WBPHED/EE/AMD/NIeT-32 of 2024-2025/2

Amount

Intake Pump House, Sub-station with Yard Portion:-

Supplying and Fixing SS water proof looping cable box having hinged SS Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.(For 12 Nos Street light of Sub-Station Buliding)

Laying of cable 4 Core X 10 Sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.( As Per Periphery of Sub-Station of Building)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:-4 Core X 10 Sqmm.

Fixing outdoor type 90 Watt Street light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.

Earthing with GI earth spike(1822mmX20 mm) and grouted the same under the ground level as per direction.

Connecting the pole to earth busbar including S & F GI (Hot Dip) wire of size as below,spiral on pole body as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages-8 SWG.

Administrative Building:-

Supply and fitting fixing of 200 Amp, 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc, spacious sheet steel enclosure, separate cable gland box not required, terminal shrouds on both sides and phase barriers included, conforms to IEC 60947-3, IS/IEC 60947-3, suitable for DIN fuse-link, door interlock & padlock facility incl. S & F 3 nos. DIN type HRC fuse-200 Amps rating on angle iron frame.(Make- Approved Make)

Supplying & fixing sheet metal (16 SWG), 200 Amps, Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD SpecificationBook – May 1991)Dimension of Cu. Bars [85mm long]-4 x 20x5mm, Dimension of Sheet Metal Box-500x150mm.(Make- Approved Make)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish.2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC, Average run 11 mtr.(Horizontal & Vertical Run, Switch Board Concealed)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 6 Way Enclosuer.(Make- Approved Make)

Supplying and fixing 6-32 Amp, 240 V SPMCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Supplying and fixing. 40 Amp, 4 Pole, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.

Supplying and fixing, 40 Amp, DP, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.25 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. a) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC.

b) 2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC.

c) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. A) 2.5 Sqmm.

b) 4 Sqmm.

c) 6 Sqmm.

d) 10 Sqmm.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

18 Watt LED Ultra slim surface-mounting round LED downlighter designed with excellent thermally managed aluminium pressure die-cast housing with heat-dissipating fins for larger surface area finished in epoxy powder-coated white to deliver high-efficacy light output and uniformity, utilising edge-lit technology or euivalent.(Make Approved Make)

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)

Supply and fitting, fixing 3 Blade 1200 mm Sweep ceiling fan, 220V-240V,50 Hz,AC.(Make:-Approved Make)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supply of 300 mm sweep exhaust fan 220-240 Vac, 50 Hz.(Make-Approved make)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:30 cm (12")

Supply and fitting fixing of Exhaust fan duct( Size-300 mm X 300 mm X 400 mm long) -as per direction.

Supply and fitting fixing of Exhaust fan duct( Size-230 mm X 230 mm X 400 mm long) -as per direction.

Annex Biulding:-

Supply and fitting fixing of 200 Amp, 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc, spacious sheet steel enclosure, separate cable gland box not required, terminal shrouds on both sides and phase barriers included, conforms to IEC 60947-3, IS/IEC 60947-3, suitable for DIN fuse-link, door interlock & padlock facility incl. S & F 3 nos. DIN type HRC fuse-200 Amps rating on angle iron frame.(Make- Approved Make)

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD SpecificationBook – May 1991)Dimension of Cu. Bars [85mm long]-4 x 20x5mm, Dimension of Sheet Metal Box-500 x150mm. (Make- Approved Make)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish.2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC, Average run 11 mtr.(Horizontal & Vertical Run, Switch Board Concealed)

Supplying and fixing 10 Amp, 240 V, SP, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Supplying and fixing, 40 Amp, DP, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.25 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. a) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC.

b) 2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC.

c) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. A) 2.5 Sqm

b) 4 Sqmm.

c) 6 Sqmm.

d) 10 Sqmm.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply and fitting fixing of Exhaust fan duct( Size-300 mm X 300 mm X 400 mm long) -as per direction.

Supply and fitting fixing of Exhaust fan duct( Size-230 mm X 230 mm X 400 mm long) -as per direction.

Sludge recirculation Pump House:-

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish.2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC, Average run 11 mtr.(Horizontal & Vertical Run, Switch Board Concealed)

Supplying and fixing 6-32Amp, 240 V SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Supplying and fixing, 40 Amp, DP, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Supplying and fixing 32 Amp, TP, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Supplying and fixing, 63 Amp, TP, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.25 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. a) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC.

b) 2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc.,including supplying sockets, tapes. A) 2.5 Sqmm.

B) 4 Sqmm.

c) 6 Sqmm.

d) 10 Sqmm.

Supply of 300 mm sweep exhaust fan 220-240 Vac, 50 Hz.(Make-Approved make)

Supply of 230 mm sweep exhaust fan 220-240 Vac, 50 Hz.(Make-Approved make)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:30 cm (12")

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:23 cm (9")

Supply and fitting fixing of Exhaust fan duct( Size-300 mm X 300 mm X 400 mm long) -as per direction.

Supply and fitting fixing of Exhaust fan duct( Size-230 mm X 230 mm X 400 mm long) -as per direction.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required.2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

Sub-Station Building Portion:-

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish.2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC, Average run 11 mtr.(Horizontal & Vertical Run, Switch Board Concealed)

Supplying and fixing 10 Amp, 240 V SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Supplying and fixing, 40 Amp, DP, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make- Approved Make)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. a) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. A) 2.5 Sqmm.

b) 4 Sqmm.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply of 300 mm sweep exhaust fan 220-240 Vac, 50 Hz.(Make-Approved make)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:30 cm (12")

Supply and fitting fixing of Exhaust fan duct( Size-230 mm X 230 mm X 400 mm long) -as per direction.

Supply of 19 mm dia GI Conduit 1.6mm thick.(Approved make)

Supply of GI Bend/Elbow.

Supply of GI saddle etc …

Two way Circular Box & cover.

One way Circular Box & cover.

Supply of G.I. plain tee of approved brand and make.

Labour for fitting and fixing 19 mm dia 1.6mm thick G.I. Conduit above ground (exposed) in the wall with previously supplied saddle clamps including cost of jointing materials,holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required.2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

Yard of Intake:-

Supply of 45 Watt, LED, LED Post-top IP65 elegantly designed spun aluminium and high grade aluminium heat sink for efficient thermal management, sturdiness and excellent corrosion resistance. MS base provided to support the housing. Powder coated black after phosphocromate treatment.(Make-Approved Make)

Supply of G. I. pipes of TATA/Approved make including necessary sockets, 50 mm dia with socket.

3 CoreX 2.5 Sqmm industrial flexible copper cable wire/dia- 30/0.25 PVC insulated with PVC sheathed.(Make:-Approved Make)(For 8 Nos Street light from Post Top)

Supplying and Fixing PVC water proof looping cable box having hinged PVC Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.(Make:-Approved Make)

Supply of 2 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.(Make:-Approved Make)

Laying of one No 2 Core X 10 Sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core X 10 Sqmm.

Fitting & fixing of the outdoor lighting luminaries along with new post top with GI Pipe etc, accessories to the pole and sub-station building etc as per direction of EIC.

Security Room with Toilet Lighting:-

Supply and fitting, fixing 3 Blade 1200 mm Sweep ceiling fan, 220V-240V,50 Hz,AC.(Make:-Approved Make)

4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps.(Make-Approved Make)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(2+8 way)(Make-Approved Make)

Supplying and fixing, 40 Amp, DP, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make:-Legrand)

Supplying and fixing, SP, 6-32 Amp, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.

Fixing only 22 watt LED Tube light fitting complete with all accessories directly on wall/ceiling by screws etc.

Supply of 2 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.(Make:-Approved Make)

Laying of one No 2 Core X 10 Sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.(From Panel Feeder To DB)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :2 core 10 sqmm cable.

25 Watt, Bulk Head LED, Integral high-efficiency IP65 LED well-glass luminaire with aluminium die-cast housing and bowl-shaped polycarbonate diffuser, offering potential for high energy savings over conventional luminaires.(Make-Approved Make)

Supply of 230 mm sweep exhaust fan 220-240 Vac, 50 Hz.(Make-Approved make)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:23 cm (9")

Supply and fitting fixing of Exhaust fan duct( Size-230 mm X 230 mm X 400 mm long) -as per direction.

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Supply of 17 Watt LED Bulb with Lumen Out put-1700 lm.(Make-Approved Make)

Fitting & fixing of the indoor lighting/LED Bulb luminaries along with new mountings and accessories to the pole etc as per direction of EIC

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. a) Average run 6 mtr.

b) 6A 3 pin Modular type plug socket & switch (Brand approved by EIC)On Board.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. A) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Yard of WTP and Pump House Extra:-

90 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system or equivalent.(Make-Approved Make)

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. A) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

Supplying and Fixing PVC water proof looping cable box having hinged PVC Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.(Make:-Approved Make)

100 Watt. LED Flood light high efficiency IP66 , with pressure die cast aluminium housing and toughened glass infront with unique flood optics to ensure uniform distribution or equivalent.(Make-Approved Make)

Supply of 5 Core X 2.5 Sqmm industrial flexible copper cable wire/dia-50/0.25 PVC insulated with PVC sheathed. (Make:Approved Make)( For Ring Lighting arrangement)

Earthing arrangement for Pump house and electrical installation as per ISS and IE rules and as per technical specification of NIT. (Earth Pit 8 Nos)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Supply of MSPU painted decorative 3 Mtr post off lantern for having bottom dia 90 mm X 3.5 mm thickness into 2000 mm long, top 60 mm X 3.2 mm X 1000 mm long base plate 200 mm X 200 mm X 10 mm and PDC 200 mm and foundation bolts, M-16 X 450 mm X 4 Nos and inbuilt J Box.(Make:-Approved Make)

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Supply of 30 Watt, LED Post-top IP65 elegantly designed spun aluminium and high grade aluminium heat sink for efficient thermal management, sturdiness and excellent corrosion resistance. MS base provided to support the housing. Powder coated black after phosphocromate treatment or equivalent.

Supply of 3 Core X 1.5 Sqmm industrial flexible copper cable wire/dia-50/0.25 PVC insulated with PVC sheathed. (Make:-Approved Make)

Fitting & fixing of the outdoor lighting luminaries along with new accessories to the pole, Gate and O.H.R. Wall etc as per direction of EIC.

4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.(From Pole to Pole)(Make:-Approved Make)

Laying of one No 4 Core X 10 Sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.(From Pole to Pole)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :4 core 10 sqmm cable.

Supplying and fixing, 6-32 Amp, SP, 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

100 Watt High efficiency round LED high-bay luminarie with aluminium die cast housing with high lumen efficiency of>130 lm/Watt, a perfect energy-saving solution with IP65 Protection or equivalent.(Make:-Approved Make)(For High Lift Pump House)

Fixing only High Bay Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Supply of 45 Watt, LED Post-top IP65 elegantly designed spun aluminium and high grade aluminium heat sink for efficient thermal management, sturdiness and excellent corrosion resistance. MS base provided to support the housing. Powder coated black after phosphocromate treatment or equivalent.(For Gate Light)

Fitting & fixing of the outdoor lighting luminaries along with new accessories to the pole, Gate and O.H.R. Wall etc as per direction of EIC.

Supply of 45 Watt Integral high-efficiency IP65 LED well-glass luminaire with aluminium die-cast housing and bowl-shaped polycarbonate diffuser, offering potential for high energy savings over conventional luminaires or equivalent.(Make-Approved Make)

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(6 way).(Make-Approved Make)

Supply of 300 mm sweep exhaust fan 220-240 Vac, 50 Hz.(Make-Approved make)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:30 Cm (12")

Supply and fitting fixing of Exhaust fan duct( Size-300 mm X 300 mm X 400 mm long) -as per direction.

Supply of 450 mm sweep exhaust fan 220-240 Vac, 50 Hz.(Make-Approved make)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:45 cm (18")

Supply and fitting fixing of Exhaust fan duct( Size-450 mm X 450 mm X 400 mm long) -as per direction.

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. a) Average run 10 mtr.

Add GST @ 18%

Add CESS @ 1%

ORIENTAL ENGINEERING CO. (BID ID -5822265)

DEBJYOTI BASU (BID ID -5884714)