Construction of ekalavya model residential school at Nichar in Distt Kinnaur SH Providing EI i hostel block 2Nos therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group B.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group B.

Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink,with anti glare polycarbonate diffuser and energy efficient constant integral,electronic driver,suitable for input voltage:AC 220-240 V,50/60Hz,complete with all accessories,including mounting clips & loop in loop out wire,connections,testing and commissioning etc.as required with two year warranty. Make:Philips,GE,Twinkle or any other approved by Engineer-in-Charge.

LED Batten Light 20 W 1200mm

Providing & Fixing of LED 3W Table side Spotlight fixture made of stainless steel housing. suitable for input voltage: AC 220-240 V, 50/60Hz complete with all accessories including making connections, testing & Commissioning etc. as required. Make: Mayfair, Havells, Philips or any other approved by Engineer-in-Charge.

LED Table Side Light 3 Watt

Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink,with anti glare polycarbonate diffuser and energy efficient constant integral,electronic driver,suitable for input voltage:AC 220-240 V,50/60Hz,complete with all accessories,including mounting clips & loop in loop out wire,connections,testing and commissioning etc.as required with two year warranty. Make:Philips,GE,Twinkle or any other approved by Engineer-in-Charge.

LED Batten Light 10 Watt. (length 2 Feet)

Providing and installation of surface and wall mounted LED Rayline Rechargeable Light, provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with minimum 2 year warranty suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, Make:Philips,GE,Twinkle or any other approved by Engineer-in-Charge.

LED Emergency Light 6 Watt.

Providing and installation of following type of Surface mounting round type LED Downlight in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required. Make:Philips,GE,Twinkle or any other approved by Engineer-in-Charge.

LED Downlight 6 WH RD

LED Downlight 15 WH RD

Providing and installation of following type of Fress Air Ventilating fan Non-metallic range with lower Shutter of following sizes in the existing opening, including making the hole to suit the size of the fan, making good the damages, connections, testing and commissioning etc. as required. Make: Havells, Khaitan, Bajaj, Crompton, Standard or any other approved by Engineer-in-Charge.

Fresh Air Ventilating fan 250 mm sweep

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

50 Liter capacity water heater (Cat-A)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 35 sq. mm (3.5 core)

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub-main wiring/cable as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Supplying and fixing G.I. tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x16 Sq. mm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 Nos HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

4x1.5+2X1.5 Sq. mm.

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 2x25 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.16 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole 5/6 Amp. Cat-A.

Single pole 15/16 Amp. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-4 way

Double door-12 way

Providing, fixing and installation of following rating and breaking capacity MCCB with Thermal Release Having inbuilt Overload and Short Circuit Protection in the existing cubical panel board including drilling holes in the cubical panel, suitable for input voltage: 415/500 Volt AC, 50 Hz, complete with all accesories, including making connections, testing and commissioning etc. as required, Make: L&T, Havells or any other approved by Engineer-in-Charge.

MCCB DN0-100D 3-Pole 32-100 Amp, Breaking Capacity 36-KA

Providing, fixing and installation of following rating and breaking capacity MCCB with Thermal Release Having inbuilt Overload and Short Circuit Protection in the existing cubical panel board including drilling holes in the cubical panel, suitable for input voltage: 415/500 Volt AC, 50 Hz, complete with all accesories, including making connections, testing and commissioning etc. as required, Make: L&T, Havells, Standard or any other approved by Engineer-in-Charge.

MCCB DN2-250N 4-Pole 250 Amp,Breaking Capacity 50-KA

Supplying and fixing of MCCB Enclosure,suitable for 3-pole or 4-pole MCCB, on surface / recess, complete with tinned neutral link, earth bar, din-bar, detachable gland plate, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Make: L&T, Havells or any other approved by Engineer-in-Charge.

MCCB Enclosure Size-I for DU100H/DU125H/DU100D/DU125D/DN0

MCCB Enclosure Size-II for DU250C/DU250/DN3

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars Each of length 450mm & cross-sectional area (25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 300 Amp. 415 volts capacity with 4 No. copper strip bus-bars Each of length 450mm & cross-sectional area (31.75mmx6.35mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx500mmx200mm) nominal with all accessories including connections, earthing the body etc. as required:-

ARUN KUMAR SHARMA