Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAccepted-Finance VILL P O NARIT P S AMTA DIST HOWRAH PIN 711413 | HOWRAH | WEST BENGAL | 711413 | ₹23.4 L | L1 | Accepted-Finance Accepted Financially |
| 2 | L2₹23.5 LRejected-Finance 3 C DR JAGABANDHU LANE KOLKATA 700012 | KOLKATA | KOLKATA | WEST BENGAL | 700012 | ₹23.5 L | L2 | Rejected-Finance Rejected Financially |
| 3 | L3₹25.5 LRejected-Finance 2ND FLOOR KAMARHATI 1 GRAHAM ROAD KAMARHATI KAMARHATI KOLKATTA WEST BENGAL 700058 | 24 PARAGANAS NORTH | WEST BENGAL | 700058 | ₹25.5 L | L3 | Rejected-Finance Rejected Financially |
| 4 | L4₹31.0 LRejected-Finance 28 SAMBHU BABU LANE KOLKATA 700014 | KOLKATA | KOLKATA | WEST BENGAL | 700014 | ₹31.0 L | L4 | Rejected-Finance Rejected Financially |
| 5 | L5₹31.2 LRejected-Finance | ₹31.2 L | L5 | Rejected-Finance Rejected Financially |
| Sl No | Description | Qty | Unit | MONDAL ELECTRIC CO. L5 | M/s Singh Electrical Works L4 | S. A. ENTERPRISE L2 | CHAKRABORTY ENTERPRISE L3 | ELEGANT POWER L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply and installation of outdoor Feeder Piller Box of required size approved by EIC. The body portion of the piller box made of 2mm thick MS sheet and bottom and top portion with 4mm thick MS plate regidly fixed by nuts, bolts, washers etc. The piller box having both side door opening with suitable handle in each door, special almirah type locking system | 1 | Set | 3,81,000 ₹3,81,000 | 3,80,400 ₹3,80,400 | 9,36,500 ₹9,36,500 | 11,55,000 ₹11,55,000 | 3,80,397 ₹3,80,397 |
| 1.01Additional provision for pad locking is also to be provided at bottom portion. Provision of ventilation grill should be triangular shape made of MS plate duly welded to lateral side, the central ventilation spot at starting surface of the top of the piller box. Provision for 2 numbers earthing terminal by 40 x 6 mm GI flat having suitable nuts bolts washers for connecting the accessories with necessary interconnection between incoming & outgoing switches by suitable size cu flat/wire/rod duly sleeved & insulated through collar. | ||||||||
| 1.02The inside of pillar box will be painted by 1 coat of redled/zinc chromate and the outside will be painted by 2 coats of synthetic enamel paint over 1 coat of redled/zinc chromate and MS plate at bottom portion with two coats of "Black Japan" paint after finishing the paint properly The internal EI works of piller box should be suitable to withstand 2KV for one minute. All fabrication work should be done as per drawing and direction of EIC. The piller box comprising with the following- INCOMING: a) S&F 415V, 630A TPN SFU open execution with 3 nos DIN type HRC fuse - 2no (Make: L&K/ABB/siemens) b) Castle lock with key set - 2set (Make: L&K/ABB/siemens) BUSBAR: 415V, 1000A, 4bar Copper Bus bar as per G.S OUTGOING: a) S&F 415V 250A TPN SFU open execution with 3nos DIN type HRC fuse - 2nos (Make: L&K/ABB/siemens) b) S&F 415V 200A TPN SFU open execution with 3nos DIN type HRC fuse - 7nos (Make: L&K/ABB/siemens) c) S&F 415V 160A TPN SFU open execution with 3nos DIN type HRC fuse - 10nos (Make: L&K/ABB/siemens) d) S&F 415V 63A TPN SFU open execution with 3nos DIN type HRC fuse - 2nos (Make: L&K/ABB/siemens) e) R,Y,B Indication lamp set - (24x3)Set (Make: L&K/ABB/siemens) f) Pilot lamp - 2nos (g) S&F EI danger board (6"x4") - 2nos h) 4 Pole Outgoing Connector - 16Nos (Make: L&K/ABB/siemens) i) Internal wiring from SFU to outgoing connector with FRLS copper wire and complete with lugs etc. Diagram with detailed description to be approved by EIC before fabrication or manufacturing of the panel. | ||||||||
| 2.00 | Installation of the above piller box with brick / concrete foundation of required size with hard jhama cement morter soaling at bottom 300mm below GL & 450mm above GL neatly plastered & neat cemented finish as per direction of the EIC. | 1 | Job | 10,000 ₹10,000 | 9,520 ₹9,520 | 2,500 ₹2,500 | 10,500 ₹10,500 | 9,500 ₹9,500 |
| 3.00Supply of 4 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / Havells / Gloster as approved by E.I.C] | ||||||||
| 3.01 | 4core 300sqmm | 455 | Mtrs. | 4,750 ₹21,61,250 | 4,710 ₹21,43,050 | 2,365 ₹10,76,075 | 1,985 ₹9,03,175 | 3,150 ₹14,33,250 |
| 3.02 | 4core 150sqmm | 75 | Mtrs. | 1,950 ₹1,46,250 | 1,945 ₹1,45,875 | 1,226 ₹91,950 | 1,080 ₹81,000 | 1,650 ₹1,23,750 |
| 3.03 | 4core 120sqmm | 75 | Mtrs. | 1,590 ₹1,19,250 | 1,585 ₹1,18,875 | 997 ₹74,775 | 858 ₹64,350 | 1,300 ₹97,500 |
| 3.04 | 4core 70sqmm | 125 | Mtrs. | 1,020 ₹1,27,500 | 1,010 ₹1,26,250 | 631 ₹78,875 | 542 ₹67,750 | 1,000 ₹1,25,000 |
| 4.00 | Supply & Fixing of perforated GI cable tray with perforation not more than17.5% suspended from ceiling incl.S&F GI connector,6mm dia MS suspender, bolts & nuts,steel fastener etc.as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG) with 25x25x3mm angle iron support | 50 | Each | 370 ₹18,500 | 371 ₹18,550 | 370 ₹18,500 | 855 ₹42,750 | 367 ₹18,350 |
Tender Value
₹23.5 L
EMD Value
₹47,000
Closing Date
6 Jan 2026, 12:00 pmClosed
Exe. Engr.-I, Kol. South Health El. Divn., PWDte
75 D H Road Kidderpore Kol_23
SITC of Feeder Pillar Panel For Power Distribution Segregation at Cardiology Building under I.P.G.M.E.R.-S.S.K.M. Hospital, Kolkata
2025_WBPWD_965618_1
WBPWD/EE-I/KSHED/Q74/25-26
Open Tender
ELECTRICAL WORKS ORG
60 days
Kolkata
Please refer Tender documents.
4 documents required · 4 mandatory
₹47,000
O/o Exe. Engr., Kol. South Health El. Divn., PWDte
12 Mar 2026
2 Dec 2025
8 Jan 2026
2 Dec 2025
6 Jan 2026
9 Dec 2025
8 Dec 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid