Development of Selfie Point with Central Attraction (Lion, Lioness and Cub Sculpture on Rock) and Interactive Information Panel at Lion Safari, Vasona, Forest Department, Wildlife Division, Dadra and Nagar Haveli (2nd Call).

A male Lion and lioness with a cub on rock Life Size realistic 3D model seating on rock. Installation at site with necessary platform. A. Standing alone male a. Height: 40 inches at Shoulder b. Length: in proportion of shoulder height c. Tail – 32 inches B. Seating Lioness a. Height and length in proportion of seating position C. Rock (Size will be varied according to the position of lion model setup) D. Lion cub (Actual Size) • The life size 3D model of animal to be displayed here are made from fiberglass and composition of high performance of resin. • The process of model making would follows and needs to show the proof (photo-video) of the same. • Clay modeling of behavioral pose (from approved reference/concept) • Die making, Casting, and finishing. • Realistic Painting work • Please note previously used or pre-dyed cast models will not be accepted. Transportation and installation at site. • Masonry platform will be constructed to fix rock and lion model • Size of 8ft. Length and 4ft. Width while height will be 15 inches • Flex stone should be cladded to give rocky and natural look. Size : Life Size

Information about different lion through interactive way Outdoor grade material and lion puzzle game made from MS steel pipe and mix media for children where they can get information about different lion with fun • Onto this 3” Sq. hollow tubular section of M.S. fabrication with Height - 7ft. and 5ft. Length. • 3 vertical round pipes fix in which puzzle square fitted through bearing lock mechanism. • Structure should be painted with Zinc oxide primer and PU coated paint for attractive look and weather protection. • Puzzle square made from MS angle pipe and welded in centre Bearing mechanism for smooth rotation. • Outer surface should be cladded with 3mm ACP sheet. • A lion distribution, info and picture concept should be prepared and approved from the authority. • An approved concept print on outdoor grade 3M eco-vinyl with mate lamination and pasted on ACP puzzle square. • Structure should be installed through cement work at site. Size : 5'5" X 5'5"

Physiology of Lion An informative panel where lion anatomical information display through some 3D relief character and through printed design media. Specification: • Board Size: 13 X 7 ft Landscape • Layout board frame: To clad ACP, A Ms Square pipe frame design and fix between standing pole with nut bolt mechanism. • Standing pole consist three in number from 3 inches MS square pipe. and welded in horizontal bar to given strength. • Pole height from ground: 8ft • Anchor fastener Foundation depth: 1ft • Pole Colour: coated with zinc primer and cover with PU coated oil paint (Yellow colour) • Aluminium Composite Panel should be 3mm thick. It should be exterior face coil coated. Interior face coil coated with polyester. • Vinyl media should be 3M and its equivalent quality, Outdoor grade and weather resistant. • All photographs, content, graphics should be created by agency and have copyrights of all photographs, content, graphics and all other things used in panels. Final design should be approved by committee appointed by the dept. • 3D relief structure of Lion skull, claw and tongue made from FRP material and fix on vertical position in left side section. Size : 8' X 10'

Anatomical comparison with lion subspecies A comparison of three different species of lion and their information printed on vinyl. Specification •Board Size: 10 X 7 ft. Landscape •Layout board frame: To clad ACP, A Ms Square pipe frame design and fix between standing pole with nut bolt mechanism. •Standing pole consist two in number from 3 inches MS square pipe. and welded in horizontal bar to given strength. •Pole height from ground: 8ft •Anchor fastener Foundation depth: 1ft •Pole Colour: coated with zinc primer and cover with PU coated oil paint (Yellow colour) •Aluminium Composite Panel should be 3mm thick. It should be exterior face coil coated. Interior face coil coated with polyester. •Vinyl media should be 3M and its equivalent quality, Outdoor grade and weather resistant. •All photographs, content, graphics should be created by agency and have copyrights of all photographs, content, graphics and all other things used in panels. Final design should be approved by committee appointed by the dept. Size : 8' X 7'

World Cat Comparison A comprehensive information of global big cat and interesting in single panel. Design, develop and printed on vinyl. Specification: •Board Size: 10 X 7 ft •Landscape •Layout board frame: To clad ACP, A Ms Square pipe frame design and fix between standing pole with nut bolt mechanism. •Standing pole consist two in number from 3 inches MS square pipe. and welded in horizontal bar to given strength. •Pole height from ground: 8ft •Anchor fastener Foundation depth: 1ft •Pole Colour: coated with zinc primer and cover with PU coated oil paint (Yellow colour) •Aluminium Composite Panel should be 3mm thick. It should be exterior face coil coated. Interior face coil coated with polyester. •Vinyl media should be 3M and its equivalent quality, Outdoor grade and weather resistant. •All photographs, content, graphics should be created by agency and have copyrights of all photographs, content, graphics and all other things used in panels. Final design should be approved by committee appointed by the dept. Size : 8' X 10'

Geographical distribution of Lion with history An origin of lion, Geographical distribution, Journey of Asiatic Lion all interesting information present though visual content. Specification: •Board Size: 12 X 7 ft •Landscape •Layout board frame: To clad ACP, A Ms Square pipe frame design and fix between standing pole with nut bolt mechanism. •Standing pole consist two in number from 3 inches MS square pipe. and welded in horizontal bar to given strength. •Pole height from ground: 8ft •Anchor fastener Foundation depth: 1ft •Pole Colour: coated with zinc primer and cover with PU coated oil paint (Yellow colour) •Aluminium Composite Panel should be 3mm thick. It should be exterior face coil coated. Interior face coil coated with polyester. •Vinyl media should be 3M and its equivalent quality, Outdoor grade and weather resistant. •All photographs, content, graphics should be created by agency and have copyrights of all photographs, content, graphics and all other things used in panels. Final design should be approved by committee appointed by the dept. Size : 8' X 12'