S/R to Nalagarh House near Gopal Mandir at Boileauganj Shimla-4 (SH- Dismantling work, P/F roofing, Gutter, Steel Work, Paneled glazed shutter, Cupboard, Ceiling, Edge wall in garden, Inter locking pavers at entrance etc.)

Amount

Demolition below G.L. upto all depth and disposal of unserviceable materials within all lead and lifts.Un-reinforecd cement concrete upto 15cm thickness including carriage of materials within all leads and lifts.

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within all leads and lifts:-G.I. Sheet roofing.

Dismantling cement asbestos celotax/hard board/ POP tiles in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within all leads and lifts including carriage of materials (Frame work such as joists, beams to be measured and paid for separately).

Dismantling ballies in posts, purlins or rafters including stacking the materials within all leads and lifts including carriage of materials.

Dismantling of wooden floors upto floor all level including stacking of serviceable materials and disposal of un-serviceable materials including carriage of materials within all leads and lifts. (joists to be measured and paid for separately)

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them including carriage of materials within all leads and lifts.

Excavation in foundations, trenches etc. in all kinds of earth work including spade work, pick work, jumper work blasting work including where blasting is prohibited and chiselling/ wedging out of rock etc. upto all lifts stacking the excavated soil not more than 3metres clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and lifts as directed by Engineer-in-charge.

Stone soling properly hand-packed filling interstices with Kharanja stone including spreading watering of binding materials moorum or earth etc. complete as per HP.PWD specification 150mm spread thickness (finished work including materials and labour) including carriage of materials within all leads and lifts.

Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of centring and shuttering including carriage of materials in all leads and lifts :-Foundations and plinth

Providing and laying cement concrete 1:4:8 (1cement : 4sand : 8Graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. including carriage of materials in all leads and lifts.

Providing and laying cement concrete 1:2:4 (1cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts.

Dubbing out an old irregular walls average 10mm thick with Cement mortar 1:6 (1 Cement : 6 Sand) including carriage of materials in all leads and lifts.

Random rubble masonry / polygonal rubble masonry (uncoursed / brought to courses) with hard stone of approved quality in foundation and plinth in cement mortor 1:6 (1 cement :6 sand) in breast walls and retaining walls including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Stone filling behind retaining wall including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position complete including carriage of materials within all leads and lifts in 2nd class deodar wood.

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position complete including carriage of materials within all leads and lifts in 2nd class deodar wood.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position complete including carriage of materials within all leads and lifts in 2nd class kail wood.

Providing and fixing 35mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws including carriage of materials within all leads and lifts as per direction of Engineer-in-charge in 2nd class deodar wood.

Providing and fixing 35mm thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge in 2nd class deodar wood.

Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) 6mm thick ply inclding carriage of materials within all leads and lifts.

Providing and fixing 40mm x3mm flat iron hold fast 40cm Long including fixing to frame with 10mm diametre bolts and nuts and wooden plugs and embeding in cement concrete block 30cm X 10cm X 15cm, 1:3:6 (1 cement : 3 sand:6 graded stone aggregate 20mm nominal size) including carriage of materials within all leads and lifts.

Providing and fixing 12 mm thick particle board lining/ flooring with butt jointing and nails (frame work and cover fillets to be measured and paid separtely) including carriage of material in all leads and lifts.

Providing eaves board 200mm X 25mm thick including fixing in position in 2nd class deodar wood including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing weather board 100mm X 25mm thick including fixing in position 2nd class deodar wood including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing hard wood plain square edged cover fillets (beading) 50mm x12mm section, with wood screws in ceiling and lining including mitring at junction including carriage of materials within all leads and lifts.

Providing and fixing 250mm X 16mm size aluminium sliding door bolts with screws and nuts etc complete including carriage of materials within all leads and lifts.

Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials within all leads and lifts:- (i) 200mm X 10mm size

150mm X 10mm size

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete including carriage of materials within all leads and lifts:-(i)125mm size.

100mm size

Providing and fixing 19mm thick Commercial Board shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete including carriage of materials within all leads and lifts.

Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints and fixing with nails and screws etc complete including carriage of materials within all leads and lifts.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. including carriage of materials within all leads and lifts.

Providing and fixing hard wood square edges cover fillets (beading) 19mm x 6mm section including mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts.

Providing and laying ceremic tiles 5.50mm thick.of approved size, shade and design in flooring, treads of steps laid on a bed of 12mm thick in cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement including carriage of materials within all leads and lifts.

Providing and laying white glazed tiles 6mm thick of approved size, shade and design in skirting risers of steps and dado 12mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including carriage of materials within all leads and lifts.

Providing and fixing 1.50mm thick PVC/ rubber tiles flooring of L.G. make or equivalent plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately) for payment complete in all respects as directed by the Engineer-in-charge including carriage of materials in all leads and lifts.

Providing and laying granite stone of approved shade in flooring 20mm (average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete in 20mm thick including carriage of materials within all leads and lifts.

Providing and laying heavy duty pre-polished precast cement conrete inter locking paver blocks of NTC make or equivalent of approved design and shade vibro compacted of approved design, shade and size border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (Sub base concrete floor to be paid for sepretarly) 60mm thick block including carriage of materials within all leads and lifts.

Providing and fixing plain pre-polished checkered tiles of approved shade, design 25mm thick NTC make or equivalent laid in floors, treads of steps and landings on a bed of 25mm average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of grey shade including carriage of materials within all leads and lifts.

Providing and fixing corrugated G.I sheet roofing fixed with galvanised iron J. or L. hooks bolts and nuts 8mm diametre with bitumen and G. I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses complete including carriage of materials within all leads and lifts in 0.63 mm thick sheet.

Providing and fixing 15cm wide 45cm overall semicircular plain G.I. sheet gutter with iron brackets 40mm x 3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design including carriage of materials within all leads and lifts:- 0.63mm thick sheet.

Fixing corrugated G.I sheet roofing fixed with galvanised iron J. or L. hooks bolts and nuts 8mm diametre with bitumen and G. I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses complete including carriage of materials within all leads and lifts in 0.63 mm thick sheet. (Labour Rate)

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.50 kg/sqm including filling the joints with approved adhesive and inclunding require No. of coller and clamps etc. complete including carriage of materials within all leads and lifts:- (i) 110mm nominal size.

Providing and fixing M.S. welded mesh 25mm X 25mm X 2mm thick as per approved design complete by welding with electrical plant complete including applying priming coat of red lead paint as per HP.PWD. Specification 1990 Volume-I and including carriage of materials upto all leads and lifts by mechanical means and manual labour and as directed by the Engineer in Charge.

Providing and fixing PVC Finolex plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts (i) 110mm nominal size.

Providing and fixing polycarbonated transparent sheet 2.00mm thick in roofing with self drilling screws along with washers etc. complete with all accessories as required in all leads and lifts as per direction of Engineer-in-charge.

Steel work welded in built up sections in trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint:-In beams joists, chanels, angles, tees, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafter, purlins connected to common rafters and the like including carriage of materials in all leads and lifts.

Providing and fixing 0.63mm thick PGI sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamal paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts in With enamal paint other then white.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting including carriage of materials within all leads and lifts in Readymixed paint brushing with white lead for priming.

Painting two coat (excluding priming coat)on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping including carriage of materials within all leads and lifts in With white enemal paint.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete including carriage of materials within all leads and lifts.

KRISHAN KUMAR SHARMA