PERIODICAL SERVICES WITH FLOORING PLASTERING, SANITARY, PLUMBING FITTINGS AND MISC B/R WORK IN ZONE A AREA OF AGE B/R-I (CENTRAL) UNDER GE(CENTRAL) KHADKI

Amount

M & L for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 on wall with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed by Engr-in-charge. (Note : water proofing compound shall be measured & paid separetely)

M & L for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 on wall with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed by Engr-in-charge. (Note : water proofing compound shall be measured & paid separetely)

Supply only water proofing compound complete all as specifed and as directed by Engr-in-charge.

M & L for Rendering 15mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection, facia,fins,parapet with WPT etc. and similar likes upto height 10 mtr including necessary scaffolding, ladder, formwork and including taking down cement/lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

M & L for preparation of new plastered surfaces of ceiling, chhajjas, roof projection, facia,fins,parapet etc and applying three coats of white wash complete all as specifed and as directed by Engr-in-charge.

M&L for preparation of new plastered wall surface and applying two coat of oil bond distemper emulsion white or tined over one coat of Priming plastered and other surfaces with alkali resistant priming paint, on plastered surfaces, preparatory on wall complete all as specified and directed by Engr-in-charge.

M & L for preparing new plastered surface of walls and applying two coat of cement base paint at any height including necessary scaffolding ladder etc complete all as specifed and as directed by Engr-in-charge.

M & for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

M & L for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion upto height 10 mtr etc complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old plastered /concrete surface of ceiling and applying two coats of oil bound distemper emulsion, white or tinted upto height 10mtr including 1mm thick birla white putty over a coat of primer necessary scaffolding etc complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old plastered or unplastered surface of wall and applying one coat of oil bond emulsion, white or tinted complete all as specified and as directed by Engr-in-charge.

M & L for complete removal of existing treatement and preparation of old plastered surface of internal wall an applying two coat of luster paint over two coat over two base coat/two coats of primer as per manufacurer instructions, and as complete all as specified and as directed by Engr-in-charge.

M & L for complete removal of existing treatement on wall surfaces of any description including brooming down with steel wire brushing , scrapping down smoke soot's, moulds , moss and efflorescence, salts, trading oil greasy spots etc and applying two coats of Anti fungal weather proof grade exterior Acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm/Ltr as per manufacturer instructions and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 Ltr per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface in subsequent coats of paint upto height 10 mtr including necessary scaffolding etc complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old plastered or unplastered or concrete surface of walls, and applying one coat of cement base paint upto height 15mt including necessary scaffolding etc complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old plastered or unplastered surface of walls and applying two coats of cement base paint of approved tint upto height 15 mtr including necessary scaffolding etc complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specifed and as directed by Engr-in-charge.

M & L for plain cement concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) as in sub base complete all as specifed and as directed by Engr-in-charge.

M & L for plain cement concrete (1:2:4) type B-2, 100mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

M & L for plain cement concrete (1:3:6) type C-2, 75mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

M & L for cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in bed block, benching, kerb, mud stop, rounded or chamferred on edges, coping including necessary formwork wherever required complete all as specifed and as directed by Engr-in-charge.

M&L for Rubber moulded coloured glossy finish (Red, Yellow & Black) precast concrete interlocking paver blocks with grey cement and pigment any shape and size, shade as approved by GE, 60mm thick conforming to IS 15658-2006 M-35 grade and interstices filled with sand including 40mm thick sand cushion and including demolition of existing tiles and removal outside the MoD land complete all as specified and as directed by Engr-in-charge.

M & L for Chequered cement concrete rubber moulded coloured tiles glossy finish 300mm x 300mm x 25mm thick , set jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed of cement mortar (1:4) including pointing with white cement with pigment to match the shade of tiles including demolition of existing tiles and removing the debris outside the defence land complete all as specifed and as directed by Engr-in-charge.

M & L for Providing precast cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate) as in louvres and jallies, 40 mm thick and Set in Cement Mortar 1:6 including demolition of existing RCC jallies and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

M & L for vitrified tiles 8-10 mm thick (square/rectangular) polished area of each tile n. exc 0.36 sqm in floor over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

All as per Ser item No 25 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

All as per Ser item No 27 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

M & L for Glazed coloured ceramic tiles External/Internal in vertical surface 300mmx450mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed by Engr-in-charge.

M & L for Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge..

M & L for Machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed.

M & L for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specifed and as directed.

S & F 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed by Engr-in-charge.

S & F 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed by Engr-in-charge.

S & F in repairs 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor upto height 10 mtr etc complete all as specifed and as directed by Engr-in-charge.

S & F in repair for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced by Engr-in-charge.

S & F in repair PVC floor trap/Nahani trap 75mm complete all as specifed and as directed by Engr-in-charge.

S & F in repair 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specifed and as directed by Engr-in-charge..

S & F in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall upto height 10 mtr etc complete all as specifed and as directed by Engr-in-charge..

S & F in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specifed and as directed by Engr-in-charge.

S & F for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specifed and as directed by Engr-in-charge.

M & L for disconnecting of existing PVC tank of capacity Exc 250 Ltr & n. exc 500 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed by Engr-in-charge.

M & L for disconnecting of existing PVC tank of capacity Exc 500 Ltr & n. exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed by Engr-in-charge..

S & F in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap & PVC flushing bend fixed complete all as specifed and as directed by Engr-in-charge by Engr-in-charge.

S & F in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including 'P' or 'S' trap complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for vitreous china Urinal, half stall type white standard size (excluding flushing cistern flush pipe and waste pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing urinal spreader of PTMT any colour, grating and union for discharge pipe fixed complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets complete all as specifed and as directed by Engr-in-charge.

S & F in repairs PVC symphon with complete set any type/any size as per site requirement) for low level PVC cistern of 10 Ltr capacity as per sample complete all as specifed and as directed by Engr-in-charge.

S & F in repair for 15mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specifed and as directed by Engr-in-charge.

S & F in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specifed and as directed by Engr-in-charge.

S & F in repairs Central hole basin Mixer chromium plated Hot and cold with copper pipe complete all as specife and as directed by Engr-in-charge.

S & F in repairs Wall Mixer telephonic type chromium plated with CP wall flange complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for PVC flush pipe/Bend (long/short) for low level PVC flushing cistern 40mm bore etc complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, fixed complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for PVC connection 15mm dia and 90 cm long with 2 Nos PTMT nuts, fixed complete all as specifed and as directed by Engr-in-charge.

S & F in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as specifed and as directed by Engr-in-charge.

S & F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specifed and as directed by Engr-in-charge.

S & F in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specifed and as directed by Engr-in-charge.

S & F in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specifed and as directed by Engr-in-charge.

S & F in repair Rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed by Engr-in-charge.

S & F in repair Rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed by Engr-in-charge.

S & F in repair Sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and waste ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x355mm x165mm complete all as specified and as directed by Engr-in-charge.

S & F for PVC bathroom cabinet mirror 600x450mm including all necessary arrangement and fitting complete all as specified and as directed by Engr-in-charge.

S & F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed by Engr-in-charge.

S & F in repair for Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15mm bore (Minimum weight 142 gms), complete all as specified and as directed by Engr-in-charge.

S & F in repair for Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20mm bore (Minimum weight 210 gms), complete all as specified and as directed by Engr-in-charge.

S & F in repairs for vitreous china white urinal partition of size 310 x 700mm fixed to wall with brass CP screws fixed complete all as specified and as directed by Engr-in-charge.

S & F in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed by Engr-in-charge.

S & F in repairs of PVC opening cover with hinges and locking arrangement for PVC water tank of capacity n. exc 500 Ltrs complete all as specified and as directed by Engr-in-charge.

S & F in repairs of PVC opening cover with hinges and locking arrangement for PVC water tank of capacity exc 500 Ltrs but n. exc 1000 Ltr complete all as specified and as directed by Engr-in-charge.

M & L for Grinding & mirror polishing of old kota stone/marble/baroda green floor/cudappah stone slab /skirting with machine to mirror polish finish in and including making good of wall finishes as per oroginal specification complete all as specified and as directed by Engr-in-charge.

M & L for Granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

M & L for vitrified tiles 8 to 10 mm thick (square/rectangular) polished area of each tile exc 0.42 sqm but n. exc 1.00 sqm in floor over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

All as per Ser item No 80 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed by Engr-in-charge.

L.K.R.TIWARI CONSTRUCTION

tulsani associates

SHAH BUILDERS

the bhimani group of companies