864/WS-42/2020-21

Amount

Complete removing existing treatment including raping, removing all mud, cake with wire brush and gunny bags from old plastered surfaces and applying 3mm thick white putty in two layers to obtain smooth/even finish using sand paper, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation old plastered surfaces of wall and applying one coat of oil emulsion distemper, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation old plastered surfaces of wall and applying two coats of oil emulsion distemper, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation old plastered surfaces of ceiling and applying one coat of oil emulsion distemper, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation old painted surfaces of wood or wood based articles of any description over 10cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation old painted surfaces of wood or wood based articles of any description over 10cm in width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation old painted steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation and cleaning of new/old surfaces of wood or wood based articles of any description and applying two or more coats french polising to receive smooth surface over and including one coat of wood filler, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered or unplastered surfaces of any description of wall and applying one coat of plastic emulsion paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered surfaces of any description of wall and applying one coat of cement base paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered surfaces of any description of wall and applying two coats of cement base paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered surfaces of any description of wall and applying one coat of apex paint, complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured ceramic tiles, 7-8mm thick (square/ractangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick in CM 1:4 screed bed or bedding layer, complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles of size 350x250mmx7mm / 400X400X7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured ceramic tiles, 7-8mm thick (square/ractangular), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick in CM 1:4 screed bed or bedding layer, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 17.00 above but as on skirting etc., fixed over and including 10mm thick plaster in CM 1:3.

M&L for non skid ceramic coloured tiles, 7-8mm thick (square/rectangular), area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc., set and jointed with neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles of size 300x200x6-7mm thick, best quality as on skirting, dados, walls etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for granite work with 18mm thick slab, table rubbed and polished, as in steps, window cills, cooking platforms and the like in single piece, set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15mm thick screed bed or bedding layer in CM 1:3, complete all as specified and directed by Engineer-in-Charge.

Moulding of sides of granite slab 16-18mm thick, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement 4mm thick of size 600mm x 600mm HSPC (high pressure steam cured) pre-perimetered self embossed, textured designer E-board classic, to be fixed and including GI based power coated snap grid / section armstrong size 600mm x 600mm with main runner 38X24X0.90mm thick, cross tee 28.6X24X0.90mm and wall angle 19X19X0.90mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre bothway, fixed with steel dash fastners or from purlin from the roof with alignment clip, complete all as specified and directed by Engineer-in-Charge.

M&L for powder coated aluminium anodised frame for doors / windows / ventilator / partitions with one or more rebates including joining cleat for fixing etc., complete all as specified and directed by Engineer-in-Charge. Note :- Thickness of powder coating not less than 50 micron.

M&L for powder coated anodised aluminium window and ventilator shutters, side hung type, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 Nos), suitable handle (1 No.), complete all as specified and directed by Engineer-in-Charge. Note :- Thickness of powder coating not less than 50 micron.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick ordinary quality sheet glass, glazing with oil putty in square not exc 0.50 Sqm each pane, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement anodised aluminium partition, powder coated with aluminium section, weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, handles, mortice locking arrangement, anodised aluminium snap beading screws filled with 5mm thick PVC sheet or 5.50mm thick frosted glass, complete all as specified and directed by Engineer-in-Charge. Note :- Thickness or powder coating not less than 50 micron.

S&F in replacement vitreous chine wash down water closet (pedestal pattern) white, complete including connection to drain pipe and to flushing pipe, anti-syphonage pipe etc., complete all as specified and directed by Engineer-in-Charge.

S&F in replacement vitreous china squatting pan, Orissa pattern of size 580mm x 440mm white with including foot rests and including CI 'P' trap but excluding flushing cistern and flush pipe but including provision of PCC 1:4:8 type D-2 bedding, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement vitreous china, white, wash hand basin, flat back of size 550mm x 400mm (Padestal pattern) including MS brackets and cutting for and pinning ends including 32mm dia PTMT waste coupling in full threaded (minimum weight 45gms) but excluding waste pipe, waste fittings etc., complete all as specified and directed by Engineer-in-Charge.

S&F in replacement plastic water closet seat cover of any colour, closed pattern with recessed bottom cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., complete all as specified and directed by Engineer-in-Charge.

S&F CP jet spray including CP flexible pipe for EWC and fixed.

S&F in replacement chromium plated health faucet, telephonic type with CP flexible arms 1.0 mtr long, suitable to fixed to 15mm bore CP angle valves, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement chromium plated toilet paper holder fixed with brass screw, complete all as specified and directed.

S&F in replacement centre hole mixer for mixing hot & cold water, suitable for wash hand basin, cast copper alloy with dual capstan head, chromium plated, screwed down, high pressure with lettered Hot & Cold with long screwed shanks and fly nuts, screwed for iron pipe, suitable for 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement shower rose, over head type, size 100x100mm, square in shape, single flow, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement 15mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement CP tubular towel rod, 60cm long between flange, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement CP soap dish, heavy duty, fixed with cadmium plated brass screws, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement corner glass shelf (with brackets), complete all as specified and directed by Engineer-in-Charge.

S&F in replacement glass shelf assembly, consisting of 5.50mm thick sheet glass, 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed by Engineer-in-Charge.

Taking down shutter with frame of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement with all fitting and fixtures and fixed at site, complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS square tube and fixed at site, complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick 2nd class hard wood glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) for window/ventilator, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I (Specifications) (2009), Section 8, Clause 8.24(b), complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed by Engineer-in-Charge.

S&F in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed by Engineer-in-Charge.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified.

S&F 150mm size aluminium handle, cast type, anodised, complete all as specified.

S&F 100mm long butt hinges, medium weight, cold rolled, mild steel, complete all as specified.

S&F 250mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surfaces of wooden or wooden based articles of any description, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-in-Charge.

M&L for 2nd class soft wood, clean sawn timber, fixed in scantling, complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed at site, complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantling, 40 Sqcm and over in section, in any position, complete all as specified and directed by Engineer-in-Charge.

Dismantling water tank and removing to store, exc 500 Ltrs but not exc 1000 Ltrs capacity, complete all as specified and directed by Engineer-in-Charge.

S&F 1000 Ltrs capacity rotational moulded polythylene water storage tank, tripple layered, white in colour (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia ball valve, connecting up pipes, complete all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated sheet of any gauge and thickness of roof covering etc., complete all as specified and directed by Engineer-in-Charge.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' or 'J' type or cranked hook, bolts and washers in lieu of screws as in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by Engineer-in-Charge.

S&F 0.63mm thick plain, galvanised, mild steel sheeting as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) fixed with 'L' or 'J' type or cranked hook, bolts and washers in lieu of screws with grade of zinc coating 275, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surfaces of steel or iron of any description, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-Charge.

M&L for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, having rubber hard top finish with polymer admixture, set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment over and including 20mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 66.00 above but 20mm bore.

S&F 15mm bore GI water tubing, medium grade with all fittings and fixed to wall, floor and ceiling etc., complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 68.00 above but 20mm bore.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed by Engineer-in-Charge.

Dismantling wall / ceiling boards of any description, fixed in any position with nails, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sink with drainage board, made of stainless steel 1.0mm thick, suitable for kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or including cast iron cantilever brackets of suitable size and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer-in-Charge.

M&L for rolled mild steel work in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates, etc. Fe 410 -W (GdeE- 250), quality-A, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) as in ground floor and paving, not exc 15cm thick below or above ground level, complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted built in CM 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

S&F 20mm thick 2nd class hardwood boarding, fixed with nails as in shelves, partition and shelves of built in cupboards, almirahs, almirahs book case, toilet boxes racks, pelmet and similar work, plain one side with bult joints, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block of any shape and size, confirming to IS-15658-2006 of 60mm thickness, M-35 Grade, laid with grey cement and no pigment, over and including 25mm thick sand cushioning, complete all as specified and directed by Engineer-in-Charge.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished even and smooth without using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5 mtr and at corners as mandatory and filled with sealing compound Grade 'A', complete all as specified and directed by Engineer-in-Charge.

S&F 19-20mm thick prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge.

S&F decorative moulding / beading, area exc 3.0 Sqcm but not exc 6.0 Sqcm in section, fancy type, complete all as specified and directed by Engineer-in-Charge.

S&F continuous piano hinges, mild steel, bright finish or electro galvanised, width of flap 30mm when open, complete all as specified and directed by Engineer-in-Charge.

S&F brass knob, suitable for cupboard (As approved by GE), complete all as specified and directed.

S&F 100mm size brass handle, cast type, polished bright, complete all as specified.

S&F in replacement fancy type curtain rod, anodised aluminium alloy including suitable backets, stop, rollers etc., complete all as specified and directed by Engineer-in-Charge.

M&L for lagging to 15mm bore pipe, used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed SNAPON section of sensity 144Kg/Cum, confirming to IS-9842, provided with chicken mesh netting 25 gauge 20mm mesh binging wire and reinforecement with plaster of paris, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 91.00 above but 20mm bore pipe.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets of any thickness including cover fillets, complete all as specified and directed by Engineer-in-Charge.

S&F 6mm thick plywood (05 Nos ply), Grade BWR, type BB, commercial type as in ceiling, fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hardwood plain fillets, (square/rectangular), area not exc 3.0 Sqcm in section, clean sawn, secured with nails or breads, complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hardwood plain fillets, (square/rectangular), area exc 3.0 Sqcm but not exc 6.0 Sqcm in section, clean sawn, secured with nails or breads, complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hardwood plain fillets, (square/rectangular), area exc 13.0 Sqcm but not exc 25.0 Sqcm in section, clean sawn, secured with nails or breads, complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed by Engineer-in-Charge.

M&L for RCC 1:1.5:3, type A-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roof landing, balconies, deck slab and shelves and the like, complete all as specified and directed by Engineer-in-Charge.

Formwork for rough finished surfaces of concrete to sides and soffits of floor beams, roof beams, beams, haunchings, girder, lintels, cantilevers, shelves including supports overhangs etc. complete all as specified and directed by Engineer-in-Charge.

S&F in replacement stainless steel sink, 1.0mm thick, suitable for kitchen or laboratory, with plug, waste pipe, washers including cast iron cantilever brackets of suitable size, connecting union etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm, complete all as specified and directed by Engineer-in-Charge.

M/S Vivek Gupta and Co

M/s Lal Enterprises

M/S TAJ DIN KHARI

M/S DFA Enterprises

M/S Himalayan Construction and Co.

M/S SUHEEL CONSTRUCTIONS