, having system lumens output of Min. 500 Lumens, min. efficacy of 85 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of
Supplying and erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with mini
Supplying, erecting and marking SPMCB 0.5A to 5A C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding com
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per s
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per s
Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per sp
Supplying and erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE
Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface to required depth complete.
Supplying and erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 200 x 150 x 150 mm. complete on pole as per specification No. CB-SB
Supplying and erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB
Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickne
Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 63A TPN MCB incomer, 24hr astronomical time switch with minimum 5 Years battery backup, , IP 54 and IK10 protection, 45 A TP contactor for automatic swi
Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP
Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. ( 25 x 5 = 1.2 Kg/m
Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP
Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as pe
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly pla
Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m rais
Supply of Cast Iron Decorative Pole as per Specification - 5 Mtrs. Cast Iron Decorative Pole - Cast Iron Pole given below, having a decorative base 480 mm PCD and decorative vertical sections of cast iron 2080 mm with second part 2345mm, dia. 140 mm OD Pi
Supply of Single Arm Bracket Specification: Architectural custom designed cast iron decorative Single arm brackets which should have nearly 1750mm width, 1050mm height, approx. weight 45 to 50Kg. & aesthetic cast iron elements must be shown clearly. Brack
Supply of Light Fixture as per Specification. - Aluminium Casted architectural custom design based on era-period decorative hanging type light fitting (Height -60 cm), Light fixture should have provision of fixing energy efficient 30W Lamp (LED Panel) for
Supplying, Installing, Testing & Commissioning of Architectural Pole 8 mtr Height double arm made of galvanized iron sections of 140mm,88.9mm & 76 mm dia. The Bracket will be provided with reducer/expander for holding the post top fixture on to the main
Supplying, Installing, Testing & Commissining of decorative luminaire made of spun aluminium body with pressure die-cast heat management PDCHM) and the IP65 optical compartment with high power LED/s is -omprised of a deep drawn chemically polished and co-
Supplying. fixing and commissioning of recessed uplighting Exterior Rated IP66- IP67 Gea Power LED Pro U220 mm Efficiency LED, Luminaire total power: 28.9W, Operating Voltage / frequency: 100-240V/50-60Hz, inrush -current 45A inrush time 0.45 MS. Power fa
Supplying, fixing and commissioning of Reccessed of external rated Lineal lighting system IP65 IP67 Mex Recessed Big LED 24, Real lumens: 370 Real Im/W: 15. Correlated Colour 7 Temperature (CCT): RGBW, Lens / reflector angle: A FLOOD 71 UGR: <=19 Structur
Supplying, Installing, Testing & Commissioning of Architectural Pole 8 mtr Height Single arm made of galvanized iron sections of 140mm,88.9mm & 76 mm dia. The Bracket will be provided with reducer/expander for holding the post top fixture on to the main
Supplying & evening In ground Up light 6 W LED , Stainless Steel finish Round shape housing, having 45. Beam angle (L90/W130/C120)
Supplying & erecting Garden Spike Light 12 Watt CRCA/Die-cast aluminium Powder Coated (Round Shape) housing Black Finish having 30. Beam Angle Spike Mounted LED Fittings (L 110 /W 75/ H 289)
Supplying & Erecting Recess mounted 20 W LED Wall Washers Hilted 70 . Outwards & Swivels 360. To offer best illumination on the wall with any colour with driver complete
22 KV V cross arm with clamp (Sub work No.2 to 4 Total Qty)
22 kv gaurding channel MS 75x40X6 (12.44 kg/channel) (Sub work No.2 to 4 Total Qty)
22 kV Heat shrik Indoor termination joint (Al) kit for XLPE 3 C X 300 sqmm (Sub work No.2 to 4 Total Qty)
22 KV Heat shrik Outdoor termination joint (A1) kit for XLPE 3CX300 Sqmm (Sub work No.2 to 4 Total Qty)
22 kV heat shrinkable Straight through joint kit for 3 C X 300 sqmm (Sub work No.2 to 4 Total Qty)
22 kV Pin Insulators with G.I. Pins (Sub work No.2 to 4 Total Qty)
22 KV Top fitting with clamp (Sub work No.2 to 4 Total Qty)
22KV A.B. Switch (Sub work No.2 to 4 Total Qty)
22KV A.B. Switch, 400 A (Sub work No.2 to 4 Total Qty)
22KV H.G.Fuses (Sub work No.2 to 4 Total Qty)
AAAC 100 mm2 (Sub work No.2 to 4 Total Qty)
AAAC 55 mm2 (Sub work No.2 to 4 Total Qty)
ACSR Weasel (Sub work No.2 to 4 Total Qty)
Alluminium Bobbines for neutral (Sub work No.2 to 4 Total Qty)
Aluminium Bobbins for neutral (Sub work No.2 to 4 Total Qty)
Aluminium Paint for 1 coat (Sub work No.2 to 4 Total Qty)
Aluminium Paint for 2 coats (Sub work No.2 to 4 Total Qty)
Ant To Ant (Sub work No.2 to 4 Total Qty)
Ant To Ant or equivalent AAAC (Sub work No.2 to 4 Total Qty)
Binding Tape (Sub work No.2 to 4 Total Qty)
Binding Wire (Sub work No.2 to 4 Total Qty)
Black Bituminus Paint (Sub work No.2 to 4 Total Qty)
Clamps for 100 x 116 mm RSJ Pole Stay (Sub work No.2 to 4 Total Qty)
Concreting ration 1:3:6 (Sub work No.2 to 4 Total Qty)
Concreting ration 1:4:8 (Sub work No.2 to 4 Total Qty)
Danger Board in yard. (Sub work No.2 to 4 Total Qty)
Disc Insulator 11 KV 70 KN (Sub work No.2 to 4 Total Qty)
Disc Insulator 11 KV 70KN. (Sub work No.2 to 4 Total Qty)
DOG TO DOG or equivalent AAAC (Sub work No.2 to 4 Total Qty)
DTC Metring with Box, single core L.T. XLPE cable (185 sq.mm., 200 mtr length) and other allied material. (Sub work No.2 to 4 Total Qty)
Earthing Sets H.T (Sub work No.2 to 4 Total Qty)
Earthing Sets L.T (Sub work No.2 to 4 Total Qty)
Earthing Sets L.T. (Sub work No.2 to 4 Total Qty)
G.I.Barbed Wire `A' type. (Sub work No.2 to 4 Total Qty)
G.I.Nut Bolts (Sub work No.2 to 4 Total Qty)
G.I.Stay Wire 7/4mm(8 SWG) (Sub work No.2 to 4 Total Qty)
G.I.Strip (25 X 3 mm) (Sub work No.2 to 4 Total Qty)
G.I.Wire 8 SWG/ 6 SWG (Sub work No.2 to 4 Total Qty)
GNAT To GNAT (Sub work No.2 to 4 Total Qty)
GNAT To GNAT or equivalent AAAC (Sub work No.2 to 4 Total Qty)
H.T.Stay Set (Sub work No.2 to 4 Total Qty)
Half round cement pipe ( 150mm X 1mtr) (Sub work No.2 to 4 Total Qty)
HT Pillar 22 KV (Sub work No.2 to 4 Total Qty)
L.A.s 22KV (Gapless type) with disconnector (Sub work No.2 to 4 Total Qty)
L.T. Feedar Pillar 4 Way (Sub work No.2 to 4 Total Qty)
L.T. Mini Feedar Pillar (Sub work No.2 to 4 Total Qty)
L.T. Stay sets (Sub work No.2 to 4 Total Qty)
L.T. XLPE Armoured 3.5 Core cable185 sq.mm. (1.950 km) X 2. (Sub work No.2 to 4 Total Qty)
L.T. XLPE Armoured 3.5 Core cable185 sq.mm. (2.420 km) X 2. (Sub work No.2 to 4 Total Qty)
L.T. XLPE Armoured cable 4core 16sq.mm. (Sub work No.2 to 4 Total Qty)
L.T.Aerial bunched cable(3x120+1x16+1x70) (Sub work No.2 to 4 Total Qty)
L.T.Aerial bunched cable(3x70+1x16+1x50) (Sub work No.2 to 4 Total Qty)
L.T.Dist.Boxes 200 KVA with MCCB (Sub work No.2 to 4 Total Qty)
L.T.Shackle hardware (Sub work No.2 to 4 Total Qty)
L.T.Shackle Insulator (Sub work No.2 to 4 Total Qty)
L.T.Spacers (Sub work No.2 to 4 Total Qty)
LT Feeder Pillar 2/3 Way (Sub work No.2 to 4 Total Qty)
LT Feeder Pillar 6 Way (Sub work No.2 to 4 Total Qty)
LT Shackle hardeware (Sub work No.2 to 4 Total Qty)
LT Shackle insulator (Sub work No.2 to 4 Total Qty)
LT St.through joints for 185 sqmm (Sub work No.2 to 4 Total Qty)
LT Stay set (Sub work No.2 to 4 Total Qty)
M.S. Flats(50 X 6mm) (Sub work No.2 to 4 Total Qty)
M.S.Channel 75x40x6 mm (Sub work No.2 to 4 Total Qty)
M.S.Flat 50 x 6 mm (Sub work No.2 to 4 Total Qty)
MS angle 50x50x6 mm (Sub work No.2 to 4 Total Qty)
MS Channel 100x50x6 mm (Sub work No.2 to 4 Total Qty)
MS Channel 75x40x6 mm (Sub work No.2 to 4 Total Qty)
Providing GI/ HDPE Pipe (Sub work No.2 to 4 Total Qty)
Providing GI/ HDPE Pipe. (Sub work No.2 to 4 Total Qty)
Providing HDD Bore (150mm Dia) For Laying of underground cable. (Sub work No.2 to 4 Total Qty)
R.C.C. Pipe 150 mm 2 M full Round (Sub work No.2 to 4 Total Qty)
R.C.C. Pipe 200 mm 2 M (Sub work No.2 to 4 Total Qty)
Red Bricks (Sub work No.2 to 4 Total Qty)
Red Oxide Paint for 2 coats (Sub work No.2 to 4 Total Qty)
RSJ 116x100, 10 m long (Sub work No.2 to 4 Total Qty)
RSJ 116x100, 11 m long (Sub work No.2 to 4 Total Qty)
RSJ 116x100, 11 m long (stud) (Sub work No.2 to 4 Total Qty)
RSJ 116x100, 9 m long (Sub work No.2 to 4 Total Qty)
RSJ 116x100, 9 m long (stud pole) (Sub work No.2 to 4 Total Qty)
RSJ 116x100, 9 m long(stud) (Sub work No.2 to 4 Total Qty)
RSJ 152x152, 13 m long (Sub work No.2 to 4 Total Qty)
Sand (Sub work No.2 to 4 Total Qty)
Sleve Joints (Sub work No.2 to 4 Total Qty)
SMC Spring Loaded Service Connection Box (16 way) for 3 Phase Incoming and 15 Nos. Single Phase Outgoing Connections (Sub work No.2 to 4 Total Qty)
SMC Spring Loaded Service Connection Box (9 way) for 3 Phase Incoming (R,Y,B) and 9 Nos. Single Phase Outgoing Connections (Sub work No.2 to 4 Total Qty)
Stay Insulator (Sub work No.2 to 4 Total Qty)
Stay Insulators (Sub work No.2 to 4 Total Qty)
Strain Hardware for 55 Sq.mm AAAC (Sub work No.2 to 4 Total Qty)
Strain Hardware for Dog0.1 or Equ.AAAC. (Sub work No.2 to 4 Total Qty)
Sundries (Sub work No.2 to 4 Total Qty)
Sundries such as N/B, Washers, Welding etc. (Sub work No.2 to 4 Total Qty)
XLPE Cable 22 KV, 3C/300 Sqmm.(13M+5M+350M+5M+13M=0.486 km) X 2, (Sub work No.2 to 4 Total Qty)
XLPE Cable 22 KV, 3C/300 Sqmm.(13M+5M+570M+5M+13M=0.606 km)X2, (Sub work No.2 to 4 Total Qty)
R K Chavan Infrastructure Pvt. Ltd.
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid