Construction of Mini Community Hall at Ganthi Nagar AD Colony in Melathaniyam Panchayat

Amount

Construction of Mini Community Hall at Ganthi Nagar AD Colony in Melathaniyam Panchayat

EARTH WORK EXCAVATION and depositing on bank with initial lead and lift in cll clauses of soils such as hard stiff clay stiff black cotton soil hard red earth, sharles, murrams, gravel, stoney earth and mixed with 50% of fair sized boulders etc. coplete as per S.S.20B for narrow foundation

FILLING WITH M.SAND including cost and conveyance of sand to work site including all labour charges for filling etc complete

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for foundation all materials to site and labour charges etc. complete

Brick work in cement mortor 1:5 mix using country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including cost and conveyance of all materials of all materials to site and labour charges etc. complete

Centering charges for all R.C.C works including cost and conveyance of all materials to work and all labour charges etc., Rate for

R.C.C. 1:11/2:3 MIX USING 20MM HBG METAL including cost and conveyance of all materials to work site and all labour charges etc.complete

Supplying and fabrication of steel rods including all cost and conveyance and all labour charges and all other incidental charges.

Supply of Steel New Door including all cost and conveyance and all labour charges and all other incidental charges.

Steel Door 0.90 x2.10m

Steel Window 0.90 x1.20m

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

PLASTERING WITH CEMENT MORTER 1:5MIX 12MM THICKNESS including cost of conveyance of all materials to work site and all labour charges etc. complete

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

White washing two coats using shell lime including cost and conveyance and all labour charges etc

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Exterior Emulsion two coats Painting including cost of lime blue power, fevicol type gums, brushes , scaffolding charges etc

Painting two coats using Enamel Paint for new Iron Work as steel ,Windows , Door , Ventilatorsetc., with best approved first quality of sythenic enamel paint of approved colur over the existing the priming coats., completed

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. swithc box and 5A F.T. switch with painting of suitable colour for open PVC FAN point and Light Point

Supply of 3 plug point including all labour charges etc., completed (AS per S.D.35)

Supply and fixing of 4-18W LED tube with fitting inclusive of all charges

Supply and fixing of 1200mm(48") AC ceiling FAN completed with stepped electronic 300w regulator with 300mm down rod on the existing clamp (As per SD.106)

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 63

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 1 & 17 of Section 2 of Instruction to Bidders (ITB) of SBD)

S.Regunathan (BID ID -1427975)